3D Printing a $500 Warhammer Chaos army for $100

#warhammer #ageofsigmar
In this video, I 3D print and paint a full 2000pt Chaos Everchosen army for Age of Sigmar.
Kolectiv SG: / kolectivsg
Bestiarum: www.myminifact...
Ghamak: www.myminifact...
Lord of the Print: www.myminifact...
All paints are from the Pro-Acryl range: elementgames.c...
Black Brown Primer
Burnt Red
Bold Pyrrole Red
Orange
Coal Black
Turquoise
Sky Blue
Transparent Black
Yellow
Bold Titanium White
Elegoo Saturn Print Settings:
Layer Height: 0.04 Bottom Layer Count: 4 Transition Layer Count: 0 Exposure Time: 2.8 Bottom Exposure Time: 12 Light Off Delay: 0 Bottom Light Off Delay: 0 Bottom Lift Distance: 7mm Lifting Distance: 7mm Bottom Lift Speed: 60 Lifting Speed: 60 Retract Speed: 180
Get discounted Games Workshop products and support this channel by using my Element Games affiliate link:
elementgames.c...
You can support me for as little as $1 a month over on my Patreon page:
/ thewargamer
If you enjoyed this guide and would like support the making of more, you can help fill out my bitzbox on BuyMeACoffee: www.buymeacoff...
Conversion Equipment:
Swann Morton No.3 Handles: ebay.us/ZQaze2
Swann Morton 10A Blades: ebay.us/bdb1HZ
Plastic Magic Glue: amzn.to/2Lfa7Cw
Hobby Saw Large: amzn.to/3ncxHwJ
Hobby Saw Small: amzn.to/3rPs6Aj
Pin Vice: amzn.to/2X2pm46
Files: amzn.to/2LfNNZe
Red Grass Games Precision Nippers: www.redgrassga...
1mm Florist Wire: ebay.us/3sESsM
Join me on Discord: / discord
Follow me on Twitter: / fraypaintbrush
Like TWG on Facebook: www.facebook.c...
Conversion Equipment:
Plastic Magic Glue - amzn.to/3es3nuH
Equipment Used -
Canon EOS M100 - amzn.to/2oUwo9U
Sony ICD-PX240 - amzn.to/2wukmXt
Blue Yeti Microphone - amzn.to/2vFmKx7
Painting Equipment Used -
Iwata C-Plus Airbrush - amzn.to/2vPvNMr
Smart Jet Pro Compressor - amzn.to/2vjPGKb
Windsor Newton Series 7 Size 0 - amzn.to/2uGDEHn
Windsor Newton Series 7 Size 1 - amzn.to/2vPzhyA
Vallejo Black Primer - amzn.to/2vFM0TU
Masters Brush Cleaner - amzn.to/2uG4T4L
Studio XL Everlasting Palette:
www.redgrassga...
Icons vector created by alvaro_cabrera - www.freepik.com

[@PeteTheWargamer]

Help support the channel by using my Element Games Affiliates link and code PET818 at check out: elementgames.co.uk/warhammer?d=10694 OR maybe check out some of my T-Shirt designs and other merchandise here: petethewargamer.com

[@carlostroncoso4475]

It's mind boggling that buying a 3d printer and the STL files, printing just one army and then throwing away the printer and deleting the STLs is cheaper than buying the plastic kits.

[@KaffiRawr]

It depends on how you actually value your time. You're putting in a lot more money in hours, materials and equipment. And they will come with frustrating mishaps along the way and a learning curve to get a decent product.

[@ekulerudamuru]

@@KaffiRawr nah, gw products are overpriced, I'll go for the 3d print since I can do stl files myself,

[@KaffiRawr]

​@@ekulerudamuru Ye. Not saying it's unreasonable to do it. Just that looking only at money spent won't be a fair comparison in deciding what's cheap.

