1998 Chevy K1500 Silverado TRUE DUAL EXHAUST w/ LONG TUBE HEADERS & STRAIGHT PIPES & 10” TIPS!

WANT 10 INCH EXHAUST TIPS? CLICK THE LINK BELOW!
amzn.to/37R45AA
1998 Chevy K1500 Silverado 5.7L TRUE DUAL EXHAUST w/ LONG TUBE HEADERS & STRAIGHT PIPES!
#EXHAUSTADDICTS #CHEVY#K1500 #SILVERADO #TRUEDUALS #LONGTUBEHEADERS #STRAIGHTPIPES #K2500
Comment below with your thoughts & comments!
Follow us on Instagram!
@theexhaustaddicts
Subscribe for more awesome car content!

[@rocketstutorials]

Love your enthusiasm man! Can tell you love what you do, and it makes for a successful business. Especially when the customer comes to pick up their truck with a fresh exhaust system, and you are outside hyping them up with the camera rolling! Definitely makes them feel good about their ride!!

[@gxmzifa5615]

“We’ll get y’all a cold start” and continues to rev it nice 👍🏽

[@Justin-jn5wm]

Prob didn’t even need to use the lift 😭

[@olbasshole2507]

facts😂 prob just makes it a lil easier to see in the video

[@ChiefRickyRC]

It's always nice driving something like that, because everyone moves out of the way 👍😁

[@BEAUFORTMEIGS]

This K1500 is the most badass silverado I’ve every seen in my life

[@zxJC34xz]

😂

[@pepeiann]

Lol he needs to take the cats out for it to be a real clap wagon

[@andrewwoodall9119]

I'm running 98 k1500 z71 3 door extended cab swb 5.7 vortec cats cut true duels but cut under the back passenger seat. And a 96 same thing but with cats on doing a rebuild on it then going with duels and outlaws

[@andrewwoodall9119]

@CJ Malone lol atleast no one person is going to steal my truck

[@andrewwoodall9119]

@CJ Malone because it loud enough to wake me up because it ain't got neutral. And I sleep next to a mossberg Shockwave loaded with buckshot and park the truck right near my window

[@pepeiann]

@CJ Malone what jitt we fucking be packin cause WE DONT PLAY

[@tonymontana5159]

Hey Andrew are you having any issues with the air fuel mixture after installing long tube headers

[@colbybarbour9990]

sounds interesting thought those tips would be on a diesel

[@RedHulkBuck]

Crossover pipes are X or H pipes around where the transmissions sit center just a FYI

[@groomlake51]

🤦‍♂️😂 lmao crossing the pipes SMH!!

[@ryleyjhampton]

Sweet truck definitely only needed 5” tips

[@crazycooterMN]

That trucks rap name is machine gun chevy!

[@Ares_Zelf]

Go back to 0:00 and look how close the roof is to the ceiling of the shop

[@austinlepoglow269]

Was thinkin the same thing lol

[@felicianogarcia2593]

That is a sick ass country truck right there! SWEET!

[@funguy7979]

man that grill has my attention. That is sweet. Custom I imagine.

[@marioalvarez3780]

That whole truck looks crazy 🤪

[@EricErnst]

Cross the pipes to equalize backpressure? Too early in the morning.

[@7natcho]

It was way too early for this guy lol . Rear end out of a bread truck ? Really ?? lol .

[@Midnight-yh6cb]

I think he means so that the exhaust comes out of the tail pipes at the same time, he does the cross to make the lengths of the pipes equal, not sure though.

[@EricErnst]

@@Midnight-yh6cb That makes way more sense than backpressure... if you want to see the same amount of smoke come out of the tailpipes when you're rev-bombing in a parking lot. I'd still like to see an x pipe to equalize backpressure. Use the exhaust pulses to scavenge the opposite bank. I personally run single exhaust on my full size pickup. I used a Flowmaster 3"-into-4" y pipe and welded 3" mandrel bent pipes to the front coming off of my headers. Im running a single 4" system from diamond eye performance. I need to add a muffler. She shrieks on the top end. 650hp supercharged 355 sbc.

