Alfa Romeo Giulietta Front Brake Pads Changing

In this Alfa Romeo Giulietta video we look how to replace/how do I change the front brake pads.
#Giulietta
#Vialettotony
Like & Subscribe for other how to & repair videos & things you wish you knew earlier, that are up already, or getting posted soon. Battery replacement, Trunk / Boot Wiring Looms, Air / Cabin Pollen Filter, MAF Mass Air Flow Sensor Fix Cleaning, PCV valve, Fuel / Gas Filter, Steering Fault Codes Fixed, Passenger Airbag Light, Electric Windows, Anti Roll / Sway bar Bushes, Drop Links, Brake Discs, Pads, Brake Fluid Flush, Springs, MOT Preparation, and more. 2.0 JTDM 170
In questo video vediamo come sostituire/come si cambiano le pastiglie dei freni anteriori.
Metti mi piace e iscriviti per altri video su come riparare e cose che avresti voluto sapere prima, che sono già attivi o che verranno pubblicati presto. Sostituzione della batteria, cablaggio del bagagliaio / baule, filtro antipolline aria / cabina, pulizia del sensore di flusso d'aria di massa MAF, valvola PCV, filtro del carburante / gas, codici di errore dello sterzo corretti, luce dell'airbag del passeggero, alzacristalli elettrici, boccole della barra antirollio / antirollio, Drop Links, dischi freno, pastiglie, lavaggio del liquido dei freni, molle
Dans cette vidéo, nous examinons comment remplacer/comment changer les plaquettes de frein avant.
Aimez et abonnez-vous pour d'autres vidéos et réparations que vous auriez aimé savoir plus tôt, qui sont déjà en ligne ou qui seront bientôt publiées. Remplacement de la batterie, faisceaux de câblage de coffre/coffre, filtre à pollen air/cabine, nettoyage du capteur de débit d'air massique MAF, valve PCV, filtre à carburant/gaz, codes d'erreur de direction corrigés, éclairage d'airbag passager, vitres électriques, bagues de barre stabilisatrice/anti-roulis, Liens de chute, disques de frein, plaquettes, rinçage du liquide de frein, ressorts,
W tym filmie przyjrzymy się, jak wymienić/jak wymienić przednie klocki hamulcowe.
Polub i zasubskrybuj, aby dowiedzieć się, jak naprawiać i naprawiać filmy i rzeczy, które chciałbyś wiedzieć wcześniej, które są już gotowe lub zostaną wkrótce opublikowane. Wymiana baterii, wiązki przewodów bagażnika/buta, filtr przeciwpyłkowy powietrza/kabiny, czyszczenie czujnika masowego przepływu powietrza MAF, czyszczenie zaworu PCV, filtr paliwa/gazu, naprawienie kodów błędów układu kierowniczego, oświetlenie poduszki powietrznej pasażera, elektryczne szyby, tuleje stabilizatorów/stabilizatorów, Linki, tarcze hamulcowe, klocki, płyn hamulcowy, sprężyny
In deze video bekijken we hoe ik de voorremblokken moet vervangen/verwisselen.
Like & Abonneer voor andere video's en dingen die je eerder had willen weten, die al online staan ​​of die binnenkort worden gepost. Batterijvervanging, Kofferbak/Bootkabelboom, Lucht/Cabine Pollen Filter, MAF Luchtmassameter Vaste Reiniging, PCV-klep, Brandstof/Gasfilter, Stuurfoutcodes Vast, Passagiers-airbagverlichting, Elektrische Ramen, Stabilisator-/Sway bar Struiken, Drop Links, remschijven, blokken, remvloeistofspoeling, veren
Se aftó to vínteo exetázoume pós na antikatastíso/pós allázo ta brostiná takákia frénon.
Mou arései & Engrafeíte pós na & episkevázete vínteo kai prágmata pou thélete na gnorízate norítera. Antikatástasi batarías, argaleioí kalodíosis/portmpankáz, Fíltro gýris aéra/kampínas, Katharismós aisthitíra MAF mazikís roís aéra, Fíltro kafsímou/aeríou, Diorthóthikan oi kodikoí vlávis diéfthynsis, Thámnoi prostasías apó rolá/talántefsi, elatíria
In diesem Video sehen wir, wie man die vorderen Bremsbeläge ersetzt / wie ich sie wechsel.
Liken und abonnieren Sie, wie Sie Videos und Dinge reparieren, die Sie gerne früher wissen würden. Batteriewechsel, Kofferraum-/Kofferraumkabelbäume, Luft-/Kabine-Pollenfilter, MAF-Luftmassenmesser-Reinigung behoben, Kraftstoff-/Gasfilter, Lenkungsfehlercodes behoben, Stabilisator-/Stabilisatorbuchsen, Federn
En este video vemos cómo reemplazar / cómo cambio las pastillas de freno delanteras.
Me gusta y suscríbete cómo y repara videos y cosas que desearías saber antes. Reemplazo de batería, cables de cableado del maletero / maletero, filtro de polen de aire / cabina, limpieza fija del sensor de flujo de aire masivo MAF, filtro de combustible / gas, códigos de falla de dirección fijos, bujes de barra estabilizadora / estabilizadora, resortes
Ebben a videóban az első fékbetétek cseréjét/cseréjét nézzük meg.
Iratkozzon fel az elemcserére, a csomagtartó/csomagtartó huzalozó szövőszékekre, a levegő/kabin pollenszűrőjére, a MAF légáramlás -érzékelő javításának tisztítására, az üzemanyag-/gázszűrőre, a kormányzási hibakódokra, a kanyarodásgátló/lengéscsillapító perselyekre, rugókra
Kono bideode wa, furontoburēkipaddo no kōkan hōhō/ kōkan hōhō o mite ikimasu. Batterī kōkan, toranku/ būtsu haisen rūmu, ea/ kyabin kafun firutā, MAF masueafurōsensāfikkusukurīningu, nenryō/ gasufirutā, sutearingufōrutokōdo shūsei, anchirōru/ suu~eibābusshu, supuringu o kōdoku suru

