Mixcraft 9: New Features

Learn more about Mixcraft 9's new features. In this video, Mitchell Sigman takes us through a short overview of many of the new features found in Mixcraft 9. Learn about curved automation, pitch and tempo automation, detachable/dock-able interfaces, vocoder tracks, audio/MIDI/LFO controllers, enhanced MIDI editing, and more.

[@davethompson2881]

I purchased my upgrade from 8 Pro Studio to version 9 about 8 weeks ago, and it is fantastic. I'm no power user and probably don't use half the functionality it offers but as a user from about version 3 or 4, I'm a big fan. I am always amazed that so-called 'top 10' type lists of DAWs mostly neglect to mention Mixcraft at all. Perhaps they don't like any program that offers loops. Compared to many of those other over-priced programs out there, Mixcraft not only has better features, but offers significantly better value for money. I highly recommend it to anyone who will listen...

[@bigbro4266]

Would I still be able to use my old vst's/ 3rd party plugs... after the upgrade? Did yours work perfectly?

[@davethompson2881]

@@bigbro4266 Yes, all my VST's worked, though in the past I did have to tell Mixcraft where some of them were as they weren't in the standard locations Mixcraft scans when prompted. This time I took the opportunity to put them all in those more standard VST folders and all work without issue.

[@vstfreedownload3106]

@@davethompson2881 does mixcraft 9 recording studio support vst plugins from 3rd parties? because i plan to buy mixcraft 9 recording studio version 🙏🙏🙏

[@anthonythiel2820]

@@bigbro4266 yea all work fine dude go ahead and get the upgrade without even thinking,trust me:)

[@anthonythiel2820]

BUY 9 PRO.its worth getting the top acoustica has to offer,trust me the plugins you get with it and the actual daw,is well worth it.

[@hasanahmad3420]

Pitch is now available as automation perameter 🤯🤯🤯

[@vain3d973]

TEMPO!!???? 😍

[@apothecurio]

OH MY GOD FINALLY

[@TonyDaGreat]

I love Mixcraft! Been using it since mixcraft 5. Thank you Acoustica for creating the best D.A.W and studio recording software on the planet. Mixcraft has come a long way! You guys are awesome! As a artist/producer and fan of music I've learned a lot and accomplished so much with the use of this software and its helped me so much over the years . Thank you so much guys. Stay awesome!

[@saarimkhan921]

Once we buy mixcraft 9, it will be our for lifetime right?

[@TonyDaGreat]

@@saarimkhan921 yes for lifetime .....and whenever theres a new version you never have to rebuy it .....only cost a small tiny fee if you want to upgrade which is totally optional

[@StoriesAndPringles]

Been using Mixcraft ever since I started Highschool; this is the biggest update I've seen personally that makes me want to upgrade straight away. Kudos to you guys, this is great stuff! Appreciate your hard work on this DAW and looking forward to continue using it for my future projects and career.

[@surtaalrecords4659]

Happy new year Congratulations for Mixcraft 9 and new features.

[@acoustica222]

Binny, Happy belated New Year to you as well. (=

[@lyricb.lyriclyspeaking2742]

Started at Mixcraft 5 in 2013 7 years later && ots still the only DAW ive used

[@acoustica222]

That's awesome! We're glad to hear it!

[@anthonythiel2820]

TO ACOUSTICA: i have not read all the comments below but just a few,but i got to say ive tried various daws in the past and mixcraft to me is the easiest to dive into even without any previous knowledge of daws,and have been using it ever since i have first tried it,i just cant go back to any other daw.it is awesome!to me its the best daw out there ive upgraded to 9 pro as soon as i got a notification that it came out,without even looking at the features before buying:)i just dont understand why it is not more widespread and known to the bigger audience.im trying to put my finger on why this is,maybe its the company itself:TO ACOUSTICA: for example the new version came out and by chance i found an email you guys sent me that i can upgrade from 8 to 9 cose you just released it..in that regard maybe more effort from acoustica to push new releases out there to be known more,using social advertising youtube etc.you guys have a great product but really need to focus on advertising it in a bigger way,you have something special here,take advantage of it and do more professional advertising.ALSO do more professional looking tutorials of your latest releases(ex. mixcraft pro 9).You really need to make full tutorials covering everything in the new mixcraft 9 ,use youtube here etc.theres not enough tuts on your latest updates.copy what the bigger companies are doing advertising wise and support wise and im sure you will really take off more than you are right now.people out there need to see your product!! anyway if acoustica read this i hope my 2 cents will help the company grow bigger,cose we users want to see mixcraft DOMINATE the DAW scene,will be good for the continuity of the company and for us users that dont want to use any other daw. BIG thanks to all at acoustica,A JOB WELL DONE GUYS:)keep it up you are awesome!

