The Problem with Fish Tank Cases

[@RRRBBCC]

8 inches is HUMONGOUS

[@CharredSG]

Frr

[@Goldmanknight]

Bro that makes me feel bad for my 2 inch

[@TheOGslime]

​@@Goldmanknight dw ya only need 2 inches to reach the prostate

[@TheOGslime]

​@@Goldmanknight dw ya only need 2 inches to reach the prostate

[@panaganag]

That's what she said

[@swivels]

I have literally never heard a single person complain about having *too much* space to work with in a case...

[@diego_roca]

I guess it’s just that more space in a case later means less space in the desk

[@josephomoyajowo8509]

I don’t think they were complaining about the space in the case but the space it takes up on the desk

[@MyronOrenji]

Half the time is filled with random shit, keep it clean and minimalistic its looks more sophisticated that way ​@diego_roca

[@seagullman87]

Trust me, you'll start complaining if you have a limited amount of desk space or live in an apartment. It's the reason why I went with the Fractal Pop Air (same the orange-and-black one shown in this short), as it was able to easily fit on-top of a small table I already had.

[@simple-sheeps]

That’s where I am at. I’d prefer too much space. My PC sits under the desk anyway. Nothing else goes under there. The bigger the better. More ventilation too

[@UltraVegito-1995]

Build a PC from fish tanks ❌ Build a PC from a fish carcass ✔️

[@ItsNeverMe]

Build a PC from fish tanks ❌️ Build a PC from fish MRAPs ✔️

[@AMDisTopDawg]

Build a PC from fish tanks ❎ Build a PC from fish Super Cobra Attack Helicopter ✅

[@lambo_centernario9064]

build a pc from fish tanks ❌. build a pc from F-111 VAAAAARK ✅

[@Four_Wcue]

Build a PC from fish tanks ❌ Build a pc from SU-27 ✅

[@Sana-Tozaki-TWICE-KPop-1998]

Build PC from fish tanks ❌ Build PC from ICBM ✔️

[@dragonborn.k]

Not having the PSU on the bottom means you can have three 120mm fans blowing straight into your graphics card.

[@S3Bayaya]

Dual chamber is a godsend for me, it save me from the woe of cable management. I have fat finger so the extra space make it easier to navigate.

[@POLARTTYRTM]

and no need for cable extension to reach the CPU socket.

[@GraaviticusIII]

Same here. I started with a Corsair mid-tower case and could barely fit all the cables for everything in the back. I had to upgrade when I bought a bigger GPU bc it wouldn't fit in my case, so I bought a Lian Li 011 dynamic and it's been fantastic. Plenty of room and looks cool.

[@InfiniteDragonsUnlocked]

​@@POLARTTYRTMI like cable extension anyway

[@POLARTTYRTM]

@@InfiniteDragonsUnlocked those of us living in poor countries do not, they are super expensive.

[@drmad725]

One great reason I'm considering one for sons build. His current system is in a Thermaltake micro-ATX but the cable management took longer to do than downloading Windows 10.

[@83n80y]

I've built one for a client. The back chamber was really nice to install everything smoothly. Cable management is really easy as well. As for the desk space, just put it on a platform, with wheels, underneath the desk. That way you can wheel it out when you want to show it off. Don't need to stare at it 24/7. That'd be too distracting.

[@morzemus1805]

>showing off your PC

[@HashMyth]

You're not wrong. Most of the joy is finally firing up that beautiful build... Only to care less and less of the look and only about the performance and showing it off from time to time 😂

[@gega24-h3r]

"8 inches is still above average"💀

[@Cosmic_Radiation68]

Me who thought 6" was average ( I was happy) until I see Zach flexin' 8" 💀

[@JahonCross]

Thank goodness

[@gega24-h3r]

@@JahonCross did you know what I meant???

[@morkalan5226]

​@@gega24-h3r what did you mean then ..?

