World's Lightest and Quietest 3-inch Cinewhoop 😲

[@AlbertKimTV]

🛒 Complete parts list... Prop Guards - bit.ly/37SAlUj Frame (see alternates below) - bit.ly/2ZfOg2H (get cut by cncmadness.com) Motors - bit.ly/3nOY6C2 | bit.ly/3nVp7Um FC - bit.ly/2Sujora | bit.ly/37SAib5 (alternate) VTX - bit.ly/35rMm0q | bit.ly/3hLVlyn Cam - bit.ly/2KVaa6e | bit.ly/3hmozo8 (alternate) RX - bit.ly/3nOFa6t | bit.ly/2WQmibq (alternate) Props - bit.ly/2KU2MrL 3D Parts - bit.ly/2X1qKEi 📺 Additional videos... Office Flight - kzbin.info/www/bejne/qpLYeoueaMp_fbM Park Flight - kzbin.info/www/bejne/aJnUoYRsp9qLrcU 1303 5000kv motor toothpick - kzbin.info/www/bejne/l3XYmZ-inrl_hrM Camera Butter ND Filter - kzbin.info/www/bejne/hafSqoKpZs2oh7M naked GoPro vids - bit.ly/2WRKnz5 Rubber Band video - kzbin.info/www/bejne/eXSoYYtpZcmrqrc If you have built a naked GoPro cinewhoop lighter than 65g and it's a 3-inch (not a 2-inch, 40mm, 31mm, etc), then I would like to see what it is. Please post a photo to Instagram and tag @marblekit. The AMAX 1303 motor seems to be lighter than other brands so get those if possible. Frame alternatives... bit.ly/3nZZIsY bit.ly/3gwjysM 🙏 Please support with a 👍 and don’t forget to hit the 🔔 thanks! 👉 Old gear for sale here - bit.ly/AlbertGearFS 💲 Get the latest exclusive coupon codes (updated often) bit.ly/34SYiGn

[@tylerharris9709]

YES THE VIDEO IS FINALLY OUT! Those teasers were getting me very excited

[@ZukiManDan]

I agree I hate how loud they are too. nice work on the drone. I agree I bet there will be one out soon.

[@RCRitterFPV]

just got the BetaFPV 95v3 and it screams. wife is not happy... perfect timing.

[@AlbertKimTV]

Screams? Really that loud 😂?

[@RCRitterFPV]

@@AlbertKimTV well... for reference My previous is a meteor 75. It is much louder than that, Can't fly it in house while people try to watch tv. not sure Neighbors want to hear it at all hours, I really want to be able to just cruise around and not disturb people.

[@RCRitterFPV]

AUW with the SMO and 4s 450 is 187g

[@shadowofchaos8932]

The cinewhoop Gnat! Perfect for indoors and outdoors for people.

[@TheConfigurat0r]

Your channel is underrated, Sir. Keep up the good work.

[@divingfalconfpv4602]

Crazy that this is almost half the weight of my 95x (my tarsier and extra tpu parts add some weight ) Could cut half the prop guards and get it to 60 on the dot.. the tips of the arms don't need to protect motor anymore with prop guards

[@AlbertKimTV]

I suppose those could be cut off. Save 1g maybe?

[@divingfalconfpv4602]

@@AlbertKimTV I was looking at building a tp3 or 4.. I should get these parts double as cinewhoop

[@maadfisher]

Interesting concept, I can see this having a place for filming around people and nature without disturbing them as much. Just be careful not to crash.

[@AlbertKimTV]

Remember this is also only 125g so even crashes aren't that hard on this.

[@Loz348]

@@AlbertKimTV at 125g even the lightest crash will destroy those prop guards, couple of crashes and you would be looking for a new frame

[@vaguedirector_7342]

Sweet build. Why use biblade props though? Triblades have always been noticeably quieter for me.

[@AlbertKimTV]

I wanted to save the 3g in weight but I think the 2-3dB lower sound volume might be worth the trade off. I'm also gonna experiment with the 5 bladed HQ prop too. Maybe even less noise?

[@vaguedirector_7342]

@@AlbertKimTV Oh yeah I have some of those 5 blades on order too for one of my lightweight 3 inchers. I feel like it will need a complete retune to fly well with them though.

[@vanlifefpv6340]

Really fantastic build! Amazing it's only 65g. I hope you block that troll who said he made one with a full size Hero 8 that was less than 25g. That's total bull.

