Onkyo TX-RZ70 Web Interface to Configure your AVR!

[@Audioholics]

👉Our channel Partner Audio Advice is having a limited time sale on the Onkyo TX-RZ70 for $1,999: bit.ly/3VUg2yC

[@AJ-zl8bz]

$1,999.00 whoa

[@jamesyencey3438]

Onkyo is a total different build by Kliptch no more HDmi boards problem

[@jesusrodriguez1356]

I am thinking of buying the Onkyo RZ70 from you, but I know that Onkyo had problems with it, which are that it doesn't last very long. What can you tell me about this? Please. I had the Onkyo 609 and it only lasted 4 years.

[@danielschulz9304]

I don't even need an AVR, but between your initial review and Audio Advice awesome price,$2000 i want to buy one. Thanks Gene for all your efforts.

[@NMP660]

+1 on the wishlist to remove zones in favor of more processing channels and adding manual PEQ. Would also love the ability to select other speaker options beyond Klipsch (I'm using Polk). Thanks for the great video, Gene!

[@harrisfogel6992]

Thank you for this video! I had no idea! It's really not mentioned by Onkyo. I have the RZ-30 in for review, and one of the design goals is causing me a bit of havoc. You can't use the OSD (On Screen Display) on 4K TVs, using the MAIN - ARC HDMI port, so you have to switch to the non ARC port (SUB) for the OSD to work. The MAIN is designed for 8K only, while the secondary SUB port is 4K & 8K, so the OSD works via that port only. Having a way to program the AVR from my computer via this trick and interface, means that I don't have to rely on the SUB port and lose ARC compatilibty. I can just work from my laptop. Very, very cool! Thanks! Now, if I could just figure out the implications of the different options...

[@tomhermann6558]

I switched from Denon to the RZ50 two years ago. Still a huge Denon fan, but the value was tough to beat making the jump to ATMOS. I run it as a processor (though I don't believe I have the preamp only mode in the RZ50). As you say Gene, I wish it was a 6 channel atmos platform. I was nervous jumping from Denon, but I have been surprised. With current pricing, huge value prop.

[@weduhpeople8504]

@@tomhermann6558 Yeah I just got the RZ50 and at $999 on Amazon it’s the best bang for my buck. I’m running the Emotiva XPA DR3 for my front stage but had to use my old Denon to run rear surrounds in order to have rear height speakers connected to the internal amp channels on the Onkyo RZ50. Just seeing if it’s worth the $1k jump in cost to get into the RZ70.

[@808lublabs4]

Been watching this AVR for awhile but finally made the jump when this deal came out. At $1999 its well beyond anything else on the market at that price.

[@newt6639]

How are you enjoying it? Looking to buy this AVR.

[@Laissez_Faire]

@@newt6639great unit. I came from an Arcam avr31 that cost twice the price. It’s surprisingly good

[@garylester55]

Thank you Gene for posting detailed videos about this Onkyo receiver a couple of weeks ago, here in Perth Western Australia it was on sale at West Coast HiFI stores for $3,748 normally $5,000 , it’s replacing my Onkyo TX-NR708. I am redoing my home theatre room, I wish I Knew, what I know now about 24 years ago when I had my home built, I included a dedicated room for home theatre, I would have gone 500 millimeters larger, and added stud walls to soundproof it, we build double brick exterior and single brick interior walls, I went with 2.5 metre high ceilings, which is 30 courses of brick, instead of the standard 28 courses. Thank you again, I’ve watched a lot of your videos and learn’t some interesting information. Take care, Gary 😊

[@samhalsey5051]

Because of your reviews and the price plus Dirac, I’m planning to get the Onkyo Rz70 and the SVS ULTRA EVOLUTION PINNACLE speakers…

[@allmtbnzscottbrownhill2896]

I use Zones in my Hobby room and workshop but found it very annoying that the crossover in zone 1 applies to zone 2. My zone 1 had a sub woofer and zone 2 had nothing. Ended up dityching the sub woofer and going to buy 8inch in ceiling speakers to get better bass. Only using SR494 but im sure my RZ50 at the time had the same issue. Just got a RZ70 on sale after watching your videos thanks for the info.