[@JosephClarke21]

Anthony, thank you. We appreciate it. When we initially release we first like to make sure that there aren't any unforeseen bugs or issues. We are starting to ramp up the advertising. Thank you for your thoughts on the video tutorials, as well. We have more coming...And, in the meantime check out the Fans Of Mixcraft. kzbin.info/door/qsoHeckrv6g542o0vWs_MA

[@anthonythiel2820]

@@JosephClarke21 im really happy to see a response from the company!means you guys are listening to your users which i already knew you do but thank you for taking the effort to reply:)makes us users feel more closer to you and the product and that we matter,which many companies ignore.thanks again for the input:)

[@anthonythiel2820]

also thanks for the link,i was struggling to find tutorials for version 9.hope we get many more for 9 pro:)

[@vmoonlight4962]

Amazing, I love Mixcraft. Keep it up! I am with you forever

[@PluginDeals]

Happy New Year Mixcraft!

[@daveowenmusic1749]

Love the program! Got the upgrade recently and it is easy to see a million improvements. I really like the streamlined interface - big improvement. Mixcraft is not resting on its laurels. Highly recommended! I started with version 8 Pro after Cakewalk dived. Upgraded to Mixcraft 9 Pro. No regrets!!!!!

[@vstfreedownload3106]

does mixcraft 9 recording studio support vst plugins from 3rd parties? because i plan to buy mixcraft 9 recording studio version 🙏🙏🙏

[@acoustica222]

We're glad to hear you enjoy it!

[@StephSancia]

Only a Million ? You obviously haven't opened it up fully to see the Full Monty 😂 I'm just about to go up from 8 pro to 9 pro 🙃

[@CivortepOfficial]

I love 9, this is really next level guys! Great job!

[@acoustica222]

Thanks so much! We're glad you enjoy the update!

[@Jacksmusicshack]

Hey Acoustica Mixcraft! Thanks sooo much for the awesome program JUST UPGRADED TO NINE!!! :) Been a fan since 5 years ago! Gonna keep on using Mixcraft! so easy!

[@acoustica222]

Let us know what you end up creating with 9!

[@AmanSinghMusician]

Upon reading another user's request in bringing in AcidPro paint tool and other similar features & your quick response, i just bought the latest pro version. I will be looking for those updates in future. Thank you.

[@Animegold2856]

Performance View is Awsome for 9 keep up the good work Mixcraft.

[@saneetsmore]

*_For me the convert to audio and the pitch automation parameter are the big changes, doing a great job team mixcraft_* :-)

[@joshemerson4512]

this looks so nice...lots of improvements from 8. i have to upgrade now!

[@acoustica222]

Enjoy!

[@TonyDaGreat]

just upgraded from 7 to 9 today. i love it!!!!!!

[@RhythmicDias]

This is a Happy New Year!!! yeh, lots of new features and new GUI..

[@acoustica222]

We hope you enjoy the update!

[@MerajTypeBeat]

I read about Mixcraft 9 being in the works mid last year, but I decided to randomly google it again today to see if there were any news and updates about it and come to find out that it has been released. Wtf, I didn't even know it was released and got so excited! Anyways, I'll be upgrading to 9 pro once I finish a song. Love the work you all do and your DAW. Keep it up!

[@acoustica222]

That's awesome! We hope you enjoy the upgrade!

