Definitely DO NOT spray IPA or any other cleaning agent onto the rods, spray onto a cloth and then wipe. Spraying in the enclosure results in covering the belts (rubber and alcohol don't mix, will dry out and crack), covering the linear Y rods and removing all the grease from inside which you can't repack, spraying onto the rods is terrible advice unfortunately. Follow Bambu's maintenance guides to prevent damaging your machine. Also probably best not to use oil on the lead screws, oil can run down the screw and into the stepper motor below (very bad), again there is a reason why Bambu specify grease and not oil 😵💫
@MarinusMakesStuff Жыл бұрын
Yeah, there's a lot of bad advice in this video. Clearly not made by someone who knows how it's supposed to be done. Also... using compressed air to clean a machine? Really not done. This will only blow dirt into the small crevices, making the risk of jams bigger.
@bilbobagend8155 Жыл бұрын
To be fair, the official rod cleaning video published by Bambu Lab's youtube channel had them spraying alcohol on the rods. Not that I'd ever think or want to pour isopropyl into a spray bottle.
@joeyhouben3270 Жыл бұрын
A paper towel? why not a micro fibre cloth..? also why lubricate only one off the rods and not all? I got more questions then answers....
@trigga31 Жыл бұрын
@@joeyhouben3270I think he was just using the one screw for an example. I’m with u on using the microfiber towel
@TonyShuai10 ай бұрын
Please do not pretend to know everything but know nothing, the oil will destroy the motor? That is the biggest joke I have ever heard. 😂😂😂😂
@jraiello Жыл бұрын
A few suggestions, do the cleaning of fans and extruder before other maintenance. This will avoid getting crap on your newely cleaned and lubricated z rods, camera, fiber rods, etc. just makes sense, rough messy stuff always first. Appreciate your video, just reorient the sequence of steps.
@michaelm4946 Жыл бұрын
After a month of printing on my XC1 Carbon, I was looking into doing PM on it. This video is spot on for what I was looking for. I appreciate you being awesome.
@TheEdgeofTech Жыл бұрын
Great to hear Michael! I'm glad it helps!!
@greghumphreys1619 Жыл бұрын
You've produced several videos on the Bambu Lab printer that have been useful to me, and I just wanted to say thanks.
@TheEdgeofTech Жыл бұрын
Thank you so much! I really appreciate it! I'm glad the videos help!
@Nastynik915 ай бұрын
Serious jack black vibes. I love it
@jasonconstant4555 ай бұрын
I watch this video every time I maintain my X1C thank you so much for the great videos. I would appreciate it if you added sections to your videos especially this one, so we can quickly navigate to the different steps! I love your simple and easy presentation style and your obvious vast knowledge of 3d printing.
@Cheddarsharp Жыл бұрын
I just got mine in yesterday and waiting to set up this weekend. Saving this bad boy for monthy maintenance. Thank you so much for providing this for use newer to 3d printing people! Also all these x1 videos makes this the easiest subcribe of my life
@allansteffensen5646 Жыл бұрын
Good video..but quit using regular paper towel!! That is leaving fibres behind. Use Blue shop towels or a microfiber cloth instead. Otherwise you are just adding to the problem of leaving bits behind on your rods and lead screws
@TheEdgeofTech Жыл бұрын
Great advice! I used it because that is what most people have laying around. But if you look at the description, I linked the blue shop shop towels! :)
@MistrWeh Жыл бұрын
Careful with these microfibre stuff, might scratch glass or the coatings on the glass. Consider buying some optical wipes for this purpose
@kyleirelandtech Жыл бұрын
