Beginner Blender 4.0 Tutorial - Part 3: Modelling the Icing

[@anzaklaynimation]

He always finds a way to teach something new, despite he is building the same thing fourth time. He is a very good teacher. He also adds an entertainment factor in his tutorials to not make his pupils bored.

[@JimyRoze]

Agreed

[@ausaiden]

Good comment. I had to start again from scratch four times before I realized where I was making the same error. Which is really a good way to learn. Ended up understanding better exactly what each option actually did.

[@Donut33968]

I am donut.

[@shadowking773]

@@Donut33968 nom nom 😋

[@connorbeekhuizen]

i am so glad i have him to teach me lol

[@-_lIl_-]

Unlike many other tutorials that always either skip over crucial detail like how to even start editing the node, or always goes too slow and tells you each individual step like (move your mouse. Click on the left mouse button. Move away from the button.) etc, your ones are perfect. While some of the keybinds aren't the same as on my computer, a simple search easily fixes these problems. [ You earned a new subscriber! ]

[@tryoxiss]

WIth the face project bit, if anyone else is having trouble "Project to individual elements" is a CHECKBOX now, diffrent from how it is in the video. Took me like 10m to figure out and hope this helps someone.

[@zellot_gaming]

I knew someone would answer this question somewhere here :D

[@BubblegumKoi]

thank youuu

[@aliyaakhunova1006]

oh my god thanks

[@Name-qh7rq]

THANK YOU

[@stationgame6827]

Life saver

[@2009heyhow]

I consider myself a advanced Blender user. Yet i catch myself watching and doing these donut series. Because somehow he comes up with stuff that i never used before. Such as changing the inner crease in the solidify edge data. I've never played around with that, and now i can think of multiple situations when i wished i knew this earlier.

[@Lair_in_Limbo]

I just want you to know that I am an art student in college, pursuing an animation degree. My Illustration teacher actually recommended I watch your tutorials and learn blender since I am ahead of the class. This is to help me make a pub scene for an animatic I am working on, so that I don't have to be fussing around with perspective in the drawing process. This is so clear and easy to follow! I hear about Blender being a nightmare, and maybe it has something to do with me being an art student in college, but I actually find this to be less intimidating than I ever thought it would be thanks to you!

[@Lair_in_Limbo]

@Colesia_EMA good luck to you too, your break will come. I can feel it

[@reclaimthunder9254]

@@Lair_in_Limbo Who is bro conversating with.

[@Lair_in_Limbo]

@@reclaimthunder9254 someone deleted their comment.

[@fright747]

@@reclaimthunder9254 ur mum

[@Addijoshua]

No1 Quick tip at 09:15 for beginners. Kindly take note so that you dont run into issues. Modifiers are applied only in Object Mode. You cant do that in Edit mode so you should take note. How to move from Edit mode to Object mode, you hit Tab or you go to the top left side of your screen below the Blender icon row, You see Edit mode, click it and then a drop down appears then you select object mode, Then you can go ahead and apply the modifier at the modifier panel. Stay blessed No.2 You might find out that when you click and drag down, Your icing still goes through the donut's body and I faced similar issue. The reason is that you didnt select the tip of the icing at the middle part (Vertexes) To get around this problem. Toggle to X Ray mode. This is at the top right conor of your viewport on top of the axis gizmo or XYZ axis indicator. You see 2 boxes, and 3 globes. choose the 2 boxes icon so you can see the vertexes and you would immediately notice that you didnt select the middle vertex or the tip of the icing.

[@Arunash97]

Bro Thank you actually I was stuck in this part your comment helped me ❤

[@eleanors3496]

Thank you! I was in the comment section looking for why my "Apply" was greyed out!

[@shwarmashwar1415]

Legend

[@kucekto]

Thanks!

[@ULLR-]

I am legitimately in this comment section to work out why i could not apply it. THANK YOU!

[@LearningBees]

Thanks for another great tutorial! I have a few tips for people running into problems: 1. If the bottom edge of the icing is hidden inside the donut body, you can select the bottom edge to scale it up a little bit on x-y plane. 2. The key combintation to select more on my PC is control-numpad +, not control-+ 3. Some of my icing was clipped by donut body after I pulled down the bottom edge. I selected a vertex on icing, and used ALT-S with proximity editing to push it out to fix the clipping. I struggled a lot with the icing part in the previous version of this tutorial. This version is much better on a few details, I had far less trouble to follow along. Well done!

