ASSEMBLING the Travelall! update. 5,000 SUBSCRIBERS!

[@ulbjamn]

One of the most underrated channels on KZbin. Keep up the great work and motivation for all of us!

[@PuddinsFabShop]

Thank you!!

[@joell439]

Joe, I couldn't agree more 👍👍

[@PuddinsFabShop]

🙏🏻🙏🏻

[@joell439]

Randy's work is amazing. Best 'stock' engine wire harness installation I've ever seen. Hang in there. We all understand how unbelievably complicated it is to build from scratch. You're doing a fabulous job and you're really going to enjoy the prize at the end. 👍👍😎👍👍

[@PuddinsFabShop]

I’m ready to enjoy it!

[@ep9360]

Five G to Three Hundred.....Wow. Well deserved through hard work and the Grace of God.❤

[@jeraldhite9744]

You've done a great job!! I'm surprised I haven't seen this in a magazine or in a big show!

[@WWS2]

That espresso is a great choice for cutting glare on the inside of the windshield.

[@tirejockey806]

Coming together real nice. Randy did a great job with the wiring!

[@PuddinsFabShop]

He did!

[@HFG]

My dad has always watched those car build TV shows and for my money, you blow them all away. And, you're not a fake d-bag. You have some of the best content on YT.

[@PuddinsFabShop]

I appreciate that!

[@luzgonzalez2838]

Really interesting videos. It's becoming a cool restorati on without meaning it.Little by little. Best wishes to the family.GBY.

[@billyhong5071]

Thanks for the shoutout Jacob, it was my pleasure. Yours is my favourite KZbin channel - love your work! Congrats on hitting 5000 subscribers, you deserve heaps more. Hopefully catch up for that beer one day.

[@PuddinsFabShop]

Thanks Billy! I appreciate the support. Hopefully!

[@Breadmansgarage]

5,000 has turned into 50,000. Great content 👍. You make my Mondays bearable.🍻

[@PuddinsFabShop]

Thanks!!

[@patpatterson6214]

THis is a great channel... I think it will eventually hit the top of the charts.

[@fishguts4247]

Congrats brother! I knew it wouldn't be long until you topped the 5,000 mark.

[@PuddinsFabShop]

Hopefully it don’t take another 2.5 years to hit 10K!

[@davidbrown-bh7it]

Looking good! Congrats on 5k subscribers!

[@PuddinsFabShop]

Thank you!

[@billvandamme2432]

took awhile to hit your 5k but youve added 7 more k in next 5 months....thats not bad....its a great channel.....see almost caught up 17 more to go....lol

[@PuddinsFabShop]

It took 2.5 years to get 5.7k and 4 weeks to hit 11k!

[@jeaniepatterson2384]

After going back to see all these older videos, I loved them all, and it makes it really nice to see you driving them. Very good content!

[@nateparks4305]

Been watching for a while, way deserving of the 5000 if not a whole lot more. One of my favorite on the tube. Congrats!

[@PuddinsFabShop]

Thanks Nate!

[@earlzerba3855]

Earl in Mi first from 1 vet to anther thank you for service and keep up the good work it look great

[@PuddinsFabShop]

Thank you!

[@talesofanasphaltjockey]

Congrats brother , great to see you finally getting the recognition you deserve .

[@PuddinsFabShop]

It’s a slow process! Haha

[@shanewright6958]

It's coming along nicely 👍👍🇨🇱

[@PuddinsFabShop]

Thank you Shane! 👍🏻

[@rickbonifas5985]

DANG! You do nice work. You're inspiring me to get back to work on my truck.

[@PuddinsFabShop]

Get on it! 👍🏻👍🏻👍🏻

[@USMCShores]

One year ago you were happy for five thousand subscribers now your almost at 140 thousand subscribers.

[@DependableAutoTruck]

performance distributors in memphis tenn makes a killer set of wires and coil packs to fit that 5.3

[@kennethhudson8013]

Top notch work!