CHAPTERS 0:00 Intro - 10 Maintenance Tips 0:14 Note - Bambu Lab Printer Compatibility 0:35 Removing AMS 0:51 Removing Top Glass 0:57 Cleaning Rods / Belt Tension / Error 1:09 Turn it OFF! 1:18 2mm Wrench - Loosen Four Screws 1:30 Isopropyl The Rods / Moving Head 1:41 Wipe until Dry / Paper is clear 1:59 Moving Gantry - Front to Back 2:08 2mm Wrench - Tighten Four Screws 2:19 Turn it ON! - Self Test Button 2:31 Very Important Steps Completed 2:40 Cleaning / Lubricating Z Lead Screws 2:55 Keep it ON! 3:03 Move Bed to Bottom of Printer 3:13 Lead Screws Cleaning / Isopropyl Thin Coat 3:39 Applying Synthetic PTFE Oil 3:46 Small Drops goes a long way! 3:53 Homing to spread Oil 4:03 Applying Oil to lower Lead Screw 4:15 Cleaned and Lubrication Completed 4:21 Recommended Lubricants 4:31 Quick Message - Thank You! 5:03 Extruder Cleanup 5:12 Lift Off Front Cover / Compressed Air 5:23 Optionally Remove Extruder and Clean 5:41 Cleaning the Fans - Important! 5:56 Compressed Air - While OFF! 6:16 X1 Carbon - Cleaning Lidar Lense 6:40 Cue Tip and Isopropyl - Lidar Lense 6:48 Gently Cleaning Lidar Lense 6:53 Lidar Lense Cleaned! 7:03 Cleaning Camera - Cue Tip 7:19 Gently Cleaning Camera 7:34 Camera Cleaning Notes 7:42 Checking Filament Cutter 7:50 Filament Cutter Replacement Frequency 8:18 Remove Hot End Cover 8:20 1.5mm Hex or Allen Wrench - Cutter Arm 8:58 Nozzle Wiper 9:20 2mm Wrench - Change Nozzle Wiper 9:48 Note on supplied Cutters and Wipers 9:58 X1 Carbon - Check Carbon Air Filter 10:14 Changing Carbon Air Filter 10:47 Changing Desiccant 11:23 Optionally Cleaning Dust AMS 11:34 Closing it up! 11:43 Maintenance Completed!
@radish6691 Жыл бұрын
Thanks! He’s at the edge of tech, hasn’t quite made it to “tech” 😂
@legocircus Жыл бұрын
Thank you so much, @kyleirelandtech!
@Martial-Mat8 ай бұрын
Nice one, cheers.
@DJ-Leo-3D9 ай бұрын
You have inspired me to start 3D Printing and I thank you. You make feel comfortable about 3D printing. All your information really helps me a lot I can’t thank you enough.
@TheEdgeofTech9 ай бұрын
I appreciate that, and congrats on 3D printing!
@guillaumemolter Жыл бұрын
This video got you a like and subscribe. With this machine being the “first 3D printer” for many users, I was surprised no one had done this already.
@monkeywrench195111 ай бұрын
This is still the best maintenance video I’ve seen. If you have any additional maintenance tips, please let us know. And Thank You very much.
@wolfe19704 ай бұрын
Ermm no its not, there alot of donts in this video.... IPA on carbon rods ? Spraying where it hit rubber belts that will dry out and crack ? Compressed air blowing crap all over your components ? Oil that could dribbling down into the motors ?
@Watch4Me Жыл бұрын
Fabulous video for new owners. I'm 90 days in and am going to check every one of the 10 suggested items.
@Engineerboy100 Жыл бұрын
Good job on the video. I will not be using paper towels though, I will be using microfiber towels. Thank you for posting this video. I just got my first printer 3 days ago and I'm trying to learn all I can. I got the X1 Carbon and so far I absolutely love it.
@KnodsilMemeMaker4 ай бұрын
Thx for the guide. I have the X1 Carbon printer for a year at this point and have been casually using it. Truth be told I havent thought about actually maintaining it, but I am going to order the items you used and give my printer the care it deserves.
@omnitravis4 ай бұрын
I really like the gta death effects when you miss bolts and things, its great. Thanks for all the info.
@markgwoodworth2 ай бұрын
One of the best training videos I have ever seen.. Thanks!
@skyrider4789 Жыл бұрын
Thanks for this video! I haven't owned my X1C as long as you and others have so it's nice to get the 411 & tips. Much appreciated! 👍 I've been subscribed for a while, originally for my E5+, but now with the Bambu, I'll add you to my best of list on my site! 🙂👍
@TheEdgeofTech Жыл бұрын
I'm glad it helped! Thank you for watching!!!
@UncleJessy Жыл бұрын
Ohhhh man I needed this video
@TheEdgeofTech Жыл бұрын
Right! I keep seeing it pop up in the groups, so I thought I would make a quick video. Thanks for watching!!
@azw4094 ай бұрын
After spraying the bars with IPA, I'm left with a sticky mess. Should i have used a 4% session IPA or a 6.5% double hopped IPA ?