[@supersauce6142]

thankssss

[@topjben]

Thank you for your tips! Do you know why face snap wouldn't work? I tried to apply scale to both objects but it still does not work :s

[@blackhoundrise8431]

Thank you. this helped coz i was panicking wondering where the bottom edge of the icing had gone on mine. 👍🏾👍🏾❤❤

[@SchweinchenJ]

Thank you so much!

[@TheLuxaryLuxray]

W Comment

[@vincentlprt]

For those who are still having the issue with the icing going through the donut, I found a solution by clicking on the "Snap" menu and checking the "Project individual elements" box. I'm a beginner myself, so I don't fully understand how this checkbox works, but it did the trick for me. Good luck with your donut creations!

[@eg6694]

This literally solved my issue! Other people’s advice wasn’t working, this did the trick thankss 😅😅

[@alisaffankokoglu9053]

If there are ones still having problem even after this solution they may increase the thickness in the solidify at first if they did not. At least these two solved my problem and currently it works.

[@BubblegumKoi]

i believe thats the option that worked the same as how the "face" one did in the video, but they changed what it was called and gave something else the "face" name

[@matiasnahuelenriquez9845]

geniuus

[@estebanmoraga3126]

No idea if they changed it yet again or what, but the option I found was "Snap Individual Elements to:" and selected "Face Project" and that did the trick for me!

[@botepaw452]

Wow! The fact this experienced teacher goes through the steps slowly and little by little is really helpful. So excited to continue working on my donut!

[@BlindingSun_]

how's your donut looking?

[@botepaw452]

@@BlindingSun_ Terrible. Had to restart two times.

[@yayayyaf]

Does anyone know how to eat the donut? I blended my laptop thinking that I’ll get a donut. I keep failing, please help! I only have a few laptops left

[@colRobinOlds]

Honestly these got so much better over the years. For the first time I tried to create donut in blender 2.7 back in 2021, it was like THE first thing I tried to do in blender ever, and so many things were unclear and required searching for answers on the internet, this is just a smooth sail from start to finish so far, I love it and I know people who will open blender for the first time will love it too

[@DangericeDreams]

You made it to part 3, great job! The icing is one of the most fun parts of the donut-building process. If you are struggling to get the vertices on the drippy parts right, take a step back, breathe, and start over on the icing if you need to. There’s no rush, and they don’t need to look perfect. Just take your time. It’ll turn out great!

[@joelt7869]

haha the way you speak sounds like you are talking to a mentally unstable person that will have a meltdown. but that was me when I did the donut tutorial in 2019.

[@DangericeDreams]

@@joelt7869 Funny enough, I’m literally just pulling from previous experience working on these donuts. 😅 It’s fun stuff, but it really can feel a bit overwhelming for people just starting out. I’m glad I’m not the only one that’s felt this way. :)

[@bloodylizard3158]

@@DangericeDreamsbe a therapist, like actually.

[@Fragu1308]

I'm using the same version as Andrew is but I don't have the snap to face option, instead I have the snap project directly. Is this fine?

[@daakshadhaanvi7469]

Thanks man =)

[@mhhilex]

I've been doing Blender for more than 2 years now and this is the first time I watch a donut tutorial! I knew there's gonna be something that I didn't know about... thank you.

[@Yetta-meta]

By far the most difficult. I had to restart and took me 2 hours to finish this episode. I don’t regret it because it looks so good even without color

[@mwah4rae]

omg i thought i was trippin cuz ts one is definitely a bit more difficult than the others 😭

[@TheManudo00]

@@mwah4rae Its all on getting used to the hotkeys TRUST ME there is a lot of try and error i started before with a different tutorial from another youtuber so i already knew a lot of of the hotkeys for what he wanted to do, and it still took me about half an hour, dont give up

[@axel3689]

@@TheManudo00 u think you'll beat dortmund?

[@jackylynmendoza1799]

RIGHT made me almost give up XD

[@EDJK_]

right there with you!!! everything else was a piece of cake but the damn icing for some reason was the most difficult 😭 it actually took me a few days to finish this episode now I finally got the donut mastered icing too once I realized he was purposely messing up the icing model having us worried n scared 😂

[@WorstAvenger]

I was trying it with the older tutorial series not realising why the clipping issues kept happening. Retried the series twice before realizing i was in a newer version of blender. Finally got through with this part and feel so happy. Thank you for making this series so accesible!