[@AlbertKimTV]

Yeah, I blocked that guy. Troll was spewing nasty hate comments on all my videos. Bye bye loser!

[@metaldirtnskin]

Wow, looks perfect for small indoor spaces... I know there are a few other styles of those prop guards out there, I'm curious if any of them would allow for simpler motor mounting, without being way too heavy.

[@AlbertKimTV]

I've been looking around for other prop guards... where have you seen them?

[@metaldirtnskin]

@@AlbertKimTV BQE has some 3" guards in stock. They look heavier but maybe more durable? Worth a look anyway.

[@DeanF]

Great video; did you try mounting the prop guards on the other side of the arms? -thanks for all the advice Albert!

[@AlbertKimTV]

If you do that, then the props will hit the prop guard as I mentioned in the video.

[@sidewayslike3957]

Very cool! Hope a USA based company starts making these. Not a fan of waiting over a month to get products and this looks cool! People living in California are gonna love this build! Low noise! Totally awesome!

[@divingfalconfpv4602]

I like how when you say cinewhoop KZbin CC puts cinnamon lol

[@AlbertKimTV]

LOL... damn you autocorrect!

[@SOLARFPV]

The CineKim. Great idea 👌

[@AlbertKimTV]

Thanks!

[@TheJrobert86]

I know this is probably not made for speed but what kind of speed are you able to get out of this build?

[@AlbertKimTV]

On a good day maybe 35 mph?

[@UnknownIdaho]

I really like this build. I am a beginner mainly want a drone for nice, quiet cinematic stuff, not racing, so this sounds perfect! I wanted an Eachine Viswhoop but it looks like those are no longer available in 2022. Is there a complete kit of something like this one so I don’t have to spend months gathering parts? I’m not afraid of assembly or soldering as I have been building electronics since probably most of these guys were born…

[@AlbertKimTV]

For a simple conversion, try stripping the parts off the KT20 to the frame I have in this video. If you want something you can just fly, the CineLog30 is your best bet.... bit.ly/3yGPbsO

[@UnknownIdaho]

@@AlbertKimTV Thanks, I’ll check it out! I knew I subbed to you for good reason!

[@avtw9906]

hi, maybe you cam make the gopro hosing a small basket with holes.

[@kaizendon6237]

Good job, Albert, a good change to Cinewhoops, since the ducts aren't actually ducts anyways, using a thin prop guard makes it so much quieter, will you try using 5-bladed props?!

[@AlbertKimTV]

Thanks. I've got the new HQ 5-bladed prop. But I'm gonna try 3 bladed first to see if it will make less noise. I don't want to add more weight.

[@rdoc7818]

Very nice work man! I’m pretty new to the hobby so I’m sorry if you’ve covered this before. But is this kind of build possible with a Caddx Vista? I’m not interested in a GoPro for now. I just want something quiet and digital to fly around the house! Thanks and keep up the great work!

[@AlbertKimTV]

Yes, I plan to make a DJI version next. It will be heavier though.

[@rdoc7818]

@@AlbertKimTV Very nice! I look forward to seeing what you come up with!

[@LordFpv]

Wow,well done Albert.Happy new year ✨✨✨

[@AlbertKimTV]

Happy new year!

[@JohnMorawietz]

shorten lipo wires to dead minimum and loose the plug ends for bullets only (Im wondering if the lipo can work from the charging connector only so the red/bk wires could be nixed completely) lightening holes on the gp mount, cut a few of the prop guard inner legs, ca the inner most touching portion of the prop hoops, no iron fasteners (maybe twist ties in the center boards or hot glue only), you might shave another 10grams by then. You may be able to hog out the center of the main mounting plate for a few less grams as well. Probably the smoothest vid Ive seen yet.

[@AlbertKimTV]

Thanks for the suggestions... whew.... needs more work!!

[@JohnMorawietz]

@@AlbertKimTV did you see a flywoo 38min by dave-cfpv vid?. Nix gopro 10gram case = large pane area =drag. fpv through the gopro lens alone? would be nice to send commands to the gopro remotely as well. very cool stuff.

[@jlarson42]

Excellent overview and description of this simple but cool Cinewhoop. It's design makes sense for what it's meant to do. Thanks for sharing. Happy flying Albert 💖🤓

[@AlbertKimTV]

Glad you like it!