[@pavw5508]

Enjoyed it. I always find those types of work almost therapeutic. Thanks for the video

[@Clarkie8590]

Very timely, did my pads and discs today. You've made it look far easier 😅

[@ibrahimulker1294]

Merhaba Wialetto Tony Ben Türkiye den Baybars Alfa 2011 model Alfa Romeo Giuilette 1.4 MA 170 lik aracım var, çok güzel ve yararlı bir video çekmişsin eline sağlık, sizi izleyerek bende balata ve disk leri değiştirdim. Selamlar Kolay gelsin. Güvende Kalın..

[@hendriclash9343]

you´re videos are very helpful. I changed a lot of things on my Giulietta QV with confidence because of you

[@AJamespaver]

I've been waiting to do this job (and the discs), but wanted your video first to explain clearly how to do it! Thanks for the great video!

[@vialettotony]

Hi James. The disc video will be out next Thursday if it helps?? Thanks for watching and commenting. Really appreciated. All the best. 👍

[@AJamespaver]

@@vialettotony Perfect yeh I'll be watching 👍

[@seanmann7278]

Great video Tony did my front brake disks and pads this morning keep making the great videos

[@SturbokSensei]

Great video once again! Just for funsies next time you are pushing back the piston open the bleed nipple while you are pushing it in so all the blackened fluid that has been in contact with the piston seals etc won't go up into the system. You will be surprised how black the fluid that sits in the calipers gets in just a few years... Thanks again for making servicing content for the G, just used your front seat removal video yesterday!

[@vialettotony]

Hi Sturbok. Great to hear from you. Some useful advice for sure. I wanted to use the laptop to bleed the brakes as you saw, so wanted to ensure there was extra fluid in the reservoir. As I changed my brake fluid a couple of months ago, I wasn’t too worried about dirty fluid, but you’re option would definitely add value 👍 All the best.

[@aurisd.4456]

thanks for all these alfa videos, I got one to myself Tb version

[@petersoutham8621]

Brilliant vid tony. Did you do one showing how to refit the plastic lugs on the rear of the handle.

[@vialettotony]

Hi, not sure I understand correctly. Can you be more specific? All the best 👍

[@M4hunter1234]

Just the video I need! Doing mine next week

[@GTakos89]

Another great video Tony !

[@johnwhalley223]

Thanks for another great video

[@valterreboredo]

Great video as always! 👌

[@Red_Ford]

I finally bought my Giulietta with petrol engine 1.4 120KM 🤩

[@vialettotony]

Hey Red Ford. That’s great. Congratulations and welcome to the family. 👐🏼👍🍻

[@Megane-kun147]

These videos are a God send. Thank you so much for making them, they're super helpful. One question though: Will you make a video on how to flush the radiator system in the future? Also if the engine coolant is on the minimum line would it be advisable to mix in a little bit of distilled water into the reservoir? Keep up the amazing content mate.🙏🏻 Love from South Africa.💙

[@vialettotony]

Hi Megane-kun. Yes, I’m hoping to do this. I need to get my cambelt changed, so considered leaving it as it will be changed then. Hopefully I’ll get around to it soon. Regarding topping up the coolant, for the cold temperatures we get in the UK, I always like to keep the ratios factory, but for SA temps, you’d probably get away with adding distilled water as an option. Thanks for your comments, and watching and subscribing. Really appreciate it. All the best. 👍

[@callum-Watson]

What an excellent video

[@semeng63]

Nice work 👍

[@stahlhart8998]

You are lucky that u dont have the Brembos....whatever u do there its way way too expensive...awesome video as always. Stay safe

[@vialettotony]

Thanks Stahl. Appreciate it as always. Keep healthy. 👍

[@manmodel5361]

Hi do you have qv version?