[@gega24-h3r]

@@morkalan5226 men's avarage he said💀 "don't worry 8 inches is still avarage" 💀

[@NickSklias]

I just unwittingly bought a dual chamber and was forced to make space. Me and my best friend decided we'd get essentially the same rigs. He had already done the research for our builds and I just modified a few minor components before purchasing... when the case arrived I was SHOCKED. I wasnt expecting an Atx case to be so much larger than my 12 year old E-atx cooler master case. It was then that I realized why we bought 10 fans for it 😅. I loved having the internal space while making the build, but I had to put a wire shelf over my air conditioning unit so it would even fit in my room. The ac can blow cold air right into the bottom of the computer so now it's got even more cooling potential. WIN-WIN!

[@axelroberge577]

My opinion is completely different. I love dual chamber cases for the room for the cable and because i prefer deep case to high ones. And i'm not especially in love with fish tank cases.

[@tylercrandall55]

I love the dual chamber design because fhey looks so clean

[@Digitalknifeparty]

I went from a Fractal Meshify 2 to a Lian Li 011 Dynamic Evo recently. The 011 was an absolutely joy to build with.

[@alexalonso2093]

Just look at one beautiful case yup $229 Thought. buy once cry once. in white of course

[@Reason4234]

I love not having the heat from the power supply directly under my gpu, and having more than 1cm for cable management is amazing. I'm not one for looks, so the fishtank is irrelevant, I appreciate the extra room.

[@Kujashin]

ikr, i have enough corsair icue crap in my pc to need 2 commander pros. aint no way its fitting in a normal form factor case. not to mention the 3, 360mm radiators i somehow managed to fit in there

[@StevoHDA]

the psu sucks in air from the bottom and exerts outwards what are you smoking. There are also plenty of cases with plenty room on the back without being dual chamber, you can't hide behind a group of incompetent people to male yourself look normal, you're still incompetent. cases like the ceres 300 even allow you to access the shroud on both sides, no excuses.

[@TheCth777]

Yeah, why did top mounted PSUs go away? I just moved my pc into a fractal torrent with the top mounted psu and it seems much more convenient

[@ilsolitopaolo]

​@@Kujashin wtf is the 3rd radiator doing there

[@Kujashin]

@@ilsolitopaolo idk, you tell me what radiators do in a liquid cooled PC

[@twilekcustodian]

Having a row of fans directly under the GPU just makes a lot of sense. Having a solid panel right under the GPU just chokes it of air

[@Oozaru85]

Thats why the basements in regular cases have ventilation holes in them, so you can mount fans on there and provide air for the GPU.

[@What_In_This_World]

@@Oozaru85 and in most basement compartments, those holes are partially blocked by a PSU and PSU cables…what would be sweet, is if a case manufacturer that also happens to be a PSU manufacturer, came out with a dual chamber case that came with a preinstalled, modular, 1000watt Flex ATX PSU, granted it would have to be xtra long and a custom design, but you could make a dual chamber case that’s capable of handling a Noctua. NH-D15, that’s under 10inches wide. The PSU would be shaped like a power strip however, but with proper placement of the modular connectors, CPU towards the top, followed by 24-pin, followed by your PCI-e and finally Sata connections, you could fancy yourself the best of both worlds…but someone would have to be brave and willing to take a chance…

[@CloudyMcCloud00]

Most GPUs have a row of fans built in. Might cancel 'em out. 🤔

[@marcusaurelius4777]

@@CloudyMcCloud00 I was thinking if you like, vertically mounted the GPU, it might blow the hot air toward the tempered glass side, while the bottom and front blow in cold air, and push it all out the back and top with the AIO radiator on the top. Might solve the issue.

[@CloudyMcCloud00]

@@marcusaurelius4777 Yep. It does seem to me that vertically mounting the GPU is mostly for looks; and you get better thermal solutions mounting horizonally.

[@friendlymarble]

I love Fractal Design, especially the Pop Air and Pop Mini Air! Nice to see it get a shoutout.

