4/0 Copper Cable Flechette Rounds - Tested

We test out some unique slugs made from large industrial wire. We show some of the hiccups we had trying to make these work, but finally got them working perfectly. Thank you Dave for submitting these for testing by contacting me on Facebook.
Thank you Patreon Supporters!
www.patreon.com/user?u=3751733
Featured music:
• Brandish - Warrior Rep...
AND! be sure to check out Gregg's own channel!
/ @ogsdangershow

[@taofledermaus]

The tape used to bulk up the slugs did two things. First it allowed better engagement with the rifling but it also squeezed the bundle of wires together much tighter and helped to keep them from being shoved out of the insulation.

[@grimreefer8561]

Great, I guess you will be storming the capital all over again!

[@derekst.laurent5768]

I haven't finished the video but a cool idea might be to score or split the cable jacket like a sabot.

[@scottstokes1878]

when prepping the slugs maybe a lil epoxy down the tube to keep the flechettes from immediately separating?

[@ferrofeles2063]

@@scottstokes1878 idk i think that they are fine with the tape too much epoxy and they would just act like an expensive slug

[@ferrofeles2063]

@@grimreefer8561 i doubt fledermaus stormed the capitol in the first place secondly im fairly certain your just a troll looking for attention sadly the only kind you will receive with idiotic comments like that one is going to be negative dont you know a good portion of those who stormed the capitol were blm and antifa members ?

[@kj3n569]

I tried to resist, but... Ohm my.

[@worldtraveler930]

Oh how Droll.

[@riverlee1265]

Watt a lame joke

[@andyreid7274]

Well played sir

[@jasonleejames_official]

Ohm eye.

[@CAPSLOCKPUNDIT]

@@riverlee1265 yeah the truth Hertz.

[@antoniobeltranthesumosnipe8634]

The amount of jiggle, wobble, expansion and return to shape of the gel captured on the hi speed camera is impressive.

[@Metal_Master_YT]

the _hello_ speed camera...

[@daltonschwartz8825]

@@Metal_Master_YT looks like rosie o'Donnell jumping

[@matchesburn]

"Do you want slugs or flechettes?" "Yes."

[@thankfullyredeemedmaderigh7436]

Best.

[@owlychan5029]

Aight hear me out, hollow point slugs

[@blueberrysunnyd]

@@owlychan5029 they exist lmfao

[@chrispbacon8462]

😂🤣

[@shootymcshootfacekoff7972]

@@blueberrysunnyd okay hear me out, enriched uranium slugs

[@megan00b8]

The longer range and accuracy of a slug, that shatters into the tearing effect of a multi projectile shell. I love it, but I'd hate to be on the wrong end of a gun loaded with these.

[@michaelkannon8243]

Those invading copper strands would short circuit and crosswire lot of functions. You could raise your arm and end up taking a piss.

[@foxboiunknown320]

They say its shocking

[@Crazyclay78YT]

shit, i would hate to be on the wrong end of a gun period

[@megan00b8]

@@Crazyclay78YT Yeah, but if you had to pick between guns, this one is an absolutely awful pick.

[@Burnt_Gerbil]

As a Utility Designer at my local power company, I approve of this content! 😬👍

[@taofledermaus]

Boom!

[@tobycooper9218]

As a warehouse worker who works with those cables, I also approve.

[@kylem8992]

As an electrician that runs this kind of wire I also approve.

[@Aldarion65]

as someone that loves to see shit get shot I approve of this :)

[@cantsneedgaming4591]

@@kylem8992 MAKE SOME and do some tests if you can

[@travissmith2211]

Just saw the notification. I'm sure this one will be well grounded and electrifying.

[@seraphim2525]

I'm...shocked, by your comment sir😂

[@hkguitar1984]

Given past episodes these comments are well grounded.

[@Jesse-gr3jq]

Ha

[@rhubarbpie2027]

Current events might have inspired these amped up loads.

[@COIcultist]

Glad Jeff and company have so many great places to shoot, I'd hate for them to become Ohmless. Come on laugh resistance is futile. If you think the joke is poor have a go telling it yourself. After all the basic premise has potential.

[@thelastnoise9210]

As an electrician, I find this very interesting and hilarious.

[@taofledermaus]

thank you!

