Turning a Platter for Christmas 2019 with Sam Angelo

[@marcellongpre4381]

Very nice Always a pleasure watching your video

[@glennnord2605]

Thats a very nice platter , I also like the color

[@WYOMINGWOODTURNER]

Thanks Glenn

[@thomasgallagher5301]

Merry Christmas to you and your family

[@marshallgorrow5543]

Merry Christmas to you and your family. Enjoy.

[@kimseyjustkimsey5256]

Nice job enjoyed your video!

[@DiemenDesign]

0:59 where you talk about check the screw depth, have you had a look at Spike Plates? I'm considering getting, or even making my own, and was wondering your thoughts on them.

[@WYOMINGWOODTURNER]

Perhaps, but here I would still use a faceplates.I do have a smaller spike plate but it is too small for this. But I like them. Sam

[@karenm7449]

Merry Christmas :)

[@williamhoward8319]

you moved from oregon cant blame you

[@glencrandall7051]

Merry Christmas Sam. Best wishes to you and Cheryle for 2020. The platter is very nice. I know it will be well received. It sure is nice to have friends that are willing to help.

[@uniqko]

Thank you for sharing your inspiration....🙏

[@bryanmccabe3632]

as a newbe I like your detail to all the steps you take,thanks bm

[@allanwagner4676]

Awesome video you are a true master in wood turning happy new year.

[@MikeB0001]

Very nice Sam! Merry Christmas! 👍🏻👍🏻

[@mountainviewturning5319]

Platter looks great

[@markchoitz443]

good looking platter and a very nice Christmas gift - Merry Christmas to you Sam and a Wonderful 2020!

[@billy19461]

Merry Christmas Sam and thanks for all of the lessons. You and Mike Peace are my go to.

[@gayle3860]

Merry Christmas!!

[@stephencorkery5351]

Thanks Sam , all the best

[@suzetteedwards7956]

Merry Christmas Sam

[@joeegan8655]

A Very Happy Christmas to you and your family from Ireland.

[@charlesreicks648]

I like what you turned it really looks good. Thanks

[@garymathis8978]

Beautiful platter Sam. As you showed in the video, I love the color change in the wood from sanded to a little finish applied. The wood pops and reveals itself. Absolutely awesome. Merry Christmas

[@WYOMINGWOODTURNER]

Thanks Gary....Drop by for some turning. Sam

[@garymathis8978]

Thanks Sam

[@WYOMINGWOODTURNER]

Merry Christmas. To all of you sam

[@harrykeel8557]

MERRY CHRISTMAS!

[@wagWAGart]

merry Christmas to you and family

[@kplante7881]

Thanks for sharing...!

[@davidmorgan7522]

That's a beautiful wood Sam. The bowl turned out fantastic! Happy New Year to you two! Take care, Dave

[@WYOMINGWOODTURNER]

Any word on when you’re getting your new hip, Sam

[@carolriley8472]

Merry Christmas, Sam! Gorgeous platter! I just turned a piece of mahogany with a segmented leopard wood rim.

[@WYOMINGWOODTURNER]

Love to see a photo.... Sam

[@cedaroakfarm8596]

Another great project, have a great New Year!

[@BeaverCreekCreations]

That is a beautiful piece of art. Merry Christmas to your family as well. Stan

[@williamellis8993]

Beautiful platter, Sam. What a wonderful thank you gift. I'm sure they liked it.

[@alanmullock381]

Great video Sam,hope you and Cheryle were able to relax and enjoy the festivities 👍👍👍👍👍👍👍👍👍👍👍

[@wb_finewoodworking]

That’s a great gift Sam. Merry Christmas. 🎄🎁

[@garythomas6866]

Awesome platter Sam. MERRY CHRISTMAS & HAPPY NEW YEAR to you and the family.

[@ianfiddes9871]

Nice one Sam merry Christmas

[@valeriehenschel1590]

Merry Christmas to the two of you! How wonderful to be up and running in your new shop before the end of the year. Sooooo jealous!! (Still slowly rebuilding my work space). Very nice platter, I hope they enjoy it. Here’s to the upcoming year 2020!

