Aftermarket engine mounts vs OEM engine mounts: Detailed side by side comparison

I compare aftermarket engine mounts vs OEM engine mounts in this video. I do a detailed side by side comparison of an OEM engine mount vs an aftermarket engine mount for the front motor mount (engine mount) on the 7th generation Honda Accord 2003 - 2007 4cyl or the K24A engine. This same mount is used in certain years of Honda cars with the K24A engine such as the Element and Odyssey. I cover what makes OEM mounts stand apart and why it is possible to suffer engine vibration from motor mounts especially when some aftermarket motor mounts are used. Aftermarket mounts do not give the same level of cushioning or dampening of engine vibrations.
Never get duped again if you are in places where you buy this in person.

[@jeeshahjee]

Wonderful detailed comparison!! Really helped me, Thanks a bunch

[@DIYAutoworksNG]

You're welcome. 🙏🏼

[@harrytruong14]

Great videos ! Just found out my front is an aftermarket, which may be why I am getting vibrations mainly when in drive and stopped with the AC on. I've also watched a lot of your other videos, thanks for uploading them ! :)

[@DIYAutoworksNG]

Thanks a lot for the compliments and for watching!!! Your observation on the aftermarket mount/vibration is valid. Could also be IACV-related especially if you observe the RPM bouncing a bit or low under those conditions. All the best. Do let me know if you need my help in anyway!

[@harrytruong14]

@@DIYAutoworksNG seems like my RPM is stable, rises a bit with AC but it is not bouncing around. I've got my hand on a good condition used OEM mount which I will install following your video. Thanks for everything ! 😃

[@DIYAutoworksNG]

Sounds great!

[@local80g]

You can’t tell how well a motor mount just by looking at it. You have to try it. Our shop has tried many different brands of aftermarket mounts and some are good for a short time, some are not good from the start. We found a decent brand from one of our suppliers but in truth, when it comes to motor mount, you should only buy dealer motor mounts.

[@DIYAutoworksNG]

I agree that OEM is just the way to go.

[@useyourcell]

Great vid! I have a question: would you recommend AM or OEM engine mounts for a 2008 CR-V? It is shaking too much and the mechanic said the front mounts are broken and need replacement. But I've read that they still vibrate a lot after replacing them with AM, sometimes even more. I'll appreciate your thoughts and expertise 🤙

[@DIYAutoworksNG]

Personally, I do only OEM mounts from experience. There may be good AM ones, but I am yet to come across one.

[@useyourcell]

@@DIYAutoworksNG thanks for your input bro. I'll get OEM mounts

[@tubs1163]

Any advice on where to get some OEM ones for a 2007 Honda accord ?! Or any parts for said car please 😭

[@DIYAutoworksNG]

Amazon, Ebay and OEM dealer sites like hondapartscheap.com

[@mustyali9529]

Quite informative. Keep it up!

[@DIYAutoworksNG]

Thanks!

[@emmanueloluwadaisi3564]

I'm impressed! the video is educative. From your explaination the OEM is hydraulic (which is the best option) while aftermarket is solid rubber. if i may get you right. kindly elaborate cos i'm facing issue with my honda civic 2006 passenger side engine mount which i replaced but the vibration hasn't stopped.

[@DIYAutoworksNG]

Did you check the other mounts in the car? You should inspect all mounts if you have a broken mount. Also, did you fit an OEM or AM mount? Some AM mounts are hydraulic too, but I just haven't seen ones as good as OEM.

[@emmanueloluwadaisi3564]

@@DIYAutoworksNG how can i get in touch with you please? mobile number.... i have an issue that i need your expert advice about.

[@abandz7755]

any advice where i can get OEM motor mounts for Honda Pilot 06 4WD

[@DIYAutoworksNG]

Depends on where you have access to and the condition you want the parts in (new vs used). 1. New - Dealership/dealer websites e.g. hondapartsnow.com. Some Honda dealers are on Amazon as well. Look out for 'genuine OEM' in the description. 2. Used - Ebay, junkyard, local used parts store.

[@dragonext2001]

SO ... where do we buy real oem engine mounts that arent used? My 2008 Buick lacrosse super leaks power steering fluid and my mechanic said the motor is leaning causing the return line to lay on the exhaust pipe. New motor mounts at advance caust $150 each and I need 2. Since motor mounts only last 5 to 7 years I dont want to get used ones from the junkyard just to find they already bad or will be in a short time. I dont have alot to spend.

[@DIYAutoworksNG]

Dealer or OEM supplier websites like www.gmpartscheap.com/

[@liormiz5]

Ford explorer. How about "anchor" brand vs OEM ford. Big difference?

[@DIYAutoworksNG]

I haven't used Anchor brand before, so can't really comment objectively.

[@GreatGrandmasterWang]

are you from wakanda? kidding aside, is using aftermarket shock mount advisable? I can't find any OEM.

[@DIYAutoworksNG]

Lol. For shocks, I have done KYB aftermarket without noticeable difference in ride quality. If doing aftermarket, I would say stick with those brands that also produce OEM variants.

[@tianam6105]

I know this is old but I have a question. I got my mounts changed with aftermarket mounts and my car is still jerking in reverse and drive. They’ve checked for anything else that could be wrong and nothing is. They’re saying I need OEM mounts. Is it possibly for after market mounts to not work?