[@jasongulbranson3111]

Agreed

[@spencermeeks9749]

I hope you're Catholic.🤔😑

[@helpabrothawithasubisaiah5316]

@@spencermeeks9749 everyone's at least a little bit cath

[@jeffreyflynn9106]

30 inches of it makes a nice baton too

[@joeseabert8391]

What amazes me is after all these years you still manage to find new things to accelerate. The education is really valuable during projectile shortages. I really do enjoy watching the slow mo.

[@johnsegertsons2143]

9 out of 10 glaucoma patients agree , that is the clearest ballistic Jell they've seen

[@easyascherrypie]

*glockoma patients

[@stevenjennings197]

I see what you did there....

[@ThePlthompson]

@@easyascherrypie lololol

[@billybenson2652]

Lol

[@MrMigido]

I'm certified blind on line and even I didnt see it.

[@Mustang7120]

"How did he die?" "It appears that he suicided through a construction site at an extreme rate of speed."

[@mylesmiller5979]

Lmmaooooo “extreme rate of.....speed”

[@thomasdillon7761]

I'm a retired electrician. That was mind-blowing. Literally,

[@justincase5272]

"It just bulged..." "It stopped it..." That bulge was large and fast enough to cave in a human skull.

[@alumpycow6694]

I was gonna say, your frontal lobe would almost definitely be completely destroyed.

[@alumpycow6694]

@Another Wacko If you mad no extreme brain swelling of some sort lol

[@paavobergmann4920]

@Another Wacko No. You could not. Or, well, of course, you could, but....like the guy who was bludgeoned to death with a baseball bat.

[@kibukun]

Actually, helmets tend to have some empty space between your head and the surface, usually half an inch. That could very well be survivable.

[@RmfDiz]

@@kibukun nah, fam. Whoever takes that shot is dead af like 9.9/10 times.

[@Tpanda85]

‘There’s warmth in this fuzzy hole’, might be the last thing I expect to hear at a range

[@Lilmickcrocodiledundee0001]

LMFAO 😂

[@chrispbacon8462]

😂🤣😂

[@custink22]

Lol then you are at the wrong range my friend...

[@nazarderkach9320]

Probably not if you are in Florida.

[@saltymcnuts1697]

That would definitely be a life changing round if you survive. Surgeon is going to need therapy after working on you.

[@Invigoratingforce]

Hunchback of nordam

[@Thegreatclamslamof93]

@@AA-69 r/cursedcomments

[@couplemonkeys1429]

@@AA-69 going up by what, 75 cents?

[@Libertyprime2]

@@AA-69 I'm about to get a lot of doctors rich... For legal reasons this is a joke

[@melittlelad]

😂 😂

[@xccghvbno1063]

It's pretty nice to be able to have the one round breaking up into multiple pieces that hit at different times gives you a significantly better chance of actually getting the target

[@darrenstettner5381]

I actually think it’s pretty sweet when the round separates. As long as the target is close up, that’s a mean spread of some nasty looking projectiles.

[@demos74dxs]

OG: " 'Insulation' keeps you warm in the winter!". 😆

[@brahtrumpwonbigly7309]

This messed me right up

[@kayrosis5523]

Texas didn't like that.

[@nazarderkach9320]

Especially if it's not very good. 🔥

[@collinblatchford]

@@nazarderkach9320 So true

[@DR_Neal_Rigger]

Awsome.. the amout of stuff that can be fired from a 12 gauge is truely limitless..

[@juhajuntunen7866]

If there is hole, there is way.

[@DR_Neal_Rigger]

@@juhajuntunen7866 That's what she said.. (Sorry.. I'll let myself out)

[@dionysusincarnate5713]

Especially with the Diablo 12ga pistol. It's blackpowder, so it makes it easier. No shell 😋

[@houstonbaxter5537]

I recently found this channel a couple days ago and I swear I've watched 40 of their videos already. Great content and well produced. Keep it up you guys!

[@taofledermaus]

thank you Houston

[@DK_6.5]

Soldering the base end of the copper wires would have been interesting to see what effects that would have produced 🤔

[@DeandreSteven]

A.sort.of reverse mushroom

[@DK_6.5]

@@DeandreSteven ..., if the base is soldered it should mushroom quickly and disperse energy fast... in a rifled bore it should be accurate

[@Junior-eq7gb]

I want to see it happen

[@vidard9863]

it would also be interesting to see what would happen if you soldered the tip. theoretically it could help keep it together in flight, add a little forward weight to stabilize it, yet disintegrate on impact....