[@TheMrBonzz]

@@KaffiRawr MG Gundam cost less, better engineering, fit perfectly on eachother no glue required ever, with higher quality Plastics, colored plastics, glass plastic all in one box for much much cheaper price.

[@ekulerudamuru]

@@KaffiRawr nope, I can make lets say a 40k points army cheaper than buying them for they're actual price

[@OggyOggyBuilds]

Well someone's just been removed from gws "send stuff for review" list XD but great video none the less

[@PeteTheWargamer]

Oh well, I guess I'll just have to 3D print everything instead then 😂

[@CreamAle]

You say that like it's a bad thing. Sure getting free stuff is nice.. but being beholden to all sorts of rules and censorship ain't, especially if it's a shady company.

[@SirLuquent]

GW's licensing agreement with content creators is insane and super one-sided.

[@johnborrini4623]

After all their BS, I'd rather see this than the newest overpriced plastic bits a week early lol.

[@phoenixdblack]

I was about to say this. Also he is probably going to be removed from the Community Articles, haha

[@01oo011]

Guess I’m getting a Saturn. Warlord Titan here I come! Best thing about 3D printing is you can customise to your heart’s content before printing.

[@PeteTheWargamer]

The Saturn has a pretty decent sized build plate too, should be perfect for those larger components!

[@TheGodEmperorOfMankind_]

So uh, did you end up getting one after all?

[@01oo011]

@@TheGodEmperorOfMankind_ Got a Halot one instead. Smaller but quick.

[@SeraphimKnight]

I imagine this sudden will to 3D print whole armies had absolutely nothing to do with recent events 😅

[@alecmiller5296]

Join the dark side. 5 2000 point armies with only like 3-4 bottles of resin

[@lowaimnobrain]

@@alecmiller5296 Can you play with them at game shops/tournaments?

[@eneaceribelli8023]

@@lowaimnobrain official GW tournaments no, general tournaments should have no problem as long as the print is easy to understand what it represents. For games shops it may vary but usually there should be no problems. If you play in one remember to support it financially because a printed army equals to missed money to pay rent and bills for the shop.

[@flauntingfloof]

@@lowaimnobrain Not at official ones, but who would want to play at official ones? You'd get nasty glares just for having an official model with lots of green stuff sculpting on it to make it stand out.

[@TheSevenUpMan]

Just FYI: You can always have a silky-smooth surface for your FDM-printed base by enabling the Ironing feature in Cura - even if you're planning to sculpt the base anyway.

[@businessathlet3587]

Thank you for this tip 👍👍👍

[@PraetorGix]

Remember those couple times when Pete received early models from GW for him to convert, like the primaris bikers? Yeah, that's not happening ever again.

[@shadowofhawk55]

who cares? Frell Gdubs.

[@jamesvaughan7274]

"Chaos corrupted Rincewind" brought a smile to my face

[@FyreMagyk67]

When filing or sanding down resin, I'd recommend wet sanding to keep you from breathing in any fine resin dust.

[@grimbostink7607]

This is something that's been nagging at me for a few videos now. I'm not a huge fan of the red and blue lights and background used during your beauty-shots. It makes it difficult to really see and register all of your fantastic paint work when either strong red or blue tones are washing out the entire paint scheme. This was super apparent in this video too. I had no idea where the lights ended and the paints started and the addition of the red and blue background made things even harder to focus on with all of the bright primary colors demanding attention. I don't want to come across as pushy, over critical, or even like I hate your channel. I love the work you do and I PERSONALLY want to see it all in it's pinned, greenstuffed, and dead-animal-bitsified glory! I'd love to hear how others think too though

[@aaronhelmsman]

I agree. Especially for this, it blurs the details.

[@coooolibri]

idk, if i follow the video he only colors it from the side, like a shade. but doesnt paint anything else except the eyes. you gotta like to have it like that, but it is of course more work to paint it properly/fully.

[@Guts3570]

hiding the paint may have been intentional. it looked like he did a really quicky job on the painting in this video.