[@lansiman]

it is exactly because the psu is not at the bottom makes the cable management extremely easy to handle

[@jacques8823]

Just built my first pc this week and this just didn’t make sense to me! Its 2024 and we still have to run the cables through 3 90° turns and a tight plug in to the PSU. Is it stubborn tradition, or do ppl just hate efficient pc designs?

[@Banditdakat]

i have an antec c5, very clean for a dual chamber, very nice, exquisite even

[@UnboxerofWorlds]

I had no idea there were non-dual chamber fish tank cases. Thank you for giving me more options!

[@linkagex500]

Love the fishtank ones, rather have that tbh, and having the fans under the gpu is great, honestly I feel its a better use of the airflow with the design than standard cases.

[@ariavachier-lagravech.6910]

"8 inches is above average" Thanks Zach, I am always afraid it's too smol

[@sabawoonsenakai1244]

Nah I’m happy with my almost 10” honestly 🥱

[@WitheredBonnieOfficial2]

what's too small?

[@dozilla77]

Love my O11 Dynamic white build fishy tank with 140mm’s , the most fun I had building a PC in the 25 years I’ve been tinkering. Awesome thermals too to boot. I don’t think I ever want to go back lol

[@rutoojinn]

I love them. So much room for cable management.

[@StevoHDA]

because you're incompetent to do a little research for a case with a normal psu shroud with more than adequate room at the back for cables?

[@Xbox-ug1rl]

@@StevoHDA🤓

[@its_not_the_Ishu]

​@@StevoHDA this dual chamber cases generally support back side mounting motherboards like MSI project zero series... cause I have one corsair 2500D dual chamber case which support backside mounting means zero cable is visible on the front exacept for GPU ofcourse ....I have 7600x paired with 7700xt on B650 project zero

[@reavinoid]

​@@StevoHDAhaving a preference = incompetent?

[@rutoojinn]

@@StevoHDA Meh preference. Don't get your panties in a bunch...

[@yourordinaryduck929]

I love the second chamber actually, it's more room for cable management and i like how it's cube shaped.

[@FactionsBirb]

*8 inches is still above average 8 is above average?😢😢

[@lorenzzz8630]

😢

[@valltrax4076]

i mean its only 1_2.5 inches more than the average

[@Justanuggy]

​@@valltrax4076NOOOOOO

[@michaelhenar]

​@@valltrax4076 u meant 12.5 right 😮

[@valltrax4076]

@@michaelhenar so the average is -4.5 💀

[@tehcowgoesquack]

I personally still love the Hyte Y60, it’s just a clean case and was really fun to build in

[@emmettTheBoi]

H6 flow is just great case all over

[@JoJo-ze3fx]

On the desk? That shit's under my desk

[@scarlightprince]

Indeed. I got 'er on two wooden shelves since it's carpet floor, and even then there is good space for everything.

[@windowswhistler5516]

I've got an o11 mini, I keep it on a separate shelving unit (mostly because of my unstable shitty desk), it doesn't take up much space, even when I had it on the desk, and still keeps all of the dual-chamber and fishtank advantages. Underrated case in my opinion, the other o11s get all the credit.

[@MorganBlem]

I use the same case. When he spoke about a huge side chamber I looked over at mine and just thought "disagree". The chamber faces away from you anyways, and it is just incomparably better to work in. I will never go back to mid tower.

[@mrtechie6810]

Love it. But the hard drives in the rear chamber get no cooling so I had to move them! 😢

[@wpdlatm5576]

@@MorganBlem my exact reaction too 😂 the side chamber is honestly so thin and nowhere as exaggerated as that one example he chose to show in the video. besides the airflow is jsut unparalleled.. my rtx 4080 peaks at 52 degrees on sustained full load

[@StevoHDA]

o11 mini can't even mount an AIO on the top, which is more proper than air bubbles at the tubes when you mount in the front

[@MorganBlem]

@@StevoHDA depends if you're using an ATX or mATX. It can top mount with mATX.