[@DK_6.5]

@Vidar D It definitely would help with the factor of over penetration. The slug would stay together at midrange without peppering surrounding area with shot or buckshot. this would effectively extend the range of a shotgun around the neighborhood

[@flhusa1]

maybe solder the back end of 1 and try soldering the front end. would stay together till it hit then maybe shred the target.

[@chrisgabbert658]

I was thinking jb wield on both ends 🤷‍♂️

[@CountryRock2k1]

I was thinking just solder the back end and see what happens.

[@roberthenson6153]

A few drops of cyanoacrylate glue. Just to give stability during acceleration.

[@Eatherbreather]

I'm thinking melted wax might work to help hold them together. Or hot glue?

[@ScottKenny1978]

@@andytuesday500 the point is to have the wires pop at some point, though, not cast into a solid block.

[@rgbok5453]

What I learned from this channel: you can shoot anything out of a m͟a͟s͟s͟ a͟c͟c͟e͟l͟e͟r͟a͟t͟o͟r͟

[@mikedrop4421]

Mass accelerator.

[@rgbok5453]

@@mikedrop4421 you're right. My bad. It is 2021 after all

[@frankberry6220]

I'd pity any surgeon trying to repair a wound caused by this type of warhead.

[@DL101ca]

You mean mortician ?

[@frankberry6220]

@@DL101ca I'm a glass half full sort of guy.

[@somelaser5906]

Warhead. I like it hahahaha

[@frankberry6220]

@@somelaser5906 Thankyou kindly.

[@Flyboyminer]

As a novice surgeon on my sister's Barbie dolls and random dead animals... I'd say any surgeon trying to repair a wound similar to this is drunk and needs to go home.

[@fishing_with_chaz]

Looks like a decent round when lead is scarce all the electricians will have ammo 😂😂😂😂😂

[@user-ef4gf7rr9r]

In the Reset World, gun guys will be competing with meth heads

[@mgelliott86]

Yeah but where would they get the primers

[@user-ef4gf7rr9r]

@@mgelliott86 Book store, education section

[@kyle18934]

@@user-ef4gf7rr9r oh my gosh thats amazing hahahaha 😆

[@_EllieLOL_]

@@mgelliott86 crushed strike-anywhere matches make good primer (will damage gun, clean after use)

[@IamSPEED-vy6ii]

Everybody gangsta till the construction workers use cables as ammunition.

[@chrispbacon8462]

😂🤣

[@jesuschavez2260]

This is hilariousssss

[@anarcho-savagery2097]

ATF is baffled.

[@buttrnuttr2291]

One time my dad and I was going through a cul-de-sac that our construction company did the ground work for. As we were driving pass the houses being built the carpenters on the first four houses were shooting their nails at each other, we could hear and see the nails flying across the road.

[@tjlovesrachel]

@@buttrnuttr2291 did ya get a flat tire

[@FlatWaterGuerrillas]

I’ve worked as an electrician for about 3 years. Came across a lot of short pieces of 4/0 like this. Always had the idea but wasn’t able to test it myself. Glad to see you guys try it out!

[@davidmcguire6043]

Pro tip: A peice of 500 copper THHN about 3 in Long is better than wrapping your fist around a roll of quarters.

[@noname-xo5mp]

"that's exactly what I said, insulation. Keeps ya warm in the winter" 😂😂😂😂😂

[@BD-11B_OIF-1]

That was awesome! I was amazed at how well you guys had it failed in by the end, with a little bit of electrical tape to add just enough to the width and a rifled slug barrel. I think that is an outstanding option for a homemade flechette rounds.

[@taofledermaus]

thanks Brian!

[@BD-11B_OIF-1]

@@taofledermaus I just reread my comment and apologize for sounding like an uneducated idiot for the poorly structured first sentence. However, I am pretty sure that you guys understood what I was trying to say about it starting out at failed attempts but then the addition of an electrical tape and rifled slug barrel and became a quite formidable defense weapon if needed. In response to your "thanks Brian!" comment, you are very welcome. I did really appreciate watching the demonstration of that improvised round and the process of improving it. I do not currently own a scattergun, so I will not be loading those rounds do defend my own home, however, I do have friends who do. So, I will share this with them. Thanks again.

