XRS Overland Xtreme Rack Installation

  Рет қаралды 4,715

Go Rhino

Go Rhino

Күн бұрын

Пікірлер: 15
@featherspreaderinc3146
@featherspreaderinc3146 6 ай бұрын
Took five hours, lots of cussing. But, it's on the truck. The strong post build whiskey helped me get over it.
@TheGreatGodSencha
@TheGreatGodSencha 24 күн бұрын
Just bought the XRS Overland for my Tundra. Ordered it from the dealership; first time, parts came missing (like the entire second box). The second time, the paint was chipped on almost every part. Third time; the parts seem to be slightly misaligned, or bent making install way harder than it should be. The horizontal poles don't fit right into the vertical uprights. And the screw holes are messed up; in part from them not being rheemed out well for the bolt to go through, and or, from the paint being caked on - either way it makes connecting the two with the provided volts way harder then it should be. Also, there doesn't seem to be enough room for the spacers, washers, nuts, etc. In a few areas. So, if you try to put it together, none of it seems to fit correctly unless you remove some washers (vinyl or metal); which would probably void the warranty or cause an issue god forbid you need to file a claim later. The welds on the outer vertical upright support bars are poorly done. And, as I type this, I realize that those may be one of the issues causing the poor fit between the uprights and the connecting tubes. All in all, I'm still trying to get this installed. Positives: I love the idea, the unit has huge potential for helping you keep your work/hunting truck organized, efficient, and functional. Negatives: Major fail on the manufacturing side. It appears like there's little to no quality control on the final. When ordering; double check the welds, hole for bolts, and especially for any bent sections (specifically on the vertical uprights, and the rack mounting fleet rails.
@jaminoes_
@jaminoes_ Жыл бұрын
That part b etween Step 17 and Step 18 (@5:54) , where the built rack attaches to the bed tracks, needs more detail. The screws coming out of the plates will be impossible to align through the holes in the rack rails given that there is no clearance. Only think I can think of is to install the rack rails by themselves to the bed track, and then bring the rest of the rack in to attach. Any insights here?
@marcvidal6770
@marcvidal6770 29 күн бұрын
can you still install your tonneau cover or soft topper with this?
@Adrian-jh5cr
@Adrian-jh5cr 4 ай бұрын
Just ordered this and i can't it together screw holes done line up it's impossible to put together for 1300 you expect this to work correctly. Wish I would've tread the reviews before I bought it. It's going back of I can't get it together by this weekend. Should've known there was going to be an issue when it didn't ship together! Took 3 weeks to come in.
@johnharris560
@johnharris560 Жыл бұрын
Where is the product I’ve ever attempted to assemble. Complete trash.
@Terminator_T-X3
@Terminator_T-X3 8 ай бұрын
Are you able to have a cover for the truck bed with this?
@albertkelly9673
@albertkelly9673 Жыл бұрын
i bought of these racks and have not been happy with it all one of my main bars cut wrong and bolt holes don't line up i also bought the RTT mounts for the rack to put my roof nest falcon on the cross bars on top are not strong enought and tent bounces so i had to come up with altertives for what it cost shouldn't have so many issues i will never buy another go rihno product again good video tho
@GORHINOPRODUCTS
@GORHINOPRODUCTS Жыл бұрын
Hello, thanks for reaching out and sorry to hear about the issues you are having with the rack. Have you already reached out to customercare@gorhino.com? They can also be reached by phone at 888-427-4266
@kentac1911
@kentac1911 Жыл бұрын
You cannot install the 3 side cross bars to the upper and lower tubes as the screw grommets pull right out of the bars with little to no friction holding them in! I am currently waiting for the warranty dept to get back with me, may just get a refund and go with another brand as I am very disappointed.
@GORHINOPRODUCTS
@GORHINOPRODUCTS Жыл бұрын
Hello, thanks for reaching out and sorry to hear about the issues you are having. Have you already reached out to customercare@gorhino.com? They can also be reached by phone at 888-427-4266
@nathanrundio7982
@nathanrundio7982 10 ай бұрын
​@@GORHINOPRODUCTSno they can't. They literally don't answer the phone and you can't leave a voicemail. Absolutely terrible customer service
@Howareya39
@Howareya39 8 ай бұрын
​@nathanrundio7982 , did you ever get this issue resolved? I'm having the same issue and I'm trying to get it figured out before I return it
@MaxOvrlnd
@MaxOvrlnd Жыл бұрын
👍🏻
@TroyL824
@TroyL824 8 ай бұрын
Horrible product. DO NOT PURCHASE!! Mine arrived with no hardware, chipped powder-coat and broken pieces. I’ll never buy a Go-Rhino product again.
Jeep Gladiator XRS Overland Xtreme Rack; Textured Black Review & Install
16:13
ExtremeTerrain Jeep
Рет қаралды 4,4 М.
🕊️Valera🕊️
00:34
DO$HIK
Рет қаралды 17 МЛН
А что бы ты сделал? @LimbLossBoss
00:17
История одного вокалиста
Рет қаралды 12 МЛН
小蚂蚁会选到什么呢!#火影忍者 #佐助 #家庭
00:47
火影忍者一家
Рет қаралды 127 МЛН
ЛУЧШИЙ ФОКУС + секрет! #shorts
00:12
Роман Magic
Рет қаралды 13 МЛН
Ultimate Off-Road Recovery Kit: What's In My Truck EDC?
18:26
Dillon Mangum
Рет қаралды 71 М.
Atlas Roll Bar Install: From Box to Bed in Minutes!
2:46
Black Horse Off Road
Рет қаралды 5 М.
ALL NEW XRS Overland Rack from Go Rhino on 2020 Jeep Gladiator
8:13
Earl Owen Company
Рет қаралды 26 М.
Building a Truck Camper From Scratch - Part 1: The Frame
19:32
ButterBear Builds
Рет қаралды 67 М.
Xtrusion Bed Rack - 6 Month Review + Install
15:39
Baker Overland
Рет қаралды 8 М.
We BOUGHT An Abandoned House | THEN & NOW  ( 1 year ) in 10 minutes of renovations.
10:54
Escape To The Dream, Restoring The Château.
Рет қаралды 3,4 МЛН
How to Easily Install the Undercover Swing Case Tool Boxes
9:04
🕊️Valera🕊️
00:34
DO$HIK
Рет қаралды 17 МЛН