#167

[@KAMiJUINs]

In this video, I did a project that I had postponed. Through that process, the Raptor, which was released four years ago, has returned as a new Raptor. And it was satisfying. 이번 비디오에서는 미뤄왔던 프로젝트를 진행해봤습니다. 그 과정을 거치면서 출시된지 4년이나 지난 랩터가 새로운 랩터로 돌아왔습니다. 그리고 만족스러웠습니다.

[@akalia_07]

This is absolute mental. Awesome build as always.

[@KAMiJUINs]

Thank you~ :)

[@godfriedm9991]

looks like you owned the road. No car almost 🤗

[@KAMiJUINs]

In fact, there are many shots taken after cars pass by for safety. lol~ Thank you for watching :)

[@DrewElia]

what a beautiful deck indeed! 10s4p is also a perfect set up for a cruiser with some great power and range! loved this video my man!

[@KAMiJUINs]

HaHa, Brother :) Thanks as always~ Yeah, so when designing a board, it is very important to use a battery with a high discharge rate and an ESC that can output it well.

[@DrewElia]

@@KAMiJUINs the foc box came with it?

[@KAMiJUINs]

Yeah, It was originally fitted.

[@worachart111]

Wow and without griptape looks so clean!!😀

[@KAMiJUINs]

Yeah, The deck was beautiful~

[@fjouper]

Nice build. Might have to do the same to my raptor 2.1. What trucks did you get? And where did you order from? Can you please write done your new parts? That would be much appreciated. Whats your new range btw and is that stock battery or have you upgraded that too? /Fred

[@KAMiJUINs]

I used the stock battery and stock ESC as it is. Only the truck and motor have been changed, and the total range has decreased slightly from before, but the power performance feels slightly more powerful. Truck - flipsky.net/collections/trucks/products/15-2-inches-double-kingpin-trucks-for-diy-electric-skateboard-longboard-esk8 Motor - flipsky.net/collections/e-skateboard/products/flipsky-sensored-brushless-dc-motor-battle-hardened-6368-190kv-2700w-for-electric-skateboard You should also prepare a wheel pulleys and belts that fits it.

[@macncheez1212]

That looks like a fun build. I like how thin the battery pack is. I think battery packs are getting to large. Due to increased voltage requirements and 21700s. Great rebuild. Another great video.

[@KAMiJUINs]

Thanks~ :)

[@eBoard3R]

⚡🤙🏼 *Dr Frankenstein, this is a Monster board!* 🤙🏼⚡ I don't like super corse grip tape either. Looks like it's more fun to skate!

[@KAMiJUINs]

Haha, Bro :) Please call me Dr. KAMikenstein. lol I am happy to be able to use different types of wheels on it. So I can ride it more often.~

[@eBoard3R]

@@KAMiJUINs I hope we see more of it!!

[@jayanderson5823]

man what an amazing build, I just love the vibe of the videos and I love that you keep the naked deck I do wonder if there's a way to build a board that can ride on a snowy day (like a car with winter tires)

[@KAMiJUINs]

I think we can make it with a four-wheel drive system. And there are already several people on KZbin who have done it in their own way. But I don't want to ride on a snowy day here. Calcium chloride will corrode the board. ㅜ..ㅜ'

[@godfriedm9991]

Salt and sand on the snowy surface is one of my worries, too.

[@jayanderson5823]

@@KAMiJUINs Ah I see...yeah that's some bad stuff for any board...

[@신베-k4f]

랩터를 개조하니까 완전 다른 보드가 되었네요. 데크의 까만색 나무결 때문인가 상당히 색달라보이네요

[@KAMiJUINs]

네, 보드하나 살렸어요. 저도 랩터데크가 이렇게 이쁜지 4년만에 알았어요 ㅋ

[@ksm4470]

항상 잘보고있습니다

[@KAMiJUINs]

네~ 시청 감사합니다 :)

[@Racule]

으아 한국은 지금 저렇게 타면 추워 죽을꺼같던데 ㅋㅋㅋ 안추우신가요? ㅋㅋㅋ

[@KAMiJUINs]

X..나.. 춥..습..니..다.. ㅜ..ㅜ 시청감사합니다~ :)

[@Racule]

@@KAMiJUINs 여긴 영상10도는 넘어가도 전 추워서 얼굴에 스키용마스크 끼고 다니는데 마스크가 끝인가 보고 얼굴이 얼어버릴듯 이라고 생각했네요 ㅋㅋ

[@hello22361]

랩터... 참 좋은 보드였죠!! 저도 구매하고 싶었던 것인데 당시엔 이미 이볼브가 있어서ㅠㅠ 1:20 하부 실링 고무가 두께부터 크기까지 엄청나네요 저런 실링은 처음 봤습니다ㅋㅋ 온스라도 그렇게 고무 실링으로 자랑하더니 랩터하고는 비교도 안되네요. 10s임에도 영상으로도 토크와 가속력이 크게 느껴집니다. 데크의 색상, 형태가 정말 예쁘고 만드신 구동계들과도 조화가 정말 좋아보입니다. 저도 얼른 아틀라스 프로 개시해야하는데 추워서 엄두가 안나네요. 내일은 제법 따뜻해진다니 시도해봐야겠습니다ㅋㅋ 이번 영상 역시 잘보았습니다! 아 혹시 DIY를 위해 VESC 프로그램 사용법을 올려주실 수 있으신지 궁금합니다~