[@WYOMINGWOODTURNER]

Thanks, Sam

[@MANJITSINGH-ko2oi]

Wow sam 1 bowl in 1 day and on x mas eve. great

[@игорьпикалов-ф1д]

Не зная языка я все понял, спасибо здорово объяснил.

[@markmooney2207]

Been a while, good to see you again, all the best in the new shop

[@cortlandhunt4721]

Beautiful platter, Merry Christmas Sam to you and your family. 👍🇺🇸

[@glennnord2511]

Beauiful platter I am looking for some Idea for a olatter and i like your platter .

[@Theboldwoodsman]

All the best Sam, thanks for everything this year, your up inspire me.

[@donaldtrabeaux1305]

Absolutely stunning. Merry Christmas 🎄🎁 and happy New Years

[@cobberpete1]

Ditto comments below. Hope you had a great Christmas, and New Year to come. Thanks for all the tips and tuition in the past year.

[@Etiennemorinwoodturning]

I really like the texture of this piece!

[@georgeoliver9125]

Merry Christmas Sam, nice work....George

[@WYOMINGWOODTURNER]

Thanks George and thanks for the Christmas letter. Sam

[@IlliniFireGamer]

Beautiful as always Sam. I have some mahogany that is for a wig stand for the club. It has been kicking my rear.

[@williamhoward8319]

that sounds like the captians bottom feeder he used at one time

[@adrianbarber7490]

Marry xmas sam from new Zealand

[@WYOMINGWOODTURNER]

Summer down there huh? Wintry winds are blowing here. Sam

[@Lostfriar1]

Merry Christmas, Sam. Question; does the band saw table extension help cutting platter and bowl blanks? Do you use any sort of circle cutting jig?

[@WYOMINGWOODTURNER]

I would use a circle jig on some items but not on this. Cutting this blank perfect is not critical. The table is great for cutting everything on the bandsaw but especially large heavy blocks of wood or logs. Sam

[@garywhited7582]

how did you do the swirl design on bottom

[@WYOMINGWOODTURNER]

I did that with a RobertSorby texturing tool. If you search my channel you will find some videos on coloring and texturing. Sam

[@williamhoward8319]

i remember when you got your one way has it done all they say it will wish i could afford i could have bought one am disabled vet do not make lots of cash

[@diydarkmatter]

merry christmas brother from my family to yours

[@WoodFrontier]

The platter looks great. -Todd

[@mpart_woodlathe-stuff]

Great looking platter Sam. Especially like the finish. Merry Christmas and Happy New Years to you and yours 🌲🎅 -Mike

[@wdnick]

Hi Sam, Where did you get that cap on your bottle of Dr's Woodshop wax? Mine has the original flip type cap that is prone to clogging and a pain to work with.

[@WYOMINGWOODTURNER]

I am sure it came with it. Sam

[@dddriller1]

what is that sanding solution you used like to get some

[@WYOMINGWOODTURNER]

You can wet sand with lots of stuff including the actual finish you are using. Here I am using Doctor's woodshop oil. Sam

[@jimcameron6297]

MERRY CHRISTMAS TO ALL HAVE A NICE DAY DON'T EAT THE YELLOW SNOW IF YOU CAN FIND IT !!!!!!

[@WYOMINGWOODTURNER]

Now you tell me

[@tomcoker9882]

Nice platter. If you want to make another Christmas present I’ll be happy to send you my shipping address, BTW; I won’t mind it being late. Hope you and yours have a very Happy Christmas. Cheers, Tom

[@WYOMINGWOODTURNER]

It's in the mail.....Sam

[@MJ-nb1qn]

I almost lost a hand using a glove on my 3HP horizontal mortiser. I didn’t think it would happen. Famous last words! Just saying. Things get caught sometimes.

[@WYOMINGWOODTURNER]

I understand the danger and I am always very careful wearing gloves. Sam

[@MJ-nb1qn]

WYOMINGWOODTURNER - Yes I thought the same thing, then I almost lost a hand!