[@markg7030]

I don't see an X- pipe or an H pipe that's the only way to equalize the pressure.

[@EricErnst]

@@markg7030 yeah, sometimes the narrator talks out of his ass. @Midnight has a point about crossing the pipes up front. It makes true duals technically about the same length instead of adding about 6 feet to the driver's side. Since both of the pipes have to go on the passenger's side to avoid the transfer case and fuel tank on the driver's side. It equalizes the length of the pipes, but not the backpressure. Unless he thinks an extra few feet of 2.5" open pipe is a restriction on 1/2 of a 350 (it's not).

[@FrequencyORD]

If he fixes that grill and fixes the paint that could be an awesome truck.

[@Spyder-nn5fw]

I would keep the beaten up parts. Looks like something a demon would drive.

[@claygoerlitz4137]

I like that grill, looks awesome

[@glennquagmire9737]

nah that’s a part if the reason we love the obs

[@noobydiablo]

Not a fan of how the collectors are welded straight to the exhaust with no flange but other than that looks good

[@butwere3-0wou]

That’s a crazy looking truck but I really like it

[@lerch400block]

I have the same year model. That sounds crazy.

[@groomlake51]

FYI a X pipe or H pipe equalizes reversion waves! The ID of pipes must be connected not just ran past each other🤦‍♂️

[@redwolfmaddox3986]

Nice truck man I have a 93

[@squarebody8269]

Hell with bringing it in on a trailer I drove my squarebody chevy with open headers 20 minutes to the exhaust shop 😂

[@sexysexyjulian6758]

What kind of Nancy would load it on a trailer? Do people really do that? I've been driving my truck all around with open headers for the past month or so just for shits and giggles really.

[@garrettrodamaker1433]

Shoulda ran 2.5" to the start of the bed, then switch to 3" the rest of the way and bend to 90s behind tires no tips either. It will sound like no other, trust me try it.

[@austinmcgriff2791]

Axles from 98 dodge 2500 dana 80 rear dana 60 front.

[@fcvids6404]

love ur vids

[@katskratchkustumz]

18yr old me would have loved that exhaust, hate it now lol

[@thebaron8783]

He'll be back to change those tips 😁🤣😂 sounds mean tho 👀

[@coltonpeare1917]

Wondering whats so funny about this truck. Its got a straight axle up front. Nice swap.

[@youngonzita508]

Love the truck keep up the great work

[@JFROMM454]

I just don’t understand the $200 in tips to be stuffed under the truck almost hidden. See it a lot in my area. Tips are supposed to be seen lol

[@trucks7384]

Sorry to say but thats an ugly set up to be honest, nice truck but the tips killed it 🤣

[@TheUndertoe]

Yep I don’t understand wtf people do that shit for

[@randomvideosyt5955]

I got 5 inch tips on my chevy Silverado thats plenty big enough . 10 inch tips just look stupid sounds good tho

[@lowccperformance4059]

So do bigger tips actually produce a louder sound?

[@randomvideosyt5955]

Yea i would say so its just a little louder

[@nolansmith571]

Nice truck? In what world is this nice? Its clapped lol

[@TalkTrash55]

Ugly truck matches the exhaust

[@johnmaines2288]

Not a fan of the tips myself but it sounds nasty. I don't get why the trucks getting hate. Respect a mans build lol

[@markswan5783]

Thanks this is my truck I like it idc what no one think

[@matthewdobson6599]

Your right plus the man said he just got sooo more for him to do

[@chevellewilson5257]

@@markswan5783 i respect it. all you have to say is... its better then a honda with pipes

[@superdad9886]

Brand of headers and cats?