[@redman2751]

I agree. I went with a narrow fish tank style. I looked at the dual chambers but the only reason I didn’t go with them when I did my build was the width. They were just too deep. I got the nearly all glass look but my power supply is on the bottom. This works also because there’s a small gap that I put a 7” monitor in and run my performance gauges in there so I always can keep an eye on temps and even FPS which isn’t a big deal to me but it’s nice to see every now and then.

[@acepagz]

"8 inch is still above average" Me:looks down Edit:thx for likes and am not naked and edging 💀💀💀

[@magicwizurd8970]

u naked while watching ztt? 💀

[@iGPR3]

@@magicwizurd8970 gotta get the edge sesh in

[@NRGRizzoYoutube]

@@magicwizurd8970fr 😭

[@YT_MysteriousFN]

@@iGPR3💀

[@drew2626]

@@iGPR3Ayo 😂

[@LandonCuskelly]

I have the H6 Flow and have never thought it was too big.

[@happycamper90596]

love my H6 flow , so easy to build and cable manage

[@ArdaSReal]

yep its awesome

[@Kinsanth_]

The tower 300 from thermaltake is also a solid solution and doesnt even take up that much space on the desktop. You can somehow even manage to build in an atx mainboard but a smaller atx suits it better.

[@999plays]

8 inches is MASSIVEEEEE 💀

[@joekickass8943]

Ready for the 10090 baby

[@Jehiel77]

thank you bro

[@rampxgaming4355]

I love dual chambered designs because my pc is never on my desk to begin with. I want something that is a dream to cable-manage and looks really good.

[@MyRkAcc]

That huge thing needs a table of its own 🤣

[@Vortechtral]

I have a Corsair Air something or other from a good many years ago now, and I personally love them. The room for cable management alone is amazing.

[@radradR0bot]

Fish tank cases are like Victoria secret models. They look great on camera, but weird in person

[@furioustester4056]

Yeah, everything but the h6 flow imo, the angled front really hides the width from every angle

[@RicochetForce]

Good example

[@StevoHDA]

no they're fat onlyfans models, some people like that, but they're still fat

[@kajiaq8985]

Fr I got the o11d evo rgb cuz I loved the pictures of it online, but in person it looks so big and heavy and weird and overwhelming for my desk so I’m thinking of returning it and getting the h6 flow

[@SceneTurkey]

To be fair, hiding stuff in a bottom chamber still counts as being dual-chambered. It's just vertically aligned chambers vs horizontally aligned.

[@tofuguru941]

The beauty of dual chamber cases is that it allows the bottom to be open air flow to pull cool air from under the case in directly to one of the hottest components of the PC... your GPU. That's why they work so well. If you don't like dual chamber, then the next best thing would be a PSU at the TOP of the computer like they used to be, that way it allows bottom intake fans.

[@keizhardy931]

Mine is Lian Li "Snow White" edition and I love it, never get tired of looking at it.

[@Stepher45]

Yea they’re huge, I wish there were more mATX fish tank cases (other than the best case of all time, the MSI MAG PANO M100R PZ)

[@anitawheen]

that case is the 🐐 🔥

[@v3ktxr_GD]

man, MSI really needs to change their naming scheme

[@anitawheen]

@@v3ktxr_GD i know its like they just said a bunch of differnt words like criss cross applesauce zeon with funky mode by msi

[@xs3tsunax]

check out zalman p30

[@Stepher45]

@@xs3tsunax literally the goat if you don’t have a Project Zero motherboard. If you do though “zero” competition (see what I did there? “Zero”? Yea it’s not funny). But the MSI one is basically made for P0.

[@ChrisJS1987]

I like them. I like the reduced height. It fits on my desk under my shelf with enough room for good airflow.

[@thehistorian1421]

Thermals in fish tank cases are also pretty crappy. Especially if you air cool and don’t water cool (custom or AIO). But like the original commenter said, they’re just too big and bulky. I can barely fit my Lian Li Lancool 216 on my desk already lol. Also it’s way too much glass in my opinion. That’s just a disaster begging to happen. These cases are also a scam to get you to buy more fans than you really need. Gamers nexus proved you don’t need 9 fans. Just put them where it’s important.

