$190 Amazon 4-Stroke Bicycle Engine Kit Install/First Ride NNKH

[@mrpartridge8765]

A 139QMB carb for a 49cc gy6 really wakes up that little motor. i upped the jet to a #80 and it has so much power the clutch slips even at high speeds. the bfg upgraded clutch solved that problem and I can go up hills with no trouble. my motor is on a schwinn scooter so there is no pedal assist. I cut the muffler off the pipe and welded on a briggs 8hp sausage mufffer and that made even more power.

[@puttz2]

Where do you find the upgraded clutch?

[@christopherjacquez8605]

@@puttz2 right I wanna know lol

[@williamhaskellhaskell3162]

Hi did you use the larger jet on the stock carb?

[@AnthraxBird]

@@williamhaskellhaskell3162 He said he used a 139QMB carb off of a 49cc GY6 engine.

[@cardboardorigami]

Share a video!!

[@simms196]

I had a similar bike engine kit, was a 49cc 4 stroke with 4g belt transmission totally silent. I rode for 3 years to & from work every day was awesome. Throughout that time I added a sick bike parts jack shaft & eliminated the spoke sprocket which gave me 7 gears. Also added lights mirror front shocks leather seat. Absolutely had a a great time & everyday was an adventure. Thanks for this video 👍

[@daredevildare3641]

Did you ever have to change the belt if so where did you buy it

[@simms196]

@@daredevildare3641 I don't remember ever changing the transmission belt. But the chains were somewhat high maintenance & only a problem if not lubed or worn out & stretched to the point of coming off the sprockets that's when they get kinked & better to just replace every few thousand miles.

[@daredevildare3641]

@@simms196 how fast did yours go I am wanting to buy one to go to fishing spots and just ride on back roads did you ever have any serious problems or anything I seen some things of peoples engines locking up but I feel like it was probably lack of maintenance on their part

[@simms196]

@@daredevildare3641 Mine went around 27mph

[@JABRONIANGELOR]

how much was the fuel economy and how much did it cost in general the bike + the kit ? @@simms196

[@BEEBEE159]

Great video. You did a really good job explaining everything. I'm 50 yrs old; and I'm thinking to get one of these. I refuse to grow old, still a kid inside. lol

[@NoNonsenseKnowHow]

Thanks Jason I appreciate the kind feedback. And that's awesome! I hope to be the same way when I'm 50. Good luck on it! Put it on a nice cruiser bike

[@mmark8394]

I'm 69 and just ordered One $180 aud , too scared to ride my road bike on aussie roads , a mental exercise, a slower intro to touring

[@derekpirie9188]

The primary reduction drive is chain and is a 3-1 and is for the Pit and Pocket bikes on small wheels. Ideal is a 6-1 reduction like the T-belt ones. If you can fit a 56t rear sprocket, this should bring the ratio close to where it should be and ease the clutch and pedaling on hills. I have a 39cc OHV 4st engine outboard LHS by the rear wheel. it is a geared reduction of 6-1 and till have a 48t sprocket due to the engine size.

[@Syoudous]

This is so cool and I never thought at all of this! You're a real troublemaker towards other people. Sweet idea and setup! Love this so much!

[@NoNonsenseKnowHow]

On Amazon: *4-STROKE BICYCLE ENGINE KIT: amzn.to/3xvL9RB *ANBULL KIT I GOT: amzn.to/2VCb0do *2-STROKE KIT: amzn.to/2Vqm0uT ~Project Farm's Install Video: kzbin.info/www/bejne/eXu5ZYehrbiZhKM ~1st LONG RIDE ON THIS BIKE: kzbin.info/www/bejne/sIaZfausq7GYaqM

[@patiencebristol8147]

after I had my whole back wheel fall apart in the middle of a huge busy intersection I'll never use a rag joint sprocket again. I like the cnc sprockets that clamp on the hub. It's worth the extra $50

[@NoNonsenseKnowHow]

Wow what, yeah I could see that happening. Definitely not a great design

[@tytraulich4987]

Until that backs out cuz of loose screws. Find a free wheel with 12 gauge spokes and use a front brake maybe a drum

[@drmachinewerke1]

Why not just install on a back rack

[@hemansteve]

Love these small engine jobs you can do with a bucket of odd tools. Great video.

[@NoNonsenseKnowHow]

?

[@REPORODGE]

@@NoNonsenseKnowHow where did you put the small fuel filter?