@juansoriano84 Жыл бұрын
thank you man, amazingly useful!!! keep going with the bambu lab struff!! MEGA CLEAR all the explanation
@TheEdgeofTech Жыл бұрын
Thanks for watching!
@SuperFABRICATOR10 ай бұрын
Very useful and helpful video. Just received my X1 Carbon and so far aIready have about 100 hours on it and it’s quite a machine. Thanks again and now I’m a new subscriber.
@danyveilleux3864 Жыл бұрын
I bookmarked this video and doing my maintenance on a monthly basis. Thanks a lot Jim, it is very useful.
@jraiello Жыл бұрын
Love your mistake video inserts, this is how it goes and is fun in your videos!
@3dtechnologies153 Жыл бұрын
You are an asset to the 3d printing community. I miss the headbanging music though.
@riedling79557 ай бұрын
well done, been looking for something like this!
@TheEdgeofTech7 ай бұрын
Awesome! Thanks for watching!
@hermancircus Жыл бұрын
Jim, This video is fantastic! Thank you! Bambulab should immediately put it on their wiki site..
@TheEdgeofTech Жыл бұрын
Thanks!!
@koryyyy24 күн бұрын
I love that translucent extruder, mine is black and I had to take it apart 2 times to remove a piece of filament.
@SadSpaceDuck Жыл бұрын
Feels like an ad for IPA, haha great video was prompted to do all this with the latest update
@SangheiliSpecOp7 ай бұрын
Thanks for this vid! I don't even have an X1C yet but i'm saving up for one. I'm a stickler for good maintenance and after seeing how fast that thing prints and how complicated it is, I knew there would be some things to look out for
@baschz2 ай бұрын
Do they sell that transparent extruder? Because mine is black. Looks pretty handy to see if there's any filament debris in there, so you're not taking it off and apart for nothing when troubleshooting.
@Jok3rsFaVor2 ай бұрын
Dang I went looking for Lubricating tips for my new P1S.. Immediately knew this tutorial needs revision... No printer uses Oil on those rods, NEEDS Grease.. Very important.. I figured spraying alcohol wasn't the way to go, not to mention using non-woven paper towels vs normal ones.. Thankfully the comment sections really can help correct things..
@mircon2198 Жыл бұрын
Nice and Thanks, with best greetings from Germany
@harrymorris613 Жыл бұрын
Thank you for the video! What are the 4 bolts that you loosen at the beginning of the video, and what purpose does it serve to loosen and the retighten them? thanks!
@ktakeshi17Ай бұрын
Belt tension readjustment.
@fixumdude Жыл бұрын
Great video! We've had our kickstarter unit since last Sept and I was actually thinking just last week, "I bet I should be doing some kind of maintenance on this thing, I wonder what kind of stuff I should do?" So perfect timing. P.S. Love your magnets and stickers! (especially the blue one in the bottom 😉)
@TheEdgeofTech Жыл бұрын
Haha 😅😆 I thought you would like that! I conveniently put them there to see if you would notice for the video!
@justincider88928 ай бұрын
It's best practice to hold fans still with one hand and use compressed air with the other. This will reduce wear on the bearings and prevent a dynamo effect from putting electricity back through the system.
@K2Kevin Жыл бұрын
Great information, you’re always “Grade A”!
@TheEdgeofTech Жыл бұрын
Thank you!
@Spirited282 Жыл бұрын
Very good video Jim. Not a maintenance thing per say but i am tempted to ceramic coat the exterior frame. Have some that i use on my car, haha.
@TheEdgeofTech Жыл бұрын
That could be cool!
@Kungpaoshizzi Жыл бұрын
Always hold the fan before you blow so it doesn't spin
@IndianaDiy2 ай бұрын
I found on the Bambu lab wiki they mentioned some brand of grease instead oil or Super Lube 92003 Silicone Lubricating Grease with PTFE as an alternative but no oil for the vertical screws.
@goilo888Ай бұрын
FYI for people that don’t want to keep buying desiccant (I have no idea how much it costs), I have hearing aids that use a desiccant at night. Manufacturer recommends merely “refreshing” the desiccant by zapping in microwave for a short time. They change back to their original color and are good to go.
@DoRC Жыл бұрын
Is spraying a solvent on the rails and then running the linear bearings on them over that cleaner really a good idea? I feel like that's a great way to take whatever's on the rails and put it in the bearings.
@andyvannort2743 Жыл бұрын
Shop towels over paper towels to avoid residue. Also spray the towel not the Rods. Spraying hits the belts with ipa which isn't good for them.