[@StephSancia]

I've got Mixcraft 8 Pro and am trialling Mixcraft 9 and I have to say that it's a breath of fresh air and also it's so inspiring to open up the Demo with a really classy sound going on instead of the usual rah rah guitar and drums. I'll probably upgrade but I've bought Cubase 10 and Presonus one 4 Professional and Fl studio etc etc BUT Mixcraft is up there with a product that is really easy to use, full of top notch features, LOOKS FABULOUS and everything just flows so easy. One of my favorite DAWS and it doesn't get the justice it deserves. On top of that the Staff are REALLY down to earth, polite and easy going. All Kudos to Mixcraft \m/

[@acoustica222]

That's awesome, glad to hear you're enjoying Mixcraft so much! 😁

[@anthonythiel2820]

TO ALL USERS : upgrade to 9 pro without even thinking about it guys,its money well spent!you will not regret it one bit beleive me:)also to those that are concerned with plugins from 3rd parties:i got loads ive bought and the upgrade to 9 detected everything as it should:)go ahead and get 9 pro without any fear:)also to those that cant buy extra plugins for instruments,and eq wise,effect wise etc:you dont really need to buy anything else to make great music with mixcraft 9 pro:it gives you a ton of plugins internally for every need you can think of without having to buy a single external plugin,plus a few extra goodies to download and install on top of all that:) ive bought more,but im a vst junkie lol.

[@bearbear2978]

I'm about to buy fl studio producer version, should i buy mixcraft 9 or fl studio producer version?

[@anthonythiel2820]

@@bearbear2978 its up to you.every daw has its pros and cons.check them both out and see what fits you best.i prefer mixcraft due to it being the most user friendliest of all the daws Ive tried.i can dive straight into producing without the learning curve of the other daws.

[@bearbear2978]

@@anthonythiel2820 thank you so much. That was helpful 🙏🏽

[@StephSancia]

I've just upgraded to Mixcraft 9 Pro and like someone said below Mixcraft is HIGHLY UNDERRATED but is just so easy to navigate and use as a newbie especially. Maybe there's a TOP GUN DAW CONSPIRACY from the companies that charge 6 times more for their products 😂 When I bought Mixcraft 8 pro it was the very first DAW I'd ever opened where I knew where everything was and making beats was just so naturally easy to master. Mixcraft IMHO is better than quite a few big names IMHO and for the price as well who could ever complain ? Thanks Mixcraft, You're the BUZZ 🙃

[@MJpodolig]

Wow! iLove it! awesome features @mixcaft! :)

[@acoustica222]

We hope you enjoy the new update! Mixcraft 9 brings a lot to the table!

[@wideyxyz2271]

I shall be upgrading from 8 shortly.....Best DAW out there. Never had a problem and the guys always answer any questions. MC online university is also the best!

[@acoustica222]

Glad to hear the new videos are helpful and that you're enjoying Mixcraft!

[@MikMech]

A fantastic upgrade that's well worth the coin...

[@acoustica222]

Glad you enjoy it!

[@ZacharysGamingExpOG]

I’ve been on 8 Pro for a while, I’m definitely ready for the upgrade

[@jakekirkpatrick1357]

Started on Mixcraft 3 (currently on 6). Seeing those new EQ controllers is an instant purchase for me. Thanks to the new update, going to put a quite a few plugins to rest with this new version lol. Also had a lot of issues mixing down to WAV files in 6 (crashes, freezing, missing tracks or just plain ending up with a blank file). Hopefully it's fixed in 9!

[@lahiproduction2242]

this was first daw i used since 2015 .after 5 years i am a fan in mixcraft .

[@acoustica222]

That's awesome, glad you're enjoying it so much!

[@rockyperez719]

Love this program

[@regulator8275]

I switched from Fruity Loops to Mixcraft and have never looked back. For me, Mixcraft is the perfect DAW 🤘🏻

[@joseph.nicolaus]

finally!!! like it ... bravo!

[@acoustica222]

Glad to hear it!

[@ls37]

I welcome you. I use Mixcraft 9, I really like it. I even teach video tutorials on this cool program. Thank you for the program.

[@kelvisafrohiphop9099]

the drums on standard kits 1 and 2, have been mixed with EQ AND REVERB, how should we mix it when we use,, can we add another EQ again or we we should add compressor only ?

[@0000song0000]

2:50 as someone who studies with an API 1608 (but i obviously dont have one at home) THIS is what I wanted. Something that resembles the "hardware" i know how to use, but without spending 40K

[@AdamFleurant]

It's perfect. I will buy the new one soon. I have 8 Pro studio

[@acoustica222]

Awesome! We hope you enjoy the update!

[@cristinacarang]

How to buy? I wanna buy :( hope you can help me

[@TetFeMal]

You have a truly addictive product. I fully believe in it. I tried everything available and nothing feels as good as Mixcraft. Keep working on bugs and stability because the features are there. Mixcraft has the potential to take on any DAW and not just for beginners.

