2012 Volkswagen Passat cc 2.0L diesel clutch replacement

07376369067
www.williamsmo...
Support the Channel Donate:
www.paypal.com...

[@pullman5250]

Just found your channel I’ve been in this trade for 45 years worked at several car and commercial dealerships. Left to go mobile and have been for the past 20 years it’s so hard going having to do without a ramp that you can stand under let alone with the weather as well . My knees are going now and fingers as well do to the cold and laying on my back. It takes its toll on the body eventually. You seem to have a great knowledge of all types of clutches. It’s a hard way of earning a living in this trade and I admire you because I know what it’s like . Merry Christmas to you and your family and keep the videos coming love watching a fellow pro.

[@WMCS]

Richard Zurowski thanks for sharing your experience. It’s always great to hear from a fellow mechanic. I left the main dealer Land Rover as a level 3 tech. With lots of breaks. Nice cuppa teas and long lunch breaks .... not to mention paid holidays. But there’s nothing that beats working for yourself ... I’m very cautious so I wear well padded clothes. Always warm and dry. I always lay down. So there’s no stress on my back. And very rarely go on my knees. Except when removing and putting wheels on. And on the occasions where the repair has been so intense .. just to give the good lord some thanks. 😊💫.... thanks for visiting the channel. And for your great feedback. Have a great Christmas and happy new year 🥳💫✨🌟

[@pullman5250]

Kevin-Albert Williams glad to see that your well padded and wearing warm clothes Kevin . Also I see by all your videos that your doing the right thing by putting down those rubber tiles. Keep those videos coming I watch them all in the evening relaxing with a pint lol . All the very best .

[@bigbill74scots]

That beautiful moment when it sits on the dowels and you can relax your arms..bliss!

[@WMCS]

Scottish Outdoors mate I can’t believe you clocked that 😆😆.... I couldn’t believe it myself. It went straight on the clutch spline and locked itself on the dowel instantly.... it that was a chess game it’d been check mate...😂😂... Have a merry Christmas and a great new year to you and family and hope you have a proper piss up...💫🌟✨🍹🥃🍺

[@bigbill74scots]

@@WMCS Lol classic way to spot someone else in the trade isn't it 😂👍 I was like 'yeaas, go you!!' when you did it😁 Same you brother, have a good break with the family and may Santa bring beer and silliness for the season🥳🥳😎😎

[@gabrielacatrinei6669]

The best video ever.He let us see everything.

[@marcinmorris]

I need to buy that wobble extension for myself :) Good job - respect for doing cluth changes on a driveway :)

[@rustbeltrestoration]

I should’ve watched this video last year when I manual swapped my 2.0tsi dsg car. I struggled for hours trying to get the dsg out and the 6mt in. Can’t remember if I removed the flanges for the cvs or not…. Good work brotha

[@andytaylor9032]

You make it look easy man handling that gearbox back in. 😀

[@WMCS]

Andy Taylor it can get a bit heavy sometimes... but definitely saves going to the gym...😆😁... thanks for the feedback...

[@Mrkwiat70]

Respect 👍

[@WMCS]

Maciej Kwiatkowski thanks a lot for your review .. appreciate it. Have a great Christmas and happy new 💫🌟✨

[@Mrkwiat70]

@@WMCS Merry Christmas to you. I like watching your movies. All the best.

[@samyru5]

That was verry usefully video.I see two time befor start to change my clutch,and in 4 hour was done. I do like this in same position. Great video. All the best i wish you !

[@125sm3]

That gear box looked a bit of lump. Seemed pretty straight forward for a FWD. Great video.

[@WMCS]

125 SM there was definitely some weight in that one mate... but the repair itself was a swift and quick one. Under 3 hrs. Have a great Christmas and happy new year ...✨🌟💫

[@125sm3]

@@WMCS Have a great Christmas and all the best for you in 2020

[@shaagealgareb9189]

It works perfectly..and precisely I learn a lot from you..Thank you

[@WMCS]

Thank you.

[@alanross2790]

Top class work mate.

