You will REGRET Not Owning This AMAZING TOOL!

[@ToolReviewZone]

Link for the Claw Bar In Description!

[@MichaelMantion]

I don't have any friends to share this with... Sorry.

[@ToolReviewZone]

Me either 😢

[@markm3.16]

Man, I wish I had a friend 😂.

[@jadenephrite]

Regarding 1:00, the cylindrical protuberance on the side of that claw bar is called the "Dimpler", because it is used to form a crater around a nail head that is sitting flush to the surface.

[@dantheman9395]

I was clawing away for the awesomeness of this tool. I was nailed to it and couldn’t pry myself away until the end.

[@ToolReviewZone]

Omg 👊👊👊🤣🤣🤣 Brother man Dan hahaha

[@BLKSG6]

You really leveraged a lot of good jokes out of this tool

[@ToolReviewZone]

@@BLKSG6 🤣🤣👊

[@dantheman9395]

@@BLKSG6 bravo 👏👏👏👏

[@ToolReviewZone]

🤣

[@kaceesavage]

I have this tool, but was unaware of the smack whack shalak sequence. I was just hitting it regular like a bafoon. Thank you.

[@ToolReviewZone]

Hahahahaha 👊 🤣

[@mikedrake5738]

I have this tool, never knew what the extended "hole thing" was for though, until now.

[@ToolReviewZone]

Hope it helped!

[@Iowawalrus]

Haha

[@danielrw19]

I never knew how to use this tool. Thank you for showing us not so inclined people how to use it.

[@ToolReviewZone]

No worries John, I'm just glad it helped out brother 👊

[@lisaferrara8120]

I have had this tool for over two years. It is very useful!!!! Thanks for posting this.

[@ToolReviewZone]

Awe, thanks for the feedback Lisa!!!!!

[@theloneviking9145]

Well, done video! Great humor, you’ve got it nailed. Everybody else is aggravating, but your delivery etc. is right on.

[@ToolReviewZone]

Really appreciate this comment brother

[@mattwallace7058]

Could have used that when I remodeled my 1940s house 10 years ago. Had real 2x4s and 4"spikes. Absolutely destroyed the boards

[@ToolReviewZone]

Lol 🤣👊

[@shawnkitchen691]

I've used one before.... but it didn't have the extended hole part. It was called a Cat's Paw

[@LoveColorado]

Love your reviews. I bought one of these a few months ago and love it. My daughter loves to remove those nasty nails when removing drywall nails stuck to the rafters after stomping the ceiling out. Have a great Turkey Day!

[@ToolReviewZone]

Awesome feedback Marilynn and thank you so much for the support!!!!!!!

[@jrod5113]

I need to get me one of those. I usually don't make mistakes but I need to convince my Wife that I need it. Wish me luck.

[@ToolReviewZone]

🤣🤣👊

[@colegarthwaite5633]

I have this and its awesome. Everything from nails to screws to even pulling out insulation, stronger than a hammer.

[@ToolReviewZone]

Thanks for the feedback Cole!!!

[@2121contreras]

I have the estwing version of that catspaw. It lives permanently in my tool belt it's a must have. I like that Dewalt version not bad .

[@ToolReviewZone]

Thanks for the feedback 21!!!

[@Michael_78]

I use these tools to pull nails when I’m planing and leveling subfloors prior to flooring installations so that I don’t catch my electric planer on a nail and demolish the blade. I’ve found it’s the best tool for that type of job.

[@ToolReviewZone]

Awesome feedback 👍 👌

[@AntonioClaudioMichael]

I have a few of these different brands. A Dewalt and A Cresent and Milwaukee and a Old Stanley good video Clint @ToolReviewZone

[@nexusly6720]

They are well made tools nearly indestructible

[@ToolReviewZone]

Pretty impressive 👏

[@TruthSeekerAi]

i been using this for years love it

[@milaavila866]

Love how you involved women in the “my dudes and dudettes”!!!!!! I started my carpentry class so I have been looking for something that makes it a bit easier!