[@HonestGameDev]

I've been putting of learning blender (to any degree) for years, but I'm glad I started with this series, amazing quality. The pace is also great, not to slow or fluffy. Great work!

[@l_sx8722]

In 12:20, if your ctrl + zooms instead of selecting more, try to use the + on the number section on the most right of your keyboard

[@autumnGH]

thanks

[@cobalt610]

i dont have 2 +s

[@Vykrex]

Lifesaver, I was going nuts. Thanks!

[@future7040]

thank you

[@agentclol]

I have a TKL keyboard 😭 nah but i just rebinded most of my numpad stuff, im jk

[@xeriesart]

Man this is a throwback to see a new version, I was starting blender right when the last one was posted and it was the first tutorial I ever followed. Thanks for starting mine and many others Blender journeys Blender Guru!

[@Einhorn-ut1mm]

It's a real pleasure to watch your tutorials because you really explain things in a beginner's way but still go into depth. Thank you for being such a good teacher.

[@AsmaAlabri.]

Without any introductions, you are a superhero. You are literally capable of solving any problem you encounter👍🏻👍🏻

[@Chromeshell]

I've never really been much for creating things or felt like i had an artistic bone in my body, but i got actual chills when i got to the end of this one and saw how my donut was coming together. This is so much fun i cant wait to learn more.

[@elizabethivy1337]

It's funny to be back to watching Blender videos. It was one of the first software packages I learned several years ago when I was starting my 3D journey. I didn't stick with it because I was told that Maya was necessary to get a job in the industry. So, I learned Maya. Then, I got my first 3D job, which is where I still work now, and come to find out that the department uses 3DS Max. So, I Iearned Max. Now, Blender has received exponentially more updates and improvements than Maya and Max and is accepted in the industry. I'm tired of paying a lot of money on software subscriptions and dealing with rigid/limited functionality. So, now I'm learning Blender again, but with great gratitude for such organized and clear tutorials. Thank you for making these great videos and putting them out there for everyone to benefit from!

[@Wiifan5551]

I started out learning Maya in high school, but Blender is great because it's free lol If I may ask, where do you work?

[@elizabethivy1337]

@Wiifan5551 I work for Ashley furniture in their CGI department. The focus is mainly archviz content, so the models I make and QA are mostly high poly, but we also work with other folks to convert everything to low poly for AR/VR usage.

[@NoSQLKnowHow]

For the selecting and hiding of the internals of the icing and adding and removing rings of vertices from the selection, make sure to use the number pad's + key, not the plus on the row with numbers below F12.

[@popcat952]

thanks, it confused me.

[@seasonsarecool]

thank you! ctrl + + was just zooming in the view, this helped

[@qwerty-lu3wd]

thank you so much T_T

[@divyanshdivyansh7351]

Thanks even if it dosent help muhc I have an 60% Key Board ＞﹏＜

[@xenoglossia_ch]

thank you! i don't have a numpad so i was very confused.

[@Dylanh93186]

I've been using Blender on and off since 2018 and I've done all your Donut tutorials so far. I've modeled other stuff, this admittedly DOES become basic, but the less button presses you have to learn, the more you see why even basic scenes look great :) There's a lot to learn even if you've done it before :)

[@jeffreykennedy9614]

You are a saint, just picking up 3d stuff because its free and interesting. I have to say you make this feel so fun and a goal that can actually be reached.

[@fusion8984]

Been cooking up my donut for the last two/three days and just got got through part 3. Thanks for your help my dude, wish me luck boys!

[@toerti9589]

It's like the seventh time i started this tutorial over the years, and it's still a pleasure listening. Thx for the great content.

[@at0mly]

I started doing your Blender tutorial on a whim last week and had gotten most of the way through it when I got excited about Blender so I started watching your other videos and reading your blog only to find out that Blender 4.0 was coming out the next day, so now I'm thrilled to get to go through this brand new tutorial series with the new version! Thanks for doing what you do!

[@ABCDFG-vc8so]

Man… after like 20 minutes of working to try and solve what went wrong when I did this… i was gracefully rewarded with a crash.

[@KRLAs]

donut bros, we're all gonna make this donut inshallah

[@babytiny5807]

inshallah your icing drips as allah wills it to

[@MuhammadDaudJan]

inshallah

[@roostergamer786]

Inshallah

[@NamMyohoRengeKyo-d9u]

inshallah😤

[@realnecromancer]

finished that donut yet bro?