[@remy4320]

I love my O11 evo great for build and maintenance. I actually started looking at these cases because of the bottom intake. So many "normal" cases dont have any bottem intake fans because of the cable shrouds.

[@Communinja]

Best part of dual chamber is having fans directly under the video card

[@ArdaSReal]

yep airflow onm the h6 is amazing

[@ryancowles5633]

The NV5 & even 7 is gorgeous and well thought out

[@mynamebeethshawn]

Sounds like a problem easily solved by getting a deeper desk 👌🏾

[@StevoHDA]

you mean wider?

[@mynamebeethshawn]

@@StevoHDA nope. Depth would allow you to have your computer further bacc on the desk. It’s not a width problem unless your monitor is too wide which isn’t a dual-chamber pc case flaw.

[@Sintec2349]

“In some cases it is pretty big” unintentionally made a pun

[@blupandax]

The Lian Li 011D Mini is still king. I don't think anyone can convince me into saying a different dual chamber case is better

[@MogCity2]

Yeah they are a sweet case

[@Vismajor01]

I wish it'd 1cm wider to fit AFX PSU, and 1cm taller to fit 360mm or 3x120mm fan on the side. That's all I want.

[@Zain792]

Cult case

[@gordonneverdies]

This looks awesome! I think my least favorite part of building is getting the back panel on after managing a million cables.

[@LoneWolf-jp4bz]

Dual chamber is amazing for people who are new because it allows for mistakes in cable management without have to pull every cable out

[@StevoHDA]

plenty people were new with no complaints over the past 20 years and even further back, they all just that incompetent today

[@LoneWolf-jp4bz]

@@StevoHDA or maybe it just makes it easier and you can stop acting like you’re better than new people joining a hobby. Douche.

[@Elvyne]

​@@StevoHDA What's wrong with making one's life easier?

[@fluttzkrieg4392]

I love this design because it allows me to place my waif- anime figures above the case without obstructing airflow.

[@Iesous27]

better cable management, better air flow, better visuals. Win, win win.

[@Ladioz]

What about that ugly gpu anti sag bracket. I guess you can fix that by not buying such a heavy gpu lol

[@Tbiblaine23]

You can cable manage without a massive side panel lmao

[@carlosm.sierra1465]

You clearly have not dealt with dust right?

[@GENKI_INU]

You either have a raised bulky thick base that you can't really hide with a PSU choked for air, or a side chamber that you have a chance of being able to hide and with better cable management and easier access. It's obvious which one is better.

[@Discuiet]

As soon as I saw a case design that DIDN'T have an enormous hideous power supply basement chonking up its bottom fifth with a solid block of aesthetic poison, I fell in love and never looked back. I can appreciate that not everyone has the horizontal desk space (or good taste) to be a dual chamber chad like myself, of course

[@spiritme420]

I got the Lian Li dynamic evo XL, and I love it. It's a full tower, but you can barely tell, but it's a pretty big case. I'm so glad I went with this case. Its funny, tho, bcuz I thought fishtank cases looked bad, but the temps that it allowes, well, now I love them.

[@OmnipotentSaiyan]

I'm thinking of getting a dual chamber just so I can flex on my new girl when she comes over. I love explaining each part with maximum confidence as it glows with RGB. Spent the last 6 years slowly upgrading my PC.

[@lassebrustad]

the Phanteks NV5, as he mentioned, is an awesome case tho. I built my new PC recently in it, white build, and it's glowing like crazy with it's 8x Lian Li UNI SL120 V2 fans, actually glowing so much, that I don't need other light sources in my living room, but still, I have 4x Philips Hue GU10 RGB to light up when needed

[@RanZZbert]

Inches are such an awesome and accurate measurement. Love it just like pounds. Keep it up merica.

[@MathiasMoller-ey4jp]

I got the ,,NZXT H6 Flow" to Christmas 😅.