[@jeremyshackelford8080]

After pulling thousands of feet of the stuff, I too am glad to see it shot! Fine job fellas

[@taofledermaus]

Ever need to use a truck to pull it when the tugger couldn't handle it? lol

[@coldcupofjoe6963]

@@taofledermaus I've had to tie one end to a boom lift to pull some slightly smaller cable down a cable tray. That was fun.

[@jeremyshackelford8080]

Yeah buddy, except it was an old Clark forklift that did the dirty work. I was constantly washing the wire lube off old green

[@chiriematthieu]

"Fancy drone shot, just because" Well that may describe 90% of drone shot on youtube and the reason most people buy a drone.

[@frogz]

....they didnt shot the drone though :(

[@jamesledford5900]

its amazing how simple it is to turn anything into an effective round (simple if you have any experience and the ability of time and access to a safe place for testing) im glad i found this i love the science behind everything you show

[@joshuahmitchell873]

I used to know a guy that did his own custom shotgun loads for shits and giggles... my favorites were probably then 3.5 inch magnum shell stuffed full of penny's, and the solid steel slugs he turned on the lathe. Fun times... Edit: Oh yeah he also shoved a bunch of roofing nails in a 10 gauge.

[@housekilla457]

I see that once again when accelerated to velocity, mass has significant force.

[@barbedwire83]

The results of this round when it flies correctly are horrifying..

[@Pyr0531]

Seeing that in high speed has made all the work and R&D I have put into this worth every second. The best for last was an understatement.

[@jesusllanas9318]

@@Pyr0531 soon people will be able to 3D print these........ god I love America

[@deldrinov]

@@jesusllanas9318 3D printer would be overkill for making something like that. If you don't have access to such high duty cables, just get 19 short nails, cut heads off of them, pot them in wax or weak glue just to have them hold cylindrical shape + lower turbulence at the front and wrap it in electrical tape to fit the barrel.

[@jesusllanas9318]

@@deldrinov meant 3D printer to help stabilize the rounds or at least give them more predictable flight paths

[@bakerboy8910]

Well, now I know what to do with my service entrance cable trimmings

[@DrumJay17]

Now I’m wondering if there’s a wire gauge that fits well in a 20g shell….

[@techfixr2012]

.625 inch is close to 20, depending on choke.

[@imgrindin]

Fuck man I remember when Tao had barely any subscribers a ways back. About time it's doing its thing. Honestly the most consistent video style on youtube.

[@thateffinguy2422]

I was just working with this exact gauge of copper today and even brought home several pounds of it for scrap 🤔😂

[@brahtrumpwonbigly7309]

Use this one easy trick to strip your heavy guage wire! Scrap recycling centers HATE him!

[@Pyr0531]

That is exactly what I did. I sent him 30 of the rounds to test with. I have a bowling pin that took one perfectly and I need to get xrayed.

[@mattkissmyasstyrants8676]

@@Pyr0531 great idea. I'm gonna try working up a good flying load of this. I'm thinking of soldering ot on both ends like many have commented.. should hold together nice until impact.

[@thateffinguy2422]

@@mattkissmyasstyrants8676 i wonder if JB weld could be a simpler solution

[@mattkissmyasstyrants8676]

@@thateffinguy2422 probably would be better because no heat involved.. using jb welds wouldn't melt the insulation.. 👍🏻

[@RealWunderBanana]

That skin tag joke made me laugh so damn hard.

[@mattkoethe6691]

This channel's content is always so thorough in proving it's results in science before being released! I recommend it to all my pupils when they need an overall accurate physics test thing! I have a PhD in pupil physics and accurate overall channel tests.

[@user-bz9ld2go3g]

One of the best video I’ve seen. No wasted talking just doing it.

[@Fred_Bender]

I have some of that cable from when I was an electrician .That's where I got the name flex bender(rookie name,long story). I keep the the cable for use as a heavy baton .

[@antoniotorres3754]

What a beautiful day in California. Hard to find skies and terrain like that anymore. Awesome drone coverage, video quality was superb. Thanks again for all the hard work making these videos!

[@taofledermaus]

thanks for the kind words Antonio!

[@135Fenrir]

I am curious as to how they would perform if they were packed in as an aerodynamic slug with longer ones as a core and shorter ones on the outside, making a cone kinda like the old russian rocket pods for aircraft. Would that improve flight stability and separation on impact, or decrease the integrity upon firing so it all just scatters out the barrel?