[@zackhillyard4497]

@@NoNonsenseKnowHow what kind of bike is that I have the moter but my frame is too small I am trying to find one with a bigger frame hole. Loved the video

[@NoNonsenseKnowHow]

Just an older mountain bike that I found at the flea market cheap. It's a large frame. I believe 21 in

[@cliffmaxfield176]

Great Video. My 2 cents scrap the rubber floppy disc grommet and chain tensioner. Upgrade first build. Two biggest headaches are gone.

[@antso9817]

new favorite channel , you should t up with VGG, aka Vice Grip Garage , pretty sure both you and partners will hit it off! love from NZ

[@pitapitabread]

i've learned to also tighten all the screws, nuts and bolts that i can get to on, in and under the engine before i start it

[@cstott621]

you got me laughing at yeah this thing feels like a death trap, but lets take off the governor.

[@NoNonsenseKnowHow]

Haha yeah I suppose contradicting actions. Grabbing helmet one second taking governor off other second

[@mr.a5117]

@@NoNonsenseKnowHow think it would be better with fatter tires

[@BigChungus-no1ve]

@@mr.a5117 Maybe cruiser tires.

[@heavystarch100]

Safer than a 2 stroke. Got the same Huasheng motor. Never pedaled mine once. Something aint right. I weigh 279 with a 44 tooth sprocket

[@label1877]

@@mr.a5117 Fatter tires would add rolling resistance. add weight and reduce speed.

[@tomv5988]

Thought about buying on the install seemed to go smoothly. Guess it comes down to which bike is best for the kit. 4 stroke is probably best I mean straight gas right? no mixing with the oil or breaking it in?

[@DavidHolmgren-vg7yz]

I just installed the same engine on my bike and your video was a great help. Thank you very much.

[@NoNonsenseKnowHow]

Glad it helped

[@bigrocc3925]

get a small electric leaf blower and rig it to the air intake, you will hit 45+ for sure if that little head doesnt blow lol

[@NoNonsenseKnowHow]

Hah a yeah that sounds fun, but I don't think I trust the bicycle at 45 mph

[@BuildBreakFix]

The clutch in these need love out of the box. If you pull the whole Trans unit off you will hear it ping even now when you turn it I bet lol! I hear where the bell is pushed in they leave tons a casting crap and such in the hole. Clean it out un-crap up the bearings in it. Like everything made from the finest Chinesium! BTW! I love your crank removal approach! I would of used bigger hammer though LOL!

[@NoNonsenseKnowHow]

Thanks for the tips. Yeah I took the clutch off in the second video. Think I'm going to hone it out a little bit and check for straightness

[@johnmurphy9688]

loving these videos. what a great channel.Always a new project going on. Think I'm addicted now. 👍🇮🇪🇺🇸

[@gta5grindzxb145]

The belt drive transmission for these engines is very torquey. The one I had would almost pull up the front wheel.

[@Levers103]

Where do you find the belt drive transmission? Hyperlink?

[@DEEQCODM]

😂😂👌

[@jasperdomacena6491]

it needs a bigger sprocket so it can go up a slight incline without problems, and it can still probably hit 35mph but a much higher rpm. In the Country side of the Philippines a 125cc motorcycle with a cargo sidecar can literally carry ¾ of a ton of stuff up a steep hill with just a modification with the final drive ratio

[@NoNonsenseKnowHow]

Yeah I agree. This rocket the kid came with much too small

[@theoldmanreed8818]

Is your wife girl friend that heavy?

[@johnbaker3817]

A good ride is a river Levi It goes on forever and so does the scenery in the beauty

[@gregstaton128]

My brother put a 3 hp Briggs&Stratton on a bicycle 50 years ago....2 rear rims welded together for a belt drive set up.

[@gringoanon4550]

I bought a pair of saddlebags off of eBay, and used it on my small motorbike, but I thought that it would cover the motor on one of these as well, as I have just finished putting one of the two-stroke models on my mountain bike you just cut a hole in the saddle bag and it fits tightly over the petrol cap, then when the cap is on it locks the bag down and should hide the motor. They were pannier bags I think and cost around five bucks.

[@XfireKeenmike]

Disguise the gas tank to look like a tool bag with backpack fabric. Plastic sheet like a racing number decal to cover the engine.

[@NoNonsenseKnowHow]

Good ideas!