@roidboyy939219 күн бұрын
I lubed the idle pulleys, but it still makes a scratching type of noise when it is prepping to print and when I do the maintenance. I cannot find where it is coming from.
@offsetmakerlab7514 Жыл бұрын
Great timing! Thanks, man!
@TheEdgeofTech Жыл бұрын
No problem! Thanks for watching!
@Monrath84 Жыл бұрын
Awesome, thank you for this!
@TheEdgeofTech Жыл бұрын
Glad you liked it!
@toosas7 ай бұрын
omg that filter yank got me, I loled
@Renfotzer2 ай бұрын
That transparent extruder part looks amazing! Where did you get it?
@lccraftloft-crafter Жыл бұрын
This video really helped! Thank you!
@xxbunnyboy20643 ай бұрын
I liked and sub honestly amazing video amazing quality really happy I found u only note I'd like is to add those book marks or searchable breaks in the video for each step so I could easily skip the lidar stuff
@dockerbeat3 ай бұрын
1:37 1.Использовать нужно ткань, а не бумагу, от бумаги пыль. 2. Использовать перчатки латекс или другие медицинские одноразовые, чтобы жир не оставлять, на деталях и филаменте.
@Nastynik915 ай бұрын
Im actually waiting for a p1s combo to come in, got tired of all the headache i got from the anycubic kobra 2
@kerplunk388802 ай бұрын
Newbie mistake. Never use paper towels to clean the lead screws. Paper towels shed and this is horrible for the performance of the printer. Use a lint free microfiber.
@PeterAgostiniJdcap2627 күн бұрын
Great tips Jim I just got my x1 carbon how many months do you wait to change the parts Wiper Cutter Carbon filter ? Also how do clean behind the rear lead screw if poop gets in there ? Ty
@NeonDreams78 ай бұрын
hahaha. I got a new X1C and I didn't know it had a carbon filter until you got to that part. Somehow, it's not in the startup documentation or on the wiki startup to note its even there. Thanks for sharing
@mlosuno4029 ай бұрын
If you do a lot of multi color prints make sure to check the PTFE tubes inside the AMS! I couldn’t figure out why mine kept jamming until I looked inside and realized the PTFE tube had completely worn through.
@faufaufau9 ай бұрын
are you using abrasive material? because from what i've hear, the ams isn't supposed to be used with abrasive materials.
@Schlumpi-qv9bv Жыл бұрын
Please hold fanweehl. When it Turn it Starts to make some voltage and can destroy Parts of your Board. Very nice Video i like your Channel 👍👍👍 sorry for my Bad english Greatings from Germany 👋
@AdrianAmbroszkiewicz7 ай бұрын
Hello. I have 1 question about Bambu Studios - maybe you will be able to help me. I was trying to add a simple, plain circle to Bambu Studios to print a coin but in bugger size (10cm diameter). And when I upload the .svg file to Slicer I can see that the edge of the coin is not fully rounded - you can see the small walls that make up the circle. I tried uploading few different circle .svg files that are 100% circles and in Bambiu Slicer the walls & small edges appear. The question is: Is this normal that the Slicer shows these walls and not fully plain edge of the circle - but it will print it as a plain circle? Or should I do some editing within the slicer to make it disappear? Sorry to ask, my printer will come in a month from now and Im already trying to get some first models done and learn some about Bambu Slicer. Thank you in advance and Happy New Year! :)
@TheEdgeofTech7 ай бұрын
To be honest, I've never added a SVG to the slicer and try to print it. Also I'm terrible at modeling lol If you don't use a modeling software already, you could try tinkercad. This might help with your designs. kzbin.info/www/bejne/mIe0c413p66naZYsi=f7JGvCspMebdLJO6
@Gert-DK Жыл бұрын
You forgot the most important thing, in my opinion. Check the tubes, all the tubes. They do wear down and guess where all the debris and dust ends. X1 is known for clogging and I am pretty sure PTFE dust and debris is a bad thing. There are examples, that the filament has completely worn through the tube. Bambu recommend check after each 10 kg or 5 kg if you use abrasive filament. If you suddenly get under extrusion, check your tubes and replace if necessary. Bambu Wiki has a good guide howto. TIP: Using compressed air is always, the first thing you do during maintenance. Just cleaned and oiled, no reason to blow dust to the oily things.