[@acoustica222]

Thanks for the kind words, we're glad you enjoy Mixcraft!

[@shanemadbossvevo1797]

Wow am still using 7 lol

[@funkster007]

I stopped upgrading a few years ago at pro 7. I'm impressed with this new look and some of the added features. Guess it's time to upgrade again. On a side note, what's the best Interface for Mixcraft? I've been using a Focusrite Scarlett 2in2 for years and it's done its job, but wondering if it's that device causing computer freeze ups and pops. or the computer itself. Other DAWs seem to run more smoothly for me.

[@acoustica222]

We hope you enjoy the upgrade! As for the interface it's hard to say offhand - the Scarlett series are great interfaces for sure but this could be any number of issues causing that. Feel free to reach out to our support team at [e-mail] and we'd be happy to help investigate!

[@bigbro4266]

Oh I'm about to upgrade!

[@acoustica222]

Glad to hear it! We hope you enjoy all the new features v9 brings to the table!

[@user-eb3xs6yd9t]

I bought the mixcraft 8 home studio on steam and daaaamn this program is amazing for its price,I just wish mixcraft 9 will be on steam too))

[@acoustica222]

Glad you're enjoying it!

[@mktgsifu]

This looks awesome! Is this compatible with the midi-controller APC40 MKII and does Mixcraft have a script or a template for it?

[@acoustica222]

Hey there! Most major controller should work with Mixcraft - but if you're finding there are issues feel free to reach out to our support at support.acoustica.com and we'd be glad to check into it further for you!

[@rockyperez719]

Started with 8 trial just got through 9 trial im hooked

[@timetorelaxfocus9642]

Very cool features. I just got 8 Home and looks like I'll have to save for an upgrade. =D

[@acoustica222]

Glad you're enjoying it!

[@michaeltaylor1219]

i've started to get into Mixcraft pro 9 just lately I have Studio one as my main daw, but i find Mixcraft to be very easy to use, feature loaded, and the sound is really just as good as other daws contrary to belief! there is such a snobbery about what software people use to make music. a piece of music is only as good as the person that does it imo. and the price for what is on offer is brilliant too!

[@streetwiserhapsody]

Something I have struggled with Mixcraft is plugin latency with certain plugins, does it even have automatic delay compensation on send tracks/submix tracks? even with really low latency settings on ASIO drivers, my rendered out tracks will always have a delay. I also have Reaper and I don't face this problem over there, and my brother uses Studio One 4, no problems on that DAW too. I really love Mixcraft, this is the most user friendly DAW in my opinion but if I don't find a solution to this problem, I might have to force myself to make a switch.

[@ericmilton2324]

Streetwise Rhapsody I post this same comment to the acoustica forums mixcraft section

[@JosephClarke21]

Please contact support. It must be a specific plugin..because we do not see this problem in our testing or from our users.

[@streetwiserhapsody]

@@JosephClarke21 I have tried this on the Slate Digital Virtual Tape Machine, Ozone's Vintage Tape, A lot of Softtube's plugins like the FET compressor, there are a couple more plugins I face this problem with, basically I can't do any parallel compression on my drum tracks. I tried searching the forums and some users have reported this problem. I'll contact support.

[@osamabinbaby1746]

have you tried using the exclusive load in Wave rt and freezing your other tracks during recording?

[@MohsenBaloch]

wow, this is great.

[@acoustica222]

We think so too!

[@richardpress9551]

Nice

[@tigressblue]

Oh my goodness this is so exciting lol

[@acoustica222]

We're pretty excited too!

[@lipfunction]

i used mixcraft 6 for a long long time, and never upgraded because for some reason, mixcraft 6 had the best envelope automation. at 0:59 you show automation points under the track . In mixcraft 6 i could do this sort of automation very meticulously within the sound file, with lots of different drop points. When i tried later versions of mixcraft, doing lots of micro automations felt very bad and glitchy. i am wondering how mixcraft 9 feels.

[@xed530]

I really like this daw since mixcraft 7, but the upgrade should include it to run in mac

[@JasongsBrainJam]

Does the pitch automation only work on audio? I tried it on a midi clip and no line appears when I hover over it.

[@acoustica222]

That is correct - its audio only. You can mix the midi down to an audio clip to get the same result, though. Right click on the MIDI Track and choose "Mix to New Audio Track". The original track will be muted if you need to change something and redo a pitch change.