[@victorrogeliobruzzo6129]

Excelente la demostración del trabajo realizado. Me sirvió un montón para que yo pueda realizar lo mismo en VW cc 2013. Muy agradecido. Valoro mucho su empeño en ayudar. Abrazo grande

[@alejandrovilla4257]

Very big, you have to have two balls to upload the change like this without help, very big very big, excellent videos, greetings from Spain

[@mohammedzahboune824]

Great job! I'm a fan of TDI engines. I think I have to learn mechanics of cars

[@Val-lv1hy]

Best in the business !

[@jimjam1934]

Well done with that one mate!

[@WMCS]

Jim Jam thanks a lot pal. And thanks for visiting the channel again... Merry Christmas to you...🌟✨

[@vodonnell1]

You are a tough man and hard worker enjoying your videos.

[@jimmyjones1634]

Well done old school

[@edgarhernandez1060]

Good video but is missing info, how assemble thrust bearing should be a lot much better if you show that part

[@Alan.Nariman]

One of the best video I ever see . Thanks big man .

[@zedman442]

Great job as always buddy. Love how you bench press those gearboxes out! That impact wrench sure makes light work of those nuts and bolts. That tool tray is a god idea where’s it from?

[@WMCS]

Zed Man thanks for the review. Definitely wouldn’t leave home without that impact wrench. ... I got the tray from b&q garden centre. It’s one of those flower pot trays🤩😁. Does the job nicely in keeping all tools at arms length.

[@steeveladry6148]

Well done man...!

[@MyJarrus]

you should also tell the difficulty level of the job before the video starts, nice one

[@WMCS]

Jarrus Killa thanks for the input. I’ll try and find a way to incorporate that in the video. Have a merry Christmas and happy new new year 💫🌟✨

[@lesterthumwood3768]

It’s like watching art. 👏👏👏👏

[@autogc22]

Reaaally nice sir. Good job. You need a lifter for those gearboxes. Your back will thank you.

[@badereddineouzeren7705]

Smooth work

[@djakkarl7586]

You are very strong is not possible for my car i need two Guy's

[@thomas24469]

earning your money there mate ! those gearboxes are heavy to be putting in on your back on the ground!

[@WMCS]

Tom williams .. thanks for visiting the channel... I suppose I’m a bit blessed with some strength 😁🤪.... are you a mechanic yourself Tom... apart from the fact we share similar surnames...🍻🍺

[@thomas24469]

yes mate great surname , came across you channel quite by accident , enjoyed watching your content hope you do well with it

[@WMCS]

Tom williams thanks for the feedback and have a great new year. 🍺

[@Peter-hc4di]

Like a pro! Because you are one :) Very good job sir!

[@WMCS]

Peter thank you so much for your positive feedbacks... definitely means a lot. Have a lovely merry Christmas and happy new year to you and family 💫🌟✨🍺🍺

[@wandango5913]

Was this the same 6 speed box that's in the 2012 transporter, I've tried looking though all your videos and can only see transporters with 5 speed or 2.5 six speed, I'm a bit concerned about the extra weight as I don't think I'm as strong as you throwing gearboxes around all day for fun

[@edmcmullan1964]

Top man

[@WMCS]

Thank you.

[@abisismael1343]

Very good video ! You make every day a beautiful job ! Please can you show the moment when you remove and change the clutch inside the gear box ? Thanks !

[@WMCS]

Abis Ismael ok. Due to popular demand. I will start showing the removal and fitting of the parts itself

[@ashs8606]

It’s repeat request but it be awesome if you showed a full clutch replacement. I am going to selfish & ask it be a VW preferably a B7 Passat =)

[@abisismael1343]

Not all the clutch replacement. That's not possible. But we demand to Kevin to show the details of work "inside the gear box". That's not the same. And we thank him very much because he has already started showing everything that needs to be done inside the gearbox.

[@WMCS]

Ash S no probs. If you look at the latest vids on the channel clutch replacement procedure is now being shown. ... will keep your request in mind when I do another VW

[@WMCS]

Abis Ismael thanks for your support. I will be showing more of the actual clutch replacement and bleed procedure from now on.

[@bucurcristian5689]

Nota 10 ! You are the best!

