With MTB's or any cycles they use rim tape to also make sure that the tube does not have any rough edges but man this is a total valve rip off and slime would not have worked. Nothing much you can do when this happen as its almost like a quick loss of air and if the tyre is soft its gone. I had a fall like this a few year back on my road bike where the front tyre just gave away and I was doing push ups on the road with skinny cycling gloves. Not fun as it happens so quick. Hope the new tubeless setup is going to be better. You also get tubeless specific slime that might be a second protection. Keep well.

Glad you are ok and the gear worked. This is also one of the things in the back of my mind the whole time when riding on the road. If you do fall I am fine with that but its the other people around you that might not be quick enough to react and can hit you. That road is super busy and the cycle path is narrow. I am just glad you are ok. Keep well and hope you get back riding. Did you have slime in the tube and wonder if that would have helped.

Yes, this is a hobby. But in isolation, these are still legitimate vehicles, using some rapidly developing tech. And they cost as much too. Dropping a hobby is one thing. But selling off any particular mode of transport is part of the EV game. Losing a riding buddy is always tough though.

Lifetime warranty means changing for a lifetime , Toyota will last longer

So do these feel in any way different to the original shocks like do they bottom out less easily or is it just like the same essentially just maybe more durable?

🤣- A.I. Marty Welcome Aboard Sir !!!!! 🫡

How do you know the impact didnt over tighten the lugs. What your doing proves nothing with your torque wrench. They could be at 100 ft/lbs and of course the torque wrench will click.

Odd question but are you bow legged?

Este tipo de video es lo que llamamos un "perenne", 11 años después todavía tiene valor. Por cierto, será mejor que obtenga un favorito ❤ por este comentario. 😁

... interesting vid man,,, yea, so, regarding u'r knees,, I can recommend 'Bed of Nails'!! $20 gets u a pain free future!!, lol. I could just about touch my knees to my accupressure mat at the beginning,, too painfull,, but now,, I can lie on it for 30 minutes pain free,, actually enjoying the experience!! (I also don't use it as often anymore,, it really works!!!)

This wheel is a great size for the "last mile" as you said. Some areas public transport doesn't allow big battery items like this and if needed you can conceal it in a (large) backpack. I had the solo wheel Glide 3 in 2018 and loved it as an alternative to my larger wheel when I just needed to make a quick run to the mini Mart or whatever. Sometimes you don't need a cannon to kill a mosquito

So smooth when going downing stairs!!!

Sucks that BBL is alienating their user base right now.

Gotta love all the "unbiased honest" reviews on bambu labs printers!!! No doubt in my mind they were all compensated in one form or another for the splendid reviews. I wonder how the people who purchased bambu printers based on those reviews will feel after the updates? This may be just the beginning. Could a subscription model be far behind?

Bambu is changing is TOS to lock users into its software , controlling how you print and forcing slicers like Orca out. They're dead to me now. Selling for another brand. Go look it up.

Cool

I have a Qidi Tech X-Plus II , it is a few years old now but it has proved to be a workhorse, very reliable fully enclosed printer. It doesn't have some of the auto-bed levelling features, perhaps not as fast and not multi colours. None of these things are anything too me so that's not a problem. I have multiple extruder assembles for the printer which makes it easy to change nozzles and and materials very quickly. For EUC's I have printed handles (ABS), foot-stands (PLA), EUC Stands (PLA), seats (TPU), power pads (TPU), even pedals/footplates in carbon fibre nylon (Nylon PA12) for my Ninebot One E+. My printer is in my workshop and I send files to it over the network from the house because I am a little concerned about microplastics (enclosed printer with home made carbon filter) and fumes particularly for ABS. I have a sensible (not so sensible) selection of Benchy's in various materials as well 🙂 Would be interested to see some items in multicolour, labels, signs, models, all come to mind. If I design anything I do it on AutoDesk Fusion, but that's a whole different story, I find that by far the most difficult part of the process depending on what it is I wish to make.

3 steps to remove and 3 steps to replace. Be sure the 12v battery is healthy. kzbin.info/www/bejne/qITMaaOQrZ2fi7s

IT's NOT the Red Triangle of Death. It's officially the "Master Warning Light". Low oil can trigger it as well as many other problems with systems.