[@copykon]

Any thought on mix craft vs Reaper?

[@Metalbass10000]

Ok, convert audio to MIDI is easy. How do i convert MIDI, individual tracks, to audio? How do I print my tracks to audio to include my plugin sounds?

[@CircleofShit]

Do I need a soundcard to use Mixcraft and will it work on Windows 11? Thanks.

[@Kxngfroz_e]

Can it do the 808 slide trick ?

[@m.e3753]

You know mixcraft is amazing that one of the biggest djent bands Reflections Patrick Somoulay uses it to write his insane guitar riffs👌

[@acoustica222]

Awesome!

[@moonlightmotion1139]

Great DAW for Recording specially in Windows Platform

[@acoustica222]

Thanks Moonlight Motion! We appreciate your support!

[@LITMFMUZIC]

so on the website it says it comes with izoptope mastering essentials. does it? i am confused about that.

[@acoustica222]

Hey there! Mixcraft 9 Pro Studio includes iZotope Mastering Essentials - however it's not included with the Recording Studio edition. To learn more about what's included with each version, you can visit: acoustica.com/mixcraft/compare-chart

[@0000song0000]

1:10 is it only on the pro, or the home studio version too? #ImInLove

[@acoustica222]

Hey there - pitch is available in all versions!

[@vadrif-draco]

I'm a little bit late but holy shit these are awesome additions

[@dandelladf]

bravo

[@kelvisafrohiphop9099]

i'm kelvis have been using mixcraft for 2 years

[@seeker1026]

Got the free copy but wil buy the full download when I get home tonight. Had Reaper (not the free copy) but it wouldnt save my projects so I deleted it. I like this one.

[@acoustica222]

Glad you're enjoying Mixcraft!

[@sleepykittyMMD]

does 9 support MPE, or Equator vst plugin for Seaboard?

[@acoustica222]

Hey! Mixcraft itself doesn't offer MPE functions currently, but plugins that utilize MPE should still work inside of Mixcraft! If you're having any trouble with it, feel free to contact our support team and we'd be happy to check into it further for you!

[@spaceorbison]

Mixcraft never fixed the issue with opening Roland 808 plugin where it cuts the view of the vst window in half

[@acoustica222]

If this is happening in Mixcraft 9.0 build 442, please contact tech. support: acoustica.kayako.com/conversation/new

[@simonpetersog]

Is there any option like playing music using Keyboard on the laptop in mixcraft 9, I've seen a option like that in mainstage 3 made by Apple Inc.

[@acoustica222]

Hey there! Mixcraft offers a 'musical typing mode' where you can use the keyboard to enter MIDI notes and play virtual instruments! We have a guide on this here: kzbin.info/www/bejne/gYLRq3memdKdftU

[@simonpetersog]

@@acoustica222 yeah thank you

[@Josepaulinoluna]

MI DAW FAVORITO SALUDOS DESDE EL SALVADOR

[@products-explorer]

you can find all new feature in my videos :-)

[@harmonychamber3182]

What i like the most about mixcraft is you can do all things with a single cursor.... In other daws you have to select different tools for various actions.. The worst thing about mixcraft is adding and searching third party plugins It lacks the main catogery for each plugin you install from various devolepers like other daws have this option...

[@acoustica222]

If you need to organize your plugins, you can always create collections! That can be done under file > manage plugins, in the 'collections' area! So, you can use that to group together your plugins however you'd like!

[@jameshutchins7042]

I have a question. I love chopping up audio in mixcraft loops etc. I know I can save each individual chop in the mixcraft library. What Im asking is can i save my chopped audio outside mixcraft on my desktop in a seperate folder. Example chop up a pad sample into 4 parts can i save each part in the folder without having to save it as a mixcraft project. Thank you.

[@acoustica222]

Hey there! To do that, you could chop up your loop, then set each chop to a separate track and export your project as stems, that way you can quickly bounce out all your one shots to create your own sample packs!

[@jameshutchins7042]

My god thank you. It works great. I have one last question. When the stems mix down my loop chops. When i play the stems the volume is very low I have to normalize them to bring the volume back up to how it was before i mixed down into stems. What am I doing wrong. Thank you for the help abd quick response.

[@jameshutchins7042]

I figured it out. I had the master fader turned down lower then the tracks I had the chopped audio. Once I put the master fader to 0db they came out exactly same level. Thank u thank u thank u. Months ive been stumped. Ppl dont realize how easy it is to chop loops up in mixcraft. Thank you 10x over.