[@leemuchmore2272]

How long is the 10 inch tips and inlet size

[@suburbanfreak87]

I have true Dual set up: Patriot Long Tubes to aftermarket cats to super 44s dumped 3in before rear axle and tucked all between body and frame. I don't need a cross over and the power is there throughout the rpm band with 2.25in coming from the 2in collector off the long tubes and mufflers are spaced 14ft from collector for best exhaust scavenging. It sounds good, but pretty sure customer is going for loud and raspy. Why did you guys weld the long tubes to the pipe. I can can take off my whole exhaust with ease as its just one long piece and can run just Long Tubes if I chose to. You guys could of probably done side exit exhausts on both sides before rear tires which is a setup I was actually trying to go for, but ended up just getting the dumps. Sounds good for rolling tall and loud, functionality have to question. And 10in tips are for Diesels for pete sakes.

[@gavinroberts7332]

Just put long tube headers on my 98 z71 but my oil filter is in the way. Did you have to buy an adapter or was your filter already facing that way.

[@GK-gr2mx]

Was nice till got to the ten in tips !

[@TrippyWoodStock]

What long tube headers fit the 96-98 K1500 with the 5.7 350? I need a set! Lol

[@stevenkinnison8044]

I wanna put long tubes on my 02 Suburban but don't wanna go through the hassle of possible broken manifold bolts.

[@collinwright1237]

Put them 10in tips on my 454

[@npastran90]

Any info on the lift he did ?

[@bennettsievers9830]

I had a question about long tube headers for a 1998 4x4 5.7 vortec I got hooker headers but everything I see people say they had problems what did you run into

[@BIGBENDIESEL03]

Massive tips

[@adrianmunguia7730]

What brand cats are those, part # if available? Trying do that set up on 98 two door tahoe with 5.7 v8

[@politicalnonsense9857]

Streight piped? I see cats,. Why would anyone want such an UNTUNED exhaust,? crushed bends,different length pipes, then those GOOFY CARTOON TIPS , 5'' /6'' TIPS ON TINY 2 1/2'' PIPE,. YOUR TRUCK ,SO DO AS YOU WANT , I JUST DONT UNDERSTAND IT, IS IT HELPING ANYTHING??

[@harrisonhutchins9055]

Helps how loud it is😂

[@funguy7979]

what lift kit and how high????

[@Chiefbird007]

have you ever done a exhaust on a 6.0 powerstroke?

[@chosenwon5618]

No plates on it?

[@hoodrats4717]

I'm putting long tube headers high flow cats x pipe and a super 10 on it with 3 inch piping Do you guys think it'll sound good? It's a 97 with the 5.7 vortec

[@fish_R_stinky69]

I think it'll be better without the Super 10.

[@fish_R_stinky69]

Nahhhh bro. Vortecs are quiet even with straight pipes.

[@chrisalvarez3393]

Damn was this truck touching the ceiling when it was on the lift?!!!

[@charliela1844]

how did you guys plug in 4 o2 sensors, when theres only 3 on the wiring harness? 2 each header/ ex manifold and 1 after the y pipe

[@cavalierliberty6838]

They probably split the wires and wired in another plug to make it get two results.

[@charliela1844]

@@cavalierliberty6838 😂 it doesn't work like that ... i tried

[@matthewratajczak7403]

did you catch the rona? who else thinks he sounds sick???

[@nathanmartineau3998]

Dude it don’t clap, I found my exhaust

[@marcomolina7502]

Homie said avalanche is next 😂😂

[@jadenclark7778]

Quiet for long tubes and high flows

[@kenrs3329]

is this a 350

[@draket6050]

Trucks for sale now in bg ky for 15k

[@billyray4716]

Ill give him 2000

[@fou4596]

How much is it

[@menarenotwomen]

What kind of communist puts cats on a vehicle with long tubes

[@deegan727]

People that live in communist states or at least counties that require emissions testing. Unfortunately I live in one of two counties in Indiana that does. I’ll be registering mine as a classic or show car once my built LS is in to avoid emissions but then I’m only allowed to drive 3000 miles a year I think. I have ways around that though too LOL.