[@vialettotony]

@@manmodel5361 no it’s a Veloce spec.

[@benimrehberim12]

Very nice

[@kyle1282]

Super useful video - could have done with this last august as I lost my rag with it and had the local garage do it instead! Looking forward to more! As a side note, where do you get all your torque specs from?

[@vialettotony]

Thanks Kyle. Appreciate the feedback. I have a spec sheet with most elements on that I “sourced” a while back. Thanks for watching and subscribing if you have. Really appreciate it. All the best 👍

[@ismailgullu4143]

I couldn't get the reason of rubbing on your disks. Was the reason is not bleeding calipers by compressing piston? If I bleed by compressing caliper will it still rub on disks or rubbing is not that important to care about? Thanks in advance.

[@vialettotony]

Not sure I fully understand the question but if you have a slight rubbing after bleeding that’s not a problem. Hope that helps. All the best 👍

[@ismailgullu4143]

hello, on owners manual i see that front disks are self ventilated. In this case what was the reason u use not ventilated model disks?

[@vialettotony]

The Cloverleaf has drilled slotted vented disks, but the Veloce has only vented if that’s the difference you mean. Different power cars requires different stopping power. All the best 👍

[@ismailgullu4143]

@@vialettotony i’ve seen some providers that suggest ventilateds for even 1.6jtdm. Money bait i guess. thanks a lot.

[@ibrahimulker1294]

Qual è il liquido che metti sul bordo della pastiglia freno? Grazie in anticipo, buon lavoro, ben fatto. Saluti dalla Turchia

[@vialettotony]

Hi. Thanks for watching and happy to help. It’s copper grease on the pad. Helps stop squeaking on the brakes. Only the back though obviously. All the best 👍

[@FISHERN123]

What diag software are you using?

[@vialettotony]

Hi Nigel. It’s multiecuscan. Have a look on the channel. Theres a video about connecting to the cars OBD port which details it. Thanks for watching. Really appreciate it 👍

[@marchutchings8834]

Hi Tony, why not paint the calipers red or orange mate???

[@vialettotony]

Haha. Hi Marc. Yep, that’s another video that I have planned already. 😉. Looking forward to shooting that one. I need to do control arms, bushes and rear brakes first…. But I’ll definitely be painting the callipers at some time 👍

[@manmodel5361]

Hi. Tell me please,how much diesel/100 km? And what you think: should I take diesel 2.0 or 1.75 tbi? Thanks.

[@vialettotony]

Hey Man Model. Sorry for not responding to this comment. All the best.

[@manmodel5361]

@@vialettotony Don’t worry, you answered in another video. Deep doing videos,it’s very informative and helpful!

[@ExplorationsParanormales]

hello ! What cable are you using to connect? and what is the version of multiecuscan? thank you so much.

[@ExplorationsParanormales]

Is there another way to drain the fluid?

[@vialettotony]

Hi. There’s a link to the cable in the description on another video. I’ll see if I can find it for you. I’m also running the most current version. Can’t remember what it is at the moment though and the Mrs has the laptop. All the best 👍

[@vialettotony]

Here’s the link to the video with the link for the cable in the description m.kzbin.info/www/bejne/qIG2inpuqMyJjrM

[@vialettotony]

@@ExplorationsParanormales you can do this manually. You just need someone to help. m.kzbin.info/www/bejne/pHebi4OCnaakiK8

[@vialettotony]

Here’s a link to a video for it 👍

[@mastertabsguitarandmore3850]

How many NM for the 7 bullon ?

[@vialettotony]

Hi. For the caliper fixing which is 7mm it’s 27-30Nm. Hope that helps. All the best 👍

[@mastertabsguitarandmore3850]

@@vialettotony thank you

[@WolfmanDOM]

Hi Tony. Just A quick one. How important is the Bleeding through the ECU? I don’t have any obd reader kit. But would love to give this a go myself.

[@vialettotony]

Hi Dom. Not important at all. It can be done the traditional way. There’s a video on changing the brake fluid where I do the normal bleeding. Hope that helps. All the best 👍

[@ardonjr]

@@vialettotony Thanks, was looking for this answer!

[@marchutchings8834]

sorry I meant yellow??

[@vialettotony]

Haha. No worries. 👍