[@henrikwidlund825]

Please always change the passwords, the receiver might not be interesting in itself, but it might have access to other devices on your network, enabling a hacker to use it as a proxy. The proxy can then be used to attack other things in your network, which eventually might result in access to your computer for example.

[@garylester55]

Thank you for this advice 😊

[@what-h3j]

@@henrikwidlund825 this

[@SaunderSchroeder]

Thanks!

[@Laissez_Faire]

I bought the Integra drx8.4 and wow. I'm coming from an Anthem avm70 and an Arcam av41. Never thought I would keep the Integra over the Arcam. The best part about this receiver is the way it got my sub integrating with my speakers. Don't know what Integra is doing in the bass management but the sub disappears in the room. The highs are clean and airy and that's what I was missing on the Arcam. The Anthem had a few issues that were annoying and its wasn't as dynamic as the Arcam. But the integra is and there so many pluses. The built in amp is great if setting up speakers as small 80hz plus. You can bi-amp the front left, right and center channel!! The fans keep the amp cool and never hear them. Movies sound a bit more cinematic. The web ui is well thought-out and great for setting up the unit.But you also have the onscreen display, cmon. I'm impressed. Thanks for convincing me.

[@whitecrowuk575]

Tbh - it’s all about Dirac calibration - no two calibrations are the same because of it’s complexity. You can totally make it sound crap and you can make it sound wonderful. I have av41 and experienced both. But nevertheless Integra/Onkyo are great AVRs and absolutely best bang for buck. Shame Integra doesn’t sell in UK as I would try - this extra xlr ports would make me do it over Onkyo. Now I’m waiting what will support Dirac Art and then make a jump - if Onkyo does it I will certainly give them a look.

[@TrueStereo-]

How does it sound compared to other pre-pros? I can’t wait for the listening test video.😊

[@DavidSusiloUnscripted]

Just FYI, the pre-pro mode actually started by Pioneer Elite about 10-12 years ago, they simply never use it as a selling point.

[@Audioholics]

@DavidSusiloUnscripted Yamaha RX-Z7 had it too back in 2009. But, now it's all the rage after I convinced Marantz and Denon to add it 😉

[@robertb5076]

@@Audioholics Pioneer also had web interface way back in 2010, my now ancient (but still working) SC-37 has it.

[@donwojtanowski140]

When can we expect to see your listening review?

[@jacquesjoye1898]

well how do I get to the screen with all menu? Login in I can see only two black screen: one for parameters with Device information and one with network setting. I can access to all menu shown on this video.

[@timkramer3255]

Jacques, I found this in Reddit. Instead of admin/admin -- sign in to the IP address as ciuser / ciuser ..... Tim

[@billmaulka4158]

Danny's back! See what he says about the Cornwall

[@panosopc]

Did you know what force means in earc in limit mode in web setup

[@Eki274]

Dzięki Tobie zdecydowałem się i dziś zapłaciłem za Onkyo rz70 w Niemczech 2500euro.U nas w Polsce to tylko ceny dla bogaczy 3700 dolarów za Onkyo rz70.Naprawdę zarabiamy po 5dolarów na godzinę a za Onkyo rz70 płacimy prawie 2razy tyle co w Ameryce.Fajnie macie😂😂😂

[@whitecrowuk575]

I jak wrażenia?

[@Eki274]

@whitecrowuk575 ja ci powiem kalibracja robi swoje.Jest super oczywiście potrzebny Unik 1.dzięki temu mogę poczuć game chenger.Szkoda że nie mogę skalibrować tak Onkyo rz1100 srebrny :)

[@mp792]

@@Eki274 😆😅😁🥲🥲🥲🥲

[@GizmoDuck34]

Would I be able to use this to set my speaker set up? Due to my room set up I have to have speakers just go up the wall, over my head, and down the back wall. I don’t have side surrounds. So how would I configure that It would be 2 front towers, few feet about that on wall are two in wall speakers Then 4 ceiling speakers And then 2 in wall speakers behind me

[@lbpiercy]

Gene, do you have a link ti the video that talks about digital filters as noted in this video. I am having trouble finding it.