[@popcornfilms1]

Agreed

[@SabreFang121]

Couldn’t even tell if these were actually painted due to the lighting

[@LB-ru4xs]

Great job as always. Very interesting to see you do OSL. I usually prefer conventional paintjobs but it’s really nice to see something different every once in a while :)

[@PeteTheWargamer]

Me too! Doing something a little more "artistic" and less realistic was a bit of a divergence for me, but it was fun to try out a new technique.

[@mattcurr9931]

@@PeteTheWargamer plus all the time it saved. great to know you can speed paint an entire army and have it look super great

[@LB-ru4xs]

@@PeteTheWargamer Always great to hear a creator having consistent fun with his content.

[@asaxander740]

I am blown away by the quality of the prints! GW is finished and there is nothing that they can do to stop the tide.

[@DFloyd84]

Pre-supported STL files aren't always plug and play. It pays to run the sliced file through UVTools to catch unsupported parts to fix before you print them.

[@LumberingTroll]

UVTools is overly aggressive and catches things that are not a problem, it depends on your setting, and what layer height your print at. if you print at .05mm then it wont matter if UV tools is finding an island at .01mm as it will be "merged" into the layer below it anyway.

[@Maxmillion77]

Such a simple, yet effective and good looking paint scheme. Great sculpts as well although I agree there is definitely a limit to resin detail compared with plastic.

[@PeteTheWargamer]

I think a bit part of it is the number of components. If a kit is split down into more parts you can have deeper recesses and more defined details. A lot of the 3d printed kits tend to split their minis into as few a parts as possible. It definitely helps with assembly time but at the cost of some level of detail.

[@Matt-md5yt]

Glad to see you do this my friend

[@PeteTheWargamer]

Thanks, I had fun doing it!

[@NatesMiniatures]

Loved the colour scheme you went with Pete, Very effective.

[@kakopalangano2823]

be careful Pete, GW Adeptus Legalitas can drop pod any moment at your house to sue you. That and the GW Stasi.

[@PeteTheWargamer]

A.K.A Channel Exterminatus

[@logosofgame4273]

@@PeteTheWargamer Stay where you are. The Ordo Hereticus will be with you shortly.

[@user-kz5pk1yt2t]

They look great! I would like to see future videos where you 3D print parts to kitbash onto warhammer models. Blur the line so much between what is allowed and what isn't so that their stores and events can't do squat :^)

[@idizme4316]

I have really been interested on 3D printing, but have never really been too educated about it. But following you has really boosted my confidence and also your step by step commentary really has thaught me a lot, and seeing you do this "trend" really has me thinking about getting 3D printer even more. Thank you for that

[@grimnir8872]

It's a dumb meme, where you spent way more money than you think because most 3D printers are designed to break in around 3 years worth of service due to how poorly constructed half of them are. Unless you really want to have a dozen armies it's not worth buying and spending all the effort working with toxic resin residue just for a casual side hobby. Pete the paid shill can do it because he probably got a discount with how much he plugs his cheap chinese tat.. considering Saturns have absolutely abysmal repair rates.

[@HannesMrg]

@@grimnir8872 you can get an anycubic photon for around 100 bucks, so even if it was to break after a year(which it probably doesn't), you could simply buy a new one and still be way under the budget. No need for some special discount.

[@lowaimnobrain]

@@HannesMrg I only see those for £250+ Any tips?

[@HannesMrg]

@@lowaimnobrain when I wrote the comment, the photon zero was available quite cheap, but it seems that anycubic don't sell it anymore. Maybe refurbished you can still find one. A few months back I got a refurbished zero for 86€. I think the best budget option currently is the anycubic mono for around 160 pound(on aliexpress). Sadly over 100, but also better than the zero.