[@russellaustin8453]

How about a detailed vid about how to use Kontakt (multi timbral in one instance) with MC 9 ? I've worked out how to use it to get one instrument in KT but when I want a second instrument I click the tiny keyboard (in MC) and I have to use a second instance of Kontakt ! Help ?

[@acoustica222]

Hey there! You can access the individual outputs for multi output instruments with the '+' icon that appears below the track name next to the track icon. If you're having trouble though, feel free to reach out to our support at support.acoustica.com!

[@0000song0000]

5:37 only the pro version can convert audio to midi?

[@acoustica222]

That's correct - this feature is only available in Pro Studio

[@JordanSteinagel]

Please help! when I select pitch, the automation line completely disappears. Is there a step I'm missing??

[@JordanSteinagel]

Hold on. I just realized it only works with audio tracks and not MIDI

[@AmyntorGaming]

I'm new to Mixcraft, I'm curious what is the difference between mixcraft 8 pro and 9 pro.

[@acoustica222]

There's quite a few new features! You can also see a full detailed comparison at acoustica.com/mixcraft/new-in-9

[@gmbrereton]

Hello - is Mixcraft 9 suitible to windows 11 64 bit please?

[@vynnelson1899]

Where can I purchase the download software?

[@acoustica222]

Hey there! You can purchase a license for Mixcraft at: acoustica.com/mixcraft#buy

[@mydarlinggirlrachae]

Have used Mixcraft since version 2 and also Reaper the last couple of years, both great DAW's, however if your focus is on writing music and getting it out there (to be ridculed and rubbished) , rather than focussing on the tech side of things that gives me a migraine and anxiety attacks, (even more than my ex, who is "a brutta putana da non finire") Mixcraft lives up to the claim to be the muscians DAW..........and the DAW of the Revolution!

[@CoreyB478]

Why did you guys take out the echos

[@LilYo662]

Mix craft is under rated

[@acoustica222]

Some might say we're just a well kept secret!

[@deanc2000]

Sidechaining possible now?

[@acoustica222]

Sidechaining is possible with any plugins that support audio sidechain!

[@K-MAESTRO-PRODUCTION]

My Mixcraft 8 Recording Studio (64-bit) is ok im satisfied :) For mixing mastering recording vocals and all when have Godd VST Neutron Ozone Blue cat audio and.....

[@acoustica222]

Glad to hear you're enjoying Mixcraft!

[@KTSpeedruns]

Can anyone say if this is worth it if I'm considering upgrading to this from Mixcraft 7?

[@FirstBornArt]

Can i publish videos to youtube with mixcraft 9 recording studio ?

[@acoustica222]

You can! Once you export a video from Mixcraft, you can upload it to KZbin or other social media sites!

[@FirstBornArt]

@@acoustica222 ahh okay i remember in mizcraft 7 i would be able to upload them directly to KZbin without exporting

[@IMJ448]

Sorry for my English! Does Mixcraft 9 support Korean now? I'm using 8 pro studio and it perfectly supports Korean. But when I tried Mixcraft9 trial version a few months ago, It didn't support Korean well. Every words was seen like %%%#&&&. I think maybe there were some problems with language patch file. I wonder if the problems have been fixed now.

[@acoustica222]

Hey there! Feel free to get in touch with our support at support.acoustica.com and we'd be glad to check into that for you further and make sure it's working!

[@mcmike89]

Can't tell which is better, Mixcraft 9, FL Studio 20 or Reason 11. They all are great DAWs and I have them all installed on my computer.

[@JosephClarke21]

Pick the one with a single digit version....(=

[@mcmike89]

And that is Mixcraft 9. I also have Magix Music Maker 2020 and Roland Zenbeats as well. The Roland Cloud service for new and always evolving selection of synthesizers and other instruments gets me excited!

[@cathywilson1273]

@@mcmike89 - Hi - I have Mixcraft 9, FL Studio 20, Reason 9, Pro Tools 2019, Reaper 6, Studio One 1, Cubase 10, Ableton ?, Magix Music Maker 2015. I'm going to try Mixcraft for a while, but I am wondering is there a way to edit more than one track at a time via editor windows?