[@dragosdragos6058]

amazing video as usual did the clutch needed bleeding ? and if so is the nipple located on the slave cylinder ? Thanks

[@robjames292]

Nice work mate. What's the make it part number of the converter on the half inch to 3/8 drive that you run the driveshaft multi spline bolts in? Handy tool that. Got that slight more extension on it. Thanks. Always watching you uploads find them quite peaceful.

[@martinjones849]

Another fine job Kevin, that one looked heavy? Are LUK the best?

[@WMCS]

martin jones mate talk about some weight that gearbox was it..😆... LUK are good for certain cars but not the best in my personal view... SACHS for German cars. Valeo all the way for french cars... I always use GM for Vauxhall never LUK as they seem to always fail on the CSC very prematurely... Have a great Christmas and happy new year to you and family 🌟💫✨

[@martinjones849]

Do you ever use those cheapo’s from ECP ?

[@WMCS]

martin jones oh god never the cheap ones. .. you give two years warranty on parts and Labour. So I always go for manufacturer recommendations...

[@mrgrumpy5116]

that looked like a heavy gearbox mate, I know I couldn't have lifted that up there .. maybe at one time a long time ago, but no chance now, it would have to be on the jack. well done. Did you ever do a Saab 900 ..

[@WMCS]

Gearbox definitely had some weight to it .., I suppose I’ll get to a stage where I will need a transmission jack.., one day soon..!😊... I’ll definitely take on the Saab 900.,, they are quite nice to work on the old Saab.

[@mrgrumpy5116]

@@WMCS I only ever did one, it was quite easy, and leaning into the engine bay was better than pulling the drive shafts.

[@dominikpawlak9440]

And again there was no tool used for SAC. My colleague changed the clutch in the Audi S6 and changed it for a new one every month.

[@mr.t2585]

Nice job. Lot of space in passat. Can you shot in one of your future videos how to reverse bleed hydraulic clutch?

[@mohammedabdurrouf8038]

I love your work bro so nice Thanks

[@blackbird6402]

Unfortunately i can’t book a repair since am in Tunisia would you please recommend me the best brand for VW passat cc 2.0 103kw DSG6 CR TDI ?thanks

[@vittoriofasolato3687]

You are the best

[@WMCS]

Vittorio Fasolato thanks for a great review... much appreciated and thanks for visiting the channel

[@davog1946]

Absolutely hell of an effort pressing that box back on. What’s the point in removing the shaft flanges out of interest?

[@davog1946]

PS, just made my day learning I can leave the subframe in!

[@WMCS]

Oh yeh definitely.

[@WMCS]

So it doesn’t anchor itself at the back of the flywheel coming out.

[@davog1946]

Ah lovely. Makes sense, what kits do you use? I see the Sachs kits are reasonable and don’t require pre loading.

[@gerryduggan6821]

Total respect 👏👌👍

[@petemechanic8249]

Enjoy watching this Channel mate, merry Christmas

[@WMCS]

Pete mechanic thank you for your feedback. Have a great Christmas and happy new year 🥳 to you too. And thank you for visiting the channel. Bless up.

[@billywhizz98]

That looked an easier one to do Kevin when you disconnect the battery don’t you use a battery link so you don’t have to re code the radio I was watching the savage garage and he’s just replaced the battery on his BMW 1 series and had to use a diagnostic tool to code the battery before it would start

[@martinjones849]

Savage Garage ? He’s a chancer just trying to get sponsors not in same league as K A W

[@martinjones849]

And wrong battery & registration!

[@WMCS]

william walker most cars nowadays even the recent ford ... they only need a re code if you’re changing the unit. Rather than disconnecting the battery. ... But on older cars as a precaution I always make sure I ask customers in their bookings to have their code at hand. Or at least let them know. Hope that helps. And I hope you have a lovely merry Christmas and a 🥳 happy new year...💫💕🌟🍺🌟

[@billywhizz98]

I was just curious to be honest as I was watching the savage garage he has a BMW 1 series that he changed the battery and had to re code it in before he could start it then when I seen your video I thought if you must have to do the same if you have to disconnect the battery

[@kamelen9786]

@@martinjones849 BEFORE IT WOULD START

[@dieselstrong694]

Much respect, brother 👍

[@badstudios900]

Brilliant video mate. Im thinking of doing my clutch on an audi a3 2.0tdi. Are these roughly the same? Ive heard the engines are the same and that engine bay looks the same as mine. New to the car scene as im only 17 and not done a lot apart from brakes and timing belt.

