That plastic / nylon tool used to take out the light switch, where did you get that and does it have a name?

The Toyota bZ4X is an efficient and reliable electric SUV that’s perfect for both city driving and long trips. It’s also safe, eco-friendly, and provides good value for anyone making the transition to electric. #ToyotaBZ4X #Efficient #Reliable #Safe #GoodValue #ElectricSUV

Thank you so much the tutorial is fantastic!!!

Just did install based on your video and worked perfectly. Thank you for posting this

Sensei the boost plus cable is too short to connect the positive and negative terminals. Any solution?

Hi great video. So should I get 40 Amp or 50 Amp level 2 charger? For my 2025 Rav 4 plug in

Was it worth the rear camera installation? I have the Solterra Touring. I've used FitcamX products in the past (Volvo), but it would make more sense to tap in to the built in rear camera used for the review mirror, opposed to adding a second camera and wiring. Overall, good video my friend! :)

Would you know the Part No. for the Master Window switches for Right Hand Drive models ? I want the exact thing backlit in White, but for the RHD Model.

My NOCO Genius5 can no longer charge my battery past 12V. It shows slow green, but stays at about 11.7V. I had to use a Harbor Freight unit and was able to charge battery to 12.3V

@evdude you ever needed to change the 12v battery or had any issues? You got your vehicle in canada?

Make sure you watch this Lexus NX hybrid service bulletin on damaging your engine ECU if you connect a short battery jumper pack negative clip to any of the hex bolts to the immediate left of the fuse box where the black ECU unit sits at. You can FRY your ECU board if you connect to any of the 7 bolts in that area. He recommends a higher bolt in the far upper right area just under the hood hinge area. Watch the video at the 7:00 min mark and then he shows you at 7:30 min mark where he connects the black clip to if you can’t reach the far left side clamp… kzbin.info/www/bejne/r2WsXqZ_gbmWa8U

Very important info about placing negative for the booster. Never ever put it on any metal bits going from the box on the left hand side of the fuses. It’s ECU cover and if you put it anywhere which is linked to it (there are few places which feel good but they link to this cover ) you can fry your ECU! This is quite serious money to replace. I use bolts on the right hand side of the fuses which link to body/suspension. Safest place is to follow manual. ( other side of the engine). Also - you should not charge battery using this metal pin for the booster. Charge should be done directly to the battery.

Hi I have 2015 Highlander Hybrid and am going for 2 months vacation. Should I remove 12v battery or put trickle charger on it, Cant find much information online for hybrid vehicle long term storage

Would the mirror tilting adjustment work if I install the motor in one mirror and work on the other mirror at a later time? It's time consuming if doing both at the same time. Thanks! Also how long was the installation for you?

I just got a 2024 bz4x and I have a nema 6-20 plug in at home house. Would that be sufficient for the car to charge it fast enough?

Thank you

Tank you v much Is it suitable for rav4 model 2024🌺

Thank you very much for making this video. The fuse tapping part (from 2:26) was very helpful, including the instructions on how to open the trim for the ground connection. This video is equally applicable to the Toyota Kluger 2017 model. I didn’t have a tester light, so I used a multimeter instead. For the battery, I used the "DOME" fuse, and for ACC, I used the second charger fuse point. After completing all the fuse taps and the ground connection, my dashcam wasn’t getting any power, which left me a bit puzzled. I checked the voltage levels at the fuse points, and everything seemed fine. Later, when I started the car, the dashcam started working perfectly. My dashcam is a BlackVue, and I guess it needed a kick-start for both the parking mode and ACC mode to begin functioning.

What’s your feedback on the viofo dashcam? Any issues?

Charging your bZ4X at home gives you peace of mind. With a Level 2 charger, you can easily manage your daily driving needs and never worry about range anxiety or waiting for a public charger.

Great job! Can it function well when parking outside under icy temperate?

Canadian here. Will this charge with a level 1 in the cold? I’ve read that it struggles.

Bro Thank You!

How to prevent the fuse from being blown? Is it simply keeping the light off until the installation is complete?

This was a great install. Very clean and great job explaining.

This man walked so that we could run. Thank you for prying off your back panel - was very worried about snapping something but your video will be insanely helpful to pre-locate the attach points.

Thank you for this even the dealership couldn't figure it out

Hey, how has the low voltage detector been working? Does it actually shut off at 12.4V? Any issues with the battery after it shuts off?

Appreciate the detail! Mine went smoothly thanks to you!!! @johnshepherd2666 needs to learn to fast forward. Push the right arrow. :)

Would this setup be able to support a fridge in case of emergency?

can you power a fridge with this setup?

You would get the blue one cuz white didn't exist at the time 😅. Also, you should get the additional center tray, has 3 compartments, so useful!

I would use it in a similar fashion to yourself--mainly for home use.

If i want to use the Ioniq 5 to feed my tiny house in Greece, do i need such a complicated setting?

great job

Thank you so much man, honestly trying to do it with one hand while trying to video had to be hard but it helped me install it in under 10 minutes. Much appreciated!

Yes. I want to know more details on the solar panel system!

Why not just use a single Nema 5-15P male L14-30R Female,

I can’t believe these cars doesn’t have folding mirrors.

Dis you buy a Toyota OEM TPMS or a cheaper, non-OEM works fine?

Thanks for the video! Were you able to close the fuse box with the cover or did you have to lear it uncovered?

I drive a 2009 Rav 4 base trim. I'm guessing it's probably the same installation execpt for the rear camera? Because my model opens the rear door sideways. Has anyone installed it on an older model?

It’s amps! Not ampers 😅

Is Toyota bz4x 2024 still has same issues?

Are you able to run a microwave off a 1200wt invert?

10:27 - Looks like the most difficult part is getting the wire through the grommit! Why not avoid squeezing the wire through and create a hole on both ends and run it parallel to it? Its exposed to the elements, but looks like the wire comes well insulated.

I'm puzzled by the conversion of 1 phase to 2 phase with a simple extension cord? How does this power all of the breakers in your box?

For gods sake...get someone to hold the camera when you make videos 😮

Great job, very helpful. Now, I usually change my own tires but I'm a bit hesitant to do these. I know the jack point is front and back BUT do I need anything special other than the breaker bar, torque wrench, jack etc. I saw a video online with some plastic guide pins or something. I don't remember if we got those in our kits in the trunk. I'll have to check but I do want to change the tires myself as I have summers on RWC mags and winters on the oem mags. We'll see I guess. Edit: here's that video I was talking about, the crown I believe but uses same/similar bolts? kzbin.info/www/bejne/j6Gqg3xrg8mtfZosi=ZwBIZ0EUXnCcLlF2 Will you be changing your mags yourself, do we need anything special? I thought I remembered seeing on the fb group that a special part was needed to swap out the mags.

you sold your bz4x, do you miss it? i just bought used.