XP Deus HF Elliptical Coil settings

[@HistorySeekers]

You are exactly right about tracking. It raises it and cuts into depth in iron.

[@MatthewPfeil]

After all these years, I have finally purchased a new coil for my Deus. I picked up the 9” HF. I enjoyed this one and may even give it a try. Thanks for Sharing Matt!

[@TarheelDiggin]

Awesome! You're going to love this coil. I've also been using Calabash Digger's modified Pitch program with huge success using this coil.

[@MatthewPfeil]

Tarheel Diggin' I’ll have to check that one out. I tried a few that I found today. Didn’t like them too much. I also think I messed up. My headphones didn’t pair and I had to use earbuds at the park today. I think I’m deaf now! I’ve been hunting with the Nox for a year now. I need to relearn the Deus. It’s like a brand new machine again. Lol!

[@HistorySeekers]

Glad you are liking it!

[@TarheelDiggin]

Absolutely love this little coil on my Deus. Certainly not as deep as the 11", but much more stable and great around EMI.

[@stringfrenzy]

Good job with the video. You're exactly right. A little lower sensitivity in the iron can be a helpful thing.

[@TarheelDiggin]

Thanks Josh - it's easy to get focused on "deeper is better", but not always the case. HH!

[@stringfrenzy]

@@TarheelDiggin Exactly! Sometimes it's more of a game of separation! Merry Christmas to you and yours my friend.

[@mowens1972]

Like this video and I would like to try your deus program but may I ask which was the base program you started with. Some of the programs are based on older versions which use different filters, so I want to make sure and to get the base program correct.

[@geovanivela6733]

Hello Tarheel Diggin' I just came a follower of your channel. I just got in to this hobby and own the XP ORX with the 9.5" Elliptical coil but I can not figure out the set up for wet sand, it keeps beeping due to iron i guess . Can you advice me what settings should I use, I will appreciate it..

[@SuperJupiter33]

Metal detecting } XP ORX wet sand top tips... kzbin.info/www/bejne/p5K3Y31paLSjnsk you will find every thing you need to know by watching this channel...good luck with your ORX it's a great machine.

[@jbolf6]

That coil does a great job for you Matt. If I ever buy another machine it just might be a XP Deus.

[@TarheelDiggin]

Thanks John - I really like this setup. Plus, the light weight is a huge bonus for us old fellas. LOL!

[@jbolf6]

Light weight is a big factor at this point in my metal detecting career, I know what you mean Matt

[@victorsvarietychannel2459]

Awesome info, thanks

[@TarheelDiggin]

Thanks Vic - I'm no expert, but I believe in sharing information when you have a setup that's working. HH!

[@halfcent1963]

Great Stuff !

[@jdiggsrecords]

Hi tarheel...just a heads up.. iron volume control has no effect when you are using full tones...

[@Thebigmanmetaldetecting]

I've got the 9in Hf coil but I am looking at the elliptical coil on ebay at the moment so I might just be getting that one as well lol

[@TarheelDiggin]

It's a solid little coil, Simon. I'm sure the 9" is stable too, but I really like that elliptical coil. HH!

[@arronbw3373]

Get the new X35 if you're going to run them at 14.4KHZ lol

[@giannispap16]

lowest on elliptical is 13,3khz and if the soil is clean from trush reactivity could go at zero 0.

[@hubsi5263]

3:04 If you using fulltone mode, it doesnt matter what your iron volume setting is...

[@FindingAlabama]

New sub!

[@RussTNails-fw9ds]

Nothing beets the elliptical coil in the iron trash on the deus one,they need to release one for the deus 2 then it will be able to match the d1

[@Omarmehidi73]

Hi men I lost coil serial number how I dou to connect please I need help

[@monstertruckess]

i think you have to open it , or look on your invoice. Or maybe the shop has your invoice with the number

[@Yiokalai]

Hallo my friend.Why in a hf disc, with upper freq limit near 80Khz, you set value 14,4Khz?Wich is the reason then, you use that disc and not one from X35 LF serie?Many hallo from Greece...!!!!Have you any setting for nuggets? (i mean for HF Eliptical disc)

[@arronbw3373]

I've got the higher of the 2 High Frequency coils and I like to run it at 14.4KHZ. WTF!!! I've also got a Ferrari and I have it limited to 30 m.p.h.

[@TarheelDiggin]

Just depends on the soil conditions. I've been using another program recently that runs great at 28.8 too. HH!

[@richmikesell812]

You forgot to say what program your settings are based on. Critical info.

[@TarheelDiggin]

I started with the Deep program and made changes from there.