The Spider Gear of this Differential got completely damaged then the Mechanic fixed it|| Amazing Job

The Spider Gear of this Differential got completely damaged then the Mechanic fixed it|| Amazing Job
Complete vedio
#restoration #repairing #differential
#spidergear
#mechanic #pakistanitruck #machine #amazing #gear

[@patrickflanagan8008]

An oil soaked mud floor covered with cardboard, no air tools, no hydraulic presses, not a torque wrench in sight, zero H&S....just get a tin bowl, a bit of rag, half a pint of petrol and get the parts cleaned. Then whack it all back together with a big hammer and an old coach bolt....no need for fancy drifts. That done, tighten it all up by bouncing your body weight on a long lever.....you have to see it to believe it. Amazing.

[@slickdoglong3669]

That young lady is 1 hell of a hand need him here in Ohio on the farm 👍❤

[@dokuchai]

Это правильные пацаны и они делают правильные редуктора! Respect! Если кто-то чего то не понял, не думайте, что они просто так разобрали и собрали )))

[@bertone6996]

This vedeo remember my self in south Italy when I was a little boy. Going to wuork at mechanic shop left school at 12 years old was the year 1981./82..all my respect for this hard working kids cheer from CANADA

[@hugh007]

I too, failed to see what repair was needed nor any new parts. Maybe they just had to add some floor-dirt to the gears and bearings. Amazing job for the tools they had, and just like a dealer: repair what isn't needed but not fix the customer complaint. A good video. Thanks

[@hernancoronel]

LOL!

[@HueLe-vq9to]

Bạn nhìn kỷ xem. Cốt chử thập đã bị sọc và rơ, có lẽ họ đã khắc phục rồi nên mới ráp lại đấy❤❤❤❤❤

[@user-ir8ms1gs9s]

А разбирали для чего, помыть и "отрегулировать"?

[@X_Killer.]

Ревизия🙂 подшипники, сальники меняли... Я на зилах за€бался эти дифы перебирать.

[@someone1089]

Good to see a video of hard working Makranis in coastal area of Pakistan. They are not just hardworking, but really nice people with a heart warming attitude.

[@Sibirsky_sibiryak]

Пойду на сварку посмотрю. Это полный трэш!!! Регулировка пятна контакта чисто по наитию типа с бородой в очках!! Я поржал, спасибо. Ни затяжка гайки ведущей шестерни путем стопорения ведомой - это ваще вышка! )))

[@user-bf4ee1cs6u]

Почти утраченное искусство автослесарей из страны Советов!:))) Я сам так много раз делал, но видимо уже отвык:))))

[@user-or1hp3nc2e]

Это Индия или Пакистан? Мир после 3-ей мировой войны. Оазис, где выжившие занимаются ремонтом оставшейся автотехники...

[@user-er1dh1nu9x]

Я тоже подумал, что весь навар забирает бородка в очках. Такой гламурный, разок мазнул, разок крутнул, разок поджал. Весь ремонт. Причём паучью как отремонтировали ни кадра! Люфт в наличии! Думаю масло менять не стоит, грязнее масло, толще клин 😆

[@voianoy34]

На коленке, в грязи и бьют молотком по резьбе. Культура производства та еще :-)

[@donrumata2802]

У нас аналогично

[@voianoy34]

@@donrumata2802 У меня соседи - ремонтники грузовиков. Там чистые отапливаемые помещения, приличное оборудование. И работники способные нам дать чертеж в электронном виде для изготовления редкой детали на ЧПУ.

[@dokuchai]

@@voianoy34 Сказочник! Все станки с ЧПУ продали партнёрам и в металлолом сдали. Да и токарей нет.

[@wilhelmwas]

Да. По резьба железкой тук-ьук, об бетон резьбой херась херась... зато быстро "сделали 😊 на совесть 😢"

[@propanbutan4634]

What I will never understand how these men have the nicest softest hands in the world working with chemicals I had dermatits for almost 4 years for wearing gloves to protect me from chemicals

[@nguyenkhanh6222]

Tôi là người Việt Nam, tôi rất ấn tượng với cách mà các bạn sửa xe... Chúc các bạn thật nhiều sức khõe và gặp nhiều may mắn trong cuộc sống...

[@wazzazone]

What a brothel your shop is. آپ کی دکان کیسا کوٹھا ہے۔

[@antonmyravev594]

Не совсем понятен смысл этого ремонта. Разобрать, помыть, на глаз отрегулировать и собрать обратно. Я бы просто масло поменял.