[@robiform7296]

Hi, one question if you know, why display show me sound configuration and not what source I have and volume level? Thx for reply.

[@tulio3571]

Hi there could i add a grafhic equalizer for the front channels for music? thank you

[@MikeMargolis-j8f]

Can someone tell me if the Onkyos behave the same way as other AVRs, such as the Denons, when it comes to sound modes and the way they behave with certain codecs? I just set up a Denon x2800 as a former diehard Onkyo fan, and I can't get my head around the way I have to switch sound modes via the remote with every disc I play (if I watch a disc that doesn't make the Denon drop back to the last mode used). I can't stand how you have to switch to a different correct mode for every new piece of content; but is this just the way the new AVRs work now because of the Dolby Surround and DTS Neural upmixers? I'm used to my old Onkyo 605 using Pro Logic II for two channel signals while auto switching for all appropriate surround modes....do the new Onkyos behave this way via the remote as well?

[@kashima3626]

Hi , I purchased the rz70 and ran into a weird situation . My front speakers are focal 1028be sub is REL t7x and center plus surround are Martin Logan. Out of the box the stereo mode sounds terrible on the fronts ( very thin , trebley and completely lacking of the front base … after dirac room correction it’s much better but still not great. Today I tried the other modes and was shocked how great the “ pure sound “ mode sounds like! Suddenly the front speakers are well balanced and have insane base without the sub .. I am puzzled- any idea why stereo mode sounds so bad ??

[@MikeMargolis-j8f]

With regard to Speaker Virtualizer - does this affect the Dolby Surround upmixer when both are engaged in a 5.1 system and you play a non-Atmos track? I only have a 5.1 setup with surround speakers in the ceiling above us, but I don't want the upmixers to mess with the normal 5.1 tracks on discs, yet from what I'm told, the upmixers don't engage - even though they light up on the front of the AVR - when it's a 5.1 system, because there's really nothing to "upmix" to. Does the Virtualizer affect this in any way?

[@Gustavo-en3uv]

Do you recommend upgrade my Onkyo tx-rz1100 for rz70, my 1st priority is sound quality no extra chanels needed, I already have a OSD amplifier that let me run 7.2.4. Thanks

[@Eki274]

Hello, I have the same dilemma, rz1100 vs rz70. I test both at home, rz70 is better mainly because of calibration. What do you think?

[@viceman9601]

Gene, Great review and demo. I had one quick question: Do you know of a site that has all of the previous firmware files for the RZ70? I am reluctant in doing any updates without having a previous firmware file. Thank You

[@JC_Onofre]

For an RZ50 an old amplifier would be a good match? Just saw the HTD you just reviewed on sale.

[@paulreading8980]

The TX-RZ70 is now half the price of the Marantz Cinema 30, it the Marantz twice as good?

[@MikeMargolis-j8f]

Gene, Could you touch on something for me when you have a second? I used to be a diehard Onkyo fan, but lost interest in their AVRs when they made two changes: dropping the "IntelliVolume" input leveling system, and removing the front display's ability to show both the source name and sound mode at the same time. I ended up going with a Denon x2800 because of this to replace our old Onk TX-SR605. I was aware of the "My Input Volume" feature on newer Onkyos, and I thought this was meant to replace IntelliVolume - but I was under the impression that this didn't work the same way as IntelliVolume, instead being used as a way to set individual sources' starting volume. Does My Input Volume actually work like other input level adjustment systems, where you can "boost" or "cut" the input trim, like a power amp's input level control?

[@wesf1430]

I tried using that on a Sony STRAN 1000 it won’t let me send it to the receiver. Maybe can you do a video on that?

[@bobrocco1203]

Does the Onkyo rz50 have online also?

[@Audioholics]

yes

[@bobrocco1203]

@@Audioholics thank you

[@marconista5390]

Hello sir Gene, i want this avr rz70 but I'm always thinking/worried about the hdmi board issue/problem of onkyo's avr in the past. I want avr to last at least 10 years or more is better. Any opinion for this rz70? Thank you.

[@Audioholics]

@marconista5390 based on how this thing is designed, I'm pretty confident it will be a lasting one.

