Lunati Cams

Пікірлер

@lionelwells5618 3 ай бұрын

Good info

@charlesdalzell4061 5 ай бұрын

The sound interested him, the difference it made is where it began, and he wanted more…

@kelly811 7 ай бұрын

Richard. You need some ground straps on the engine to the dyno. There is serious arcing between the exhaust collector and the engine. Maybe static electricity?

@gordocarbo 5 ай бұрын

Good eye I didnt see that Think the sparks are from Richards brain working overtime Man if I owned an engine dyno and flowbench nobody would ever see me again.

@gordocarbo 7 ай бұрын

Watch the video and read before asking redundant questions...or google . If you dont like watch something else. Crybabies I swear RIchard...sure would like to find another 300-36 like the one in the vid. Loaned it out never saw it again

@markpushinsky5027 8 ай бұрын

the power rating is obviously going to drop do to no fan is attached to the pump that has a power draw. prefer fan clutches over fixed or flex fans . others like electric fans. prefer mechanical for reliability.

@gordocarbo 3 ай бұрын

Same...going back to mechanical with an electric as a fail safe/backup for real hot days Cant stand the constant rise/fall temps with the electric..they suck in my opinion at least most aftermarkets OEM different story

@mphsrick43 10 ай бұрын

Sadly Joe passed away this morning.

@patricklandon8399 10 ай бұрын

What kind of fist gear u use?

@gordocarbo 3 ай бұрын

THere are no gear changes on an engine dyno.

@weskirkland5850 11 ай бұрын

2:57 Whats the idle sound like? I'm buying this solely based off the idle sound. The point of the cam like the thumpr is its slow idle. If you don't show its slow idle the video is pointless. We can get better cams with more power not worrying about idle. This ones different. okay it made said amount of power. How's it idle? Hows it idle? Hows its idle sound?

@gordocarbo 7 ай бұрын

Why buy a cam based off an internet vid? These are similar in theory to the thumpr 2 brands owned by the same investment group far as I know. Old Harold B would be turning in his grave lol

@gordocarbo 3 ай бұрын

NEVER buy a cam based off of how the idle sounds, dude that makes NO sense at all. Any perf cam is gonna sound good so get the proper one for your car so its not a pooch.

@mleon77 11 ай бұрын

Tenn. MUDD. Bahahahaha

@mleon77 11 ай бұрын

1 ¹/² hr trans swop. No Joke brothers

@mleon77 11 ай бұрын

Still alive and wise. 🤜🤛💪🤘🤘🤘✌️

@mleon77 11 ай бұрын

You know that whole county's gunnin for ya

@exploranator Жыл бұрын

I like watching pretty well anything Richard does.

@raywaltdecuba5699 Жыл бұрын

Lunati 10350702 Voodoo 219/227 Hydraulic Flat Cam Ford in a stock engine? could this work or would i have PTV issues?

@cliftonthomas2725 Жыл бұрын

How does the lunati cam compare to the Ford x303 cam

@lordsauto Жыл бұрын

Didn't hear anything

@TurboHDT Жыл бұрын

I purchased a Lunati crank for my turbo LS but I went with Manley h-beams and JE pistons Manley have been around since jesus played 1/4 back for the Jerusalem

@ericwright5419 Жыл бұрын

I'm waiting fetnal cam are meth cam

@prestonrieger8410 Жыл бұрын

Pretty weak for an aluminum headed 383. 105-106* lsa would have pumped up the torque a bit.

@Bobcatspiritdude Жыл бұрын

Illuminati cams for the win

@thereluctantgearhead4544 Жыл бұрын

I have the 240/252 bootlegger cam. Highly recommend. Rowdy "street" cam.

@RGCJ8763 Жыл бұрын

I built a 383 Chevy 7 years ago with vortec heads I pocket ported and 2.02/1.60 the valves. Installed a hyd.roller comp 280 magnum cam and customers edelbrock performer and edelbrock 600 carb. It dynod 437hp and 479#/ft. So I'm not impressed with these numbers and these parts in this video

@SnakePliscan Жыл бұрын

Your single pattern cam setup made some serious power !

@thereluctantgearhead4544 Жыл бұрын

Those Holley heads suck and it has low compression. Piston probably .030 in the hole with a .040 thick head gasket, dished pistons. Plus it's the smallest version of that cam. The big one is way better.

@stevencaskey9440 Жыл бұрын

With cams on the bootlegger brand we're made for my 429 Big Block:(

@stevenmartinez6531 2 жыл бұрын

You can't hear them

@jasonritchie6827 2 жыл бұрын

my question is did the original moonshiners cars have that lumpy idle ? were lumpy idle cams even available to the them back then or did they re grind their own ? or were they all standard cams and big carbs and straight exhausts ???