[@Bosjak63]

смотреть нужно внимательно, на крестовине дифференциала под сателиты они заменили опорные шайбы - убрали люфт.

[@antonmyravev594]

@@Bosjak63 вот именно внимательно посмотрите, пластины старые остались.

[@user-yy3ue3kw9f]

Тоже не уловил суть. Сам слесарь по ремонту MAN из Сургута. Показали выработку на крестовина, но не поменяли. Так я и не понял.

[@Don-du7du]

The dude checking the backlash is the quality control manager 😁

[@markjohnson9884]

I work with my dad pretty much the same way back in the mid 1960’s to 1971 on water trucks we owned in California. Clean cardboard was you friend either to lay on, or repair parts. Back then we used gas to clean parts at around $0.30 a gallon it was the cheapest cleaner you could find and always around. It wasn’t until just before his passing in 1971 we had a service truck, it had a welder and compressor on a flat bed. Other kids got to play after school or during summer months, my fun was helping dad!

[@twinkleupadhyayupadhyay7880]

Llĺmlĺl

[@PBMS123]

yeah exactly 60 years in the apst

[@wybuchowyukomendant]

Kid's in the vid's fun is working 6am to 10pm so he can eat, most likely.

[@user-cr1dr5oo4o]

Последняя гайка выглядит так, как будто её 50 раз откручивали

[@spencermacgillivray7777]

Very in lightning. Very amazing. Great job.

[@z400racerr910]

I love having sand and debris in my newly installed bearings

[@YuriKadirov]

Ребята ловко конечно работают. Но не понял - зачем разбирали то. При сборе подшипник хвостовика прослабили, должен быть с преднатягом. Ну ладно хоть пятно контакта гипоидной передачи отрегулировал. Скорее всего из за этого и снимали - мост загудел.

[@user-hp4rc6zp7f]

Сняли, разобрали, помыли, собрали. Бюджет освоили.

[@user-wj2tp5jl6e]

Меняли ось сателитов

[@dokuchai]

Ответ в названии ролика === Паучья шестерня этого дифференциала была полностью повреждена, после чего механик починил ее.

[@shubbakikuti2322]

os caras dibuiaram a diferencial e montou numa facilidade sem sobrar uma arruela!!! os caras são bão mesmo!!!

[@Dstromb232]

Great team work!

[@billthecat129]

The QA QC and level of health and safety demonstrated in this video is amazing!

[@GenXican84]

Rules are for the 1st World which can afford them.

[@claywebb8199]

Oh shut up please. There’s always some idiot like you saying these same old things again and again. Yes, we get it. You’re not the only one with a set of eyes fool. It all about $$$$$$ and they don’t have any for luxuries like work boots, glasses etc etc etc. why don’t morons like you understand this???

[@MrSupermugen]

noones probably been injured - they want to be there an work for money. no sick days etc.... first an only rule of places like this, dont get hurt or you dont get paid.

[@oliverheaviside2539]

They all have all their toes and fingers, so they can’t be that dangerous.

[@stevenhorne5089]

@@GenXican84 Really? How much money does it take not to roll the bearings in the dirt before installing them? How much money does it take to not throw your chemical waste on the ground? How much money does it take to not rip off the customer?

[@joshp.4297]

It's sad seeing such good workers working in these conditions.

[@rogertycholiz2218]

Josh ~ It's all they got - no more!

[@itsbalochvilloges8767]

What a great work mulla Arshad and boy's good job 👍

[@crazyloverxy]

6:14 The little worker catched some fuel in his eye! Life is difficult for some people,I hope our spoiled generation appreciate their life..

[@user-jb3xn1id2c]

Да вообще супер класс мужики на коленях всё делают -и им доверяют-просто улёт-а они супцы своего дела -респектище

[@crazyideasno1]

omg. i like good ideas

[@josepereira1487]

Essa equipe da forma trunk da vida real são os melhores pois não tem metade da tecnologias que as equipes tipo Ferrari etc tem e dão um show sucesso manos 😁

[@user-ee5qw7hh9z]

Ты тоже ржавые изношенные детали устанавливаешь в авто?

[@screwsnutsandbolts]

Great video ! 👍

[@user-pr3il4ot2e]

А в чём смысл ремонта? Разобрать дифференциал, разбить обоймы подшипников молотками, потереть тряпками с песком шестерни и всё это для того ,чтобы заменить сальник и наглаз при помощи молотка "откалибровать"?)))))