[@mattwaters6987]

Definitely “Nice like!” Thx Clint!😃

[@ToolReviewZone]

Haha, thanks Matt! 👊

[@eclecticgentleman]

DeWalt has different sizes in black and also in yellow. I have all of them and they're awesome

[@ToolReviewZone]

Thanks for the feedback brother

[@meri8746]

Stocking stuffer! 👍🏼👍🏼

[@AntonioClaudioMichael]

The dimpler is my favorite feature about this Tool it will get you out a ton of Jams @ToolReviewZone

[@carllamb6711]

Great video Clint Real Nass Like. Iv had one these bars some years now mate great bit of kit 👍👍👍👍

[@ToolReviewZone]

Thanks for the feedback and comment Carl!!!! 👊👊👊👊👊

[@carllamb6711]

Anytime Brother love watching your videos 👍👍👍👍

[@ToolReviewZone]

Awesomeness 👊👊👊👊

[@adamjameskramer]

Really enjoying your videos! Keep it up!

[@ToolReviewZone]

Thanks Adam!!!!! 👊👊👊

[@dalesworld1308]

I have the Milwaukee version. When you need it you need it.

[@bryangrim6021]

I like the videos on all the big flashy power tools but I like the videos on the little things too. Have seen this thing in the store but was like ??? 🤔I learned something new. 👍 Thank you!

[@ToolReviewZone]

Haha, thanks for the awesome comment Bryan!!!

[@mukoshh]

Awesome tool. Every framer carries a little cat's paw in their belt... We call this one the apprentice's best friend! 😆

[@davesmith7328]

I bought this years ago flooring pulling squeaky nails in sub floors!!

[@AntonioClaudioMichael]

I have had this Exact dewalt One for 6 months and it has Come in handy clint I like it Real Nasss Like @ToolReviewZone

[@KlockoFett]

Surprisingly, I do have one. But the old one without the round thing on the side. Mine's just a regular one from Estwing marketed towards pulling baseboards.

[@ToolReviewZone]

Awesome 👊

[@KlockoFett]

@@ToolReviewZone 👊

[@danreger8924]

I love mine. I retired my 25 year old cats paw for this one several months ago.

[@ToolReviewZone]

That's awesome Dan, appreciate the feedback brother 👊

[@Fictitious_Character]

I got a couple on the work van. Good tools.

[@ToolReviewZone]

Thanks for the feedback Fictitious!

[@slams7783]

Nice. I've done demolition jobs and being that this is compact it would've come in handy so many times.

[@ToolReviewZone]

Absolutely brother 👊

[@jamallaidley4718]

Really Cool Tip Clint I haven't seen one of those yet with the hole punched 👍🏻

[@ToolReviewZone]

It's definitely a handy little tool and not expensive Jamal 👊

[@ryobiguydiy]

That’s legit!!! I could of used that a million times in the last few months.😫

[@ToolReviewZone]

Definitely a helpful tool Ryobi Guyb👊👊👊

[@reddbeard2030]

Yes! Definitely a Shweet, Shweet tool. I got that one AND the Mil-Walk-I-A with the wide tail for moulding 💯 Smeeshed!

[@reddbeard2030]

P. S. I heard Vince biting your style saying "real nass like" in his last few posts 😪 Play nice fellas 😆

[@ToolReviewZone]

What's up Redd!

[@reddbeard2030]

@@ToolReviewZone missed spelling It was "Real Nass Like"

[@ToolReviewZone]

Hahahaha, I do that crap all the time brother. Looks good to me 🤣🤣🤣👊👊👊

[@VCGConstruction]

FINALLY IT'S BACK?

[@ToolReviewZone]

Say whaaaaaa?

[@brianb5086]

Cool tool. Neat pry bar too.

[@MrStanwyck]

Awesome tool, I’m going to go get it now!!!! Have a Happy Thanksgiving Clint…..

[@ToolReviewZone]

Let me know how you like it Bill and happy Thanksgiving brother!!!

[@mikeanderson8395]

Just bought the Dewalt! 👍

[@pancakeking3550]

My FAVORITE TTT yet...good job "Vance" (haha)

[@ToolReviewZone]

Habahaha Vance rules 🤣👊

[@Lem0nIlja]

I feel today years old when you showed me what the round hollow knob is for. Just took apart a pallet not using it. Next one will be a piece of cake.

[@PowerToolsForBeginners]

Another great review! A+

[@ToolReviewZone]

Thanks brother!!!

