01-05 Lexus is300 upper control arm replacement / HKS axle back install

[@DaKeeg01]

Hey, like the new video intro man!

[@Sadgittarius]

Leave the key in (ACC two clicks) for approximately 7 minutes. Turn the key back to off position and back to (ACC) then turn it all the way to (ON) and the car will turn over. It’s an immobilizer issue after having the battery removed or replaced.

[@fixitish]

Good to know, this is the first time I’ve ever had this issue with any Lexus

[@niepamietam36]

Dzięki ci za ten film .... Pozdrawiam z Polski ;-)

[@titusyang]

Nice details!

[@HarryDang-p6e]

Ty for the video bro but my two screws isn’t coming out at all

[@fixitish]

@@HarryDang-p6e which ones won’t come out?

[@HarryDang-p6e]

The upper control arm screws or the screws that holding the upper control arm

[@Imjesus26]

For the upper control arm in the front, my is300 has camber & i want to uncamber it so the tires don’t bald easily. Do i replace the upper control arm to uncamber it or do i just raise the car up?

[@fixitish]

@@Imjesus26 you can raise the car up and it will fix it but if you wanna keep it lowered then you’ll need adjustable front upper control arms

[@chrisaldana9020]

did you loosen the bolt under the ball joint before using the separator?

[@fixitish]

Yes 👍🏽

[@kaliehulumamo]

I hope the front are better than the rear upper control arm because the rear split in half after 3yrs.

[@niepamietam36]

Witam. A możesz podać nazwę lub link do tego wahacza tylny górny ... ?

[@fixitish]

It came in a kit for the front and rear. I’ll link both the kit and just the rears

[@fixitish]

www.ebay.com/itm/151905464882?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=71otcnbtSYO&sssrc=4429486&ssuid=3S3RG4RHQmq&var=&widget_ver=artemis&media=COPY

[@fixitish]

www.ebay.com/itm/152995359104?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=GzIIAA2kQIm&sssrc=4429486&ssuid=3S3RG4RHQmq&var=&widget_ver=artemis&media=COPY

[@niepamietam36]

Bardzo wielkie dzięki... ❤ Ratujesz mój samochód ...