[@matthewhutchins4284]

Awesome build man, if I ever needed fab work or wanted someone to build me a truck you would be the one and I live in Virginia lol I like your style on vehicles and you do shit right!! I’ve got to where now I’ll like the video just so I know I’ve watched it but trust me I watch some videos over and over again lol. Your the type of person that should go big and build custom cars. Atleast you got a good attitude and know what you doing and you actually do the work yourself.

[@richo220665]

Congrats on 5000 subs been following you since you posted on quarantine contest on Deboss Garage and love your work and attention to the detail of all your work even admitting when you've screwed up and fixed it so keep up the good work and can't wait see that travel all moving and shaken well done man

[@PuddinsFabShop]

Thanks for following along! I’m ready to shake it down.

[@vincentlawrence5603]

5000 shoot your at the 146k now, rolling on up there buddy. Hell ya brother!!!! Much love from east TX

[@ciscokidfab7595]

You’ve come a long way, just rewatching some “old” stuff.

[@johnfry9010]

Nice progress it is really coming togeather .

[@PuddinsFabShop]

Slowly but surely!

[@gharrison7264]

Congrats on the subs. Keep doing what you are doing. Love the channel and the build. Graeme from down under in NZ.

[@PuddinsFabShop]

Thanks!

[@slamnmerc]

Congrats on 5000 subscribers! Work looks great, keep it up! your excused @ 11:52

[@PuddinsFabShop]

😂thanks!!

[@dac2250]

Another great video Jacob! The dash insert color is a great combo to the dash color!

[@PuddinsFabShop]

I think I’ll like it! If not it’s easy enough to change!

[@gerrygwilson2849]

Awesome job on the way you fixing it up classy

[@billscruggs5170]

Great video it's really coming along you're into the fun stuff now the Creature Comforts. The rewards of taking your time and doing it right. Thinking ahead. Great job that's going to be one cool ride.

[@PuddinsFabShop]

“Fun stuff” hahaha thank you!!!

[@billscruggs5170]

@@PuddinsFabShop rewarding stuff ? Lol.....

[@PuddinsFabShop]

That’s better ! Lol

[@SchysCraftCo.]

Puddin it’s looking really good so far. Can’t wait to more videos

[@nicolasstanley1392]

Any content is great content from you, my man

[@Richard4616]

You have great content on you channel. Your vision and fabrication skills are the best.

[@PuddinsFabShop]

Thank you!!

[@recon66661]

Very cool build thanks for sharing can’t wait for the next video!

[@PuddinsFabShop]

Thanks for watching.

[@jamesdearman814]

what Mr. Karrer says. Fun, Educational, informative - plus PUDDIN'

[@gtmotorsports937]

Awesome to hear you got to 5,000 subscribers! Keep it up! Loving the way you go over every aspect of your build.

[@PuddinsFabShop]

Thank you!

[@fredshipp3809]

Sure like how clean that firewall looks. Thanks for the update. 👍👍

[@PuddinsFabShop]

Thanks for watching.

[@mechanicmike1236]

Congratulations on hitting 5K, coming together well!!

[@PuddinsFabShop]

Thank you!!

[@gordonhenagar6652]

That’s some good progress , glad to see it looking so good.

[@PuddinsFabShop]

Thank you!!

[@Wingnut_Stickman]

Congrats on 5000 subscribers.

[@ronsre-creations5289]

Wiring always sux ! Worst part of a project. Sure is starting to take shape. I like the Australian IH decal. I have a 1952 International Harvester Refrigerator. Still works and is a great cold snack box. Engine looks awsome. Looks Factree ! Thumbs Up! Keep up the great work !

[@PuddinsFabShop]

I’ve actually enjoyed the wiring on this one. And there’s lots of it.! Thanks!

[@Voongi]

Nice progress, the wiring can be pretty time consuming. I always look forward to seeing how much you get done in a short period of time. Congratulations on your 5,000 subs goal.

[@PuddinsFabShop]

I’m enjoying do the wiring on this!

[@TNG76]

Mad to think a year ago you was on 5k now you're at over 100k, bloody well done you deserve it

[@glenhynes3593]

Congratulations on 5K

[@RODDER-hq2tr]

Congrats on the 5000 subs love your channel the best on KZbin 👍🏻

[@PuddinsFabShop]

Damn! That’s a bold statement! Haha thank you!