[@marconista5390]

​@@Audioholicsthank you sir gene, I'll get this rz70 soon.

[@808lublabs4]

Gene...about that preamp mode. I'm looking for it in the manual and can't find it. I was wondering if selecting front only turns off the front L/R or is it L/C/R? Would be nice if you could do L/C/R for people that want equal power across the front 3 channels. Otherwise you're stuck with only having a 2 ch for front L/R or needing to externally amplify all your channels if you turn the preouts off. Its probably splitting hairs on whether you'll hear a difference if you leave the preamps all on or turn off the ones needed by still would be nice to have individual control.

[@Audioholics]

@@808lublabs4 I show how to find preamp mode in the video. You can apply it to the front LR channels or ALL channels.

[@patrickcoonan143]

Is there a way to just use the internal amps for only the height channels? I have a 7 channel external amp and only need the internals for the .4. This is a deal breaker if not. If preamp mode is set to 2 channel, does that disable every other pre out?

[@troybrownentertainment2324]

@@patrickcoonan143 Yes you can use it that way

[@Jacobskate]

It would be great if pioneer or onkyo made a processor like the anthem AVM70.

[@BrandonAttarDbran]

Hey Audioholics, i am trying to access this receiver through the web ip but i am only getting a screen to Device Information, Control4, Firmware Update and to adjust some Network settings :/ i am not getting the same screen/Menu as you. can you please help me out what am i doing wrong :/ ?

[@kshred3043]

Comparing the Onkyo TX-RZ70 with Yamaha A6A/A8A, the Yamaha has "Surround AI" which seems to override standard Atmos processing when enabled. Assuming my understanding is correct, does the Onkyo have anything equivalent to "Surround AI" and, if not, is it losing anything as a result. Sorry if this is a dumb question but I am overwhelmed by all the processing options and marketing gobbledegook in modern surround sound processors, This video is extremely helpful BTW. Thanks.

[@morozovkirill]

nope ! surround AI works with atmos metadata ! even on mine old yammy 3080 ^)

[@haftarun8]

Does this work on the TX-RZ50 as well?

[@Audioholics]

@@haftarun8 yes

[@tommyaustin4094]

Gene, an RZ50 with all channels driven externally, would that give me an experience that rivals the RZ70?

[@hoopdyhop76]

Have both, running external amplification in both cases. I would say it depends on how much control you need over your subwoofers. Do you need separate sub outs? Do you want Dirac Live Bass control? If the answer is yes to those two questions then get the 70, if not you may be better off with the 50, depending on the amps you use externally.

[@tommyaustin4094]

I feel pretty good about how my subs are calibrated with minidsp and can manually adjust if needed. Appreciate the input very much.

[@donwojtanowski140]

I had the rz50 with all channels driven. I still got the rz70 a week ago. Has better dacs and internals.

[@maheeinfy13]

Can this process 13.2 channels on the preamp outs

[@Eki274]

No 11.2 & plus stereo reciever 2Zone.Pionnier &Integra 11.4 plus 2x st. Reciever Zone2& Zone3.

[@jebbj19]

No exit button?

[@JewelFamily-zf1sm]

I guess I'm in the minority as I like having zones on my Denon. I have zone 2 setup and stream music using HEOS. Planning to add zone 3 soon as well.

[@TheNLHAZE]

VERY IMPORTANT INFORMATION! IF I have a amplifier hooked up to my three fronts let's say two fronts are SVS Towers Tower speakers that can handle 200 Watts how can I get 200 Watts to those speakers when the Onkyo only puts out 140 per Channel 2-channel driven thanks.PLEASE HELP !!!!!

[@Audioholics]

You don't need to match power ratings of a speaker with output power of your amplifier. The Onkyo will deliver 170 watts/ch 2CH driven at 8 ohms and close to 300 watts @ 4ohms which the SVS towers are. You've got plenty of power to drive them well.

[@TheNLHAZE]

@@Audioholics Yes sir but the TXRZ50 doesn't have the correct amount of voltage our power if you will in the pre-out department. I love Onkyo always have however my testing on the pre-outs are not up to the correct voltage for proper amplification.