[@umamifan]

Where I live the cops won't care much. In fact trying to cover it up would look more suspicious lol and unless you can suppress the sound a lot they will hear it and think something's up regardless

[@mmark8394]

What about a rear luggage Rack with the tank in a bag With an extra exhaust Restrictor or baffle,knobs around here are labelled Dui, potheads or going Fast to evade someone =frantic noise , attracting unfair interest, go undercover don't speed in built up areas, good luck

[@Warbeast5593]

Getting the wheels balance will help with the violent vibrations

[@BeerkegGarage]

Project farm is my boy lol love his vids also. Thanks for the video

[@oldgrizzlygamer]

I've always wondered what it would be like if you could install this with a 3 speed hub.

[@mikesbarn1858]

If you look inside the ports you’ll see a skirt blocking 1/4 of them. I dremelled it to a ramp. I also jetted the carb and put a breather on the valve cover. Then I sealed the crankcase breather hole. Mine was governed by the size of the carburetor.

[@NoNonsenseKnowHow]

Did you notice a power increase? Honestly I don't really want this thing to be any more powerful or faster. I enjoyed the fact that it is mild and gets incredible feel mileage

[@mikesbarn1858]

I answer to your question my top speed is 36 after mods. We are flat with virtually no hills.

[@BEEBEE159]

Put a basket on the back of the bike, and mount the fuel tank inside the basket, to hide it. The fuel tank will be concealed by the things you put in the basket.

[@NoNonsenseKnowHow]

That's a good idea!

[@abrokendowncar]

Except anyone can see the engine

[@theoldmanreed8818]

Mount the engine in the basket on the rear in the basket and use a 2 or 3 horse power briggs use screen for breathing holes and run exhaust out the bottom. Put fuel tank in front of handle bars.

[@theoldmanreed8818]

Tell the cop you dont entertain suspicions

[@FranciscoRamirez-ql6et]

I got a 2 stroke it took a while to get it going to get it right. First it’s chain then the guide but made chain really short. Did some adjustments. Runs like a champ

[@loganm.5068]

What's the purpose of changing the front sprocket? And is it possible to leave your old sprockets on, disengage the clutch, and ride it like a normal bike if you run out of gas?

[@NoNonsenseKnowHow]

To be able to put the longer crank shaft in for extended pedals

[@ianburit3705]

Just another point, here In the UK these kits are Illegal to use on any Roads or paved side roads (UK LAWS) BUT, how about mounting the engines on a rear wheel carrier/ rack driving a dynamo to charge a battery feeding an electric motor that propels the cycle/ a battery propelled bicycle WITH peddles IS legal in the UK to use on Roads (highways) but lots of work - lol - just saying though as It makes a joke out of UK laws..have a great ride.

[@jeremydickman6674]

Electric kits $250. US, on ebay. Foldable solar panels, super cheap. If they made a better kit, you could get a electric front hub, electric rear hub. Could have 2/3/4 wheel drive bicycles, that charges itself while you ride.

[@datadavis]

Convolute EVERYTHING! 🤣

[@fistofthenorthstar9010]

Could you attach a generator to a electric bike ?

[@mtsky-tc6uw]

@@fistofthenorthstar9010 yes you can -i put a 750 watt on a sturdy bike rack--it really kicks up the range

[@robertjoseph5206]

I paid 150$ for my 80cc motor kit off Amazon and let me tell you it runs really good

[@cheesebeef4902]

@Robert Joseph which kit did you buy?

[@markmurrillo2028]

Hello, I love the video I’ve had motorized bicycles before but never put a kit together like you did. I had a ATV quad in the past and there was a saddle bag that fit over the gas tank that might conceal your engine if you’re going to a place with a lot of cops you can try that To cover it up.

[@Saddletramp1200]

I have several thousand miles on mine. I do build motorized bikes for a living. There fantastic.

[@PoisonShot20]

Any videos or pictures? I love to see them. Ppl concern about speed, not fast enough, it's a bicycle for crying out loud, not a motorcycle! 🤣🤣

[@Saddletramp1200]

@@PoisonShot20 I have some but they are not quality. Saddletramp1200 on youtube.