[@TheGarBrett]

Hot Damn! Watching this when you're at 140k subs right now!

[@recruitmentwebsites]

Lovin your work

[@bannerzone_UK]

I'm watchin the Edna build as your hitting 100k Subscribers

[@geriatricginger]

14 months later, 88.4K! Killin' it, brother!

[@gofastwclass]

Thanks for the cool content. Congrats on the viewers.

[@PuddinsFabShop]

👊🏻👊🏻👍🏻👍🏻

[@buckeyejim2989]

I wanna see ya get 35k this weekend 😁 Old boss told me once, detail brings retail🤔 IMHO Edna is ugly. Pretty don't get r dun. Thanks for sharing the vids 🙏😁👍

[@PuddinsFabShop]

Me too!

[@steveyackel4637]

Keep up the great work

[@MrQdawgs]

In the week or so I been binge watching you went from 39k subs to 42.2k so it’s catching on!!!

[@PuddinsFabShop]

My subs have slowed down some actually the last week or so. I’ll stay at it none the less!

[@MrQdawgs]

@@PuddinsFabShop Slow & Steady wins they race... sometimes haha

[@lorenmeyer5290]

Looooking good!♡♡

[@PuddinsFabShop]

👊🏻

[@aussiejas6599]

HAPPY 5000 SUBBS

[@PuddinsFabShop]

Thanks!

[@jayinmi3706]

Congratulations!

[@PuddinsFabShop]

Thanks!!

[@jayinmi3706]

@@PuddinsFabShop I was showing my GF some of your older videos, and going back through Edna's build, and it's amazing how fast you shot to almost 150k! Congrats again!

[@Bigskyguy56]

Congratulations on 5K Subscribers. You have a GREAT channel. Keep up the great work & keep on keeping on. I enjoy your channel . Would you post the PART NUMBERS for the Holley Front End Accessory Kit.? Stay Real.

[@PuddinsFabShop]

I’ll dig them up in a few.

[@PuddinsFabShop]

Holley 20-134. Once you look it up it will show you the options for the adaptor kit that you have to choose depending on your engine. I got the Gates brand tensioner for the 97 corvette off eBay.

[@Alfie289KCode]

Nice wiring job

[@pas-kv8ud]

5k subscribers!? Hot damn! (You’re at 111k subscribers today. lol)

[@dontblameme6328]

Good stuff.

[@abelburke]

Looks so clean. How hard would it have been to simply run the stock AC compressor? Thanks

[@PuddinsFabShop]

Mounting wise it would of bolted in the factory location. The displacement the factory compressors puts out I believe is more then what is required for the vintage air system. It would work but it wouldn’t get as cold as it will with this.

[@timrayburn2461]

I'm a 66+year old born addicted to hot rods.Stumbled across your channel this morning .After 2 minutes of watching this video and looking back at your previous videos I knew I was hooked.You will do well on You Tube.Where are you located?And yes I did subscribe.

[@PuddinsFabShop]

Thanks Tim! I’m in Oklahoma

[@msloquet]

Hi what motor mounts did u guys use? What Trans r u going with?

[@jayinmi3706]

There is another budget option for the compressor mount. IIRC, you can use an AC bracket from a pre-Vortec 4.3 S-10 and make a slight modification. But it might not work with the Sanden 709. There's a summary of mods at maliburacing.com/forum/threads/a-c-summary.79059/

[@PuddinsFabShop]

Cool deal!

[@peerplaut]

Hey man, you are doing a dual AC Front and Rear. Correct? I'm going to try to do this too. What compressor and Vintage Air Kit did you end up using?

[@PuddinsFabShop]

Yep! I’m using the sanden 709 compressor, the biggest the condenser they have, and you just pic out which units you want to use. I’m using the GEN IV magnum in the front and like Gen II miniunit for the rear. Call vintage air talk to sales and tell them what you’re wanting to do. They will email you a diagram of everything you need and the layout for it.