[@KhalilCh]

Try Shrinkwrap modifier for the icing, in that way you don't need to apply Subdivision modifier and also if for some reason you want to do any change to the main donut the icing will follow

[@thebaotranphan7981]

Shrinkwrap is an advanced modifier, all these actions on the video are for beginners to understand and appl the 20% basic

[@superkaboose1066]

Your newsletter is literally the only one I have, and it does not disappoint, highly recommend :)

[@IsaiahTimm]

There's something so cool about these videos. Like if you're struggling on something, you might get frustrated. But then you remember, you're just making a delicious donut.

[@jakebrenneman5132]

@13:49 -- That middle-mouse click axis-snapping trick has to be the most helpful trick anyone's taught me on this program.

[@solo.3283]

i agree & this tip is really new on the 2024 tutorial as well!

[@Jada.Befr1]

This was probably the best part, because it's so easy to mess things up. I had to go back about 4 times, was like an extra 20 mins but worth it because I understood how everything was working, got used to things, realized my mistakes & fixed things.

[@Lamis-j7c]

can you help me with icing? cuz when i select and drag one, it all drag down with it :(

[@jorgetavares3234]

​@@Lamis-j7c I had the same problem as u, heres the solution: 7:09 when he selects "Proportional Editing Objects" u can see that cicle right? So u probably cant see it in urs cuz its to expanded, try scrolling down with ur middle mouse button while in edit mode with that option activated until it appears, then only the vertices within the circle area will move. That sould solve ur problem

[@Lamis-j7c]

@@jorgetavares3234 Woah thank you so much i’ll try it and tell you if it works:3!

[@jorgetavares3234]

@@Lamis-j7c wish u luck buddy

[@imaginerie468]

in 9:45 if your "apply modifier" is greyed, make sure you temporarily switch to Object mode instead of Edit mode. It should work then (actually you can see it changing on Andrew's screen if you pay attention, which I didn't :) )

[@vapor_jem]

THANK YOU, HOLY-

[@brounee2]

I click it and it says ''the modifier is disabled, omiting its application''

[@brounee2]

now I fixed it, but I dont see the vertices anymore help this is giving me a headache

[@Addijoshua]

@@brounee2 Look to the right side of your viewport and see where your objects names are which he reffered as the inventory and be sure you selected the icing. After clicking it, bring your mouse to the viewport or where the donut is and then hit tab to go back to edit mode and then you will see your vertexes back. Bless

[@benjamindemontgomery6317]

NO matter what i do my modifier just disappear. is this a bug?

[@sda9650]

duplicate - shift+d cancelling movement - esc(escape) or right clicking naming objects - select object name in outliner or F2 switching modes - tab box select - right click and dragging out a box toggle x-ray orthographic mode delete - vertices etc. z fighting add modifier - generate - solidify render properties - offset thickness hiding a modifier from viewport snapping vertices to face snap individual elements to - face project applying a modifier select more / less tool - ctrl + "+" for more - crtl + "-" for less hide - h unhide - alt+ h edge data - crease inner selecting multiple vertices - shift then select next vertice extrude - e

[@sda9650]

thankx 👍

[@baconwithglassesb]

For these ones, who don't have time to watch a whole video: 1:10 - Duplicating (Shift + D) (Right click to cancel) 2:12 - F2 to name object 3:03 - Toggle X-Ray 4:03 - ... 5:11 - New modifier 6:31 - Viewport 7:05 - Again proportional tool 7:43 - Snap tool 8:25 - Face project 9:40 - Adding more geometry 11:32 - Ctrl + [ + ] 12:23 - H and Alt + H to unhide 13:40 - Click Tap then holding G in edit mode to switch axis 15:49 - Adding another modifier 16:39 - Changing the settings of solidify 18:06 - Hit E to duplicate (Tap + D to draw)

[@skeletonplayz7149]

After a year of modeling this tutorial helped me learn thank you

[@marcinmon7551]

Another great tutorial! I love how you explain things, without skipping basic yet important details. And how you add a quick troubleshooting section :)

[@explodinnoob]

No matter how many tries, I somehow managed to make myself never clip the icing properly

[@rishilmangukiya]

Same it's so hard

[@necauqua]

Instead of rummaging through menus there's a SINGLE magic keybind everyone should know - it's F3 - it opens the "command palette", aka searching through all the menus/actions :)

[@randomhistorystuff165]

"Welcome back to the donut show where we make sad little donuts that we cannot eat." Love it!