[@michaeljdauben]

I love your two-tone paint scheme! Very dramatic, but simple and quick to do. 👍👍👍

[@TerryTheFire]

These are so spiky you could scatter them on the floor as crow's feet to keep away burglars

[@PeteTheWargamer]

Alternate title "I spent $100 on a 3D printed home security system"

[@TerryTheFire]

@@PeteTheWargamer they would probably only be a one-time use thing, since I don't imagine they are very strong

[@lachlanthompson6552]

for the different variation in the troop selection you can, Flip the models and change the size by 5-10% This will create slight variation on mass troops so they wont look as jaring having 20 models that look the exact same.

[@shadowofhawk55]

I remember seeing Tabletop Time doing something similar. Something I'd also do personally is (if I have the files) change around some of the blades and helmets to create a little more distinctness.

[@Shrouded_reaper]

There are some great tutorials on how to repose joints in your favourite .stl editor. It's really easy.

[@kalin1993]

I think this is like the "Thin your paints!" of the minipainting community: "After washing put the printed part with supports into hot (as hot as you can handle stil keeping your hand in) water, leave it for a minute, then remove the supports." I basically never need to do any other support cleanup his way, just the odd on the model support for those hard to reach bits.

[@morganw.4711]

“Chaos corrupted Rincewind” is a hilarious and horrifying thought. 😂

[@mikaelpeterson6567]

Absolutely love Bestiarum miniatures! Think I've printed 50+ of their sculpts so far!

[@bopaintsminis]

You would have to be a real Buttermilk Bob to not want to play against that army. It's amazing. Cheers.

[@PeteTheWargamer]

Thank you very much! I shouldn't have any problems playing against the guys at the store I go to, they're all just there to have fun with the game.

[@bopaintsminis]

Yes, game. Let's all remember that this is a game. Have fun. Post pics.

[@mitchl5220]

Bestiarum Miniatures has so many amazing models that are perfect as nurgle daemon princes

[@PeteTheWargamer]

Definitely, I absolutely love how many dragons they do in various styles and sizes.

[@JainZar1]

I printed myself a whole "Elysium" Kill Team to play with the Krieg Veteran rules. Since FW doesn't make those models anymore.

[@OmegaLittleBob]

I think that Demon Prince definitely deserves a little more painting for certain. Still, amazing job!!!!

[@shanmtek12000]

This is becoming a bit of a hot topic. Iv seen a few videos of 3d printed armies. Loving it. 👌

[@PeteTheWargamer]

Definitely! The 3D printable models seems to have exploded too, lots of cool stuff out there.

[@CreamAle]

Technology is just improving now that the domestic market for printers was opened up a few years back with the cheap SLA printers starting to become the norm due to cheap screen technology.. only expect it to remain the same or improve. Fdm printers still have their place after spearheading the 3dp at home market, but just not high detail models. they're great for making armatures, terrain, etc. But you'll have a lot of work to smooth out print ridges and all that.

[@thenathanimal2909]

Bought a Photon Mono 6k ‐ The quality is insane. Printing a Wraithknight for $5 that looks better than the GW is gratifying beyond belief

[@malcomnotinthemiddle343]

For anyone wondering, this can be done even cheaper as he purchase the files. Also if your criminal like myself, you can find 1:1 copies of the original models. That is if you can grab them before GW removes them. Now people please please please sell your GW models, buy a printer and go crazy. This video and others like it should be a testimony to how much GW has been ripping you off. A $200 printer gives you equal quality as GW plastic when you’ve dialed it in. If we can a start a movement we can get both more people into tabletop wargaming (ie printing models for friend who dont think 500 armies are a worthy investment) and get GW to lower prices.

[@absolutfx]

Games Workshop lawyers will be sending you a cease and desist and opening a store right across your house.

[@BadgerLovingFluffster]

Stunning pj on these Pete. Simple but super effective. Might have to knick that for my HATE models... I think it would suit the tone of the graphic novels perfectly

[@TEM006]

Thanks for posting your settings! I'm thinking of getting into 3D printing miniatures, and those might make a good starting point for me.