[@JTVlogs.247]

Wow mine doesn’t go as fast lol but mine is a lot of tq. Requires no pedaling even up hills. I got mine off Amazon and it’s the belt drive to chain

[@MrPolymers]

I was real close to purchasing a two stroke engine for my Bicycle. Then, my wife shot me down and suggested I pay the $550 for an ebike conversion. My first wheel was bent like a pretzel. Finally, got a good one. The advantage of the ebike. I don't worry about the cops as the thing is silent. The negative. I'm 225lbs and get about 15 miles just using throttle. Would not make a long distance tourer. I have a 143 HP Yamaha FJR for that. It is nice just to hop on and go.

[@NoNonsenseKnowHow]

Yeah the electric bikes are awesome! But definitely can't beat the range and cost effect effectiveness of the four-stroke bicycle kits

[@drrrw]

Would it be better for the hub at the back to be a modern disk hub for bikes and machine a sprocket big enough to sit on the disk brake holes to make it a better built sprocket? Maybe alignment issues would occur. Also your rockhopper looks the part.

[@arksrandom5968]

The issue with a rear brake disc is the little amount of space you have available to actually put one in, if you DO however have enough space then you need a sprocket adapter for the rear wheel hub and then a disc brake adapter that can be bolted onto the sprocket itself

[@niteshades_promise]

It's way better to use 6 bolt disc hubs. Sprocket+spacer+ disc=zero headaches. Don't forget loctite. 5 years zero issues.🍻

[@DirtBike101]

I got the same kit 3months ago…… works well hard to setup unfortunately I got my finger right in the chain and chopped 😅 my finger off and got surgery other than that be careful with it lots of fun 😂

[@M.TTT.]

Dayum!

[@donaldhunt4]

Another awesome video! Now I know how a centrifical clutch works, thank you very much!

[@psilver063]

You mean you need to build it like it was designed wow!!!! Mind blowing 😮

[@NoNonsenseKnowHow]

Yeah pretty neat eh!!! 😎

[@utsaar]

Is there an updated link for the kit? Amazon page is down.

[@dgb56bgd]

CUTE. I’m a 66 YO AMERICAN, living in China…since 2005. I’m often AMAZED by some of their cool designs…but QUALITY IS ALWAYS QUESTIONABLE….which is why I originally came here. I’m a multi-layered Engineer, specializing in product development, manufacturing and quality assurance. They have a wide variety of MINI-EV designs (3 wheeled and 4 wheeled) that should be more widely available and used in the USA. Sounds like something I might undertake myself…MADE IN USA. Blessings

[@austinkirkman5788]

I have one of these and I have to help it pedal up minimal inclines. I’m lucky to get 15 mph on level ground at WOT. Transmission issue maybe?

[@davidhitchcock9340]

Put an e-bike sticker on a make shift fleece or felt with resin... easy to stretch and shape....

[@NoNonsenseKnowHow]

Lol and yeah when I get pulled over I'll just point to the evike e bike and be like look it's an e bike

[@tysonkonken6184]

That part where you yelled "Pretty quiet with no muffler"... hilarious! 🤣🤣

[@theoldmanreed8818]

But true it was quiet

[@ianmangham4570]

I love it ,just something so fun about bicycles with little motors/engines 🤟🤠🙏💯 let the fun begin 😀

[@tysonkonken6184]

BTW, you never use lock washers with unlock nuts.

[@NoNonsenseKnowHow]

why

[@KeaganLegit]

40 mph honestly sounds amazing, I'm gonna order a kit tomorrow and get the bike next paycheck

[@NoNonsenseKnowHow]

Definitely pretty amazing! But be careful. Pretty sketchy on a bicycle going that fast

[@KeaganLegit]

@@NoNonsenseKnowHow will do! Gonna get all the necessary protection too

[@blackhd92]

@@NoNonsenseKnowHow38 mph Downhill. Your thumbnail is just Clickbait ,let’s not get it twisted.

[@kurtvanluven9351]

I prefer my 2 strokes. I expect to hit 60 on my 2 speed Puch build. But 38 is ok for the Chinese kits.

[@larryshaver3568]

Could a larger sprocket be put on the clutch? i think that might help

[@nb3channel]

You should be able to start from rest by just twisting the throttle without pedaling. Also it should be able to handle hills without pedaling as well. I can see what you are missing is the choke switch, which is the white plastic that you didn't touch at all, and is left at the closed position all the while, that's why you're not getting enough power. You are supposed to close it when cold-starting the engine, and then open when it's already running, where the bike can be operated like a regular scooter. With the choke operational and you still have the same issues, then your centrifugal clutch is faulty.