[@oliibomb]

im sure youve heard this a lot but i just wanted to thank you so much for actually explaining WHY you do certain things, your tutorials are the only ones ive found that actually *teach*. wonderful

[@jaysonc6998]

I Love how engaging he is, so funny and easy to follow, explaining everything he's doing

[@AitCollini]

A new generation of 3D artists is emerging right now, watching it))

[@quewinhuman2371]

Yaaay part 3! Following and learning as you post. You are a blender legend. Thanks for this!

[@hoseinqadam]

The control + Plus command he is referring to at the 12:00 mark is the plus that is on the numpad, not on number row (just had to point it out as I was stupid enough to be doing this and not know why I was zooming in and out).

[@notyours7779]

I was so confused as well, thank you so much For those of you with laptops, it would be 'Ctrl, Fn, ?' The '?' key can also be used for '/' and the '+'

[@Bisho_S]

Hi Andrew. I started a couple of years ago in Blender, but got caught up in other stuff. I returned to Blender recently, and to my surprise, you made an updated tutorial! I can see clearly how much effort you put into discussing small problems that we might face in certain parts. So just wanna say: Wow! You are an amazing teacher. Keep going🦾

[@a1herodude]

After so many years of heling people out with this program, you deserve all the subscribers you can get!

[@jaynethejester]

I suffered so much from the icing 😂😂😂

[@minotaursgamezone]

thank you for making this. blender 4.0 is quite difficult for me and this series is a huge help

[@rAtentg]

As in the older tutorials, when you're doing the icing, try looking at donut references to make it look more natural.

[@Sin_Alder]

Ideally using real donuts, picked up either at your local bakery or a grocery store. Not necessarily for practical reasons (although yes), but primarily so you have delicious chunks of frosted/glazed fried dough to munch on.

[@badcow2]

This is my third time going through this tutorial series, since I keep making small mistakes that ruin the whole thing, which is entirely my fault. The only thing keeping me going through all this again is that he keeps making himself laugh. Great energy for a tutorial!

[@fkalrc]

just wanna say that ive followed donut (and other) tutorials from you over the years and that this series is so well made and easy to follow. Very thankful for your guidance 🙏

[@Panxho_.]

Hiii 😁 , If you are having trouble creating a wavy edge (at 13:05) and you do not have a mouse or are having trouble with your mouse wheel, you may notice that moving vertices affects everything. This is because the Proportional Editing Influence radius has not been decreased, causing everything to move by default. To fix this, simply use the mouse wheel (the most optimal method) or press Page Up to increase and Page Down to decrease the radius. Once you have done this, you can shape the icing as desired .

[@BabaYaga4554]

Thanks Man

[@thegoodally101]

Thank you so much

[@divyadharshini234]

Bro but I don't have mouse.....what to do?

[@jscobbbb]

bro thank you so much I thought my stuff was tweaking

[@tami7992]

Omg thanks, that explains my issues, thanks a lot

[@Ghosted_Gaming1]

i crashed my blender

[@Iowwicked]

I crashed my lap

[@andy-gamer]

I crashed my car

[@jrgamerelite5287]

I crashed my fridge

[@PlanegeekYT]

Me to😢

[@Ector_902]

I crashed my life because that fricking 3 year old crawled into the road

When talking about applying the subdivision modifier at 09:15 it may be useful to note one detail: By doing so, you apply the modifier to the entire object *and* *then* *remove* *it* *from* *the* *set* *of* *all* *modifiers* . I was slightly confused that, after applying, it vanished from my view :)

[@zy2239]

So it is not a bug, it just dissapears ??