[@atterodominatus209]

я то же кроме сальника новых запчастей не увидел

[@gjgjd5920]

Шайбы в хвостовик и в дифф добавили, видимо был большой люфт на сателлитах

[@robertsmirnov1918]

@@gjgjd5920 шайба и консервной банки😁

[@gjgjd5920]

@@robertsmirnov1918 это не показали, может из сыромятины а может их и закалили

[@SaiyedR]

Very hard and intresting work👍

[@robertiggulden2998]

Back alley engineering...you cant help but admire it.

[@mik00144]

А зачем разбирали, если подшипники не меняли?

[@dokuchai]

Читай название ==Паучья шестерня этого дифференциала была полностью повреждена, после чего механик починил ее

[@thepubliceye]

I love the 300 FP torque hop on the pinion nut.

[@georgepaiva7496]

Yeah I like how he checks bearing preload

[@tomb816]

@@georgepaiva7496 Yeah, those angular contact bearings must be set w/ exactly 30, unbalanced, hammer blows 😉

[@Ray69Smith]

@@tomb816 Hell I thought it was just 9 solid ball dropping slams for the torque requirement !! 🥴😃

[@Zebpro]

Torque to spec at its finest!

[@Xedilian]

Nothing more skilled then seeing child labour in the work place. 2:10 Onwards. They must get paid alot! Not one of them are wearing gloves of glasses or steel capped boots. The fact these guys work like this with no injury is amazing! Wish my country could service this level of efficiency this is next level skills here.

[@wilburroth5150]

I`m impressed! In those working conditions and primative tools, and it stayed clean. Nice work.

[@JRS-iq9pz]

Not so sure how clean they stayed. LOL

[@isaurodominguez6055]

And what this confirms is when you're in the states when you pay your mechanic invoice all your pain for is that big ass establishment pretty TVs all them computers that you don't need and the owners vacations.... These young men and children are working hard no excuses bravo

[@user-ee5qw7hh9z]

Я так понял они его разбирали что бы помыть, посмотреть на изношенные детали и поставить их обратно?

[@user-sg1vv9xu6w]

Подшипник поменял

[@joedoakes8307]

Their Dirt Floor is SO saturated with gear oil , trany fluid , and has been compacted over time IT has become solidified and is their Work table !!!

[@wolverine1981pl]

respect to those guys for skills and knowledge to be able to take it apart and put it back but with all that dirt around i wonder how long this will last. i get they tried to clean it but still doesnt look it will last long

[@boatmanshuzz4030]

Love how they smash and throw precision components on the floor👍

[@juanmendoza9475]

In some places with all the commodities they would not be able to accomplish the job congratulation on a job well done

[@larrykrise3609]

you guy,s are awsome.larry in USA

[@agnewyelma9048]

How Wonderful would have been if those young kids go to schools .

[@TexasTough.]

They go to Yale university

[@user-yy5cd6gu8s]

That’s small boy u watch one day he will be owning a big mechanical work shop and he will be main boss good work work my son be careful

[@peterfrazer1943]

Excellent video and a very good clear picture. These lads having a good knowledge of the job and work hard. The young boy looked so happy at his work and will be supporting his Parents financially. A good lesson to the fat pampered kids of us Westerners, they should watch this and realize how lucky they are.

[@wowinterestingskills]

You are Right

[@iceman7975]

@@wowinterestingskills I totally agree.

[@MegaDargar]

Wow yes definitely. Watch this to learn how they fucked everything about this overhaul up.

[@pascalsurlaroute]

Then realize (maybe) that they are not that lucky to be fat and pampered after all and that the lucky guy is actually that kid learning to use his hands and mind for something else than tickling a "smart" phone 24/24.

[@andrewbowers_]

Your great grandparents did it this tough - it’s the cycle of life. So, one day, that kid’s great grand children will be fat entitled brats like todays Western kids.

[@gregparrott]

10:37 I have never seen a cylindrical roller bearing where the individual rollers were free to access. They are normally housed within a cage assembly Just goes to show, a sledge hammer is a mechanic's best friend.

[@tomb816]

It's usually where the shaft has a hardened surface and also allows the use of a larger shaft diameter, due to the lack of an inner race (liner). You can see @ 1:55, when they remove the shaft and the bearing separates. (I used to work at a company designing bearings)

[@gregparrott]

@@tomb816 Thanks for the reply. I've never seen that before, and I used to have catalogs from Timken, NSK, SKF, etc.