[@eskrace1104]

Great concept! Perfect for those who wants to film animals without scaring them for example 👌

[@divingfalconfpv4602]

You get me. Deer run even from my tiny hawk

[@eskrace1104]

@@divingfalconfpv4602 I was thinking more of the tame animals we got x)

[@divingfalconfpv4602]

@@eskrace1104 oh.. yea my dog likes my drones.. she chases it. Then runs from it. She boys it with her nose.. got videos of it somewhere lol.. mostly all I do with my drone is chase my dog lmao

[@rocketquad5888]

The personal innovations in this hobby make it awesome

[@TrentTationnaiseXization]

The NBD savage bee is pretty quiet. Could prolly work off of the 2s version. 43grams dry weight with crossfire and miniT.

[@AlbertKimTV]

Might make for an interesting conversion project

[@dthree4113]

Thanks for this. With the release of the new FAA rules, the rush to build the best light cinewhoop is on! Get that fully-loaded weight under 250g

[@amay8282]

Sooo Mr. Kim. Love the concept. Was just gonna ask you what would be the best lightest/quietest indoor/outdoor DJI explorer drone, Rocket Lite or Protek25 then I’m thinking just drop the naked GoPro and add a naked vista system on this beauty. Think it would work?

[@AlbertKimTV]

I'm already planning to convert this to DJI FPV with a naked Vista. I'll have a video eventually.

[@syluntbob6877]

@@AlbertKimTV what about a naked air unit and no go pro? Possibly 75g auw?

[@niuind545]

If you want quietness It will be a little heavier, but a 6-blade propeller is recommended. The noise becomes bass and less noticeable.

[@AlbertKimTV]

I actually already tested that but found it's noisier than three bladed. Seems 3-blades is the least noisy for this setup.

[@OinTaylor]

I'm not a CineWhoop guy, but this one is very cool, just based on concept and build. Bravo.

[@michaeljohnson6473]

I am wondering how much just the naked GoPro weighs?? Which Model is it??

[@AlbertKimTV]

28g. Hero 6 Black

[@twinturbostang]

If you have prop clearance, you might be able to zip tie the prop guards together for added strength.

[@JColoon]

Hi Albert, my props touch the guards with the amax motors. Did you put something underneath them?

[@AlbertKimTV]

Yeah, I talk about it at length in the video. Washers...

[@JColoon]

@@AlbertKimTV my bad. Will watch it again

[@RubyS.1]

It's crazy how quiet these 3 inch can be. I par with brushed 65mm. Durability weenies ha

[@rocketrob3324]

Albert, A heads up, the Baby Tooth Frame listed as "alternate" (RDQ) must be slightly smaller wheelbase than the Sanchex Air design as the prop guards are to close to each other and either want to overlap (over/under) or it flexes the frame arm upward which put the motors negative cambered from vertical. Has anyone else noticed this? Or as @Macelius FPV suggests, I could chop off the inside of the guards - solving this problem and saving some weight.

[@AlbertKimTV]

See m posting on the Crux3 conversion. I cut the inner part of the guards off in that case. instagram.com/p/CKKkJ_qLA25/

[@rocketrob3324]

@@AlbertKimTV Thank you Albert!

[@taatoken]

Can't wait to build something like this to capture slow backyard footage! Or even slow photography. This is exciting

[@AlbertKimTV]

Interesting... I had not considered photos for this. Maybe on a remote trigger?

[@deebeez7923]

Hi Albert, thanks for this. I’d like to build one, do you think the crazybee x AIO board would work? I imagine it would make the rig lighter, my only concern is if the ESCs are enough at 5A.

[@AlbertKimTV]

I am going to test that soon. I actually don't know how 5A ESCs will hold up. Wish me luck.

[@xymaryai8283]

i had this exact idea of a top mount fpvcycle babytooth! i wanted to see if something like a R3DWhoop Ion would do it too

[@cesarsommer]

Great build :)!! Also much more economic in battery run time - i wonder how long was the flight time?

[@AlbertKimTV]

4 minutes

[@billmcdonald4335]

LDARC makes hoops that are that size. They might be a more durable option, because they've got a rolled rim, which effectively thickens it without adding too much weight. They will weigh a little more, I think - but not too much. This build is a good idea.

[@AlbertKimTV]

😎

[@jbruell94]

Albert, this is really good! Love your design! Not sure if it's technically a Cinewhoop as you're using prop gaurds, not ducts. Thus the natural slowing effect will not be present. Either way, it's super cool!

