Your First Day with Tormach's PathPilot

On this video, we cover the very first steps in using the PathPilot control software: the license & setup of the mill, the interface basics, and then the file system/settings tabs.
If you want to find out more about PathPilot you can click on this link: www.tormach.com/pathpilot.html
Interested in a Tormach machine? Schedule a call with one of our team members at hubs.ly/Q029gf-H0 and they will be happy to answer any questions you have.
Be sure to subscribe for updates on everything Tormach: goo.gl/sWeCs7
Join the Tormach Forums here: hubs.ly/Q029ggRV0
There are several ways to contact Tormach Technical Support.
If you want technical support, please follow these instructions to open a support ticket: hubs.ly/Q029ghcD0
Tormach Technical Support page: hubs.ly/Q029ghwW0
Tormach Technical Support contact: tormach.atlassian.net/service...
About Us: At Tormach, we're dedicated to providing exceptionally engineered products, technical support, and customer service at the lowest possible cost. Our focus is to help you realize your CNC goals through tools and resources that transform your concepts into real products. Connect with us:
Visit our website: hubs.ly/Q029gj8M0
Facebook: / tormach
Instagram: / tormach
Twitter: / tormach
LinkedIn: / tormach
0:00 Introduction
0:23 License and Configuration Screen
1:04 Persistent Controls
1:12 Notebook
1:36 Referencing the X, Y, Z Coordinates
2:03 Program Control Group
3:30 Manual Control Group
5:12 MDI Line
5:24 Metric Command - G21
5:43 Imperial Command - G20
6:01 FIND Command
6:17 File Screen
7:19 Settings Screen
7:37 Active G-Codes

[@prodesign8189]

Just a reminder...Z is best to reference first. Might avoid a crash of things...Love the vids...especially the latest feed speed rpm calc quick tip!

[@tormachinc]

Yes, you are correct! For the PCNC's and Slant-PRO you should always reference the Z first. The only exception is the RapidTurn, where the Z is actually X. For that, you would need to reference the X first. Thanks for your own Quick Tip!

[@andyvan5692]

Finally, found this cnc interface, 101 video, nice to have a 'basic' video, and have enjoyed watching them all.

[@chenegabfree7617]

Nice job...! Will make use of this video with my students.

[@tormachinc]

That's what we like to hear! Hope this helps them on their way to learning CNC! Can you let us know where you teach at, and what your students are interested in?

[@bluehornet6752]

That's an awesome UI! Did you do it with the Qt Framework and QML controls? Looks outstanding...can't wait to try it out.

[@masteristscalerailroadmodels]

Just a general question: In few years I am considering buying a CNC machine for my model train business. Though many things can change by then I have few general requirements that influence my choice. I am new to CNC machining and I expect a big learning curve to overcome yet consideration whether or not to commit will come down to next big question: Since model train parts I plan to make are for tiny scale trains (1:100 scale), the wheel will rarely exceed 8mm or 1/3" diameter. Because machines by Tormach the ones I saw are large ones I am wondering about capability to machine small parts as some chucks (maybe just because I used cheap tools in past) have limitation of 1mm being minimum stock they can hold. Thank you.

[@tormachinc]

You may want to look into the work of Wes Bye. Wes uses a PCNC 440 for all his CNC work. We have a video of him at our open house from several years back (sorry the audio system stopped working so the audio is bad). kzbin.info/www/bejne/lYipeKFufa2gi5I

[@guildtitan]

Can the machine be set up to run metric all the time?

[@tormachinc]

You can change your PathPilot Control System to operate in metric by typing G21 in the MDI line. The system will stay in metric upon restart, but initially the display will show G20 (Imperial). Once you press reset, the system will display G21 again. Thanks for watching!

[@SomethingFishy707]

our pathpilot has the incorrect time and date how do we correct it?

[@tormachinc]

Hello AGTExotics, you can adjust the date and time by typing ADMIN TIME into the MDI line and pressing enter or by right clicking on the clock.

[@6486708]

Can I install tris Path Pilot in my Tormach 1100 serie 2 ??? Jose can I do it ???

[@tormachinc]

Yes you can! PathPilot is compatible with all Tormach CNC machines. We are now also featuring a PathPilot simulator called PathPilot HUB, that you can use to test g-code when you aren't at your PCNC 1100. www.tormach.com/pathpilot/