My A1 is going to be delivered next Thursday! I can’t wait. For the Horde! Great review Duf.

Upgrade the printer Hotend for even better results

Why not sell the Prussia 3, you don't need that one since you already have the 4.

"I'm not going to do an unboxing". Proceeds to unbox the printer 🙂 Welcome to the future Duf 👍 I got a kick out of how impressed you were with the speed. What's funny is that this is my first printer so I wasn't as impressed with the speed since I had nothing to compare it to. Cool to see your first impression ✊

For the Alliance

FYI in Davinci Resolve you can do voice isolation and it will remove the wind noise post edit. Easy one click fix. Great video by the way

Nice👍 Is your table shaking, I seen the spool rack shaking. I have my old Ender3 sitting on heavy interlocking stones so it minimizes vibrations to the table Cheers

Hey Duf curious what made you go with the A1 over the P1S with AMS. New to 3D printing and been trying to decide for a minute.

The device I probably didn’t know I needed!

Glad your new printer is working out! Bambu has some great printers. Creality just unveiled a new printer at CES that prints 8 colors with no tool head change and no poop!!! 3D printing has taken some big leaps since I first got interested in it.

I’ve got the Bambu X1C Carbon, love it. So much better than my previous generation printer. Even at this large size, some things I print challenge size capability.

I bought the A1 to make some pads for my Lynx, a few weeks later i had to get another with AMS just to keep up with my new addiction, they are so fast it's unnerving to watch, kind of like a good EUC/rider (also, you need to try tri-color metallics silk filaments from Ziro, and fiberflex 40d TPU is the best for EUC pads)

Yeah that vibration compensation is like wizardry Our Bambu shakes like crazy at high speed and never misses a beat, perfect prints every time

I’ve got the A1, 2x A1 mini’s and an X1C. If you like the A1, the X1C will flip your lid. Congrats mate.

Hows the clark race kit treating you? Im tempted to pull the trigger my only concern is the lack of front grab handle and front kickstand. Can you set this wheel down on the front and where do you lift it from? TIA! 🤙

👍 #seated

أعطيني من فضلك الطريقة كيف تضعها في وضع المدى البعيد

#seated great video

Bought a second hand V13 with 5000km on it. Look like the previous owner went ham with it offroad and busted the suspension. Ordered the air shocks you have from the same company. Had to order limiter washer from Aliexpress, since no vendor in North America sell them and vendors from Europe don't ship to NA. Waiting for them to arrive and get to start rebuilding. Sounds like it's working great for you.

Wow Duf, between you and Mary Backe, I don't know who is more laid back.

Generally any wheel doesnt like to be sat on while stationary for more than about 1 minute Id say. It causes wheels to overheat as well, it seems to draw a lot of computing power on the controller for having to constantly adjust back and forth while not rolling. Ive had wheels also power off while sitting before and then had to turn it off and on again. Its not just the v13 that does this. That suspension is really quiet, thats a nice benefit for sure. Great video!

👍

#standing. 😊

Yeah, if it was a Begode wheel sitting on it with a blew the motherboard I don’t think you can do that with any wheel. It’s like doing a pendulum constantly easy to overpower the motherboard or overheat it be careful, bud.

Same thing happened to me on a Master v1 I don't have any Begode wheels now - the Patton is all I need.

Kingsong gets a lot of grief but my favourite wheel is the S19. Good suspension and not too heavy. Good pedal height. I rarely ride my ex30 anymore. Really starting enjoy lower pedals and lighter wheels. Wish the top speed was 45 mph though. Just for the margin of safety. I would consider another singsong wheel.

In so many professions the client has reliance upon thorough quality assurance. Looking at what can happen (injuries, property damage, loss of life or even just inconvenience) full testing and accounting for all use cases it seems better to have real life use to make software robust. Those in house tests sitting a wheel on a testing platform like a treadmill might help with mechanical but only limited software testing. Who does the most real life testing?

#seated looks weird and uncomfortable

#werewolfOFnaples 😮