[@tomb816]

@@gregparrott 👍

[@rogertycholiz2218]

@@tomb816 ~ I have always thought bearings [ball,roller,needle] had to be in a race (liner) to separate them for proper lubrication.

[@tomb816]

@@rogertycholiz2218 Drawn cup and solid needle roller bearings typically use the shaft as the raceway, so they lack an inner ring. Also, Needle roller thrust bearings are usually just a cage, like a flat washer. they don't have an inner or outer liner.

[@charlesgraham9954]

blows me away everything is done in the dirt. engines, transmissions, things that should be clean. crazy. lol

[@georgeescaped6035]

see that, a kid is just as good as any man, BRING BACK CHILD LABOR !!!!!

[@freddaniali]

I love how they set the pinion depth by just guessing! LOL, this rebuild is hilarious!

[@envitech02]

That's called experience. Sometimes as a 27 years experienced engineer I also do this. I throw out the manuals and rewrite them.

[@freddaniali]

@@envitech02 Well, my statement above was kind of BS.. Since the ring and pinion have not changed, the shim depth is relatively unchanged and can be reused. You only reset the shim depth when either of those items has been replaced. But you are right, experienced mechanics could just listen to the mesh and check the back play by feel and know it's correct.

[@isaurodominguez6055]

Don't watch it then bro what I see is a bunch of hard-working people doing whatever they got to do to get it done I've been there go back to your books and college degrees in your air conditioner employer because without the proper party you probably couldn't fix a damn thing

[@wybuchowyukomendant]

@@isaurodominguez6055 kek, don't forget that people with a "books and college degrees, in air conditioned room" are designing all this stuff. Just because you can't repair anything, doesn't mean others can't, sister.

[@stevenhorne5089]

@@envitech02 How much "experience" does it take to not roll the bearings in the dirt before you install them?

[@ionzaharia5078]

Excelent work !

[@naughtyangel8134]

Nice work 👍👏

[@manuelsalinas1327]

The best part of the video is Messi t- shirt at 2:27 minutes,Argentina campion

[@jamessmith7691]

You young men seem to have a lot of experience and not afraid to work hard.

Video chia sẻ rất chi tiết và chuyên nghiệp. I come from Viet Nam.

[@user-un2ni8dl7y]

Good work 👍

[@renipeixoto]

Great job! I regret the lack of individual safety equipment and the work of children.

[@92804dv]

6:12 - guy splashed the kid right in the eye with the solvent!!

[@briangc1972]

Only western culture pampers and spoils it's children to the detriment of society. The young boys helping, have learned a trade and are more responsible and have better work ethic than 80% or more of our society. I'll wager their teen suicide rate is virtually nonexistent. Their doctors aren't prescribing anti depressants and none of those workers have even heard of ADHD or any of the other acronyms passed around in the west.

[@ecannon649]

That's one way to do it. May have been the wrong way but they got er done, I can respect that.

[@donpardo1]

Great insight how mechanical repairs take place in some places with the most basic tools and labour . If the most common tool used is a hammer , everything starts to look like a nail …..😅. Well done anyways!!

[@SyedAli-ek4ix]

88

[@binary841010100]

the people that design this system to work.... amazing...

[@TinganHamada86]

Bagus video 👍

[@willyct207]

These guys know their job and do it very fast!!!!!

[@comesefosseantani231]

Can't you see they make the children work? They are stuck in the Middle Ages and work without security and in the dirt!

[@albertooliveiraOliveira]

good job ! Brasil

[@Anuskasv0]

I have no clue what they fixed but this was interesting thing to watch anyway.

[@oldrustycars]

"Now go clean the gear lube out of that pan, we need it to cook lunch."

[@alainbellemare2168]

Cleanest transmission in the country

[@sivadaspallippurath1081]

Excellent💯👍👏

[@user-mw9eh2yc9u]

Разирай,посмотрим.Собирай,сойдёт

[@dtiydr]

I love the pristine cleanliness they had and that they torqued the big bolts so it wont be destroyed after some month again... or how was it now..

[@fannyp7958]

Ребята вам всем, большое уважение .Удачи вам .

[@ryanabitter]

I can smell the dinosaurs from here

[@MarkusM-zv9ik]

Great job, yes, but the boy is very young for this hard work!

[@Bkoinc]

You guys are cool.

[@Larsanator]

Incredible!

[@georgeescaped6035]

hey they have the new invisible solvent gloves!! got to get me some!!

[@pauljanssen7594]

What's funny is I seen these guys recycle the gear lube.

