Disk-shaped Bud Vase--Turned four Ways July 1st 2024 with Sam Angelo

The four ways to Turn something project continues this month (July 1st 2024) with a disc-shaped bud vase. This idea belongs to Mike Peace. Watch as I turn my Bud vase with a bit of a twist. My Bud base is turned from Bradford Pear and on either side I add colored and textured inserts. Lots of cool ideas in this video thanks very much for watching and please subscribe and share my videos Sam
See chapter time codes below...... Just click on the time and jump to the desired topic.
Here are links to the other three members of the four ways to turn project-
Please watch us all and subscribe for future videos
Tomislav Tomasic
• Disc Flower Vase With ...
Richard Raffan • Richard Raffan turns a...
Mike Peace • Multi Axis Disc Flower...
Thanks for watching my videos- for more of my videos, watch and subscribe to my new KZbin channel learn2turnwithsam
Are you Looking at the American Beauty wood lathe? I have one in the "Stock Lathe" program, READY TO SHIP, contact me for details-At [e-mail]
Chapter time codes: click on the time and jump to the topic listed.
00:00 Introduction
00:19 The project explained
01:27 Milling at the band saw
02:53 Work at the drill press
09:22 Establish a recess for the insert
10:31 Shaping the outside of the bud base
12:21 Hollowing
13:29 Insert the glass tube
16:02 More churning on the insert
20:07 Decorating the insert with Beads
21:55 Texturing
22:25 Coloring the insert
24:07 A flask turned in a similar manner
24:48 Final shaping on the outside
25:58 Sanding and finishing
27:23 Forming a foot
27:48 Conclusion
Please find my work on the following sites www.wyomingwoodturner.com
ETSY www.etsy.com/shop/wyomingwood...
Send me a comment or question via e-mail: @---- [e-mail]
I am now an authorized Robust lathe dealer. Please contact me if you have any questions. Interested in a Robust Lathe-watch my videos below on these fine, American made machines.
The Robust American Beauty Lathe: A Closer Look • The Robust American Be...
For more information on the Robust Sweet 16 wood lathe, watch my video: Sweet 16 lathe tour tinyurl.com/uylxh72
Scout Lathe Tour…Video from Sam Angelo • Robust Scout lathe Tou...

[@rickbuian3338]

Great job, nice to see a fellow Akronite, left Ohio for warmer climate,Las Vegas.

[@alainnoel2198]

Great and challenging project for July. Really got inspired by your four proposals. Thanks

[@peltona]

I love your creativity! I'm going to try this for sure.

[@oldgeezer1746]

Very nice idea

[@kenvasko2285]

Fun video. I liked the open concept with no inserts so we could see the tube inside. I guess the inserts made it a canteen and matching the assignment.

[@jflemingsandiego]

SAM!! Threated inserts.

[@MarklTucson]

Very cool project Sam. I like the Roman Canteen approach you took to turning this piece; this inserts are really neat. Very appropriate to be using Bradford pear given that is one of Mike Peace's go-to wood species. I've seen your's and Mike's videos thus far, now off to see what the other two have done with this project.

[@carolriley8472]

This is such an awesome project...I love what you did with it!

[@WYOMINGWOODTURNER]

@@carolriley8472 thanks Sam

[@jeanlong4285]

Very nice, it's amazing how many different ways to make the same thing.

[@WYOMINGWOODTURNER]

Thank you very much!

[@laceyhansen1815]

I found your canteen video. I will finish what I have started - may or may not turn out. I need to get a chunkier piece of wood and will try your method. It makes more sense to me. Thank you again for sharing

[@johnnyb95678]

Always enjoy watching you 4 take on a challenge and see the different ways you handle it. Thank you so much.

[@lorriebuxton2041]

I very much appreciate your videos gives me lots of ideas hope you continue with your great videos thankyou

[@mootnmike]

Thanks Sam for your beautiful work. I really enjoyed it.

[@gbjones54]

So fun to see everyone’s different approaches on this one!

[@jorisdemoel3821]

Beautiful weedpot there. Love the coloured, textured insets. Thanks for another interesting and (very) entertaining video.

[@DancingFox6]

It’s amazing how different the 4 way projects turn out. You are all so creative and talented 😊

[@bradbyers6865]

Good technique to make the most use of the wood that becomes the inserts. Nice.

[@glencrandall7051]

Your bud vase / weed pot is great Sam. I really like the design. The inserts really set the faces off. Nice touch having different designs on each face. Gives the option of changing the look from time to time. Another thought hit me when you first inserted the glass vial. Going without the inserts could be a whole different idea. Make it a see through vase. Thank you for sharing. Have a great day and stay safe.🙂🙂

[@angelramos-2005]

Nice piece,Sam.I always liked your finishes.Thank you.

[@cudamank]

Nice project. Like the insert idea and how they cam out.

[@MikePeaceWoodturning]

Nice vase, Sam. I like the insert idea. Definitely 4 different ways this month on this fun project.

[@WYOMINGWOODTURNER]

Thanks, Mike These are always fun to do

[@tomislavtomasicwoodturning]

Great idea for inserts Sam,great job

[@laceyhansen1815]

I have been trying to turn a canteen, but the foot and mouth piece get it my way, so I decided I would rather use the band saw to cut out the circle. That was how I left it this evening. I was delighted to find your video as it makes more sense to make the canteen using your method for the bud vase. I will add a mouth piece and foot when I finish turning the body. Thank you so much for sharing. Cheers

[@WYOMINGWOODTURNER]

I do have a video making a canteen. They will have a lot more detail on this process. Let me know if you have trouble finding it. Sam

[@alanmullock381]

Another one hits my to do list🤣👍👍👍👍👍👍👍👍👍👍👍👍👍👍😎😎😎😎😎😎😎

[@OregonOldTimerWOODTURNING]

You win this one, Sam.

[@timponder7487]

Nice work Sam I'll be trying this soon. Thank you for sharing

[@LewisKauffman]

Thanks, Sam!

[@johnkriplean1148]

Nice job. Love the texturing. What was the size of ?

[@MrErViLi]

Great idea! Think I'll give it a go. Where did you get that short glass tube with the flange on it? I'm having difficulty finding one like it.

[@WYOMINGWOODTURNER]

This particular tube I had for some years. I used to put finished pens inside when I would mail them off. If you do a search on test tubes, you might have better luck finding one. Sam

[@johnschouten197]

What was the point of hollowing it in the first place ?