[@theoldmanreed8818]

You are a genius

[@conker33350]

Looks like you could have slapped a bigger motor on that probably would have made it easier to take off without pedaling. But this is still very cool. Nice video.

[@Hunting_Grt_whiteNorth]

I saw some unusual bicycle fairing kits that might suit your purposes. Ever consider 2x motors on a 3wheel or tadpole recumbent bicycle?

[@dronepilot260rc]

I just got done ripping around on my 4 stroke build and it does 40+ mph couldn’t get my crankshaft to work so I’m just motor power only and it runs my 290# self around just fine 😅

[@IdahoEagle77]

So with the sprocket and the wheel not spinning perfectly straight and being a little wobbly, did you ever have any issues with that? While riding?

[@craigmonteforte1478]

I guess all in all it’s impressive that out of the box it worked without major Fabricating of custom parts ! You should install a set of Handle bars turned upside down like they used to do on the old Race Motorbikes

[@NBC_NCO]

Is it possible to hook it up so you can change gears like you can normally on a foot operated 10 speed or 12 speed ?

[@IPCRo]

Maybe weld the casete and turn the wheel

[@thesupremecmo1622]

You should get a sprocket hub adapter for it would be A lot easier nine bolts could be a real pain

[@NoNonsenseKnowHow]

Yeah I was briefly looking into those. The bolts are definitely time consuming but it works good. Unless you have to swap outs brackets

[@IdahoEagle77]

Is it really true that you have to pedal to get this bike going with this 4-stroke engine, or else you will burn out the centrifugal clutch? I’ve seen numerous videos where people don’t pedal at all with these on bikes.

[@NoNonsenseKnowHow]

They probably have different gearing or don't weigh as much

[@wompstopm123]

i had 2 of those chonda engines the 1st one came with a bigger torque converter and would go about 25 mph max speed and would take off quickly, the 2nd had the small torque box shown in this video and topped out at 20 mph and would take a long time to accelerate

[@drewsey5733]

I’ve got one that will do 20 comfortably. Got a tach turns out that’s about 4500 ish rpm. I don’t like running it faster than that because it starts vibrating like a mf. I have a new rear sprocket coming thats way way smaller. A 28 tooth sprocket to be exact. So we’ll see how that goes.

[@boasandbitches1522]

My cast iron mounting plates broke twice, I would recommend a different mount instead

[@theoldmanreed8818]

Mount it on front handle bars

[@microbiologie2196]

I have the same one with pad brakes like yours, but the braking isn't great when you're going at 30 km/h. do you have this problem?

[@martinlicht1969]

Maybe having a belt primary with a CVT style transmission would make for smoother operation through the rpm range. Might get you up the hills too! Last thing I want to do, is pedal a bike with a motor on it uphill.

[@kjohns1413]

Do you know of one by chance? I’ve never seen one for the two stroke or 4 stroke kits but would be awesome.

[@USA__2023]

@@kjohns1413 pretty sure they sell the 4 strokes with torque converters on ebay.

[@michaelcampbell9457]

Might be a little labor intensive but I was thinking of creating a custom faring to cover the motor by cutting up a plastic barrel or something similar. Possibly a used faring from a motorcycle salvage yard could be easier.

[@NoNonsenseKnowHow]

That would be awesome!

[@zanegrey8196]

with a ross pedal crank free wheel you could put the sprocket on the pedal crank and have gears...

[@darkhorse2reign]

super cool build. I'm a tinkerer and want to learn more about ICE. The ''death trap'' feel is likely from frame flex and that ''CHORK" Chinese front fork...super nasty build quality on that fork. Give some consideration to a SOLID steel high quality bike and transplant the engine.

[@warrenlilje9441]

Could it be flipped the other way so the exhaust is to the rear, and geared so the drive sprocket rotates in the correct direction, that way it could be driven using the derailleur with multiple sprockets for climbing hills etc. and not needing to pedal? Also wouldn’t need the chain tensioner?🤔

[@LotsOfInternetTubes]

Can you still work the pedals? The left hand side looks like it protrudes all the out to the pedal.

[@NoNonsenseKnowHow]

Yeah I had no problems working the pedals. I suppose that's one of the big benefits of the smaller two-stroke engine kits though

[@michoelmushinsky922]

do these last? i had a 2 stroke kit and it kept braking and starting took alot of pedaling. would this last a year without major issues?

