Another helmet nanny. Why can't these people just worry about themselves?
@Avatarlover0823 сағат бұрын
i’m having more of a pain locking the fold back in place when i need to ride it
@KingKatura4 күн бұрын
what would cause a shimano shifter to not be able to go back down to one? First it wouldn't go back to 1 then it was 2 now 3 is the lowest gear i can put it in... ITs a brand-new bike is it a design flaw?
@SeymourKitty5 күн бұрын
Or you could email the bike company and they will send you a battery shim for free
@mluterancik7 күн бұрын
What about 13 through 20? Lol
@datboi68187 күн бұрын
I can’t get the damn tire back on 😡 the stupid chain thing is just in the way and I can’t push it any further the tire to reach the slots HELP
@datboi68187 күн бұрын
I can’t get the damn tire back on 😡 the stupid chain thing is just forcing me out and I can’t push it any further to reach the slots HELP
@luislozano42519 күн бұрын
Whats better Acera m360 or Acera m3020?
@luislozano42519 күн бұрын
Whats better Acera m360 or Acera m3020?
@RobertWrayGuitar11 күн бұрын
Good explanation of proper shifting. This should cut back significantly on repairs.
@jimfowler762812 күн бұрын
SAPIM LEADER J BEND BLACK 12G OR 2.6MM SPOKES, Spoke Length 130mm Qty 10 SAPIM 16MM 12 GAUGE SILVER BRASS NIPPLE SAPIM16MM12GAUGESILVERBRASSNIPPLE Qty 10 under $40 for 10
@skeeter211213 күн бұрын
Thank you!!!!!!!!!
@leftcoastlefty5514 күн бұрын
Not sure why you need a lower low. Why not just replace the front sprocket? Don't need low anymore with electric. Need higher high with 20" wheels.
@ErosVampire14 күн бұрын
Thanks so much!!! I have the 3.0 and this translates to it perfectly nonetheless, next time im hundred 100% spending the money on a stand lmao cause i spent an hour doing it without one just now and I will never do that **** again lmao. For anyone doing the 3.0 the cable is a bit shorter for power making it much easier to pull free.
@Seankilpatrick-je1bs14 күн бұрын
chris I see your videos my question is how do you change the control thing by the battery I had this bike for about 2 yrs with no problem until now I was riding it today and it just comply turned off and had to turn the key off back on then it started then shut off again the battery is only 4 mons old what can it be ?
@slevmo17 күн бұрын
Awesome video. Very detailed, just what I needed. I’ve been wanting to take my bike in to have my front end tightened up, no need now, thanks so much.
@trini_boi241417 күн бұрын
I have the same bike.. shifting is fine but when it shift to the largest cog the chain is rubbing on the tire side wall..do you know how i could fix this?
@andyaslamazashvili466119 күн бұрын
I don't see any essential differences that you'll have to upgrade to 3.0 if you already own 2.0 Those differences are basically only cosmetics.
@trini_boi241419 күн бұрын
What happens if you run out of adjustments on the barrel adjuster? I mean like if you screw it all the way out and still don't get the correct adjustment?
@AnthonyLinsalata-h8j20 күн бұрын
Does that only work on that bike you're working on? Or would that work on any electric bike? I'm talking about the hydraulic brake setup you have ordered.
@MrMarZeePan21 күн бұрын
I followed this guide, ordered that new cassette, installed it… WOW I can actually pedal into the top gear now! My Expand 5 feels like a real bike now, instead of some under geared kiddy cycle 🎉
@belgiandip868221 күн бұрын
Super helpful. Thanks you!
@bombflames795922 күн бұрын
Thank you very much. I was trying to find this model it helped me fix my derailleur. I was worried i needed to take my bike in!! Took me a minute how i fixed my problem but this video helped me LOTS!
@imagineengine23 күн бұрын
So.....I thought this was a video focusing on how to get your heavy bike into a repair stand but you used up half the video describing how to remove the battery out of your Lectric bike which only about maybe 3% of us will have.
@davidkabara602324 күн бұрын
Great video, thank you!
@dinky1981025 күн бұрын
If my bike goes up to 20mph, I'd rather the single gear. I went with the lectric XP lite 2.0. 7speed is better on a regular bike.