@ankursadhoo Жыл бұрын
Thank you for this! ❤
@davegeiger1964 Жыл бұрын
Hey Jim I also live in the Milwaukee area and have a X1-C. Would you ever consider doing some in person training? This is my first printer and I have a learned a lot with it but I feel like there’s a lot a could do to make my prints even better. It would be awesome to get some pointers and tips from someone who has experience.
@TheEdgeofTech Жыл бұрын
👋 Hey Dave! Shoot me an email and we can chat! Go Bucks!
@tjans1979 Жыл бұрын
@@TheEdgeofTech you're in Milwaukee? Me too!
@jasonconstant4555 ай бұрын
Thanks!
@TheEdgeofTech5 ай бұрын
Thank you so much!
@UncleJessy Жыл бұрын
The filament wiper is the bane of my printer 😂🤣 there are 3D printable replacements on printables
@TheEdgeofTech Жыл бұрын
HAHA I wonder what causes it's issues? This was the first time I swapped mine since getting this machine in MAY! lol
@chuckmccollim Жыл бұрын
Great video!
@TheEdgeofTech Жыл бұрын
Glad you enjoyed it!
@dakonx70494 ай бұрын
Bruh gave all the possible tips yet he’s got the nastiest filament cutter lever ever😂 jokes aside, thanks Jimmy boy💪
@3DPUK-TECH-CHANNEL Жыл бұрын
Top work Jim
@boboscurse41306 ай бұрын
Bambu says if you use IPA on the carbon rods you need to follow it up with grease. And what about checking belt tension? My prints have been horrible lately. People say my belts could be loose but I have no clue what to do.
@tooby77 Жыл бұрын
Perfect video. Tnx
@TheEdgeofTech Жыл бұрын
Thanks!
@kristapsberzins38676 ай бұрын
Is it only my or P1S does not have self test after the initial setup? I can only calibrate and that takes 26 minutes. Thank you for the video!
@raphen905 ай бұрын
Where can i get that transparent extruder?
@Taematoe4 ай бұрын
I haven't done any of this and my p1p has been perfect for a year now. Well I greased the rods once. Guess it's time huh.
@jonahhuff33555 ай бұрын
you're awesome dude! thanks!
@UbberMapper Жыл бұрын
When the 4 screws are loosed, should the carriage be able to move front to back and side to side easily? My only wants to move diagonally and requires significant effort to push it sideways for front to back.
@mamoshimiloni95596 ай бұрын
I got the one with the smaller screen is it possible to change it to the bigger touch screen? Please help me everytime I try to print it goes all throthe calibration fase. is that nessesery all the time!? if not how can I get it to calibrat once and be fri of it the rest of the day.....? Thank you
@echo-hotel Жыл бұрын
Are you sure ipa is safe on the lens? It’s common to have coatings on them, which will turn foggy and ruin the lens.
@TheBlackDove7 ай бұрын
You’re right. But those who don’t know, teach.. 😂
@ChefDansHookah Жыл бұрын
Great info. Thank you! If possible - if your P1P or X1/C needs a manual bed levelling in the future, please make a video - it would be VERY helpful. Keep up the great info!
@nerdyvikingz8603 Жыл бұрын
No its 100% auto.
@dakotareid156610 ай бұрын
@@nerdyvikingz8603there is a manual level option tho
@TheBlkbeltkid177 ай бұрын
What is that beautiful green filament you have there in your AMS I am in love 😍
@trentvlak Жыл бұрын
"pull the cutter off like this" drops it.
@TheEdgeofTech Жыл бұрын
🤣
@gsdtdeaux77 ай бұрын
Did i miss something or did he not say what the 2 screws in the back actually did? Im assuming they are the tensioners
@alecubudulecu3 ай бұрын
Note on “loosening the back screws”. Be aware this ruins your XY axis precision. The idlers buckle when loose and you’ll find the cable pulley is no longer centered. This will cause banding.
@ParkerEversman3 ай бұрын
how do you take display screen back off without breaking it
@reprinted3D Жыл бұрын
You left out one thing, especially if printing with ABS: Use some glass cleaner on the inside of the door and the underside of the glass top. The gasses from ABS will attract dust and grime and fog them up if not cleaned -- just like what you get on the inside of your car's windshield.
@TheEdgeofTech Жыл бұрын
Good point!! I was going off their guide, so they probably should add that too! I appreciate the feedback!
