TOUCH UP paint Factory-Repair deep scretch

[@MrStimar]

You are using the factory base coat, but is there a problem with the clear from this kit ? Why not using it?

[@מדינט]

When I sand alpine white 300, I get brighter white on the touchup and more yellow tint on area around it.

[@Soviso97]

Hi, sorry, can I use the clear coat that I find in the BMW kit and mix it in the final coat as in the video instead of the UV Coating? Do only the drying times change?

[@williamj4538]

Can you do a video on how to fix someone else’s bad touch up paint job on a scratch?

[@gbmwp]

If we will instead of the UV and use the Factiry Coating is a problem? I didn't find a UV Coating.

[@victorma1227]

Could you tell me how to use Clearcoat and which step to use it ?

[@nelsoninacio1823]

Merci pour toutes vos vidéos.

[@l0r3nz0rm]

exceptional paint retouching as usual you are very good. one thing that I hate aesthetically is the sign of the heat that the lights in this case the LED lasers leave on the plastic. practically despite the car is brand new the headlight even if shiny it looks old ..

[@Amddetailing]

Yes, it is located on the inside and there is no help without disassembling the headlight

[@l0r3nz0rm]

@@Amddetailing i know it but aesthetically isn't good at all . This is car company fault

[@jonthomson1714]

I have an older 2016 X1 mineral white that had a few scratches so I bought the touch up paint and it wasn't even close in color. Is there a way to alter the paint to match? The car is in great shape but the scratch repair looks terrible because of the color difference The touch up paint from BMW is so much whiter than the aged paint on the vehicle. So much headaches for such a simple job

[@Kreasearch]

Would you be able to mention what music you used? Great job as always, thanks.

[@High-Performance-IQ]

Darude -Sandstorm

[@RemcoBerg-n7q]

Is it also possible to mix clear coat with a metallic paint?

[@Amddetailing]

yes

[@kelvin1250]

Great Job! This is possible with paint BMW A96?

[@Amddetailing]

try

[@DhanushSathish]

Awesome work 👍🏽

[@cristiankovacs9536]

Profiiii like all the time 💯! Best Regards!!!

[@Amddetailing]

Tnx my best friend enjoy😉😉😉

[@cristiankovacs9536]

@@Amddetailing 🤝🤗

[@I_S_S_A_]

Is this regular touch-up paint? Or “BMW’s Touch Up Paint 𝐒𝐓𝐈𝐂𝐊”. I have no idea what this Paint 𝐒𝐓𝐈𝐂𝐊” is & can’t find any type of visual on it online to let me know what I’m going to be working with & what I should be expecting. For example, there is a certain type of touch-up paint applicator I want to use but from the sounds of this “Touchup Paint 𝐒𝐓𝐈𝐂𝐊” by BMW it doesn’t seem like I’m going to be able to use that applicator because it works with a liquid type of paint, it’s only going to work with a fluid paint & this “Touchup Paint 𝐒𝐓𝐈𝐂𝐊” BMWs has does not at all sound like it has anything to do with a fluid, in fact, it sounds like glue 𝐒𝐓𝐈𝐂𝐊 or something similar to that, as if I’m going to have to roll this paint on or something I don’t even know what to think at this point. If anyone has any information on this subject please reach out and help me with this issue I’m having I’d appreciate it very much thank you so much in advance.

[@Amddetailing]

Its org.BMW touch up

[@mcchow9399]

Hi, at timestamp 8:41 you use polish. Want substance u applied for polish? Any brand to recommend?

[@Amddetailing]

Yes

[@maximkabanov4329]

Good job man 🙏💪

[@Amddetailing]

Tnx friend

[@chrischiang1512]

Amazing work

[@Mr.johansson]

Awesome work my brother 🤩💪your the master 💥💯

[@Amddetailing]

Tnx my faithful companion and friend😘😘😘😘

[@nadermoallemi3152]

great job

[@Amddetailing]

Tnx

[@chichyiphone4]

How much time it took you for the touch up? How about touching up rock ships like in the hood or rocker panel ? Thank you

[@Amddetailing]

you have a video on my channel for stones on the hood, and this one takes 45 minutes

