more progress on the JS Racing Products porsche 944
Пікірлер: 61
@Brock_Landers Жыл бұрын
Dang man, where the hell have I been? You have provided us with so many awesome videos over the years and I have always remembered this build, but I haven't seen an update in so long that I thought that you fell off, but then again I have so many channels that I am subscribed to that I can't keep up with hardly any of them. I miss this build. The 944 and 928 have always been among my favorite Porsches.
@BLACKLACDTS9 жыл бұрын
I love what you do. I want this setup in my fox and I am going to make it happen. I would love to see this with the stock wheels on it and drag radials out hurting unsuspecting people's feelings at hot rod cruise week in ocean city this fall. Lol
@fks-pv8il2 жыл бұрын
Love that ride!
@ericfeagley69309 жыл бұрын
love it when a dazzle car like yours hands a racecar hayloft
@meeka49 жыл бұрын
Hey justin great job on the build man!!
@W5rr2nG9 жыл бұрын
Love the videos man. Keep em up!
@ericolsen67vw2 жыл бұрын
She looks fast
@HEKTIC4588 жыл бұрын
This thing would be so much fun
@losdelgadillooo8 жыл бұрын
do you sell a ls swap kit for the 944?
@moneymac28649 жыл бұрын
Awesome like always thanks
@TunedbyMMT9 жыл бұрын
Awesome man!
@mikeeagle26534 жыл бұрын
turbos make more tan 10-15 hp per lb. more like 20-30 hp
@BIGSMOKE-bl2lq9 жыл бұрын
Getting faster
@MrGGPRI9 жыл бұрын
Why not try a 90deg elbow when on the dyno.....
@watahyahknow9 жыл бұрын
guess the next step will be fitting bigger injectors , unless youre allready at the limit of the turbo as for the exhaust problem on the dyno , maibe you can make a slip on exhaust with a bend in it ending up about where the door is it would only take welding on some small hooks on the existng exhaust and a edge to stop the add on piece from sliding on too far so you can use springs to hold the longer pipe on images.mcn.bauercdn.com/upload/knowhow/jan19%2005%20fit%20exhaust%20system/8-01.jpg the car is hardly moving on the dyno so i guess you can just have the tip of it laying on the floor
@PROJustinSane9 жыл бұрын
Yeah we thought of that. But to be honest it's a mustang dyno and it will always read several hundred hp less then the rest so we just use it to get close and then finish on the street. We could also back the car on since it's a awd dyno and face the exhaust away from the wall.
This is awesome!!! I love that I am not the only one that wanted to do this conversion. Great job! if you want to see my 944, LS1 conversion check it out. @
@kinderutz7 жыл бұрын
17 to 22 is 5 not 4 :)
@s.v.gadder14436 жыл бұрын
You need to run a boost a pump, it would keep you from running lean
@carguyeh8 жыл бұрын
I read that you're using an 8.8 rear axle, did you have to revamp the whole rear suspension to use a straight axle? Love your videos, been watching them for hours. Very informative.
@Nippledozer7 жыл бұрын
AWD V8 If he is using a straight axel, yes, not only destroy the irs but also fit a new transmission in the front of the car, as the porsche uses a transaxel. Its possible that he changed the gears only, or fitted a different (corvette) transaxel
@s.v.gadder14436 жыл бұрын
8.8 is a ford axel, and the way they mount up it wouldn't be hard just have to cut 4 new homes and build 4 torque boxes 2 lower 2 upper probably could be done in a day honestly
@Trapper50cal5 жыл бұрын
Was that guy gaming you on the tree? Seemed like he was trying to get you to stage first...
@ryanbarbolt36917 жыл бұрын
HOLY SHIT, that bitch moves!
@ryanbarbolt36917 жыл бұрын
Fuck you chump, what the hell does that have to do with how hard the car leaves. You just watched it didn't you. Does me commenting on the speed of that car have any fucking thing at all to do with whoever owns it and their personal life. Go fuck yourself you name calling asshat.
@coryhaynes87557 жыл бұрын
Ryan Barbolt ohhhhhhh throws down the asshat. it's on now ya ass pirate
@MississippiWopGenius3963 жыл бұрын
how much hp is your car.
@RiversideRacecraft8 жыл бұрын
I think there is a really good chance that all your problem was had to be the filter. There has been people making 1000 on 3/8ths line and some approaching that on e-85.
@PROJustinSane8 жыл бұрын
+Inzone LOL 3/8 is hard to get past 800 with you really need to work the pump hard
@RiversideRacecraft8 жыл бұрын
On e85 I can see that.
@Jmprofessionalimagin8 жыл бұрын
+Justin Sane great videos, well detailed, I have a 1970 Chevelle El Camino and I are selling a motor L33 aluminum 2004 and ls1intake manifold, LJMS stage 3, valve spring and have a turbine r.70-.96a/r,horse power few hold that engine whithout any problem?flat piston
@hmcracing18 жыл бұрын
what were you racing on the first slip a fiesta
@Moretrailsmorecamping7 жыл бұрын
Whos car is this i just seen it at race legal in san digo ca
@alexthompson64605 жыл бұрын
what do u think it is roughly horse power this car is insane
@griffsrearmountturbothemod16239 жыл бұрын
loving the vids. was that ngk 7 ?
@PROJustinSane9 жыл бұрын
Yes it has 7s in it now
@s.v.gadder14436 жыл бұрын
Have you tried nkg spark plugs?
@richardguerra64718 жыл бұрын
hey partner what differential you are using? did you have to change everything or you used the stock?
@PROJustinSane8 жыл бұрын
Ford 8.8 from a 95 mustang
@richardguerra64718 жыл бұрын
+Justin Sane OK thank you partner
@zacgoode18349 жыл бұрын
What fuel? That's awesome!
@PROJustinSane9 жыл бұрын
+Zac Goode 93 and meth
@63vettuser385 жыл бұрын
What rearend is under it..
@8wireracing6947 жыл бұрын
you would think those pumps should all do the job. do you run a data logger etc.
@coryhaynes87557 жыл бұрын
Clint Collins Collins this guy won't answer you for about the next 15 years
@8wireracing6947 жыл бұрын
CORY HAYNES oh no what he do lol.
@coryhaynes87557 жыл бұрын
Clint Collins Collins type Craig poust into Google
@Bigsky19914 жыл бұрын
"Porsch-uh" pleeeeeaaaaasssse!
@jarjarlol9 жыл бұрын
Whats race weight without you in it?
@PROJustinSane9 жыл бұрын
Stock curb weight of a 83 944 is 2830. Im guessing it's just around 3000 to 3100 ibs.
@norteracing78905 жыл бұрын
You sell it?
@helalsulieman9 жыл бұрын
motor?
@happyfox7116 жыл бұрын
Total car-rape. Just forced it in there.. it was already aluminium, though..pretty crazy build, must be fun on the track. Has it blown up yet ?
@ryanbarbolt36917 жыл бұрын
Need bigger injectors bro.
@s.v.gadder14436 жыл бұрын
Ryan Barbolt boost-a pump and a fmu will work just fine
@marklangren3142 Жыл бұрын
Butcher. Por-sha
@SoFLaZ068 жыл бұрын
maybe I missed it, what Precision turbo is that? what size downpipe