[@BarokaiRein]

It's absolutely insane how quickly 3d printers pay themselves back for a wargamer or just a miniature painter. My first project was a 4 mega gargant army,I got models that I VASTLY prefer over the GW ones,files and resin costed me maybe 50 euros at most combined and boom,army worth 600 euros right there. Meanwhile my resin printer ''photon mono'' as well as wash and cure machine were both bit under 300 euros combined during a sale,so after printing just 4 models I was basically 250 euros in the green. That was few months ago and right now I'd be well into triple digits in savings.

[@PeteTheWargamer]

Most definitely! I also think the time saving is something that is often overlooked. The actual effort that you put into printing and building those giants was probably drastically less time than building 4 Mega Gargant kits. Incidentally, a 3D printed Sons of Behemat army is something I'm currently working on too!

[@michaelsorensen7567]

Would like to see an actual evaluation on that, at average wages for the area/day job industry.

[@Steventrafford]

Pete is so inspiring. Just watched his Lion to Curze conversion. Just outstanding

[@unpaintedleadsyndrome]

I think we can safely assume you didn't sign the NDA :-)

[@PeteTheWargamer]

Haha, well deduced.

[@HeadHunterSix]

@@PeteTheWargamer No better way to make that clear - well played!

[@IronRhino73]

Just started follow your stuff Pete. I've recently gotten back into painting after hanging up my stuff back in the 90s. I don't play anymore but I have started painting again with my teens. I will say that being able to kitbash 3d models is quite satisfying. Chitubox, Autocad Meshmixer, Microsoft 3d Builder. I use the 3d Builders feature emboss to create custom icons etc from png files. So shoulders with Chapter icons of my choosing.

[@craiggoetz8544]

A tip for gluing your resin prints: Dab a little resin where you would the glu, then hit it with a UV torch for a few seconds. A quick bond as strong as the surrounding resin! Same technique for filling gaps in multi-piece figures: Dab resin in the gaps, hit it with the UV torch. Dab more resin, hit it again. Build up the resin in the gaps and it can be smoothed and sanded right away!

[@geronimo8159]

Yeah Chaos is pretty much ideal for 3d printing... great and clever way of painting as well 👍🙂

[@masoncarter1710]

You've done such a simple scheme but it works so well. Looks like they're standing over lava in the moonlight.

[@13Robzilla]

Adding a step of soaking in hot water for about 1-2 min or so will make removing those supports a true pleasure.

[@ribbon_dye]

Not sure if its been said, but one thing you can always do to get variance in your models is kitbashing. You can modify the files and splice together bits from other models before you even print them.

[@fatmork834]

You should turn tgis into a series where you print an army for every faction

[@slimjim7411]

I got a Flashforge Foto 9.25" 6k printer for $269 and use Sunlu ABS like grey because it's strong and cheap $48 for 2000ml. The two combined I can save enough printing a army in a weekend to pay for the printer and the resin. Also the ability to kitbash with 3D Maker is awesome.

[@dougpridgen9682]

Bestiarum now has extra arms bits with weapons, extra heads, shields, and so on, for customizing and kitbashing their models. Every monthly releas comes with them.

[@j.rivera1974]

Just stumbled on your channel and am really liking your content. Buuuuut we really need an army wide shot of this beautifully crafted army! Can you provide some?

[@MLiskindagay]

Rincewind? I see you are a man of culture

[@grimnir8872]

I like how 3D printing people always without a shadow of a doubt choose the armies that are already really easy to get third party or cheap second hand minis with, or those who can be converted at a fraction of the price.

[@linguinibros.productions]

Which armies would you like to see printed?

[@robertcampbell1170]

A lot of us don't want GW miniatures? I want all of the models that I buy from artists, they aren't a stand in for GW.

[@ger5956]

Use some of the 3D resin and a uv torch to fill gaps, works great and offers a super strong bond!