[@WMCS]

BADStudios almost identical but smaller. If you look through the channel you’ll see a Passat or a vw with the exact same engine as your A3... anything just drop us a message.

[@badstudios900]

Kevin-Albert Williams thanks a lot mate much appreciated

[@schemszerti5688]

good job. I would like to know the approximate weight of this gearbox. thank you

[@janmachac6394]

Nice job man.What is that red lubricant calls you put on the gearbox and shaft?Could you help me out please?thanks

[@WMCS]

It’s red rubber grease. How can I help ...

[@janmachac6394]

Thanks for that.I am just about to do fly wheel and wet clutch on my cc 2008 but has got dsg gearbox.Will I be able to pull it out same way like you did?Is there any size difference between manual and dsg transmission?

[@WMCS]

Jan Machac DSG are a different kettle of fish altogether..., outside my bandwith that one.

[@janmachac6394]

Kevin-Albert Williams No worries.I know is bit more work to it.But anyway thanks👍

[@colintx800]

What gloves do you use ?? They look like high quality and can take some abuse. I like the way you just get on with it without fucking around lol.

[@karimkimo3406]

👍👍👍👍😎😎

[@alisterwest6987]

More room to work on that motor good job done again do you save settings ecu before you remove the battery or are you so darned quick you don't need to smooth job like your work 👍happy Christmas to you and your family 🌲you deserve a rest 🎅

[@WMCS]

Alister West thank you ... definitely was a much quicker job than a good few. Bolts were big and few ... and definitely a lot of room to work. Could nearly park a jumbo jet in there. Merry Christmas to you and your family as well... I’ve got one more job then it’s start again next year ....

[@diymechanic4378]

Is clutch replacements your full time job? What area do you work in? I’ve got 2 VW that new clutchs

[@WMCS]

Yes DIY.,, that’s all I do everyday. I cover 100 mile radius from Bedfordshire www.williamsmobileclutch.co.uk

[@messaoudaboudissa4935]

عندما تمتلك الثيقة والطاقة الايجابية.

[@ggrant1491]

Like a boss!!

[@isobiker]

Hello Nice Work, what Kind of mats are this, Eva Mats?

[@josepe749]

Respect men bravo

[@sattisingh3141]

Hi how much cost for it I need for my car

[@pedronogueira6897]

Super!

[@mohammedkaddouri1548]

gracias

[@copperkipper1]

Ah the classic pelvic thrust lift

[@WMCS]

That’s it. Works everytime. I take it you’re a mechanic yourself.

[@castrolgtx5064]

Subscribed to your channel 🖐 Fantastic video how did you bleed the clutch master cylinder

[@WMCS]

Springer spaniel thanks for the review ... If you look at the most recent videos on the channel I’ve started showing the clutch bleed method ... let us know what you think.

[@MyJarrus]

guys I just did this Job don't be fooled by how easy it looks Im warning you yes the job can be done on the drive and you can manage to get off the gearbox on your body if you are strong but putting it back together is a nightmare so I had to use Jack and another person just to help me jack it up whilst I was holding the Gerabox AGAIN THIS JOB IS NOT FOR EVERYONE AND YOU WILL BE BEETER OFF PAYING PROFFESSIONAL FOR THE JOBE JUST BELIEVE ME

[@WMCS]

Jarrus Killa 😁😆... thanks for sharing the experience of your repair. ....glad to hear you managed to get it done tho ... good effort and thumbs up to you .....

[@steeveladry6148]

Can you tell me around what millage the clutch on the passat tdi as to be replace

[@WMCS]

About 90k miles usually

[@steeveladry6148]

@@WMCS Its not much and i know that depend of the driver but Honda can make 300km whit the same clutch is this vw are cheap or pore quality ?