[@trashbandit2449]

@@deegan727 like what?

[@AjaniJohnson]

Y’all think everything is communism 🤣🤣

[@trashbandit2449]

@@AjaniJohnson this comment was clearly a joke. Have some fun...

[@endopainss7946]

Bruh live a little it was a joke

[@adrianmunguia7730]

Part # for the long tube headers? Haha and will they fit my 98 chevy tahoe 4x4 2door?

[@73twinturbo]

Looks fun..but people do know using chains as recovery...is pretty unsafe and whack

[@ricefarmer1point6]

Why weld the piping to the headers? Should’ve put a flange...

[@pepeiann]

True but that can be fixed later

[@ragintaurusmusclemercury7023]

There might be flanges behind the bracing.

[@ricefarmer1point6]

There are no flanges under the crossmember, true it can be fixed later but why do it later...you’re there, paying money to have work done. Why can’t it be done then.

[@pepeiann]

@@ricefarmer1point6 guy getting it done obviously doesn't know

[@markswan5783]

Probably because u didn't pay for it 😂

[@austinlepoglow269]

Im really diggin the front solid axle im just not a big ifs guy. Ifs has there place it just seems like theres so many more moving parts that wear out but its all just a matter of opinion i guess anyway i like the truck

[@iminyourcloset1038]

Holy shit them tips

[@SomcallmejameS]

That's a seriously impressive build. How in fuck's name did they get a dana 60 in the front of a GMT400??

[@dannymagnum85]

Those rear leaf spring u-bolts are giving me anxiety

[@sexysexyjulian6758]

I just replaced my rear end on my obs and holy shit! My u bolts were barely intact! I could probably snap them in half by hand they were so rusted away. Strange this is, my truck is basically rust free aside from those old bolts which are no longer on the truck. But all of the sudden I was very grateful that my rear diff shit out on me hahaha because had it not I probably wouldn't have known the u bolts were that bad until my axle fell off one day!

[@chrisbowers6902]

How did yall marry up the 2.5" pipe to the inlet of the 10" tips? I'm thinking the tips inlet was atleats 5" no?

[@JFROMM454]

Likely custom made adapter

[@matthewdobson6599]

I bet that thing is gonna be a mud truck

[@billyray4716]

Highly doubt it sees anything other than the road

[@B4Dtouchmmotors]

Looks like a steers sack... 😂 Sounds like it too.

[@latemodelGM]

I’m a Chevy guy but I absolutely hate that body style for this exact reason they are always clapped out and the owners do the dumbest mods ever to them

[@latemodelGM]

@CJ Malone how am I being a snowflake almost every one of these trucks looks like absolute shit including this one

[@billyray4716]

Im proud to own an unlifted obs suburban and its not clapped the fuck out. Im gonna get more for it than any of these shit boxes once the market fixes itself

[@jordancivic96]

What in the hot and crispy, Kentucky fried fuck is up with those massive tips on a gas job?

[@DJatVRR]

"crossed them to equalize backpressure" LMFAO

[@steve05017]

Removed the tips today.grill is for sale if anyone is interested

[@steve05017]

Located in Indiana

[@BIGBENDIESEL03]

116 DB

[@justamag3052]

The tail pipes looks dope af.

[@jla7781]

Bro That Grill Is Whicked Where Can I Get That Same Grille For Mine Let Me Know Contact Me Plz

[@tristanoliva]

Crossing the pipes effects back pressure? Jesus Christ dude come on

[@tristanoliva]

@CJ Malone they aren’t even close to the same length the way he put them chief

[@talhamirza9836]

My immigrant dad watched this : Now, he's the general of the US Marine Corps

[@fryconntinumum6559]

I like more of a rumble that pop is kinda dumb

[@crosbylewis3660]

Those tips are a no for me lmao

[@rabyboy2844]

I agree. I think they should be bigger

[@benjamin9262]

Looks like a 17 year olds squatted truck in the south. The most obnoxiously loud and lifter trucks out there.