[@oneluckyraven7268]

This was great! Perhaps some chaos dwarfs next? The paintjob looked fascinating.

[@PeteTheWargamer]

I'd love to do some Chaos Dwarfs!

[@BooooClips]

That black resin looks nasty

[@ironreed2654]

I always find these conversion look best when you add one or two recognizable GW parts, like pauldron's or specific weapons with the 40k stuff.

[@ChrisfrmOhio]

the detail you speak of as the difference between plastic and resin models is all in the sculptor who makes the 3d file I assure you, my entire army is leagues above in detail anything Games Workshop has ever put out

[@Visigoth_]

GW has taken a dump on their fan base for far too long...

[@drrhino_]

Amazing work man, been wanting to try a coloring style like this for ages and you put the fire under me.

[@torymiddlebrooks]

I think scaling up the demon Prince would have been dope!

[@mitchell4745]

Amazing video, amazing commentary you deserve more subs🙌🏻

[@joltuk]

Great video! Loved the quick paint scheme

[@Pers0n97]

Do you heart that GW? The the decades and decades of disenfranchising your consumers with worse and worse business practices that are FINALLY going to pay off. Your time is up old man, I hoped it was worth it.

[@Bluecho4]

Is Archaon's three-headed mount going to get a rider in the future?

[@FelisMachina]

I prefer plastic kits and also don't have space or money to invest in good 3d printer in one go so I stick to stuff that I can buy in my FLGS but I am not suprised that due to the recent GW business practices more people go for 3d printing. I just wish that instead of this killing the company (would be a shame if all that lore and setting go for the likes of hasbro) it will make GW change and respect their customers.

[@gabojill19]

Considering most of that 100 went to pay for expensive models it isn´t all too shabby. Depending on your luck/patience you can get a whole fireteam for about $10.

[@darioscomicschool1111]

Thank you so much!

[@ChristianNiegemann]

only have a "regular" 3d printer, a flashforge, so it isn't really good at really fine detail but with a base, torso, and legs STL, I use it to get additional model out of Tau Fire warrior boxes, given how much extra bits there're in those boxes.

[@brokenheroics8223]

Man, great video and I love this technique. Thanks for sharing.

[@Smilomaniac]

Archaon by himself is most of the price of a resin printer. Put the elite horse unit on top and you're there (at least here in DK). I bought the 'start collecting' StD box a while ago and thought I'd make my first AoS army, but man, those top kits are ludicrously expensive. Not to mention that Archaon is stupidly big and difficult to transport. Are you sure the files aren't just 'printer proof' and have a bit thicker detail for security? I've seen some pretty sharp prints from other channels. Outer Circle did a few videos and the ones he printed were more detailed on what looked like a cheaper resin printer.

[@PeteTheWargamer]

Quite possibly, there are some very intricate models out there for 3D printing. I totally agree with your comments about transport though, I'd prefer to have chunkier, less detailed models if it meant I wasn't running the risk of everything breaking as soon as it left the display cabinet.

[@yagsipcc287]

I print at .03 layer levels when printed it is perfect, it does take a little longer but worth it, also depending on the resin used, exposure times etc... Also the newer printers are better the new 4K printers are the same or cheaper then the 2k printers when they first came out at an affordable level.

[@Paarthurnax_9827]

So far I've printed about a grands worth of nids for a little over £60. I have no intention of stopping there lol

[@Grigorgale]

I kinda have this love hate thing going for you right now bro. I really don't want to spend the money to have an Airbrush station but OMFG I need one now to do a Korn Demon army like that.

[@joshhollinshead2190]

*No GW Products were harmed in the making of this video*

[@speedhump231]

I have almost finish 3d printing an Epic Steel legion force. Using free files, some i have edited to add details etc. It is a great time to be a wargamer.

[@annoyingrequirement]

+1 for Monument ProAcryl 🎲

[@Abraleo]

Added to my favorites, great video :)

[@ThatMuricanGuy]

GW Lawyers watching this video to figure out a way to send a C&D.