[@AlbertKimTV]

No one uses the term cinewhoop like that anymore. Cinewhoops are generally anything with prop guards used for high quality video filming.

[@josephbove7477]

Very nice design. Great job!

[@AlbertKimTV]

Thank you! Cheers!

[@pastubbs]

I just built something similar to this, I'm using 3dprinted prop guards though which is killing my AUW. Definitely grabbing a few of the guards.

[@ragefpv6780]

Hey Albert, what’s the longest flight time you can get on something like this? What battery? I’m trying to identify a build like this for recon and intel.

[@AlbertKimTV]

If you're carrying the naked GoPro, you can go up to a 2S 750 and get close to 8 minutes flight time just cruising. If you need more, change the motors to 5000kv and go to a 3S 650mah. Maybe 10 minutes of cruising on that one. But the weight and noise level will go up.

[@ragefpv6780]

@@AlbertKimTV oh dude you’re a rockstar! Thank you. No naked GoPro required just trying to achieve long, mostly indoor, flight times with “compact” designs

[@andrewb9942]

Did I miss where there is audio recording of how it sounds?

[@AlbertKimTV]

kzbin.info/www/bejne/rH-XdX19qJqEeqM

[@gvngoheavy]

THANK YOU for doing this. I started down this path with a TP3 and ended up turning it into a pusher 85x that got sold pretty quick. This tho, is very very interesting.

[@motormat253]

great looking build. i have just inverted my betafpv 75 and a betafpv 65 waiting on a few parts to finish them, cant wait to fly them. Thanks for the vid Albert.

[@motome8]

This will be my next build after my long range.

[@SOULSHUN7ER]

Nice frame...Maybe you can put spacers under the prop Guards instead of under the motor?!

[@AlbertKimTV]

That could work too but the motors are completely stable and not loose so not sure it would matter much.

[@eliasreisinger3630]

Wow I didn't expect that it would be so light.

[@evFPV]

Wow Albert this is such an amazing approach... What I dont get is why you dont start your own line of quads? This idea has so much potential... I suppose that would be a lot of hassle and probably It would take Up so much of your spare time. As for shaving a few more grams, I would cut the inner sides of the prop guards and use Titanium screws... A shorter battery plug. And I would name it cinepick! 😃 Regards from Spain and Happy new year

[@alihachem2494]

I'm really sorry two bother you but I have two questions left so the first one is that for the amazon build what transmitter do I get and does the motor for it have to be a 6s or a 4s 😅

[@ojkolsrud1]

Very cool! Nice design too! You're putting a lot of mass in the front of the quad though, do you feel that while flying? Does the two front motors become hotter than the back motors? With everything else being so light, I would probably try to mount the GoPro closer to the COG prior to adding it. Also, I gotta say, ReelSteadyGO is *almost* like cheating. I'm sure this quad, even with the damping, vibrates or tosses a little bit when flying, but your footage looks incredibly good and stable.

[@AlbertKimTV]

The motors don't get hot because the 26g naked GoPro is not putting any kind of load on those motors. The motors have way too much power for the weight. It's slightly unbalanced but nothing the FC can't handle and you don't feel it at all in flight. I'll post links to raw footage that has not been processed through ReelSteadyGo. You'll be surprised how smooth this flies.

[@ojkolsrud1]

​@@AlbertKimTV Cool, man. How do you compensate for that through PIDs? My 5inch is a little ass-heavy, and I see it pitching on throttle-ups.

[@peternewman2192]

Great video quality Albert. Thanks

[@AlbertKimTV]

Glad you enjoyed it

[@dfouraksa.k6911]

May I ask how did you power the naked gopro? Im mostly using 2s and 3s once in a while with the betafpv bec board. Should soldering the cable onto fc vbatt + - should be alright for 2s?

[@AlbertKimTV]

Yeah, most of the time I just direct solder to the vbat. In other situations I use the stuff in this video... kzbin.info/www/bejne/aoCWfnyFg9KJpdU

[@jdnic1]

ive been thinking of this. i wanted something quiet with prop guards and the fact that this is HD is way better than my build.

[@rolisaenz]

That is a great build Albert, what is the max fly time , can you use 18650's ? and last!! can you mount an Insta 360 ? Happy Holidays !!