[@kodisathya8192]

Type IP address and press enter?

[@panosopc]

Or if you know a place that has all web setup info

[@BryanCurtis2014]

140 watts per channel into 8 ohms (20-20,000 Hz) at 0.08% THD, with 2 channels driven

[@Cringing_Cranium]

Are all Onkyo receivers requiring to accept their EULA when it is connected to the network? My Onkyo is demanding I allow them to collect my usage of the Unit i have owned for 6 years. All of a sudden they pushed an update that pops up a screen at every start up. If I select no I do not agree, it lets me in. BUT then it comes back over and over demanding that I agree. NO damnit. I own this receiver you can't have control of my usage data. What bunch of a-holes.

[@jabuki2]

This "secret" login is so useful it's shocking that it simply doesn't come up when searching for onkyo web interface. The default web interface is laughably useless.

[@mauriciob8260]

on Amazon today is just 1,999 us dollars brand new 😍

[@Audioholics]

@mauriciob8260 Our channel partner Audio Advice has the same sale, offers great customer support, and you support our channel by buying through them using our links.

[@CPng1N]

So now your AV receiver has been added to the list of COMPLETELY INSECURE DEVICES on your personal network. You go.

[@808lublabs4]

🙄 I have a 20 year old AVR that's connected to the internet so you're kinda late for that argument. Do you only pay with cash and live off grid as well?

[@roadfordays]

AV receivers have been networked for like a decade now. And routers have had LAN web interfaces for multiple decades, still only protected by simple default text passwords to this day. Nothing is ever completely safe, but I don't see how this is any less safe than literally any other networked device of any kind.

[@Audioholics]

I've never had a security issue on my home network adding audio gear using default passwords but feel free to change them in your system if that's a concern.

[@DavidCNavas]

I wish vlan configuration was easier, and getting streaming to work across vlans with proper cross-vlan multicast wasn't a pain. I've got all my media devices on a separate vlan, but getting chromecast across vlans is something of a pita.

[@roadfordays]

@DavidCNavas DLNA streaming works great. I use minimserver on a laptop and it seems to be rock solid. My old RZ630 could never access all the folders over DLNA servers, but the RZ70 seems to work fine. Never need to leave the Onkyo app or turn on the screen to access and play anything. The Onkyo app can handle Atmos in Amazon Music, now, too. I actually have repurposed my theater's Wiim streamer to the whole-house speakers, because the built-in stuff on the RZ70 works just as well.

[@paddle_shift]

OMG! "I don't know why you would change your password". I know this video is 5 months old and I'm sure i am not the only one terrified by what you said. But PLEASE PLEASE PLEASE change your password. Especially if you care about your personal data.

[@Eki274]

Has anyone who owns Onkyo Rz70 compared it with Onkyo rz3100 rz3400 class D??? I don't know if the change in my case will be a big plus, I only have 5.2.2. Generally, I'm talking about Xbox SX and Ps5.

[@abdelzidan8189]

I’m just getting tired see people get ripped off, paying too much money for junk in two years or less you be looking for Repair even onkyo they ignore you because you got your money. Send your finger in the mail.

[@abdelzidan8189]

Is only$2300 you guys, funny how much you get pay for advertisement for onkyo Stop bullshitting people

[@Audioholics]

@abdelzidan8189 Onkyo has never paid us a dime. This review is costing me money, so stop bullshitting yourself.

[@Audionut74]

If you're going to troll a channel to get your 2 seconds of fame, at least do some basic research first 🤔 before you say something that isn't accurate or really doesn't contribute anything informative to the conversation. If you are so triggered on the price of this product, then buy something that's more in your budget. Wow, what a concept 👏 unless you do it to just crave attention from anyone?

[@abdelzidan8189]

@@Audionut74 oh yeah stop screwing people onkyo junk. Everybody knows that. The worst products you can buy. People pay a lot of money in two years, have to look for Repair look in history onkyo after they star making home theater receivers look on KZbin people used to use hairdryer warm up the chip to get it back to work shut up

[@abdelzidan8189]

@@Audioholics oh yeah, get real job. You sit in your ass on microphone all fucking day.