[@bloomleebuilds]

Every drip came with a squeal of JOY!😆😁

[@EDJK_]

finally and I mean finally mastered this DAMN DONUT ICING 🥴💯 it took me approximately 8 days to complete it but now it’s tacked in my memory I can’t unforget it 🤣 but throughout the 8 day process I mastered the sculpting tools the Inflate, Grab, Mask, Mesh, and Smooth tools in 2 days but I refused to move forward to the next video which is shading which is Part 5 until I had the ICING aced and I finally did it 😩😮‍💨 now onto Part 5 and completing the rest of this series to whomever see’s this and it’s your first run with Blender YOU GOT THIS 🤝🏿💯 in 8 days I went from being on and off with Blender since I was 12 to now at age 26 learning the donut and building it along with the sculpting in less than 10 mins now and just getting started!!! now im extremely confident and can’t wait to see where my animating journey takes me 🏁

[@leonidaltman]

Who knew deleting the bottom half of a mesh could feel as satisfying as eating the top half of a real donut? 🍩

[@Akomarongg]

10:17, go to object preferences > viewport > tick "infront" it stops the mesh snapping to the inside and forces all mesh faces to the surface

[@anniegao2973]

Where do i find the object preferences? Is it just blender preferences? Im on blender 3.3

[@afafmellaha]

i cant find it in blender 4.0

[@Spider-ManMarvellous]

GOD Bless you and your generations

[@savageopress1753]

This is an absolutely awesome tutorial series as always. I have been here since the blender 2.8x days. Too bad my computer is to old to be able to run blender 4.0. :(

[@andriimarchuk8121]

It doesn't need a new version so far to follow this tutorial

[@kieranmaxson5269]

@@andriimarchuk8121 I got about halfway through this video before I realized I was using 2.92 instead of 4.0. I only realized cause the all components face snapping option wasn't there. Kind of cool how similar the UI was kept while adding new features

[@AlexRodriguez-py3em]

This tutorial might have taken my a few hours but it was so worth it!

[@MedievalPancake-r6w]

Best tutorial i have found, includes a mix of humor and excellent teaching to keep you entertained while learning. Great Job!!

[@SomeInternetSpider]

11:55 If Ctrl + (+) didn't work for you and zoomed in instead, select the + on the numberpad.

[@alexm9104]

If you have one, ahahahahaha... ha... Why Blender default keybindings are so weird?

[@Itzame3756]

Thank you, I hope the other side of your pillow is so cold when you flip it tonight

[@Smybi]

​@@alexm9104do you know how to do if you don't have one?

[@elitusdelitus1509]

@@alexm9104I really do need to know

[@lumberjacklucci3018]

If you find that the bottom of your icing mesh is hiding beneath the donut after editing a vertex, you can fix it by resnapping the entire outside bottom row of vertices to the face of the donut. You do this by Alt + Click a vertex on the bottom row which should select the entire ring. Then change your snapping to "Face nearest" once you edit it will snap to the closest face, which would by the outside of the donut on it's corresponding side. If you snap with "Face Project" it will take all the vertices and snap them towards the face you're looking at. Once you hit the edit button "G" everything will snap to the face accordingly and then you can left click to commit the snapping.

[@elaobornikova4479]

you're a lifesaver! Thank you

[@inva5866]

Thank you, I'll remember you till the next vid drop Thanks for helping I've been stuck from 12am and coz of you i can sleep early thank you just thank you (Even though it doesn't exactly create a desired wavy edge as the face snaps to the nearest) but still i just wanna sleeep😭

[@i.am.ilarian]

At 11:45 if Alt + Click doesn't work and you can't figure out why, go to preferences and disable the "Emulate 3 Button Mouse" option from Input menu, you might have left it on from the previous parts. (That's what I did and couldn't figure out why it doesn't work)

[@AV0O0]

Thanks a lot Bro 🙏 ❤

[@freetheflower69420]

First time ever using blender in my life. 30 and wanting to learn something new, something I have been wanting to learn for a very long time. my donut looks great so far and I feel excited, you make it so easy to learn and remember. thank you :')

[@saucererT0j1]

The subdivision modifier should be on 1 if you are following the tutorial. If you have it on 2 and apply the subdivision modifier, you will get many more points than you need and it will complicate things for you. Thank you blender Guru, you have made learning this very simple. May God bless you abundantly

[@avishkkashyap8110]

the edge of extrusion at 19:10 is not circular in my case it is a straight line

[@lindsaysepicjourney]

same idk what to do

[@wirenomad]

same here :(

[@emmagamble795]

I was having the same problem and realized my subdivision modifier was gone. I guess I closed it somehow. But adding it back made the extrusion drips look round instead of straight lines

[@BBFunimation]

same happening here.