[@maxautouk]

I noticed your not using the hydraulic lift anymore... Too much faff and weight to set it up everytime?

[@WMCS]

Max Attack mate it was getting a bit sketchy... too low. So I had to do a lot of rolling about. ... and it started to feel a bit unsafe underneath.... just a bad feeling... I’m much more comfortable with the back wheels firmly on the ground..... and plus if something happens to me the wifey would have put me in the dog house ... especially if I couldn’t work..😆😂😜

[@davidrodrigues9485]

nice job Kevin.. do you think an audio a3 2.0TDI 07+ it's something similar? keep the good working :)

[@WMCS]

David Rodrigues if you look through the channel there’s an Audi TT which will be exactly like your one. Let me know what you think

[@davidrodrigues9485]

@@WMCS Hi, thanks.. saw it :).. since you have been doing that as professional.. have you used before special tool for tightening/adjust the clutch? like this: kzbin.info/www/bejne/iqGYfJh3htOnfa8 because i'm thinking if this step are necessary or not.. at least for the clutch i've mentioned.. thanks..

[@wastelander6341]

Hey Kevin is this a similar process to tfsi? Where are you based?

[@WMCS]

Sean Stanley if you look through the channel there is a tfsi clutch replacement. We cover about 70 miles from Bedfordshire

[@nh-nw2pz]

Is it not worth changing flywheel at the same time?

[@crazyfacejack2520]

n h he has replaced it , new dmf is visible

[@WMCS]

n h always replaced DMF with Diesel engines. ... have a merry Christmas and a happy new year 💫🌟✨

[@WMCS]

crazyfacejack25 you spotted that well mate...eagle eye 😂😆.... merry Christmas to you and a happy new year 💫🌟✨

[@rossstreet7847]

Imagine doing that on a gravel driveway...

[@jamie83341]

New front tyres required aswell lol

[@WMCS]

Jamie Mcghee 😆😂 it was flat mate. You clocked that one ... proper eagle eyed... Have a merry Christmas and happy new year 💫✨🌟🥃🥃🍺🍺

[@thomasbor]

why is it that you do not show the fitting of the dual mass flywheel clutch assembly?

[@WMCS]

thomas b try watching the newer videos

[@thomasbor]

@@WMCS I wanted to see this particular model. They are not the same for all models nowadays

[@blatt5478]

Hallo, why you only clutch reparieren Sie? 👌👌👌❤

[@drmata2012]

Hi Kevin, Great job!!! I’m planing to replace the clutch and flywheel in my 2012 vw sharan 2.0tdi 140hp. What brand would you recommend and here can I get it from? Many thanks and keep the videos coming. Sil

[@WMCS]

Szilard Mata for the sharan. Definitely go for SACHS all the way.... don’t mix and match ie LUK and SACHS as a word of caution as it won’t work correctly.

[@drmata2012]

Kevin-Albert Williams Many thanks Kevin, Do you know where can I get shachs form? I’m looking online and only finding luk or valeo.

[@WMCS]

Szilard Mata if you have your full UK registration I can find the part number for you. 💫

[@drmata2012]

Kevin-Albert Williams Hi, It’s RO61PGF Also replacing the dmf. Thanks

[@WMCS]

Szilard Mata send me a message 07376369067 and I’ll forward you all the part number for Sachs and the discount for when you need it.

[@clarknicolas6780]

Great Job fella!👏🏻.. are close to london by anychance? issue’s with my gearbox.

[@WMCS]

Clark Nicolas thanks ... I’m down in London area quite often. All round the M25.. What’s happening with the gearbox

[@clarknicolas6780]

Kevin-Albert Williams , Hi Kevin, Have some rattling noise on idle and on 1st 2nd gear 3rd 4th noise calms down a bit, clutch was done recently, Any idea?