[@jakeapplegate6642]

“There’s warmth in this fuzzy hole.” Lol You guys crack me up 🤣

[@4d4Spl]

I've tugged enough of that stuff in my day. Glad to see it put to better use.

[@t.r.4496]

500 mcm isn't nothing to that 4/0. Bend that shit in a box I know it should have looked as big as a refrigerator but was the size of a 48 cooler.

[@BillB23]

Having swung a hammer for 20 yrs I'd like to see them work up a load with 8d finish nails or the like. Or perhaps 5d box nails alternated like .22LR in the box?

[@emperorpawpateen.9992]

Thats what she said

[@KODArunner]

Now that would make a great home defence round! You'd have no worries about over penetration even if the round came apart in mid-flight. In fact, having it come apart may be a more desired outcome. Keep up the good work and may God continue to keep all of you safe!

[@loganv4982]

13:12 he saw his life flash before his eyes and tried to be slick about it😂

[@jpdesimone]

I know all of you are thinking it... That ballistics gel is the nastiest block in existence on KZbin. I've seen cleaner gas station bathrooms. Just joined your Patreon, by the way. I get more entertainment here than I do from any television program I ever watched, so you deserve the support. Hoping one day you have enough paying supporters to replace the sewage blocks. LOL

[@warrenharrison9490]

They just need to run it through filters. Would be nice to be able to see thru it.

[@taofledermaus]

thank you Joe!!

[@knobjob2839]

OG gave that helmet so much finger action. So aggressively too.

[@kctyphoon]

those slow motion shots are simply amazing.

[@prooxy1234]

Of all the firearm channels i watch you guys get the most likes and some of the others have 10's of millions subs(they been around a long time) Im truly convinced that us viewers love most is seeing the super slow mo shots which some how you guys are the only ones that bring it to that level.. thanks

[@taofledermaus]

thank you very much!

[@Zachmman1997]

The discount version of “rods from god”

[@joeslouie489]

Nah you would have to make the slug out of tungsten

[@ianfinrir8724]

The Dollar Tree version

[@jerryjantola]

Rods from the house elf

[@user-me7xe5kl6t]

Sticks from hicks? Tines from the lines?

[@jeetjepard1633]

The Rods From The Thrift Store

[@waynesligar5948]

Man i love watching you guys I'm laughing most of the time, officer Greg sense of humor is awesome

[@DomDomPop]

Man for a second I thought you were gonna blow the drone away in the intro 😂

[@christophernayar6543]

Wow that head shot! Went right in with a large wound track, and after a couple inches of penetration then it sorta “expanded” out and turned into many smaller tracks of damage. When you make it to only break apart after impact then you have something more brutal than a hollow point

[@RCScaleAirplanes]

Awesome 👌🏻 Great video as always. Thanks for sharing 😉🤙🏼

[@taofledermaus]

Thank you very much Horst!

[@Sableagle]

@@taofledermaus Custom round request: an ounce of Airsoft BBs at UK-legal velocities. Law says up to 1 Joule full auto, up to 2 Joules other weapons. Table of weights and 2 Joule muzzle velocities follows: 0.12 g = 1.85 gr @ 182.6 m/s = 599.0 fps 0.20 g = 3.09 gr @ 141.4 m/s = 464.0 fps 0.25 g = 3.86 gr @ 126.5 m/s = 415.0 fps 0.28 g = 4.32 gr @ 119.5 m/s = 392.1 fps 0.30 g = 4.63 gr @ 115.5 m/s = 378.8 fps 0.32 g = 4.94 gr @ 111.8m/s = 366.8 fps 0.36 g = 5.56 gr @ 105.4 m/s = 345.8 fps 0.40 g = 6.17 gr @ 100 m/s = 328.1 fps 0.43 g = 6.64 gr @ 96.45 m/s = 316.4 fps For air rifles, we're restricted to 12 ft-lbf, because that law was written before we went metric, and I've seen a tin of 8.6 gr .177 pellets, so that's approximately US BB size and that means a muzzle velocity of ... how the hell do you work this out in imperial? Ugh. 12 ft-lbf = 16.2698 J, and that's 8.75 gr = 0.56699 g @ 239.56 m/s = 785.965 fps. There. One BB pellet at slightly more than .45 ACP muzzle velocity is legal. Can you hit some things with BB shot at that speed, please?