[@calthepal312]

Turning up to the tourney with my 3D printed army and printed out pdf for the rules. Of course painted with non citadel paints.

[@shanepatrick4534]

I printed up a Sklavem Army with the WHTW2 3d files. They look amazing and the only one I don't have is the doomwheel.

[@Agentgraves66]

On some multi part printed minis is is better to glue together before the final cure. Helps with gaps.

[@sev2067]

really need to buy an airbrush - thats looking gorgeous

[@TheDarkChaplain]

Uh-oh. GW isn't going to be happy about this.

[@michaelsorensen7567]

...and? They can either sue all their customers into oblivion or accept that it's gonna happen. 🤷‍♂️

[@charlesman8722]

@@michaelsorensen7567 or embrace it and name their own printable files. Adapt or die

[@yagsipcc287]

@@michaelsorensen7567 yeah they do not own miniatures, they do not own armour, they do not own horses, they do not own sci fi or fantasy.

[@joeturner2815]

Damn, looks like I'm getting a 3D printer. Now how do I sneak it past the wife....?

[@yagsipcc287]

The fact it will save you hundreds if not thousands over the next couple of years 😅

[@SuperEagle112]

My buddy and I just bought a 3-d printer and UV cage. We are cavemen and are still printing our proxies for our 40k armies. The tone of GW is fast approaching an end in my opinion.

[@naugladur8534]

What do you mean? What has happened in recent times? Thanks

[@SuperEagle112]

Just the extreme prices. I know GW kits are awesome and very inventive. But spending that kind of money is incredibly financially irresponsible.

[@naugladur8534]

@@SuperEagle112 Right. I agree that the items have a high price tag.

[@BlackCadian]

Really cool, thanks for sharing!

[@NielsBeier]

Great video as per usual, Pete!

[@cormacsmall9442]

Awh man, I have a mars 3 pro, and while I love the quality I get, looking at you working with that large build area in the slicer makes me so jealous.

[@TheAncientOfRites]

Sameeeeeeeeee, It really hurts when I’m printing fucking chaos knights

[@Ammonitemare1711]

That demon prince is just 👌

[@garregalen83]

More 3d printing videos

[@Thesavagesouls]

I'm not even into figurines and this makes me want to 3d print.

[@123JWhyte]

I keep looking at a 3d resin printer but I had a bad experience with the plastic one and now it sits unused but a resin one I could use for more than wargaming miniatures

[@christopherpeery7436]

This is hilarious. I just bought a 3d printer too! Im done with gw. These last few recent controversies were the last straw over many many years of being taken for granted by them

[@fbussier80]

At this point, the community should just make their own rule books and take back the 40k universe. GW can't even judge themselves what 40k is, may as well do it ourselves.

[@presticles00]

But but where's archaon??? I see his mount but no archaon... hahaha joking I've gotten into 3d printing an I love it so much for wargaming hobby

[@carbondragon]

I heard about GW's rules before ever actually seeing Warhammer. While I bought some kits for other purposes and a couple of GW self-contained board games, I'd never actually play Warhammer (original or 40K). I tend not to play in tournaments anyway but it seems pretty greedy. Nice job on the models. I wish I had that kind of talent.

[@MonstrousHandbook]

talks about rincewind, you got a new sub my friend :)

[@spaghettigag1376]

That’s rad

[@jimi1701a]

Great job man the army looks great. 👏

[@sigspearthumb9574]

I love rincewind great character

[@lovelyhurlin6494]

I'm imaging Patrick Bateman narrating this video.

[@shauntaylor9251]

I can't see why so many people use green stuff to fill gaps when milliput is so much easier to use

[@carlstanford7607]

I just discovered your channel and am delighted by your videos. Thank you for all this awesome stuff and cool models. Great stuff Pete

[@Reds_Scrapyard]

you could have filled that gap with gel superglue sprinkled with baking soda