[@funguy7979]

I have a 97 1500 GMC sierra sl reg cab long bed 2wd 5speed. Would that lift work for me???

[@tg2963]

Needs a cam

[@thatguy_jose]

Its a no for me. The truck looks horrible first of all, I don't like how it is lifted it, looks deformed. Rip transmission

[@justinhall8318]

Which is exactly why it aint your truck 😂 He could probably care less about your opinion.

[@thatguy_jose]

@@justinhall8318 Glad it ain't, not in a million years lol

[@andrewwoodall9119]

Where are yalp located

[@exhaustaddicts]

Nashville,TN

[@doubius1ify]

I disagree with those too 10" tips ! 😕

[@Meatwad.Baggins]

Where did he get that grill? I will buy one right fuckin now 😲

[@exhaustaddicts]

I Think he custom made it

[@santiagojessicafernando872]

I don't know about those tips in the middle

[@Bw40099]

backpressure is a myth

[@whofactchecksthefactcheckers]

Guess the owner wanted to pretend he had a diesel to look cool. Maybe he should have fixed the paint instead of putting two trash cans on the back 🤣

[@markswan5783]

Maybe you broke and can't afford it thats my look not yours who give a f*** what u think😂

[@ff912]

When the wheels stick out almost as far as the tow mirrors 🤢🤮

[@streetbike_jpod]

That's the whole point. It's modern style

[@ff912]

@@streetbike_jpod I get that’s the look people are going for, same with squatting trucks. It’s a trend that needs to die.

[@christopherbell3768]

@@streetbike_jpod ..It looks, rides and handles like shit.

[@ragintaurusmusclemercury7023]

@@christopherbell3768 It is a 4x4. Not a sport car. 😉

[@christopherbell3768]

@@ragintaurusmusclemercury7023 .... Well no shit?? 😉

[@Elan186]

back pressure is a myth

[@fullsendsornosends1176]

350?

[@kylemojo2413]

loud lifted chevy on big tires? thats pretty much always cool, but those exhaust tips lamo. i have seen some dumb exhaust setups but holy hell this has to take 1st place for retarded exhaust tips. if i had this truck the first thing i would do is just take a saw and chop that ugly shit off and just have it chopped behind the cab. besides that that truck is cool.

[@justtony21]

its a 5.7. in 1998 Dodge had the 5.9

[@markg7030]

A MOPAR 5.9 is a 360. Dodge had that from 1971 until forever. Not just 1998.

[@justtony21]

@@markg7030 um not really. Dodge had the 5.9 until the advent of the 5.7 which was a redesign and dropped into the Chrysler 300 and the Dodge Ram which eventually became the Ram. Upon then did Dodge drop the new engines in their autos. You won't find a Chrysler 300 with a 5.9, nor a Ram with a 5.9 after 2003. Prior to that it was the 5.9 Hemi Magnum. Even the Chargers, Challengers and your 2500 and 3500 have the 5.7 and the 6.2 and the 6.4 So its fair to say that after 2003 Chrysler went to the 5.7 to the present. Not forever as you say. Hope this helps. Cheers!

[@markg7030]

@@justtony21 You made mention of 1998. That is not the only year it was available. " Forever" was a figure of speech I used to show the 360 or 5.9 was used for many years.

[@briangarza9045]

Exhaust addicts why is there no x-pipe or h-pipe and you just crossed one pipe over the other curious of why this is

[@haraldnagler3801]

Can you come to 🇦🇹 austria and make this on my Chevy ? Greetings hari👍😃

[@kimotheking95]

💯💯💯💯💯💯

[@blackpanther1269]

Damn