[@mcmike89]

@@cathywilson1273 Oh wow, you must be a great music producer to have all of those music production software. I only have a handful of them. That's great, have fun experimenting what you can come up with. I'm not sure, maybe. I still need to see what Mixcraft has to offer myself. I just bought a copy for myself recently.

[@MNRMNmixes]

Mixcraft for recording, fl studio for electronic music production

[@jobpottas]

MIXCRAFT IS REALLY GREAT, BUT THEY SHOULD CHANGE THE COLOR FROM GREY TO BLACK.THE FONTS ARE DIFFICULT TO READ. MAKE THEM DARKER

[@acoustica222]

Hey there! We can certainly note that down! If you can let us know in a bit more detail what fonts you're having a hard time reading we'd be glad to check into that! Just send the details to our support team at [e-mail] and we'd be glad to add this to our suggestions!

[@luwatson6643]

Ok, when are we going to get SYSEX functionality here?

[@acoustica222]

If you have a feature request, feel free to send it along to our support team at support.acoustica.com and we'd be glad to note it down!

[@bernsteiner88]

is there an Arp in Mixcraft 9?

[@acoustica222]

Hey there! There are some arpeggiated preset sounds in Mixcraft's library, as well as synths that offer an arpeggiated mode! However, there isn't currently an arp effect that can be inserted on any track. We can certainly add that to the suggestions list though!

[@beursekstudios8150]

I liked Mixcraft 8s splash startup window where girl and studio,bring it back : (

[@thecrasian6426]

Can I arm 2 tracks at once?

[@acoustica222]

That's correct! You can arm as many tracks as you'd like at once. So, you could track a full drum kit in one go!

[@vstfreedownload3106]

does mixcraft 9 recording studio support the 3rd party vst plugin? because I plan to buy the studio version of mixcraft 9 anyone know about my question? 🙏🙏🙏

[@acoustica222]

Mas Jun, thanks for the question. Mixcraft 9 supports 3rd party VST plugins.

[@musiclovers8285]

Hi there does it have Dolby Atmos mastering

[@acoustica222]

Hey there! At the moment there aren't Dolby Atmos features available but we can certainly add it to the requests list!

[@musiclovers8285]

@@acoustica222 thanks for making.. please make it soon. Let me know which plugin will work for making Hormony vocals

[@GenosGlory]

I am having problems exporting songs as no sound comes out and after that the mix i did has no sound either. Very annoying as I worked a while making the song. Never had a problem with Mixcraft 8.

[@acoustica222]

Hey there! If you're having issues getting your track exported properly, feel free to contact our support at support.acoustica.com!

[@GenosGlory]

Mixcraft - Music Recording Software Thank You

[@mousermind]

I paid $30 for this and more via Humble Bundle. ^_^

[@garyleeheard3434]

Hey guys, I use pro Studio 8. Lately I been recording other people and enjoying alot . But I need help with one issue. Every beat I make and save I can't seem to find once I go and open up project nothing there or even those beats I export and burn off to CD and they bring em back or even bring in a flash drive with a beat on it I can not seem to import any beats into the Daw so I can record someone or even my self and beats for me..jus disappear. Does anyone know how to help with that is there something I can or am doing wrong. It's my only issue.. it is by far my favorite music software and will always be.. thanks for ya time .

[@acoustica222]

Hey there! Feel free to reach out to our support team at [e-mail] and we'd be happy to help!

[@gustavolrcoelho]

I'm not into audio production, BUT, would pay 1 buck for the lowest tier be a good thing for a micro game developer?

[@jvrerae8512]

Purchased mixcraft 9 but it won't let me.use the option to convert audio to midi hahah

[@acoustica222]

Hey! Feel free to reach out to our support team at [e-mail] if you're having trouble and we'd be happy to help!

[@bareekhung8100]

ต้องการซื้อครับ ต้องไปซื้อที่ไหนครับ

[@SunshineMix101]

'Anbody know why there is an ever-so-slight but annoyingly noticeable delay (aprox 0.25 sec) on my M-Audio Keystation 49? I use version 9.0 Pro Studio 64-Bit Build 468

[@acoustica222]

Hey there! If you haven't already, feel free to contact our support at support.acoustica.com and we'd be glad to check into that!

[@SunshineMix101]

@@acoustica222 Thanks! I will do that. :)

[@hideolivia4212]

download link?

[@acoustica222]

Hey there! You can find Mixcraft at: acoustica.com/mixcraft/download