[@niceman567]

I had the same problem, 2 steps that fixed mine 1) add subdivision and place the order below the solidifier 2) Set the Levels viewport of the subdivision to 2. He mentioned step 1 but I am not sure if step 2 is the best practice as he didn't do that, but that rounded my drip, I guess the drawback is it will increase the size of the mesh.

[@optimallyace5824]

Modelling the icing is hard

[@rik9045]

Yeah😂😂

[@ligmachad69]

if u cant apply remember u need to be out of edit mode to apply

[@henrylootens6578]

THIS IS WHAT I NEEDED

[@CiandieArt]

thank you, you saved my ass. i was so close to crying coz i was doing exactly as he didn't but i couldn't see apply ;___;

[@ligmachad69]

@@CiandieArt welcome i arl quit it cuz i got bored but dont quit ok if you finish the donot upload it to your yt and reply to this comment

[@Tschüss101]

This guy maaaaaaaaan. Bro you run into the simplest problem and when you ask the discord the explain and help you out. Huge W ngl!

[@welshspaceagency]

This is a great demonstration of how to make tutorial videos. Completely faultless. Well done Sir.

[@KhalilHadjir]

hello darkness my old friend

[@smollnerd8591]

"Increase the thickness to 0.25-" sir my donut looks like a mushroom now.

[@ZeroOneClips]

I'm not seeing the "Snap individual elements to" option at 8:30

[@thegoodally101]

Me too, im stuck

[@carrotized]

@@thegoodally101 I think it has to do with the version of blender you're using; I started the tutorial yesterday and ran into the same problem but it was because I was using 2.91 blender lol

[@tobyaldous2027]

@@carrotizedyou just need to click ‘align rotation to target’

[@user-yr9de6oz3v]

I don't think it helps xd but I think they changed it, have the option to click like he did it, If not, when you are in editing mode (viewing the vertices), at the top in the "second" menu section, there will be a section that will say face, try to "extrude individual faces", in addition to that, check again to have all the buttons that he has on, I spent minutes seeing why moving several vertices didn't work and then I realized that I was missing "proportional editing"

[@Agent_427]

The option is there for me but it doesn't work as intended :(

[@kiana8286]

I gotta learn 3D for my studies and in class we work with cinema 4D. It's what the uni wants, so the prof has to do it, even though he says it blender is the future. I didn't quite see why I should learn with a program that's already outdated plus costs a lot for a student where money's tight. So me being me I took the hard way and was kinda on my own, due to classes being in a different program. I am so grateful for this series, thank you so much. I first tried to do stuff on my own and find it out via trial and error (which works just fine e.g. for lots graphic programs), but I was way too overwhelmed with everything. So the biggest thank you to you, this series has helped me so much already and I'm sure it will in the future as well 😃

[@MK185EDITOR]

You are the king in blender. Nobody can beat you. Blender Guru is always the best . I have subscribed you from this moment.

[@camillelaud2859]

Good tutorial. Your lessons are prescious. About 18:49 ... For some reason I can't afford making a spheric drop of the icing: It makes a square shape drop not what it supposed to looks like in the video, when I slide the ridges while tapping E. It doesn't even following the liquid shape around the edges, it's geometrical. Can somebody please help me?

[@marsh_og]

same problem with me need help

[@MidirSD]

Same

[@SarmK]

add the subdivision modifier back

[@SarmK]

@@marsh_og add the subdivision modifier back

[@Dr.Cereal]

same

[@incineratorfilms]

petition here to get Blender to change 'torus' to 'donut' in next update

[@ghazalnosratzad3286]

I thought I was the only one struggling on this episode, but when I ended up in the comments, the comments are funny, motivating and informative! What a community!

[@michaelmccoll4612]

Wow, you really are good at explaining things in a digestible manner! I'm a high school art teacher and I want to explore Blender with some of my Media Arts students.. Thanks for these videos!!!

[@thesansofallsans3118]

At 8:45 i can’t make the points not clip through the donut! There is no option for snap to face! Only snap to face project :(

[@_marmi]

The part of the icing just disappeared and I was like "who tf ate the icing" 😭😭

[@lindsaysepicjourney]

18:49 my drips are flat at the end instead of circular

[@marsh_og]

same here

[@arksi6742]

@@marsh_og Make sure you generate another subdivision Surface after applying it the first time. it will smooth out your extrusions.