@mrbigshot18025 күн бұрын
Thanks so much for this video. My only problem was in trying to remove that Phillips head screw. You did mention it was a "funny" screw. I decided to leave it alone, but had to use the "L" shaped wrench to get to the 6mm bolt. Since I didn't have the leverage with the preferred Park Tool, I took my rubber mallet and hit the smaller wrench a few times to loosen it up. I was a success. Turning around the handlebars is a game changer for me. I have learned so much from you. Also, your video on adjusting the derailleur on my XP 2.0 saved me. You're the BEST!
@dinky1981026 күн бұрын
Would this work on the lite 2.0?
@casycasy519926 күн бұрын
you need to do a lectric 3.0 from 2022 to a electric 3.0 now there is a a big difference in the throttle. I hate the new bike
@YoureNowOnTV26 күн бұрын
Thank you ! 😀👍
@thomasjue153926 күн бұрын
Lots of good tips and encouragement. Much appreciated.
@Allaiya.27 күн бұрын
As a complete novice, the shifting tips were very helpful. Thank you
@ross-y1z29 күн бұрын
This video was perfect! Nicely presented!
@johnlocke868Ай бұрын
@12:44 rubbing and the grindin and the rippin and the tearin
@donmc-vi5tfАй бұрын
Looking for same instructions for the rear wheel Need to clean and grease the motor
@VentureNWАй бұрын
How is this freewheel holding up? I have read that the teeth are thinner and the plating is crap. How does it feel? Thanks for the great video, btw!
@user-wd8ig5fe3sАй бұрын
I got flat rear tire by a staple last week and my local pro shop don’t patch it. Replace inner tube plus labor $45. Asked to add Slime for extra, he said waste of money. Exactly a week later I got flat again. This time I learned and patch myself. Will add slime or flat out soon. Thanks for this video. I’ll have to replace both tires soon with road tires. Hope I can do it on my own. Thanks for this helpful video.
@adrimntlr7767Ай бұрын
Excellent, thanks to this video I managed to solve my problems . ( clicking sound of loose spokes). Saved me bringing it to the bike shop ( long waiting list ) and saved me 75 CHF. Just observing the exposed threads ( a little more difficult mine were black and not silver) helped tremendously. Tightening is counter-clockwise. I don't know why Chatgpt said otherwise. Thanks again.
@wanagiandmeАй бұрын
GREAT VIDEO!!!!!! CLEAR CONCISE INSTRUCTIONS
@stephenrice_ukАй бұрын
Thank you it helped and saved me money having to buy a hydraulic stand one cheers mate
@hsd9690Ай бұрын
This worked except unfortunately my pliers could not cut the end, but they still work
@louren1951Ай бұрын
Very nice video, thourgh and easy to follow, thanks!😊
@rotoconversions2400Ай бұрын
Loosening the back side bolt 1/2 turn stopped the pad dragging on inside rotor .not much info out there thanks.
@miguelromanableАй бұрын
Great video! Thanks!
@717rocketАй бұрын
My front wheel squeals bad since new.
@dolittle6781Ай бұрын
Thanks for showing us this but it’s no longer fun when a cyclist has to fix their bike especially more than a couple of times a year-and only very basic fixes. Have a ten year old General Motors car still like new, and all I’ve ever done was get an oil change and a lube when the car’s computer reminds me. That’s the kinda bike I have. Very low maintenance hybrid with front and rear derailleurs . Have maybe eight thousand miles of urban miles on it! Great bike that can take me pretty much anywhere I want to go. Don’t understand why people seem to have a need to work on their bikes so much. Are they abusing their two wheeler?
@ziblot1235Ай бұрын
I thought that a oof the parts on the Shimano were connectd with Torx wrenches. I tried to use the Torx tool that matched but it woudnt move. My hanger is snapped in half so I neeed to take the old one off. Where can I get a derailleur hanger, and DONT SaY Lectrick. They have never been helppful at all. I didnt have thaatsafety washer for the Gear side and they said "Buy a new bike".
@vinnitca1990Ай бұрын
Good and clear tutorial ! Tanks very mach.
@kaytee7607Ай бұрын
I don’t have a lectric, but I have a similar build as this one. Great video! 👍🏾
@BrianMillard-x2sАй бұрын
How do I make my Isin wheel U5 bike to go faster than 20mph? Do I need to upgrade any parts?