[@DIYAutoworksNG]

Did they also check side mounts and transmission mounts? Suspension bushings as well. If all these were ruled out, I do not think that brand new aftermarket mounts will cause jerks, its more of vibrations. But who knows may some really low quality ones. What brand did you fit? The other thing to look out for is whether the jerks are coming from the transmission itself.

[@tianam6105]

@@DIYAutoworksNG we’ve checked the transmission and nothing. No codes or anything. I’m so frustrated. I’m not sure what AM mounts were used but I’m trying OEM Monday. I’ve had 3 people check transmission fluid and everyone says it’s fine. He said the transmission mounts are slightly worn but not bad enough to change. That it wouldn’t cause my car to jerk. Is that true ?

[@DIYAutoworksNG]

Regarding the question on the AT mount being slightly worn, it depends. Slight wear shouldn't have an effect such as jerking when going into gear. Does the jerk happen every single time? With every gear shift? Some transmission faults do not show up on even high end scanners. Not saying this is the case. Let me know the answers to the questions above. Also just to be clear, can you confirm the car model, trim and year?

[@tianam6105]

@@DIYAutoworksNG yes. Every time. I ordered OEM mounts today and will be changing them this week and will let you know. Again, we’ve tried everything. I feel hopeless at this point. I’m sure it’s nothing too major considering I been driving it like this for over a year now. But I want it fixed.

[@DIYAutoworksNG]

Okay. Do let me know how it goes...

[@Kevin-jb2pv]

So what would you recommend in the case where the OEM parts are discontinued and out of stock everywhere? Is there an aftermarket part that's, like, the _least_ bad? 87 Honda Civic base 1.5l

[@DIYAutoworksNG]

Very good question! You'll just have to go for an AM mount. I don't necessarily have a brand to recommend, but Anchor seem to have some good reviews online. I believe you should find mounts on Rockauto or other similar sites.

[@Qkfltpdls777]

@@DIYAutoworksNG Anchor vs Westar. Which one is better?

[@DIYAutoworksNG]

I really haven't had first-hand experience with these 2 brands, although I know Anchor mounts.

[@Qkfltpdls777]

@@DIYAutoworksNG Which OEM brand do you recommend within Rockauto for mounts?…

[@DIYAutoworksNG]

To be honest, I don't know. And this isn't to say they may not be aftermarket mounts that are good. I just haven't used a brand I can recommend. Maybe you try and see if such mounts or similar are available on Amazon and read reviews? Through my travails with aftermarket mounts, I've just stuck with OEM, or used OEM if budget is tight.

[@daviderhahon]

Does, the rear engine mount contain oil too?

[@DIYAutoworksNG]

The rear, as well as the passenger side mount contain oil

[@DIYAutoworksNG]

They come with the oil. You do not need to add anything. Thanks for watching!

[@daviderhahon]

@@DIYAutoworksNG For V6, both front and rear mounts are liquid-filled. But for the 4-cyl, I think it's only the front mount that comes with liquid. All the toks I've seen ain't liquid-filled. I may need more research.

[@DIYAutoworksNG]

Hmmm. The worn OEM rear ones I've seen also contain fluid including the passenger side mount.

[@daviderhahon]

@@DIYAutoworksNG You are correct. I did some research as I said. I inspected some rear OEM ones and yes they are liquid-filled.

[@Ricardo-qv9jn]

Where do think is best to buy motor mounts

[@DIYAutoworksNG]

It really depends on your location. If you are able to order the OEM from online sources e.g. Dealer sites, Amazon etc., great. Otherwise, you can look to your local parts market for used OEM. Are you in Nigeria?

[@Ricardo-qv9jn]

@@DIYAutoworksNG in the U.S, l bought my motor mounts in amazon for 130 and they only lasted like one year.

[@DIYAutoworksNG]

If its a Honda check, hondapartscheap.com. They stock OEM

[@schifoso]

@@DIYAutoworksNG I checked their website and they only ship within the USA. Everywhere else the OEM parts are really expensive.

[@Pinkielover]

oem

[@davidtorres1696]

Video makes common sense better off using OEM parts doesn't matter if you pay $350 for one motor mount although after market good for somethings but timing chain or mounts stick with the original brand💯

[@DIYAutoworksNG]

Can't say it better!

[@kushjay1]

Should of got it with hydraulic oil after market

[@DIYAutoworksNG]

Even when you do, I am yet to see an aftermarket that gives OEM ride quality...

[@kushjay1]

@@DIYAutoworksNG how would u no u got just rubber non hydraulic bro come on don’t bullshit me

[@SCbredGullahaccent]

why used an engine mount

[@DIYAutoworksNG]

I don't understand

[@SCbredGullahaccent]

@@DIYAutoworksNG what are aftermarket engine mounts used for does it approve the handling

[@DIYAutoworksNG]

@SCbredGullahaccent They aren't good in my experience. Leads to vibrations.

[@Anon1mous]

Looks more like a fake knock-off not just an aftermarket.

[@DIYAutoworksNG]

😅 Possibly! Though loads of genuine aftermarkets still have the vibration issue.