[@clarknicolas6780]

and gearbox oil change last week too no metal bits found on the old oil. here is my mob [phone] send me a tex Kevin and i’ll give you a ring pls

[@WMCS]

Clark Nicolas it can only be two things. . Was the DMF replaces as well. . Any judder when pulling off from standstill .Have you noticed any vibrating pedals or pulse when the clutch pedal is pressed about 1/4 way down. Is there a noise that fades away when clutch pedal is fully pressed down. Let me know

[@WMCS]

Clark Nicolas ok. Just with family at the minute but can text you in a bit

[@manuelduran2113]

Cost of service end parts... please

[@eduard-e2528]

tools video please 😁👍

[@WMCS]

Pc Etico that’ll be inviting a break into my van won’t it. 😁😂

[@eduard-e2528]

@@WMCS Hablas español ? no entiendo mucho el ingles 😄 ... queria preguntar que herramientas usas ( marca ) Maletin JBM VS STANLEY , cual elegirias ? gracias. Un saludo desde Madrid España

[@WMCS]

Pc Etico no Easonol... would love to speak the lingo tho...💫... hope you have a great Christmas and happy new year 🥳

[@alexandru2943]

👏👏👏👍👍👍

[@WMCS]

butusina alexandru thank you very much. Merry Christmas to you and family and a happy new year 🌟✨💫

[@alexandru2943]

@@WMCS Thanks! YOU ARE THE BEST👏👍

[@EIVLN]

Did anyone see the state of the air filter?

[@martinjones849]

Why did you remove o/s shaft flange from diff? More room?

[@zuxioa3278]

martin jones yes its Pretty hard without removing the flange

[@martinjones849]

Blimey I'm surprised CSC failing what do you recommend for my Nissan NV220 Kevin? And has it got a DMF?

[@WMCS]

martin jones LUK Seems to make them from plastic rather than metal. Their clutch is good. But I always go for the FTE CSC

[@martinjones849]

Ah yeah I’ve used that make in the past I think Swedish or Denmark?

[@WMCS]

martin jones yes they are the main manufacture of CSC’s for all European car productions. If my knowledge serves me right.

[@schrauberermel1758]

👍👍👍👍👍👍👍👍👍👍

[@westawesta9063]

👍👍👍👍👍👍👍👍👍👍👍👍👍👍

[@notoriousairsoft467]

Would this be the same way to do the touran 2.0 tdi

[@WMCS]

notorious airsoft if it’s a 2 wheel drive yes pretty much the same.

[@notoriousairsoft467]

@@WMCS yes it is

[@WMCS]

notorious airsoft it’s definitely the same one then. Are you gonna attempt it yourself ...

[@notoriousairsoft467]

Yes iv dont clutchs before just not on a touran and i no on my mk4 golf tdi it was a bit of a pig to get back on

[@WMCS]

notorious airsoft it’s pretty much a bigger version of a golf. If you remove the back flange 07:25 you should be able to remove and fit it back on fairly easy.....

[@anlilhan8877]

first like bro :)

[@WMCS]

Anıl İLHAN nice one pal... first in line 💫🌟

[@anlilhan8877]

I'm a mechanic in Turkey. You love your job, clean work. 👌👌👏👏

[@WMCS]

Anıl İLHAN thank you very much for the feedback and great input. Hope your work in Turkey goes well and smooth ....

[@Cef3axon1]

Dsg or manual

[@WMCS]

CallOfDutyMobile manual

[@drissauto1958]

Voilla la passat

[@WMCS]

Driss Auto 👋 hola ca vas bien

[@drissauto1958]

@@WMCS cv merci

[@MrPropanePete]

Great spot to whip a gearbox out, right next to a wet hedge

[@martinoconnor1484]

Them front tyres are fucked

[@newbridgecarsales9695]

We’re are you based

[@WMCS]

newbridge car sales we cover up to 80 miles from Bedfordshire

[@cherifchahid6726]

*His number please*

[@WMCS]

www.williamsmobileclutch.co.uk

[@martinjones849]

Sorry NV200

[@WMCS]

martin jones if you message over your registration I can definitely find out for you 07376369067

[@rolandnagy6118]

NAGYON UGYES VAGY

[@messaoudaboudissa4935]

يجب الحفاض على الأرض والبدور الأصلية...

[@martinjones849]

Yeah silly question really