2007 Dodge Ram Parking Lamps FUSE Problem TIPM Dead?

[@dustin6816]

Nice Milwaukee tools I blew that same fuse and had the same light problem but did not put a LED light in there just blew the fuse with factory bulb installing it

[@matthewheare3996]

You sir are a LIFE SAVER. Thank you sooo much!!

[@dustin6816]

Nice Milwaukee tools I blew that same fuse and had the same light problem but did not put a LED light in there just blew the fuse with factory bulb installing it th

[@tabithapurr3174]

Great video I don't have the light under the desk but my radio was recently upgraded to a digital screen DVD player I'm think that may have had something to do with it I'm experiencing the same issue with the running lights front and back definitely feel your brother it has worn me out...

[@MalarkeyTaylor]

Thanks for watching! Good luck tracking down your trucks problem!

[@Jaymoneyyyy]

2006 ram 1500 slt front back and left turn signals turn on, right is off. Switched bulb nothing yet, any advice

[@MalarkeyTaylor]

The fuses are left vs right. Maybe try checking the fuses under the hood? Maybe the right side fuse is blown for some reason?

[@Jaymoneyyyy]

@@MalarkeyTaylorthanks for reply, so the front two work, back left works, the right turn signal is off, do you know what fuse that would be by any chance?

[@MalarkeyTaylor]

@@Jaymoneyyyy aww man that sounds like a hard one. I'd say you might need to get out the multi-tester and start tracing the wires from the back. Maybe it's just the socket went bad, or could be a bad connection somewhere, Sadly it doesn't sound like something I can easily help with. If it didn't blow the fuse and the front one is working it's more of a problem than I can diagnose over the internet. Sorry, Good luck! if you do get into DIY mode I did find all the diagrams in this video from an alldatadiy subscription www.alldata.com/diy-us/en it was worth the money and saved me a ton of time tracing the wires and finding the right color wire. But it's not for the inexperienced. So if you know how to work on cars and find wires and fix things its worth the money... if you're not sure, find a mechanic or a friend that's chased wires before to help you learn. best of luck!

[@Jaymoneyyyy]

@@MalarkeyTaylor thank you!

[@ty6896]

My passenger rear taillight is out. I haven’t looked yet to figure out what is going on except switch out the bulbs. Would what you found possibly affect my issue??

[@MalarkeyTaylor]

Possibly. When the fuse blew it took out my front and rear running lights/parking lights. And kept blowing that fuse until I found and fixed the bulb. If you have clearance lights or a bad bulb in that under dash lamp and you blow that fuse check those items before chasing a dead TIPM.

[@ryandouglass7734]

Great video, I wanted to know where you found your wiring diagram/ fuse run circuit. I have a issue with my 2007 2500 diesel with a paracitic draw. Found out its drawing 1.8amps with everything off and I isolated it to fuse # 11 it lists abunch of things within that circuit. But I need a diagram and can't find one anywhere. Would appreciate it if you could help. Thanks Ryan

[@MalarkeyTaylor]

Hi Ryan. I used a service called all data diy it’s a subscription based service that you can get access to factory service manuals and other diagnostic data for your car. www.alldata.com/diy-us/en

[@MalarkeyTaylor]

also, FWIW if you look me up on instagram and msg me I could probably share the diagram on DM or help you track down just fuse 11 if you rather not sign up for the whole thing.

[@6nzchencho752]

Brooo I wired tow mirror lights that didn’t come factory and 3 grill leds. And that passenger side is the second fuse that blows. And man I’m going crazy ! I pulled a spare fuse 15 amp to get home. And bam now my speedometer doesn’t work. I just read on a KZbin comment there is a spare labeled fuse that is actually the culprit for no mphs. At the same time I have a BADDD Vibration when slowing down coming to a stop. And new power stop rotors and pads $400 later still vibrating like shit. New tie rods inner and outter because it’s a 2wd and still doing the same thing. Any tips !!!!?

[@MalarkeyTaylor]

All data diy has some good wiring diagrams. I’m not sure I have the spare fuse problem. The vibration sounds like tires or shocks but it’s impossible to say for sure from this side of the internet.

[@6nzchencho752]

@@MalarkeyTaylor tires are shot due to bad alignment. Gonna remove the old ones and put new ones really horrible

[@tabithapurr3174]

Mine's a 2003 4.7 1500. Still haven't got the lights working yet still searching for the fuse!?

[@MalarkeyTaylor]

Sorry I don't know what years have similar TIPM. I did find alldatadiy.com was helpful for wiring diagrams to track down the problem.

[@karlklein9239]

I’m having the same exact issue, but for the driver side headlights and license plate lights. Thoughts? Where did you find your diagrams?

[@MalarkeyTaylor]

I used all data diy subscription for the diagrams. There is a left hand side fuse iirc and the cab clearance lights are on that circuit too? I don’t remember I’d have to check.

[@karlklein9239]

@@MalarkeyTaylor well I don’t have clearance lights on mine. I still can’t find the problem and it’s driving me absolutely nuts!!

[@MalarkeyTaylor]

@@karlklein9239 the bed connector harness under the front left side of the bed would help isolate of the problem is in the rear or the front? I don’t think it’s too hard to just disconnect the rear part of the harness. 🤷‍♂️ sucks that it’s still going on. I have another new issue where my front driving lights come on when I push the brake pedal… But I’ll chase that someday, and maybe I find someone interesting when I do and I’ll post a video on it.

[@bobramirez1536]

Hey I have a question could u point me in a direction my rear running lights are not working no power to rear but front are on a hood got new taillights led woty the rester to add load tester the light and they work good lights are good just no power to plug for running in rear any ideas also my right rear turn signal no power but my 7way has power

[@MalarkeyTaylor]

Hi Bob, I assume you checked all the fuses? What year is your truck? If your tail lights go out and the front lights still work it might be some ground wires under the back bumper. If the truck is really rusty it might not have a good ground. But if it’s not the ground I’d say you’ll need to trace the wires back and see where the power stops. I think for the running lights and the circuits are split left and right. Not front and rear. So if both rear are out I’d look at ground wires or the harness plugs for the bed. Good luck!

[@4evaMobnJohn146]

My little light went out this time. One on center where u replace it.

[@4evaMobnJohn146]

What did u use to replace led light with

[@MalarkeyTaylor]

It’s been a little while but I believe it was a PC74 bulb. The LED was a bad choice. 😜

[@4evaMobnJohn146]

@@MalarkeyTaylor thanks

[@jojolna]

I have an 06 ram srt10 and I just recently lost both my head lights. All other lights work except main headlight . Disconnected HID and added regular and Led replacement and no power . I noticed this truck doesn’t have fuse for headlights and saw that this year has the TIPM ANY SUGGESTIONS? Thanks 🙏

[@MalarkeyTaylor]

My truck has fuses in the TIPM under the hood. Are you sure there isn’t a fuse on there that is blown? It sounds like the fuse might be blown for the headlights. If that doesn’t fix it the TIPM might need to be looked at by a mechanic and tested or replaced. 😞

[@Bigshoots86]

Fuck i just had all my lights go out in the rear and i just replaced them all with leds a few months ago

[@MalarkeyTaylor]

Oh no! That sucks! Good luck getting them solved!

[@4evaMobnJohn146]

Can’t find that wire under my dash

[@4evaMobnJohn146]

I keep blowing my 16. I need to find out it might be my amp light

[@MalarkeyTaylor]

How did you make out with this? Find the culprit?

[@4evaMobnJohn146]

@@MalarkeyTaylor yeah mine is my license plate lights. But by what the diagram I thought it has to be my license plate lights. Video helped me out