[@nnuoo8594]

where are you guys located? and how much does this kind of repair cost? thank you

[@Amddetailing]

I live in bosnia

[@theMoss-n3s]

Pozz, imam jedan problem, stavim baznu boju, 2-3 sloja, nakon toga hocu izbrusit i poravnat, medutim sva baza prakticki otpadne, zasto ? Ispolirao prvo i sve kao ti, ali ne funkcionira... Kako da to odradim onda ? Radi se o boji LZ7G.. Lp

[@Amddetailing]

Pomjesaj sve zajedno bazu lak i herter i napuni iz prvog puta

[@theMoss-n3s]

@@Amddetailing pod lak mislis onaj "clear coat" ili samo bazu i harter zajedno ? Lp

[@Amddetailing]

@@theMoss-n3s bezbojni lak

[@theMoss-n3s]

@@Amddetailing oke, trebam se drzat nekog omjera ili od oka ? Lp

[@prika58]

Sjajno odradjeno...nema razredjivanja niti baze niti uv bezbojnog?

[@Amddetailing]

Nema

[@prika58]

Kako ispada na srebrnim...? Odnosno,ima li boja na kojima se treba prilagodjavati?

[@Amddetailing]

@@prika58 tesko se srebrena moze uraditi

[@damirturkovic9830]

Đe si uz'o ovu grebalicu za lak (scraper)? Da te hvalim i govorim svaka čast za urađen posao nema smisla više...apsolvirano već da si "tito poliranja"😉

[@Amddetailing]

U prodavnici boja i lakova trebala bi imati svaka radnja to

[@damirturkovic9830]

@@Amddetailing fOla za odgovor i hajd mi reci kako ću ti radnju naći (adresa, telefon- nešta)

[@Amddetailing]

@@damirturkovic9830 imas na fb Amd detailing tamo su svi podaci

[@ivanbenkovic4789]

Super si odradio to, izgleda odlično 👍. Spomenuo si da je teško srediti oštećenu srebrnu boju. Na bmw-u od sina smo probali sitna oštećenja od kamenčića riješiti ali ne ide.(Titan silber). Probao sam samo bazu i herter, pa bazu sa lakom, pa lak naknadno, ali ne možeš pogoditi da se ne vidi i iz daljeg gdje je bila rupica. Ispunimo dobro,izbrusim sa 2000,3000 i 4000 abralonom pa poliranje i poravnato je na nulu ali se opet vidi. Imaš li kakav pametni savjet za srebrnu kod oštećenja od kamenčića. Što se tiče farova super su ispali samo sjaj ne traje dugo poslije poliranja. Set za polimer bi ti dosta olakšao posao. Imam taj set i super sam zadovoljan sa učinkom i trajnošču, a izgled kao novo. Lp.Ivan

[@Amddetailing]

Srebrena je puna sitnih kkristala i kako god da je naneses ona tamni ja sam uspio samo 1 silver auto uraditi na 90% i taj video ima na mom kanalu (sigurno mi se posrecilo)😄

[@ivanbenkovic4789]

@@Amddetailing Da vidio sam taj video, ali stvarno ne kužim zašto potamne točkice, ne bi pogodio nijansu nikad 😵.lp

[@Amddetailing]

@@ivanbenkovic4789 zato sto se grupisu na jednom mjestu

[@Minkyu85]

8:31 I still see some small chips and the surface is levelled enough. Did you have to use the UV coating again before polishing?

[@Amddetailing]

Yes I use

[@Ernes10]

1k or 2k uv coating?

[@Amddetailing]

Fabric coating

[@willysir8836]

You are a witcher ! Why don't you use factory clear coat ?

[@Amddetailing]

it dries slowly, that's why I didn't use the factory coating

[@Sunny-3]

@@Amddetailing If we do use the factory clear coat, is it the same mixture ratio 2:1 ? (2 paint x 1 clearcoat lacquer)

[@bjimsondetailing]

nice job

[@Amddetailing]

Tnx friend

[@Elfprint-Ploiesti]

Perfect!

[@emobile8]

Madjioničar

[@Amddetailing]

Hvala prijatelju

[@helmutweber1465]

Horrible music