2010 Ford Fusion No Heat Problem FIXED!!!

In this video, we troubleshoot the no-heat problem on the 2010 Ford Fusion. There could be a few culprits at fault for this problem, but in this case, it was the door actuator.

[@sergey8644]

My Ford Fusion has the same problem. The issue is inside the dash, in the knob that is used to set the temperature. The fix is to replace the "Dorman A/C Control Module 599-228". But you can't buy a new one. The only one you can buy is likely to experience the same issue soon.

[@CountyAuto]

I pinned your comment so others can see it too. Thanks you.

[@user-oo9jq5jt2f]

Mine it has almost same problem when i switch to heat takes time to work same in ac , did yours had same problem? I’m gonna do it like you said hopefully it works out . Thank you for your comment and happy new year

[@rwkebalo]

Thank you for laying out the symptoms at the beginning of the video. My wife's car wasn't putting out any heat, so of course I start looking at the thermostat and the heater components. Turns out, the car had the same problems as this one did! Popped off that bad actuator and turned the door by hand, and bam! We've got heat again!

[@space6776]

How you did that ? Having the same problem

[@DanielFlores-mh4hk]

Excellent, thanks

[@mr.m348]

What size bolts are in the acuator? I tried everyone one I got Edit: nvm found out that its 5.5mm had to break out the old craftsman toolbox 😂

[@tokuku56]

What is this part called?

[@aricdiaz4576]

I had both actuators replaced and still no heat

[@CountyAuto]

Go to the local junk yard and get the actual dials (knobs) from the center console.

[@kermitalexander6655]

I have too get in😅😅😅😅

[@rickyavila673]

My 2012 fusion was leaking antifreeze inside the passenger side, I bypassed the heater core hoses in the front under the hood. I know I don't have heater anymore but the leak stopped. Is the heater core needs to be replaced, 2012 Ford fusion SE 2.5

[@jamesmahle1259]

Too bad the old guy cannot talk because the other guy don't know which is what.

[@kevinmarley6351]

Exactly