[@peerplaut]

@@PuddinsFabShop thanks a bunch. you are ahead of me. but I'm right on your ass... :D

[@kennethhudson8013]

Engine looks 😎

[@Q8FAB]

Congratulations 👏

[@PuddinsFabShop]

Thank you!

[@Rbs35405]

Awesome 😊

[@Brandewey]

yay a burp LOL been watching all your vids from the beginning. may i use you burp? :P i kinda wish you did a couple vids a week (or more) but ik with you having a full time job its hard to do. ive noticed you have evoked a lot through your vids and have gotten a lot better being in front of the cam. :D have you ever thought about twitch? or maybe even going live on youtube to do like a filler or something. idk its just a thought :) btw i dont watch many ppls older vids. you are fun to watch and is awesome at what you do even though youre not a master/trained it it :) i was gonna be an auto mechanic after high school then i got 1 year under my belt then i had my kidneys failed. i HS i loved working on small engines and was better then anybody in my class (forget Tecumseh. i could never get them to run again even after throwing all new parts at it. Briggs is my bread and butter) i miss doing it. sucks having all this knowledge and not being able to use it. i had 2 kidney transplants and this second one failed though i was extremely diligent with it compared to the first one (very immature didnt take my meds properly) and it failed due to my mother passing. the docs did everything they could to try to save it with no luck. ive been trying to move to NC where my bestie lives for better support since i have no one here anymore in MO. tried losing weight to get back on the list. ive plateaued. just a lot of things have happened since ive lost the kidney and i cant seem to help climb out of this hole im in. but each time i watch a vid of yours it brings a little joy to me seeing someone doing stuff that i wanted to do after college (maybe not body work but i love drive train stuff) sorry for typing so much. i tried to find a diecast model of a travelall but with no luck. wanted to do a custom car for ya but i have another idea in mind you may like :) hugs love and bee safe :D

[@PuddinsFabShop]

Feel free to use it!

[@virgilastacy5281]

Looks good

[@blindguygarage]

I don't have a channel as successful as yours but I had an idea and it seems to work good on my channel if you take all of the videos you have of the travelall and add them into a playlist then everyone who wants to see the build of the travel all can go to that playlist and watch it video by video KZbin also sees this as another video so you can share the playlist itself and you get more views and more content hours all of that sort of thing it helps the algorithm work for your Channel. And it's easy to do and not a huge amount of extra work or anything

[@robertashbrook3157]

How long did it take on Edna from start to driving it?

[@kennethhudson8013]

What do they expect you to wear in that heat? A tuxedo? DANG!

[@danandyong6653]

Great

[@WWS2]

65K soon! Tuesday or Wednesday at current sub rate (Sept 14/15)

[@JerryBrown-ou4ff]

Here ya go

[@maxhammontree3169]

Nice

[@Tom2112Tom]

Wow, "old" Puddin is soooooo subdued! No offense, Puddin, but I much prefer your more recent vids! Glad you changed it up.

[@oldcarnut3953]

👍🏻👍🏻👍🏻

[@jeffreyc6508]

1st!!!!

[@PuddinsFabShop]

👊🏻👊🏻👊🏻👍🏻👍🏻👍🏻👍🏻💪🏻💪🏻🔥!

[@treasureseekerintheway3515]

Never clicked on so fast.

[@PuddinsFabShop]

It’s a lot of talking people! Sorry!!

[@treasureseekerintheway3515]

@@PuddinsFabShop no need to be sorry, it was still a great video. It's nice to have a variety and change things up every once in a while. :) Great progress!

[@bruceplumisto]

Hot Damn

[@katmandu8208]

👍

[@PuddinsFabShop]

👊🏻👊🏻👊🏻

[@jasonthetalker7253]

Is your sandblasting wet or dry?

[@PuddinsFabShop]

Dry

[@PeterHatch-mx7zc]

Stick to the real you be ok mate!!

[@PuddinsFabShop]

👊🏻👊🏻

[@Adam-vc1xl]

Honestly can't tell this is the same person lol

[@1Corinthians15-1-4-J]

amazing aug 2020 5K subs. now 96k subs,lol huge huge junk in a yrs time

[@THEmryesTV]

Rå