[@kentuckybeardsman]

Yeah buddy!! Amazing tool

[@ToolReviewZone]

I love this thing brother 👊👊

[@slewter9041]

It's designed to allow for a plug after you extract the nail

[@Ryderrichie]

Whaaaaa that's real nice like 👍

[@ToolReviewZone]

🤣👊👊

[@angelacruz71]

I have a Hart version from HD a cpl of years ago. Ive also used it to pry open the side latches when my tailgate handle broke. Useful little pry bar. That dewalt looks nice.

[@dontbetonit813]

I have a slide hammer nail puller that is at least 70 years old that will do the job in less than half the time with less damage to the wood.

[@johnnyguzman2131]

Look at it!!!!!! Love it want it!!!!!!!

[@ToolReviewZone]

Hahaha 🤣👊

[@jordanpike9778]

I have the milwaukee version and have found it seems to last a little bit longer, and it having the slimmer and more sharp claws find it easier to use with less damage to the material.

[@paulinedavis8734]

Schmacking, whacking & schlacking ❤

[@desperadodeluxe2292]

I really liked the size of this and its lightweight. Now I'm looking for other uses for the coring tool. Potentially a punch for leather or canvas to set large grommets.

[@jinpark5324]

I like it! 🤩

[@davidr9876]

The 2 slots on the back look like they are for a purpose. What do you use those two slots for?

[@Environmenthrall]

What are those "flutes" below the punch for or are they purely decorative?

[@tonbonthemon]

Flutes? Sounds like aerodynamics

[@Chau083]

idk who needed this vid. These have been around for years. it's literally in every carpenters pouch.

[@ToolReviewZone]

Don't forget to SMEEESH

[@Sacapuntas69]

I'm guessing you needed since you watched it!

[@Chau083]

@@Sacapuntas69 I own several. This exact one has been in my pouch for years. Thanks for coming out though.

[@Gordontownman]

Loved this video, so much…I shamack-it that like button, then I whack-it that like button, then I sha-lack-it that like button. Thanks and Please keep posting content. Happy subscriber here👍🏽

[@ToolReviewZone]

Hahahaha, what an awesome comment, thanks brother 👊👊👊🤣🤣🤣

[@themeat5053]

Man, how clever the Chinese. Decent innovation. Real Nass Like...

[@dallasdynasty0077]

That's real nice like!

[@ToolReviewZone]

👊👊👊

[@eamonnquinn655]

Good man Clint 😉

[@ToolReviewZone]

Hahaha, thanks brother 🤣👊

[@harbin88]

I have this tool, tried it but dont feel it is that great. Its bar length is not long enough so lever force is too small.

[@lynnpitsinger]

I got my first cats paw 20+ years ago. So helpful! Never saw one with that hole though. Pretty cool

[@vinnylenci7311]

my dentist used that on me but first he sterilized it with a propane torch . It was real nice like!

[@ToolReviewZone]

Hahahaha, ouch 🤣👊👊

[@lanedexter6303]

Interesting. I have a slide handle nail puller that’s older than I am (67). But this is smaller.

[@Toolsinaction]

AWESOME!

[@lecturerecordings9293]

AwShome

[@shaneogallagher831]

I don’t have that tool but I have the hammer you’re using 😂

[@jameskennedy673]

👏👏, a leather hole punch also😀, thank you for the great information video, hope y’all have a blessed, safe Thanksgiving Day, try not to over stuff yourself 😀

[@ToolReviewZone]

Thank you so much James and you as well 👊

[@kaisermojica4216]

Very nice tool

[@itzNickyJayBeats]

Me and Clint have the exact same taste in tools lol. I bought the dewalt clamp kits and then he comes out with a video, I buy this thing. Then a vid comes out XD

[@ToolReviewZone]

Haha, great minds think a like Nicky!!! 👊👊👊

[@delliott777]

I gotta have one 😜

[@ToolReviewZone]

What's up brother 👊

[@jasonbabila6006]

I never knew such thing existed but how well would it work on harder wood such as oak? Smeeesh that like button. 👀👉🏽 👍🏽

[@ToolReviewZone]

It would work, but would definitely take a few more blows with the hammer brother.... ohhh.. and thanks for the SMEEESH Jason!!!

[@oldmanfred8676]

Very cool!

[@ToolReviewZone]

Thanks for the comment Fred!!!!

[@tecc8380]

Nice cat's paw! Sooooo, can you glue that wood plug back in? 🤔 Maybe dampen it to expand it back to size?