@zAvAvAz 2 жыл бұрын

It would have done way better with AFR 195cc comp cut heads, must have been some holley systemax II heads or something. May need more compression also, probably 10.5:1 would be good depending on the cam specifications

@gordocarbo 5 ай бұрын

Yes systemax. Eliminator heads werent out yet when that Holley pkg was big.

@jesusyeshuaelelyonelshadai6295 2 жыл бұрын

Will it rev up faster with a lightweight crank?

@GoingBracketRacing 9 ай бұрын

Yes

@shaneshane1379 2 жыл бұрын

Oh yeah? Well, one time on a Thursday night, I made an extra250hp more with a stock cam. Then on Saturday morning I was pulling my engine. Damn nitrous and cast pistons!

@booperry1719 2 жыл бұрын

Don't know how the engine got running without your help but I guess talking take's up all your time

@Turbo8secondz28 2 жыл бұрын

What happened to your voodoo ls 3.622” crankshaft? Says everywhere discontinued…. I’m trying to buy

@jeffpeterson1957 3 жыл бұрын

Did the pistons need to be notched for either of these cams?

@ronnieyoung7510 3 жыл бұрын

Great stuff

@ronnieyoung7510 3 жыл бұрын

I have a Chevy Malibu 78it a small block Chevy in it 60 over it's got four things in the rear floor speed I want to know if this can work on the street I have the part number to lunati pm part number is 10 12 0705 the grind number is dh35 dash vh36- 110 I hope you can answer my question for me

@jjmccloud 3 жыл бұрын

But is it worth a damn 🤔 thats the question

@bryanduncan1640 3 жыл бұрын

Surely this video should be called “How we took somebody else’s crankshaft and cut/ground bits off of it”?

@zachscott-parkinson9285 3 жыл бұрын

What he mean by base lined it?

@jjmccloud 3 жыл бұрын

Getting dyno numbers with stock cam first

@garymathews4042 3 жыл бұрын

I liked the cam specs on the sbc Voodoo cam for my 427 sbc

@wyattshelton2080 3 жыл бұрын

427 small block?‽

@fuhkoffandie 3 жыл бұрын

I have a question....is it ok to use crappy, push-in stud, 1973 302 rocker arms for .500 lift, or smaller, cams, will they have enough slot, or do I increase the slot to accommodate them?

@jjmccloud 3 жыл бұрын

I don't recommend. 500 with push in studs myself but it is possible its just kinda riding that thin line. Its risky and could go either way at that lift, but people do it all the time if u can at least pin them at the very least you'd be way better off

@fuhkoffandie 3 жыл бұрын

I'm using lunati voodoo 499/483, in a stock old 302.....I love this thing good street manners is what I needed. Next to the old one it looks 1/4" taller, lol. All kinds of duration is nice, until you have to drive it every day...

@timm5970 3 жыл бұрын

So the cam you chose idles good? Ive been thinking about rebuilding my 5.0 explorer and im looking for a cam that isnt lopey while providing performance. So far this lunati 711 is the frontrunner but i didnt get hear it idle really

@AB-80X 3 жыл бұрын

I tried contacting you and I never heard anything. How can I order a custom cam if I cannot get a hold of you guys?

@peterbilt6662 3 жыл бұрын

You keep contacting. If you really need something then you keep knocking. If you dont keep knocking, God wont open.

@AB-80X 3 жыл бұрын

@@peterbilt6662 It should not be that hard. I did get through and I got an apology with a nice discount. Have not had issues since. My fear is that it turns into the mess Comp Cams customer support now is.

@peterbilt6662 3 жыл бұрын

@@AB-80X yeaa! Thats koo man. Are you using a lunati cam with lunati lifters?

@AB-80X 3 жыл бұрын

@@peterbilt6662 I got a custom version of their TL2 40110964 but with .490" lobes and use it with Isky bushed lifters. Lifters is often the reason why solid roller engines fail, and I'm not willing to compromise. I'm sure the Lunati lifters are great, but Isky and Crane is what I like to use, and Crane is out of business,

@peterbilt6662 3 жыл бұрын

@@AB-80X oh man. Im thinking about running clay smith roller lifters with my roller comp cam. Do you thinknits a good combination?

@bobhadababy4542 3 жыл бұрын

might be a good video if there was any sounds other than the overplay music

@donellmuniz590 3 жыл бұрын

Well, no wonder the damn things are so expensive!😕

@jryan2313 3 жыл бұрын

Volume!

@bigolfordf1502 3 жыл бұрын

Man I hate it when people put a motor on the dyno with a electric water pump what should be done is how it would be in the car with all the accessories and give a real number