[@jakedivine2110]

LAN cool 216 is a beautiful mixture between the 2! Love my case

[@seannesbit2218]

I have the NZXT H6 flow. I love that case. And it's 2" shallower and 2 1/2" shorter than my Lian li Lan Cool II Mesh. And only 2" wider. But is much easier to cable manage, and the 2 140mm on the bottom, and room to still do push pull on the top with a 360mm rad, makes it much easier to keep temp inline. Instead of pulling a little bit of air from the sides of the case, it's pulling direct air right from the 1 1/2" gap from the bottom. Yes it's a fish tank. But I still like it over the older case I had. To each their own! 🙂

[@stephenhood2948]

I just built a PC in the Montech King 95 Pro. It is big, bigger than what I thought it was when i bought it, but it looks amazing, gets great thermals and is very easy to work in. The way my desk is set up the added width isn't a big deal, and again, the all white build looks so good.

[@joshseveck5040]

I just built my first build with that Montech case and I’m so very glad you approve!

[@rhobson]

Dual-chamber cases simply trade height for width. It's a trade-off. If you want to reduce both (or all three) dimensions, you go with mini-cases, but then there's no way to have an aesthetic component show-off behind glass panels. It's always a trade-off...

[@Elabotrait]

That's why you get the elabotrait CON 87 pc case! It is the thinnest ATX pc case on the market, that also can mounted on the wall! And thus gives a innovative design to the almost same looking pc cases which are available

[@3amurbanexplorer]

Absolutely Love The H6 Flow... 1 of the Best Cases So Far...

[@randytrashcan]

The one thing that pisses me off to no end when building a PC is the tight spaces and cable management. Having one compartment to set things in and another to optimize space is a relief.

[@jackvogel9097]

Nah, you gotta make a fish tank case into both a computer and a fish tank at same time.

[@joshh535]

Function over form imo. My case has a glass panel on the side, but the front is a massive grill with 2x 200mm intake fans, then 3x 120mm exhaust on top and 1x 120mm exhaust on back. Still looks good, I really like the 2 giant RGB circles in the front and airflow is awesome.

[@Junkman2008]

Corsair makes a gorgeous 3500 Series fish tank case that is designed for the BTF motherboards. I show two of my last builds inside them on my channel, and I am very pleased with how they look. They are only 9.5 inches wide so you will have to dress your cables down. The reason that they are that wide is to accommodate the BTF architecture.

[@Driver_1227]

Funny I would see this after I upgraded mine and the wife's PC to the NZXT H6 cases. We absolutely love them. I also enjoyed building in them as well.

[@Chwarg]

Just finished a build in a Phanteks XT View. Amazing case for the money and with the bottom compartment it still has the standard form factor.

[@DemonStink]

The Magniumgear Neo Qube 2 is my case of choice. It's a dual chamber case where you can install another PC (itx/slim matx) in the back chamber. Gaming in the front and an office work PC in the back. I had to get a little creative mounting a Flex PSU to power it but it all fits great.

[@eliadbu]

The best design that fits my needs.

[@richardpaul4205]

I grabbed an Okinos aqua-7. It’s single chambered with a basement and has all the ports on the bottom/side of the case. Looks clean af and comes with tons of fans. I love it!

[@dylananhorn1]

I like dual chambers. for my desk, it will fit better when I swap my build sometime soon. My ideal case would be a mesh between the O11D and H6 flow. Take the 011 and give it that angle panel and omg that would be sweet.

[@Gamingwithrayan1]

Imagine if someone uses one of these cases as an actual fish tank

[@mintyoreos3200]

Dual chamber cases are the best thing related to looks and cable management that has happened to custom PC building in a LONG time.

[@corkyn34]

Now that you mentioned it, both my PC builds are in Fractal Pop Air cases. That extra "inch" behind the side panel is plenty of room for decent cable management. The basement has the PSU in the back, and room for 2 external 5.25 bays up front, neatly hidden behind a magnetic panel. Great for guys like me who still want to sport a DVD drive for ripping CDs etc., and my 2nd bay has a hot swap drive bay, so I can pop in a drive and back up my system, then remove it and can it in my desk drawer. You'll want a feature like that if your house ever takes a lightning strike, like mine did, and your PC is toast.