[@fakejohn4714]

@@Sableagle I want to be your friend lol. Here in the UK aswell, having similar questions but lack the know how to figure them out

[@rexsterlingbuchanan2929]

Before even getting five seconds into this video I was like oh my God this is got to be super dangerous and extra good! I can't believe nobody ever thought of this before

[@Pyr0531]

Your welcome

[@TheTubejunky]

Next up Fishing hooks and sinkers! Seriously tho try this!

[@135Fenrir]

lol that's basically what blunderbusses fired. Its very old tech given a fresh coat of paint.

[@maxim0666]

Interesting information for emergency/homemade ammo. Thanks for testing and sharing it.

[@ryanjones7681]

On today's episode of: "What can we shoot out of a shotgun"

[@phillhuddleston9445]

"shoot out of a mass accelerator".

[@peterfinland1370]

Some poor hungry North Korean soldier could've eaten that "ballistic gel"! You stole his field rations and shot it. What a terrible waste.

[@Sk1m_Beeble]

@Robertino Tanos The joke. You.

[@gregbrooks3577]

@Robertino Tanos You don't get sarcasm do you?🤣

[@mistersomaru]

*whoosh*

[@militaristicsoldier856]

@Robertino Tanos the joke is that North Korea is poor, and that the populace eat dirt for they have no food. It is even more humorous to declare that clay would be in the average military ration as a replacement for more staple food as they have no money nor food to give to their soldiers

[@gregbrooks3577]

@@militaristicsoldier856 Yeah, he still doesn't get it.🤪

[@arielkozak]

Fun fact: scrap copper is $3.52 per pound here in jersey, about to see all time high this year

[@taofledermaus]

So 16 slugs for $3.52. That's a pretty good deal.

[@Pyr0531]

@@taofledermaus those were my thoughts also but it is running around $1.85 here in KC

[@skydiverMN]

Watching you on Rumble now, thanks for jumping on that platform!

[@laraestirn6848]

Thank you for the instructional video on the Crosman DPMS bb air rifle. Love this gun, mainly because, like you said, it has the look of an AR. I shot this gun last year, really enjoyed it, and bought the same one. Loved the rapid fire! Can't wait to mount the 1X30 tactical dot sight. Looking forward to more videos, and can't wait to print-out your targets.

[@azafreak]

These loads are savage I bet it really hertz

[@gerardmourits8709]

Ohm my god can you not

[@commidore4499]

I see you are getting some ..... resistance.

[@baomao7243]

@@gerardmourits8709 ... Yes he DID !

[@brahtrumpwonbigly7309]

Getting shot with one of these rounds must be a truly electrifying experience.

[@mattkissmyasstyrants8676]

Don't be so negative y'all.. if you can't be positive try to be neutral.

[@Cod3Thr33]

After your banjo playing parachutist lands, you could have him shoot a target made of leather jacket skin, pork steak pectorals, pork ribs, a bag of oranges to simulate lung tissue, more ribs on the back, 4 layers of t-shirt on the front, 4 layers of t-shirt on the back, and the whole thing followed by the new and improved high tech fleece bullet stop.

[@GUNTHER1]

That last shot was freaking awesome, thanks fellas STAY STRONG!!!

[@dubdan31]

Thanks guys for another great video! Keep on doing the top work!

[@BrilliantDesignOnline]

Classic: "she has a flat head so you have a place to set your beer"; the 80's makes a come back.

[@bluephreakr]

Legit surprised with how they carried on, there aren't people yelling out loud for these guys' cancellation because of it. Probably pissed 'em off enough with previous publications to melt away all of the snowflake man-babies.

[@raymondcoderre2256]

@@bluephreakr lol 😂

[@frogz]

@@bluephreakr snowflakes melted already, the guys(mostly, there is SOME female and other tauflederfolks) are laughing along!

[@billallen4793]

Pistol grip ear's and a quarter slot behind one ear to actuate the folding teeth option...lol...from Wyoming USA 🔫🤠🇺🇸p.s stay safe and healthy everybody GOD BLESS OUR COUNTRY AND stop this foolishness before it's too late...

[@joshuagibson2520]

"Nobody's coming. It's up to you." Greatest quote ever. I hope OG copyrights that. If he doesn't I'm gonna.

[@danw.3665]

I love the “fancy drone shot just because” when the video is “just because someone sent us this” 😂

[@jackguthrie1542]

Whoever cam up with this is a GENIUS!