[@ToolReviewZone]

I doubt it would expand that much, but could definitely plug it 👊

[@tecc8380]

@@ToolReviewZone Well now I have to buy it 😄 Thanks for your time and making us laugh!!

[@charlestaylor3195]

How is it these videos come out just after I'm finished doing it the hard way. Just my luck I guess. Thanks Clint, my nest new tool.

[@whatthehellimbored]

I already have two.

[@dipping_stock9656]

This video is ReaaaLL NicEEE LeHk!

[@ToolReviewZone]

Hahaha, Happy Thanksgiving Brother

[@ianjay4596]

I have the Stanley model and it's superior. The lil hole thing doesn't get used much at my job, I just dig the claw in and bash with my hammer then pry.

[@ToolReviewZone]

Awesomeness 👊

[@robertzeoli6382]

❤❤❤ IT THX !!!

[@ppwipf6935]

@TRZ When is the Ridgid 6ah battery review coming?

[@ToolReviewZone]

I can do something this weekend 👊👊

[@ironwood1621]

That’s reel nass lack!!

[@ToolReviewZone]

Hahahaha 🤣👊

[@eoghanfla6343]

What I like about this tool is I can afford this, can’t afford the framing nailer, they are about €4000 here.

[@ToolReviewZone]

Wow, really!!! 😲

[@rsmith7292]

Smeeshed! invaluable when I had to remove old (awesome) redwood siding to re-frame the wall. Thanks TRZ. I think "Vance" owns one too. Stops splintering.

[@ToolReviewZone]

Hahahaha, thanks for the feedback brother and Vance is da man! 🤣🤣🤣

[@thecappy]

Going to get one today to go pull some old deck boards. Didn’t want to accidentally cut up the good boards next to the shit ones.

[@Gasssan]

that Sha-lacking tool is really Nasss like

[@Apache-Helicopter-Life]

The pull out game is strong with this one…

[@eosjoe565]

That is SHAAA WEEET!

[@ToolReviewZone]

Hahaha 🤣👊

[@stevejebb7896]

Love it

[@swbjackson]

I'm disappointed that Makita don't make one.

[@somethingsneakyhasarrived224]

I use the regular titanium version

[@darinvee4980]

I've had this for 6 months. Do I win a prize?

[@ToolReviewZone]

It's in the mail 😏

[@darinvee4980]

@@ToolReviewZone Thanks, I'll go wait by my mailbox! That earns you a subscribe and like. I do appreciate the way you try to keep that "Vance" guy in check.

[@yzrippin]

No even a carpenter and i know theyve been tac welding tapered nuts onto cats paws for ages.

[@dewaltonlyrestistrash3934]

I agree you’ll regret it good thing is that I own 2 of those and now THATS real nasssssss like

[@ToolReviewZone]

Hahaha, I knew you would Dewalt 🤣 😂 👊👊

[@Aepek]

YEP, “sla-acking-it” 🤣 WHAAAT, that’s so funny! Is great, AND so is this type of tool (cats paw, claw paw, claw bar are other names I’ve heard this tool called)! Would even go and say, MUST have if doing woodworking, AND my OTHER FAV Pry “bar” tools of mine are my Titan 17007 3-Piece Stainless Steel Pry Bar set; very useful for trim removal, excess mud from bottom of walls, around boxes, etc for when mud and texture are done. My last fav optional tool is a J-Tool (J-bar) tool for bee keeping and usually these are painted YELLOW, RED, or BLACK, and I scrape that paint right off, b/c don’t want it flaking off later on on finished work or mixing in w/ other materials doing rough/finish work……not very cooool, imo. Have great Gobble Gobble Gobble Day☺️

[@ToolReviewZone]

Haha, awesome comment and feedback as always Aepek. Have an awesome turkey day brother!!!!

[@darkinertia2]

hes the type of dude that when he sees food, he wiggles his his fingers and says "well dont mind if i do!"

[@daviddavio1032]

Great stuff, oooooooosh.

[@ToolReviewZone]

Thanks David!!!

[@donwilliams3350]

It’s funny after watching your video I don’t regret not having one. Odd

[@ToolReviewZone]

You should

[@meagaindave2049]

Good grief, Clint. to keep from over driving nails, all one has to do is use nails with washers. Sheesh! 😉🤣

[@ToolReviewZone]

🤣👊

[@76Starship]

nice !!!!

[@rpmcaicara]

A little short no?I am frim Brazil and o aliás watch your videos