[@niceman567]

I had the same problem, 2 steps that fixed mine 1) add subdivision and place the order below the solidifier 2) Set the Levels viewport of the subdivision to 2. He mentioned step 1 but I am not sure if step 2 is the best practice as he didn't do that, but that rounded my drip, I guess the drawback is it will increase the size of the mesh.

[@tami7992]

Same here

[@tami7992]

@@arksi6742 thanks a lot, that fixed my issue

[@estherkeba24]

You're a good teacher ☺️ i downloaded your full course now I'm in part 4 no confusion and I'm happy to learn. Thank you sir 🙂

[@bodybuilder5043]

Me and my friend are now learning blender videos, yesterday we were heartbroken because we saw a blender video that looked amazing. Now we have begun our journey as 3d artist. This guy is helping us immensly :D day 2 video nr. 3 lets gooo

[@YourDailyWeirdness]

at 8:25 i couldnt find what he was talking about on my pc 😭

[@Karlush]

Modifying the Edge Data > Crease inner has no effect on the shape on the icing for me.. I'm on Blender v4.0.1

[@ChibiChunks]

Same for me, idk how to fix it other than maybe join the objects?

[@criscringle6627]

Same. Ever find a solution?

[@criscringle6627]

Nvm I think I figured it out. @15:48 -- For whatever reason, having that second "subdivion" modifier added, it then was able to make a difference when I changed the initial "solidify" modifier edge data.

[@LaserGadgets]

So far it all seems smart and simple, but I am waiting for the little cylinders I have to shape and add one by one for the sprinkles xD

[@Kaffelag]

So far it has been very easy to understand and follow your instructions 😊

[@6sixela6]

for the people like me Ctrl z is undo

[@ReaIHuman]

Thank you.

[@tylergautier826]

Shift+Ctrl+Z to redo if you go back to far!

[@xshaylise]

When I duplicate the donut, the icing layer is a bit bigger than the donut and isn't z fighting/colliding, its causing me some issues and I'm not sure what to do. Any tips or solutions?

[@aaronmvarghese6467]

4:05 , here when i try to do it its deleting my orginal mesh also that is the icing aswell as the donut is getting deleted ....does anybody knows the solution to this

[@justcomingteasers]

same here

[@SteemisNotthemaincharacter]

Did you duplicate with shift d

[@LupoBattistel]

You have to sublimate with shift d not alt d

[@LupoBattistel]

Ok?

[@abdostaslam]

@@LupoBattistel hello, how are we supposed to do that? in the object mode or in the edit mode, i am still stuck in this part

[@panfull]

Another returning to my roots tip. after duplicating and scaling the top for icing. I add a cloth modifier to it, a collision to the donut and hit play. it nicely plops itself un-uniformly around the donut. Apply the cloth modifier and shrink wrap and voile. fast and great looking icing.

[@lboyk]

I could not get snapping to work successfully, and after about 5 tries, I finally found what I had missed. see 8:30 options for the snap with options. If you do NOT have selected in blender what Blender Guru has selected/highlighted, snapping the icing to the donut will not work. hopefully, this will help somebody, and save some time. Great video, by the way. Thanks so much!

[@juliakutsmida5067]

On 4:20 min when i cut the bottom of 2nd torus they cut also the bottom in the 1st one. i selected only 1 of them but both are without the bottom. What to do? Please help

[@targetzero100]

I'm going to sound like I'm nitpicking, because I am. As a brand new user, I need meticulous explanation of things which isn't happening. You speak and move a little too fast and didn't explain the fact that as you add modifiers they stack up in the lower right hand window. Also, I'm not sure, but if you have a modifier like subdivision already assigned to an object, you can go back and scroll through the lower right hand window and find that Modifier and hit APPLY to add more subdivisions to that object, correct? Instead why can't you type in a new value for the amount of vertices if you want more? Hitting apply seems to be adding another instance of the same operation you've already done to the object. This app has non-destructive editing, correct?

[@aydenlivezey6762]

Bro needs a nap😂😂😂

[@aronhelios1734]

The modifiers are the non-destructive edit. They can be removed anytime by hiding from viewport or deleting them. If you apply them, you have changed you mesh in a permanent way. And they keep the file light, you don't want to have too many vertices.

[@WhatsUpWill]

At 4:00 why does my whole bottom half disappear

[@okaox7906]

como resolve? skadfksjakmkdas

[@nacholilli100]

@@okaox7906 duplica antes mano

[@oscarfrancoisdesatonaka7217]

you have to duplicate it before perform that action