[@notyermonkey2134]

2 "FOOT" POUNDS OF TORQUE.... JOB DONE. "we just don't know how lucky we are..."

[@philippestrickler3461]

. Ils parviennent à réviser et réparer un différentiel de camion avec des moyens proches de zéro. Ils arrivent à régler le jeu dans un montage avec des roulements à rouleaux coniques. Normalement, il faut des machines de précision et des pièces neuves. C'est un miracle.

[@timgruver5932]

Always amazed they just throw everything in the dirt. Fricking insane! And throwing those bearing journals etc and possibly nicking or gouging them,really? Bearings in the dirt?

[@tomb816]

It's ok, they rinsed them off in water (might be kerosene, but I'm calling it water). 😆

[@llamamanism]

It’s a different world over there

[@woopyass]

@@tomb816 Yeah, totally water. Which they totally didn't later burn as a part heating fuel.

[@wuffa4503]

@@woopyass nonsense,,i can tell you have never cleaned parts to inspect or for fresh lube to reassemble,,look at the color as he pours it and look at the bubble on the surface and the oily film running of the parts,,,,it is parts cleaner or kerosene

[@paulmlemay]

@@woopyass actually they probably cook with the used kerosene, in a pressure stove

[@flyer55jrt]

Never realized Simon and Theodore were working in a shop in Pakistan.

[@mekaniktruk]

Good brow 👍😊

[@mamaicupjayachanel2512]

wow..mantap..sangat luar biasa..❤👍👍👍👉🙏🙏🙏..

[@someguy325es]

“What do you torque the pinion nut too?” “One Mahmud”.

[@johnrose7491]

Love the preload on the pinion but overall a brilliant job

[@giovannifinievoli8825]

good job!

[@kevindunlap5525]

Do they pour the sand in before the differential fluid, or after?

[@shahidaifat4390]

Salam dari bengkel Indonesian

[@maxsdad538]

I don't know what they're cleaning those parts with, but it reminds me of when I overhauled a Holley back in 1975 with that canned carb dip... and no gloves. It took EVERY DROP of natural oils out of my hands, and they turned white and cracked and bled and hurt like a BITCH for about two weeks. It was a hard learned lesson for sure.

[@obsoleteprofessor2034]

You must have had the good stuff before they changed the formula. The new stuff was no better than chicken stock. Berryman Chem Dip!

[@artmchugh5644]

Worked at a carb tune up shop in 73 , rebuilt LOTS of carbs , would dip the metal parts in a 5 gallon pail of cleaner!! Nasty stuff!! Washed everything in a tub of solvent and you are right about your hands !!!!!!🚘🚘🚘🚘🚘😁😁😁😁😁😁🍺🍺🍺🍺

[@trplpwr1038]

Yeah buddy! That was some good stuff, made short work of flesh and bone.

[@patverum9051]

We used hot trichlorethylene on gearbox parts, before it was banned... good if you had a cold.

[@nikosasimakis6676]

imagine what they could do with some power tools!

[@garyforestiere7732]

Don’t know where they get some of those tools but they seem to work well ! Those bent steel bars for sockets as breaker bars work better than the ones they sell here I always break the ends on mine !

[@arminfuchs8088]

Beeindruckend diese neuen Sicherheitsschuhe...🤪 These new safety shoes are impressive

[@fmf-vz4bo]

Y las gafas de seguridad. Y el puente grúa para mover piezas. Y los guantes de seguridad. Y el niño revoloteando. Y el suelo técnico. Un completo. Todo fantástico. Cuando mi hijo trabaje que menos que en estas condiciones.

[@jasimbaloch3442]

مرار بلوچ 🔧🛠🔨

[@976charlie9]

I think these are the same dudes who worked on my 1994 Chrysler lebaron over at the Pep Boys.

[@nigelparker5886]

Love the light blows from a heavy hammer mentality!

[@Sonomaniaque]

Ce que j'adore dans ces videos c'est qu'elles sont commentées par des chipmunks !

[@dpham.2905]

Professionally...

[@tomdirusso1668]

Very impressive

[@autophyte]

Good work, but please will someone send those guys some nitrile gloves?

[@GordiansKnotHere]

I'll have to remember this place the next time I need floor dirt and large grain grit in my gear assemblies... Thanks!

[@stevenhorne5089]

You're not supposed to tell them how bad of job they're doing. They need the customer to come back if they've only ripped them off once.

[@dilkal1756]

Outstanding and very impressive job done for the spider gear by all! Great inspiration !! Thank you! From Montreal, Canada 🙏🙏😊😊