[@AlbertKimTV]

I get 4-4.5 min on a 2S 450mah lipo. 18650 might work but it will be very heavy. I wouldn't try it. Insta360 can work with this but I have not designed a mount for it.

[@rolisaenz]

@@AlbertKimTV i think there are a lot of 3d printer files floating around for the insta360, btw the insta 360 is lighter than the naked gopro right ?

[@AlbertKimTV]

@@rolisaenz Insta360Go is 18g, Naked GoPro is about 28g

[@rolisaenz]

@@AlbertKimTV 10grams is 10% more fly time :)

[@matthew04101]

tri-blade 2.5" props are about the same as bi-blade 3" props. but smaller frame, prop guards = lighter weight, harder to break. just an idea. another thing, would you try 1303 5000kv 2s tri-blade 3" props like gf3016 ? just to see how it would fly. thanks for your hard work.

[@AlbertKimTV]

Because the 2.5 inch props have to spin faster to carry the same weight, they make more noise so I gave up on that idea a while back. I wanted something less noisy and less concerned about overall size. The 1303 5000kv motor on 2S would still fly but will drain the battery faster I think. Shorter flight time but noise level would be the same.

[@pksteffen]

Nicely done! Great idea.

[@AlbertKimTV]

Thank you!

[@medrone7097]

Cine Feather! So cool!

[@LeshaRodin]

Do you have any ideas to make this frame work with insta360 go2? Wanna build this, but no idea how to mount insta

[@AlbertKimTV]

Sorry, no plans at this time.

[@trevorimpulsebuyguy6398]

I like your frankenwhoop. You have been coming up with some great designs. I think one of these companies like betafpv should be teaming up with you if they were smart. This was worth the wait, well done Albert!

[@valden]

Hey there Albert, would this work with a split cam like the tarsier? Neat build! 👍

[@AlbertKimTV]

It can be made to work but the results will not be as good because GoPro with ReelSteadyGo is very much superior.

[@johnk8825]

Albert, very nice looking and more useful cinewhoop type quad. I see more use for this than the noisy things on the market and you're right, expect to see more of them on the market. Well done.

[@russwishtart]

Thank you for inventing the CineWhoosh! Or just the Whoosh.

[@jeffwinder7010]

Maybe I missed it, but can you make a LOS video with it running? Would like to hear what it sounds like.. :)

[@AlbertKimTV]

Here's the video - kzbin.info/www/bejne/rH-XdX19qJqEeqM

[@jeffwinder7010]

@@AlbertKimTV Thanks!! :)

[@volkergoe]

Sweet build! You could go for 1106 to get rid of those spacers!

[@AlbertKimTV]

1106 motors weigh a lot more than the spacers and the power profile is way different. 1303 motors are better for smooth slower flight.

[@crossfirefpv414]

Cool..I wouldn't feel comfortable landing on the prop guard like that...maybe some 3d printed parts could help somehow with a thoughtful design

[@AlbertKimTV]

As long as the surface is flat it won't be a problem if you mount the motor/prop correctly as described in the video. So far no issues for me.

[@johanjansen4323]

Very nice and informative!!

[@AlbertKimTV]

Thanks!

[@Kapharnaum92]

Very nice concept!

[@AlbertKimTV]

Thank you!

[@shenanigan3083]

The aio diamond from happy model that's all I can think of. ofcourse ad a receiver and yes it's only 200mw vtx but that's not bad

[@divingfalconfpv4602]

Any plan on a insta360 Go Mount? (my naked broke lol)

[@AlbertKimTV]

Not right now. Both my InstaGo cams are broken now :(

[@divingfalconfpv4602]

@@AlbertKimTV Oh sorry to hear.. Not good time for electronics. Dumped my favorite drone in the water. Gone forever. and few weeks ago my naked gopro from flywoo broke. after only like 10 flights.

[@flylow3457]

Nice job Albert, I like the approach. I was pretty close when I suggested in the previous video comments that it might be the crazybee crux3 with some prop guards ✌️. No seriously, I still dont get how the different constructors in the hobby always tend to forget how much benefits we can get from designing ultralight builds, and go the opposite way. At some point I even wondered if it wasn't a strategic marketing decision to design heavier setups so that they can generate higher margins from more expensive embedded components and lipos.

[@AlbertKimTV]

The reason is because there is constant pressure from much of the FPV community to make drones "indestructible". They must survive hundreds of crashes or they should not exist. I'm one of the few people who don't subscribe to this dogmatic propaganda. Fly what you want to fly. Screw everyone else.