[@NoNonsenseKnowHow]

I couldn't tell you for sure since I haven't owned mine that long but I've read pretty good things about these engines. However the setup will certainly need tinkering over time I'm sure. The chain system is not ideal

[@pat_7267]

3000km on mine... never missed a beat...

[@desertrat1357]

Sounds like you need you carburetor cleaned

[@nikolasNetoDeOliveira]

Hey there. Great video, I have one that's already been built but it came without the pull start. Can I Start it without it and pedal. I've tried but it's not starting

[@gerardjones7881]

Install a bigger rear sprocket to lower top speed. It will make the auto clutch functional and climb hills . Mine does 24mph. Drill and pop rivet tank brackets to frame. Same with chain tensioner.

[@BEEBEE159]

What sized rear sprocket did you use; how many teeth? If it's not too much trouble, could you give me a link to the sprocket you used? Thanks.

[@mmark8394]

24inch wheel is the same But take out a few links

[@chrisgoains]

I don’t know shiitake

[@mattrhoton9219]

I think you have that backwards. a smaller rear sprocket would lower your speed but increase torque applied to the wheel.

[@gerardjones7881]

@@mattrhoton9219 nope. Smaller gear goes faster.

[@Jennie0rjellybean]

Hello do you know why my pull start too hard and do 7 and 8 time

[@NoNonsenseKnowHow]

May need some carburetor tweaking

[@The1stHomosapien]

omg i bought this 4 strok ekit, recieved it today, so happy, then i realise ive only got the engine! no other kit. just the engine. which looks all perfect.

[@NoNonsenseKnowHow]

Oh damn! Well if you got it from Amazon, luckily they're really good about customer service.

[@The1stHomosapien]

@@NoNonsenseKnowHow no its from a ebay seller. Chinese based, but they have a storage in birmingham, i think.

[@NoNonsenseKnowHow]

Oh. Well yeah eBay is another story. A lot of time they put details and fine print like includes engine only

[@barrykrajeski5598]

@@NoNonsenseKnowHow I purchased my kit at a company BikeBerry.It cost me a little more but they are great and have a lot of neat stuff.

[@theoldmanreed8818]

@@The1stHomosapien Get on down to birmingham and rattle some doors and whatnot

[@krabkrabkrab]

Bicycles and motorcycles have top speed roughly 31mph times the cube root of the horsepower, provided the gearing is such that top speed is at the RPM corresponding to peak hp. 1.4kW = 1.88hp and the cube root is 1.23. 31x1.23=38mph, so that works out.

[@xthe_moonx]

i got same motor and 38 mph wow i can only get 30-32 mph. i removed the governor thing but didnt make a difference. how can i get this thing to do 38?

[@Slenderman63323]

@@xthe_moonx you probably have a higher tooth rear sprocket which increases acceleration but reduces top speed

[@markbutler9046]

Now I thinking about a 4 stoke..since I can't find that phantom 80 big bore kit

[@NoNonsenseKnowHow]

Quiet and reliable. The way to go in my opinion

[@thaddeusgettys2726]

I also dont like those clutches, you can get a go cart clutch off amazon for like $50-$70. They are belt driven and act like an automatic transmission. Ive heard they dramatically affect the torque and top end of a 4 stroke.

[@NoNonsenseKnowHow]

Yeah they are definitely kind of junky. Is that a direct bolt on to this engine? I'll have to look in to one

[@thaddeusgettys2726]

@@NoNonsenseKnowHow They really should, some of them have to have a small part of it grinded off to fit. But a lot of them come with that part already missing.

[@hellsfirefreedomtube6984]

How’s the bike doing? Did you ever take apart that centrifugal clutch to see if it was ok?

[@Levers103]

I’m looking into buying one of these, I’m a welder fabricator so I’m not going to have any problems building the framework for it, but could a guy mount this above the rear tire as opposed to underneath the seat? I know the weight distribution will be weird, but other than that any foreseeable issues?

[@theoldmanreed8818]

Levi Koeneman. Put it on the front wheel. Move the seat back for counter balance. With your skill the sky is the limit.