@TheBlackDove7 ай бұрын
Fans should not be allowed to be spinning when air cleaned. Electrical Back Voltage: In some fans, particularly in computers, spinning the blades can generate electricity (back EMF). This unintended voltage can potentially damage the fan’s motor or the electronic components it’s connected to.
@subseauk Жыл бұрын
Good video Jim. Wouldn't it be better to do the blow cleaning first before the rods etc???
@TheEdgeofTech Жыл бұрын
You could for sure! If your fans are really dirty, the go that route! haha
@jona73669 ай бұрын
Can make a video how to do manual bed leveling using the knobs below the hotbed? Somehow mine came out of adjustment it seems after my third print. I have a ticket in to Bambu, but I can't print anything on my new printer! :(
@GantryG Жыл бұрын
Thanks! 😀👍
@lastlight05 Жыл бұрын
Do you have a video addressing AMS maintenance, like how to check if your PTFE tubes are about to explode or not?
@imagineengine11 ай бұрын
great video but as for the lead screws I will be using white lithium grease and a microfiber towel. The white lithium grease I have is made by Lucas, which is a well known brand in the automotive lube world. I also use it on the bed screws of my CO2 laser and it is some awesome stuff. And it stays on for a long time.
@rustyrocket65092 ай бұрын
Anyway to fix the AMS wheel
@mickmouse2258 Жыл бұрын
Excellent video! I like you make it clear you have no problem with making mistakes and poke fun at yourself about it. Good job! On the fans - I've been cleaning electronics fans for 40+ years, I always use a vacuum hose and a soft brush FIRST, then follow up with canned air with the vacuum hose nearby. MUCH less mess. Your way blows dust everywhere! Anyone who has this printer has a vacuum and a soft brush, eh? Cleaning the rails - shop / blue towels as you know, but put the towel BEHIND the rod then spray so the extra goes on the towel. ;) Small things. Again, great video that Bambu should have done. Sub'd. :)
@TheEdgeofTech Жыл бұрын
Thanks! They definitely agree about the blue shop towels, and those were linked in the description from the beginning! Beginning! The reason that I used paper towel is because I didn't have my blue shop till at the studio and I think more people have paper towel in their house. But I definitely mentioned to be very careful because it will flake off. I appreciate the feedback and agree with the vacuum as well! As you pointed out in another comment, I was following their instructions and wanted to make sure I betrayed their instructions correctly. But I agree with you 100% on the things you said! Welcome to the channel, I appreciate you being here!
@Kamikatze1082 ай бұрын
Can you use Super Lube without PTFE?
@D4RKFiB3R5 ай бұрын
So no lube on the Y access rails? I noticed some squeeky juddering noises (which I think is coming from there) when trying ludicrous speed mode. Thanks. EDIT: Just Googled "bambu lab maintenance" and got the info I need from their wiki. Thanks anyway :)
@LanceAndCarina9 ай бұрын
Soooooo what if you do remove the tensioner screws? Asking for a friend.
@duznoh9 ай бұрын
Do I have to do anything when I’m done using the printer? Like can I just turn it off after doing my last print?
@MrChucklepuff4 ай бұрын
Man how often will I have to change the timing belts because I just watched a 10 minute video on it and it looks complicated!
@canadianoperator5 ай бұрын
I could be wrong but I think when you were cleaning the micro LIDAR you may actually have been cleaning the camera lens. Yes , I said that right :) Not the chamber camera. The X1C has a camera on the bottom of the print head, as well as the micro LiDAR on the side. Again someone please correct me if that’s wrong but I’m pretty sure it’s not. :)
@teabagNBG7 ай бұрын
thanks will do mainentance tomorrow , had a few squeakings the last few days...stupid question on the p1s if u move the head or bed it only lets u do one step.. is there a way to do 10 steps ?
@TeslaModificationInstaller Жыл бұрын
Do you have to place the AMS on the top of the machine? Or can’t you relocate it?
@TheEdgeofTech Жыл бұрын
You can relocate it to the side or above if you want! It doesn't have to be on the top!
@MrRrleonc6899 ай бұрын
I just saw yiur extruder is clear and not black like mine, where did you get the ckear casing for this extruder?
@ironchefboyardeee10 ай бұрын
Does Bambu list a spec for the belt tension screw torque? Just until they're tight and maybe a quarter turn past that is pretty vague.