[@flylow3457]

@@AlbertKimTV you're probably right, it's a good reason, however I do wonder if this supposed big pressure for extreme durability isn't much exagerated by the brands. If we look at the recent huge success of the flywoo explorer lr, for me it really shows that people interested into very lightweight efficient setups (at the compromise of less durability) isn't a niche market at all. Do you know if some of the hobby brands are planning to release a bnf ultralight cinewhoop like yours anytime soon? I think happymodel for example already has most of the components needed to do this pretty quickly.

[@squaddingquads]

now thats epic

[@MCsCreations]

Amazing work, Albert! 😃 It seems to fly great! Happy new year! And stay safe there! 🖖😊

[@xxMrZipixx]

Wow! Less of 100g! Wonderful!

[@rzfpv2823]

Great flight 🔥

[@whileistillcan9338]

Love it. Hard to make it much lighter than that.

[@AlbertKimTV]

Thanks!

[@YourLocalIceMan]

Condo life must be interesting. There are times I wish I had less yard work to deal with. Pros and cons on either side. Nice bird but I am not a fan of the upside down props.

[@AlbertKimTV]

why don't you like inverted quads?

[@YourLocalIceMan]

@@AlbertKimTV mostly because where I fly. Indoor turf fields. Had issues with lose field turf and hair getting into the blades. Burned out a couple of motors. But once they are in the air no complaints here.

[@staltus]

Nice build.

[@AlbertKimTV]

Thanks!

[@DroneLoversFPV]

Sweeeeeeeeet, so smooth...

[@marsmachine1156]

Albert Kim the Dave_C of the Ultra Light Cinewhoop! Well done!

[@carlsverg]

So it's basically a babytooth (1303) with prop guards..I was expecting something more disruptive, but it's clear that this works 👌

[@AlbertKimTV]

It's so simple, I don't know why no one else already did this!?

[@badassdrones778]

Oh yeah I've been waiting for someone to do exactly that ! And yes it's gonna be cloned soon ;)

[@leonidkraljevic1263]

That's the way it needs to go . Cine will do the work ofc but I don't card i give the Kredit to you for the innovation. Keep the great job . And I wish you a happy new year.

[@davdaya]

Really ultralight 3" cinewhoop.. u got there.. Albert.. tis would rock the cinewhoop's community once more again.. 🥰👍

[@illusionistsam]

Oooo finally a nice whoop love your efforts brother what a great design 😍

[@illusionistsam]

I see those niceeee motors man i never knew you would them on this quad

[@matthew04101]

this is awesome. i want one.

[@tylerelliottFPV]

do you have footage of it with audio to hear how quiet it is?

[@tylerelliottFPV]

i guess this is it. kzbin.info/www/bejne/rH-XdX19qJqEeqM

[@AlbertKimTV]

See this video - kzbin.info/www/bejne/rH-XdX19qJqEeqM

[@illdogfpv6888]

I love it! Nice build.😊

[@AlbertKimTV]

Thank you! 😄

[@BlackhawkFPV]

Beautiful!

[@alihachem2494]

Hello I commented on the video the amazon build one like you said for my question

[@AlbertKimTV]

ok

[@MrPaulielie]

Nicely done man keep it up cheers 🍻

[@dronemacha]

Wish to see a 4s on a build like this, perhaps will build one 😅 wouldn't probably be as quiet..

[@AlbertKimTV]

If it's heavier, it will make more noise. If you want to go 4S, just go with a lower KV motor like 3600kv or so.

[@dronemacha]

@@AlbertKimTV I really appreciate your reply man... Will test it out, but looks like that 2s is a sweet spot for a quiet quad... I'm super impressed with this build you've done..

[@russellstageman3713]

A sound sample would have been welcome ...

[@AlbertKimTV]

That came out before this one... kzbin.info/www/bejne/rH-XdX19qJqEeqM

[@vit4min4s]

Nice one!!!

[@AlbertKimTV]

Thanks for the visit

[@pawelszczyrek7510]

Very helpful video

[@AlbertKimTV]

Glad it was helpful!

[@shurumellafpv8188]

very interesting, but hard to enjoy this little one with the Australian winds

[@AlbertKimTV]

This is really intended for indoor use...

[@ehaviv]

Verry Nice!!!

[@AlbertKimTV]

Thanks for the visit