[@KAMiJUINs]

네,~ 가능할때 고려해보겠습니다~ 새 보드 안전하게 개시 하시구요~

[@hello22361]

@@KAMiJUINs 감사합니다😁😁😁

[@Acherus1432]

Great board surgery Kami! Was wondering what belt covers you use on the Flipsky trucks, I noticed you had one on the left side at 9:27

[@KAMiJUINs]

Actually, I only used one side because there was something left. And I don't remember where it came from. Sorry bro ㅜ..ㅡ' And thank you for watching ~

[@jonsf]

Thank you for your videos! They are super nice, well made, and informative!! I want to go back to Korea to ride my board but I am unsure of the rules/laws with boards, not sure if it is better to try to bring a board from America (not sure about battery on planes) or ship them, or order a new one in Korea?? Do you usually buy boards in Korea or import? Is it expensive? Are there any weird rules? And where are good places to ride? :D I hope to ride together!! 한국에 다시가면 e보드 하고싶은데 아땋게 하는지 잘 모르겠읍니다~ 전자칠판에 관한 법이 있나요? 한국에서 사면 비싸요? 어디서 허기 좋아요? 감사합니다!!! ㅎㅎ

[@africans1968]

Did you upgrade the VESC to the latest version? Nice rebuild! ❤

[@KAMiJUINs]

No, my Raptor was the last version of the model, so it was equipped with FOCBOX :)

[@nottherealmccoy4955]

Loved this! I'm amazed you didn't slip off with no grip tape, beautiful deck though! Would it be possible to swap Voyager (had my first ride on it yesterday) over to DKP from Verreal RS changing nothing else? :)

[@KAMiJUINs]

Thank you for watching :) First of all, if you use DKP, you have to make sure that the motor cables are long enough because you have to send the motor behind the truck. If this is confirmed, there will be no problem with the replacement.~

[@nottherealmccoy4955]

@@KAMiJUINs Sorry, I meant swapping front truck only & leaving rear stock!

[@rafaelinmissouri6235]

The cable management looked neat. But I would want to try something that did not use risers. The deck height could be a bit lower.

[@KAMiJUINs]

Yeah, you could do that.~ Thank you for watching as always, Brother~ :)

[@randyvalencia1631]

Casey Niestat shoulb buy skateboard from you bro! Great wokr!

[@KAMiJUINs]

Thank you for saying that and watching :)

[@xpolentaedgex]

i have a boosted board mini s that I replaced the stock ESC for a VESC. it is a totally another board

[@KAMiJUINs]

Yeah, I can get what you feel~ :)

[@Rovettod]

Great video. I love this board but the skins always crack and peel off. Does anyone know where I could find a replacement BMS for the Raptor 2.1?

[@da420burna]

Question What spacers did you use for the motor mounts to the truck?

[@KAMiJUINs]

flipsky.net/collections/trucks/products/15-2-inches-double-kingpin-trucks-for-diy-electric-skateboard-longboard-esk8 check this link out

[@da420burna]

@@KAMiJUINs you used M5 stand-off threaded expansion on the motor mount housing, giving about 7 mm gap between the motor mount and the truck mount. Can we see the size and width of the screws?

[@KAMiJUINs]

Oh, I see what you mean. In my video #215, I installed them with more improvements. For reference, the specification of the improved spacer nuts are 12mm long and for M5 volts. Please refer to my video no. 215

[@ujung5683]

Nice video☃️🛹kami 🐶🧡so cute

[@KAMiJUINs]

Thank you for watching as always~ :)

[@MadDonJuan]

My Question is, Where did you get a brand new Raptor from? Hahahaha

[@KAMiJUINs]

HaHa, That's a good point lol ~ Thank you for watching as always :)

[@jeanprofite8339]

👍

[@KAMiJUINs]

Thank you for watching ~ :)

[@gregorypatzelt6964]

I have a raptor 2 that won't charge and it has a new battery. It's frustrating bc they went out of business if I'm not mistaken.

[@KAMiJUINs]

I think so too... But the board itself was good... I wonder what it would be like if they didn't screw up.

[@timmeey6902]

I have just repaired one of those BMS in my raptor, I changed the two SMC balancing chips only, it's a pretty simple BMS and cost NZ$7

[@rafaelinmissouri6235]

So you kept the remote huh?!?

[@KAMiJUINs]

I thought about replacing the remote control too, but I don't see the speedometer when riding, so I just used it.~

[@RandollChiu]

No griptape? Generally speaking, when more powered, your feet want more friction. 🤔

[@KAMiJUINs]

Hi, friend :) Just wearing VANS is enough for me. lol~

[@АлександрОбручев-о7г]

Привет из России😁

[@KAMiJUINs]

Спасибо за просмотр :)

[@АлексейБах-п9ь]

1

[@KAMiJUINs]

Congratulations~

[@SRNAR8]

I mean comparing 4yr old hub motors to new belt motors if kinda unfair, use new electric scooter hub motors and that would smoke any 63 or 70mm wide belt motor for the same price.

[@KAMiJUINs]

As I said at the beginning of the video, I decided to do this project because I wanted to use different types of wheels.

[@SRNAR8]

@@KAMiJUINs ohh, towards the end of the vid I was looking at the spec sheet that's why; you could try cloudwheels slip ons and meepo slip-ons for hub motors too.