[@LonnieClayton]

A jack shaft put the drive to the 5 speed shifter gives you low to high speed

[@Yardie1682]

Get a 50 tooth rear sprocket that will solve your vibration issue for the most part

[@NoNonsenseKnowHow]

I appreciate the recommendation. I kind of like the 38mph top speed right now though. I took the clutch drum off and it looks to be pretty warped. Going to try to correct that first and see how it goes

[@johngoodin3445]

It looks great. I’ve got to admit that I did a double take looking at that muffler setup. It’s the very first time I’ve seen one pointing straight down. I wish the community would share what bike apps they’re using on their phones. I tried searching Apple, all I could find were exercising apps. Are apps under Apple made for just cycles in general?

[@Mishakol1290]

Would you put this on a beach cruiser frame or a mtb?

[@marquislewis1767]

What would be the comparison kit to this in 2 stroke? 80cc? I have a few buddies with tricycles. So far 2 of them have used the 80cc bicycle kits from amazon. I would like to be different and give this a try. I just don’t want to be left behind😂. Wouldnt a 4 stroke like this be easier to repair and more upgradeable?

[@IPCRo]

Harder to repair actually and you can find basic parts, no upgrades. But it is more reliable and with a #80 or #85 jet you can even be faster than you friends. And getting more mpg.

[@DaveGesswin-hl8ht]

Hey bud I just got the kit and I got a old Schwinn it's a 70 series what I was wondering is it imperative to have the derailleur in the front because the guy that assembled it didn't seem to know what he's doing I'm ASE certified Chrysler mechanic so I know in a mechanics you know make another video or let me know where I can see the rest of your video it blew my rear bearings in my Schwinn because of the torque do you have any suggestions cuz you make videos I greatly appreciate it good job brother

[@jimdaley2256]

You looked like you were going downhill when you hit 38 mph what do you think the max would be on a flat road 30?

[@NoNonsenseKnowHow]

Yeah cruises around 30 32

[@jimdaley2256]

@@NoNonsenseKnowHow not bad for under $200 but if you put a helmet on I'm never getting it. Is it the engine or the way you set it up or was the bike a pos?

[@jeeprenegade1985]

I have a Chinese, stand up, gas scooter and the centrifugal clutch vibrates bad when taking off until it stops slipping. Maybe it's just the clutch slipping. Try taking off in a lower gear if you can.

[@Mishakol1290]

That bike frame has so much room for that motor good gosh lol

[@Moon-magic109]

Love it, thank you for sharing

[@moofdoggmike]

no nonsense skid lid! Smart!

[@carlnikolov]

any clue where to get this kit in canada? can't seem to get it off amazon really... cool video by the way

[@NoNonsenseKnowHow]

I know there's a few websites that specialize in motor bicycles. If you Google motorized bicycle kit it should pop up. And thanks

[@johncatania7712]

Could you trim your aluminum pieces, and drill n tap em for the pedals?

[@cato5630]

What kind of spark plug does this engine take??

[@alexmattyspac7605]

Your speed and hill climb issues would change with different size wheels. Maybe that is obvious. How would that perform on a smaller bike?

[@NoNonsenseKnowHow]

Yeah for sure. Or could swap out the sprockets. But then I guess you would lose that nice top speed of 38 mph down a slight decline

[@NoNonsenseKnowHow]

I think it would do awesome on a smaller bike. As long as there's enough room to fit it in there

[@JwpGaming]

How do you change the oil in one of these? Do you just suck it out through the fill hole with the syringe? I've seen some models having a drain plug underneath the fill or near the clutch, mine hasn't got either.

[@NoNonsenseKnowHow]

If there's no drain plug on yours then yes just suck it out

[@jefferybye2169]

Im surprised that the exhaust didn't flow out the back..thats weird

[@j_roq7112]

I got mine up to 32 on a beach cruiser. The clutch is junk and my throttle broke so I got rid of it.

[@NoNonsenseKnowHow]

Yeah clutch is definitely junk

[@jonny6758]

@@NoNonsenseKnowHow the chain drive clutch has these issues the springs like to break on these models try a belt drive

[@jerryanstey7058]

I DIDN'T LEARN MUCH ,BUT NICE SHOW !

[@michealfrench6488]

How do you hook up the kill switch with only one wire coming from the motor?

[@NoNonsenseKnowHow]

The other wire goes to ground on the engine. So basically any bolt on the engine

[@MoRzX3]

Just bought one 👍🏻

[@ridwanmujahid_2.020]

Him: it really can't handle hills Me: [laughs in floridian]

[@aj69420]

I left the Detroit revision of this comment when he said those pedal arms were made of steel lol