[@uk.teenage.female.clay.shooter]

Gives a whole new meaning to the phrase "Im feeling wired!" lol

[@RCGshakenbake]

👍👍

[@mxecho]

hillbilly neurolink ; "Hey Jim-Bob, im finna git in the Matrix "

[@1337fraggzb00N]

"He's beginning to YEEEHAAA!" - Eugene-Gilbert Morpheus

[@frigglebiscuit7484]

"yee yee, mr anderson"

[@GNP3WP3W]

Love the content. I just want to say that if you mix hydrogen peroxide into your ballistic gel, it clears it up. Not sure if you need 30% or if a bunch of 3% will work but it does wonders

[@solcoster4587]

@taufladermaus listen to this guy!!

[@solcoster4587]

Seriously good tip

[@lucasmclellan8388]

I love how this channel is still the same as it was when they had like 100k subs like goin back in time keep up the good work

[@grants169]

Well you came up with a new faster wire stripper!

[@Pyr0531]

Yes we did

[@vinceofdeath1361]

"Jay Leno approved New Jersey ballistic gelatin" You have to admit the man has a gift.

[@taofledermaus]

Saw Leno many years ago at a motorcycle swap meet and he was wearing that dang denim even back then.

[@EastmansHuntingJournals]

That was insane! Great video.

[@5amH45lam]

_"Bring out the_ [ballistic gel head]" _"The_ [ballistic gel head] _'s sleeping."_ _"Well, I guess you'll just have to go wake him up now, won't you!"_ - PULP FRICTION

[@forteandblues]

Lol great save with “and purple...” so worried about getting in trouble.

[@kevinedwards7206]

I bet the comment go from neutral to positive..

[@numnut1516]

Yeah but then he followed with that beer joke lol

[@bwolfe9040]

@forteandblues Brutal lol

[@life_of_riley88]

The Man Show! I haven't heard about that in 20 years!

[@BcFuTw9jt]

Yeah back when you could be funny and one particular host wasn't a little beta b**ch

[@markmason3981]

Love the art on the jug!

[@ijohhnso6165]

"Banjo from above" was the name of my 80's reggae/country fusion jazz band, take care folks

[@batterymakermarkii2654]

4:36 Reminds me of that line in "Shanghai Noon"--Piss shirt, bend bars...

[@OnlyKaerius]

That shotcup flying into view after the north korean ballistic gelatin was hit was a (photographic) shot of beauty.

[@mkivy]

Thank u sir for the demos. Man was i wrong about the out come? I love my 12 garage. Always had one. Talk about the best home defense. U guys take care and bless u all.

[@struthermartin]

That last shot was way cool. These videos are always fun.

[@ponthis1]

Wow... I never thought about using scrap copper cable loads. You have officially inspired me. Great video Jeff and OG. Now pardon me while I go "not try this at home" lol

[@designworksdw1949]

love how the insulation kept going in that last shot without the copper.

[@danielleimhofer88]

wow that´s amazing! Good work guys.

[@missumenimsatanass]

I saw the guys in Southern Kentucky do this already. Those Kentucky guys are awesome! The rounds they come up with just blows my mind when they end up working great.

[@scottplagmann3411]

And there I was on the verge of wasting money on genuine GI flechettes..... of course with the price of copper not sure which way to go now...lol Never a dull moment on this channel!!

[@taofledermaus]

thanks Scott!

[@bubbajenkins123]

I love it when Jeff shoots his wad

[@Watcher6969]

Me too, especially on the jugs!

[@earlturner6023]

Booooo

[@mattkissmyasstyrants8676]

That's what she said.

[@ethancntower8850]

Into a warm fuzzy hole 😂

[@Slash1066]

At quite some velocity too!

[@DanskerneFraDanmark]

I am glad to see you still do good even afther all this years of not wacthing

[@MADSAHAD]

So we are going back to grapeshot? Mass reactive grapeshot? On a whole other level of pain and damage. Hell Yeah!!!

[@r.kellycoker9387]

"Learning from errors is a sign of intelligence!"

[@phillhuddleston9445]

Then there is no intelligence in our government :(

[@bio3m]

Gotta love the taofleder crew. Definitely the type of people i’d have a beer with.

[@philkearny5587]

The kind of crazy mofos I’d buy a beer for.

[@pyotrilyichtchaikovskyii6638]

Shocking results.

[@dmw1306]

Very good video guys. That last test of the do the gelatin head was great.