[@yams6756]

Having the H6 flow myself, here's my take: Yes, it is massive width wise, not nearly as tall as my other mid tower but way wider. If you dont have a lot of space for it on your desk it can be frustrating. Some of you might hate to hear, mine sits on the hardwood but doesn't have the fans on the bottom. I have the 3 case fans in the front, one 120mm pulling in from the back and an NZXT kraken liquid cooler which has 3 fans up top pushing the air out. With all of this being said, paired with a 4080 super, i7 14th gen, and 1000w gold plus PSU, I have never seen my GPU, CPU, or liquid go over 40 degrees Celsius. This case does an amazing job at cooling and I think its 100% worth the space. Not to mention how easy the cable management was in the back.

[@gabrieltorres3932]

I used the HYTE Y60 for my first build that I put together a month ago. And i absolutely love it. I do agree, it's a bit wide, but it looks great

[@phuturephunk]

Honestly, I love how Corsair did it with the 3, 4, 5 and 7000 airflow series. Paired with a Corsair shift PSU, they work great and they're not porky.

[@Killadey]

I'm old, so I'm just glad PC cases aren't beige rectangles anymore. 😁

[@MrJBA79]

I have had a Corsair Crystal Box and it is a vision in black. I love it, it's not too big, I've never worked in a more luxurious chassis before and I'll not soon forget that experience. I simply cannot find fault with it.

[@metalliholic]

Just got the H9 flow and all that extra room is amazing!

[@ashole6226]

I just built a PC and used the H6 Flow. It’s a great case with great airflow. I put mine on the floor and it’s sweet.

[@edgypone4011]

Just got NV5 recently and it's roughly the same size as my previous one, 230mm deep I believe. Cable management is great and it looks gorgeous

[@alkatraz9171]

i like the extra space, easy in cable managment, fresh air from the the bottom. the are wide yes but for a reason.

[@Ninja_Bryden]

I love the Hyte Y70. Lots of room on the front, but that just means room for figures to decorate it :)

[@ForsakenSanityGaming]

I've had a Y70 for about two months now, absolutely fantastic and great to work in. Not sure what people need that extra desk space for.

[@jamescatchot10]

Woooo ok I thought there were going to be some kind of performance issues mentioned about dual chamber cases. Glad the only thing brought up is the size, which should be accounted for if the builder is paying attention.

[@TheGildedViking]

I like the H5 flow for the fact it has the bottom PSU area and has the glass front and side

[@matthewrowles6881]

the bigger the better. I LOVE fishtank cases and the extra space. I havent ruled out one day building one in an ACTUAL fishtank

[@lolo27234]

well i just moved my system into a hyte Y60 and idk i love it its way easier to work on and has better air flow and thats what matters most for a case i can make room for how its wider for the upsides

[@Vessekx]

I recently transplanted my rig from a Montech Sky 2 into a Hyte Y70 Touch. There’s nothing wrong with the Sky 2, but it was intended as a temporary case for my rig from the beginning, and cable management in the Y70 was *so* much easier.

[@Pugerino]

That last case he shows looked sick ngl that psu pocket slim lookin

[@37Kilo2]

I loved full tower cases 20+ years ago. So many Antec Performance towers with 6-8 5.25" drive bays. These days, I want a somewhat compact case that i can fit under the desk and rarely look at.

[@SeneschalStudios]

I just did a build in the Montech Sky 2 and it has ZERO room for cable management in the rear. The back was meticulously managed but the motherboard power cable was "too thick" for the back panel. I thought the Fractal Torrent was bad in that regard.

[@RafitoOoO]

I agree. My favorite fish tank case is the Hyte Y40 for that very reason.

[@pseudo9616]

Just ordered my new parts, going for a white h6 build just because I like the fish tank design and the bottom fan option. Definitely going in a different spot than my current pc.