TIMING COVER REMOVAL AND OIL LEAK FIX ON MAZDA 2.3 MAZDA CX-7 CX7 MAZDASPEED 3 MAZDASPEED 6

TIMING COVER REMOVAL AND OIL LEAK FIX ON MAZDA 2.3 MAZDA CX-7 CX7 MAZDASPEED 3 MAZDASPEED 6
In this video we will explain how to remove or replace the timing cover on Mazda with 2.3 Turbo Engine. You may be leaking engine oil from the valve cover and that is why you may need to remove it or you will need to remove the valve cover every time you work on the timing chain, cylinder head removal, cylinder head replacement and more. We explained how to remove and replace the timing cover on Mazda CX-7 but it should work on MazdaSpeed 3 and Mazda speed 6 with the 2.3 turbo disi engine since they all share the same engine.
This video may be helpful on:
Mazdaspeed 3 2.3 Timing Cover Replacement Removal. Oil Leak Fix
Mazdaspeed 6 2.3 Timing Cover Replacement Removal. Oil Leak Fix
Mazda CX-7 CX7 2.3 Timing Cover Replacement Removal. Oil Leak Fix
► Timing Chain Kit: amzn.to/2PMNEwd
► Timing Tool: amzn.to/2Mkt3NH
► Engine Sealant: amzn.to/2oKQOpp
► Front Crankshaft Seal: amzn.to/34MyVWg
► Screwdriver Set: amzn.to/34a6r9X
► Clip / Panel Removal Tool: amzn.to/2ZIa03I
► Tool Set: amzn.to/2n2dnpb
► Torx Socket Set: amzn.to/2oBNBZ0
► Reverse Torx Socket Set: amzn.to/2oEEYwQ
► Makita Impact: amzn.to/300c4Jt
► Dewalt Air Compressor: amzn.to/2nVApOq
► Impact Wrench: amzn.to/2nVAOjU
► Check out our Amazon Store for the tools and parts that we use: www.amazon.com/shop/worldmech...
► Our Website: mechaniclifestyle.com
► Our Baby Girl Channel: goo.gl/WiVs8Y
► Our Second Car Channel: goo.gl/XB6fHq
► Honest Product Review Channel: goo.gl/sMPQXk
► GoFundMe Link: goo.gl/pUife3
Our Most Popular Videos:
► Bumper Repair: goo.gl/XBe4Sh
► Missing Wheel Lock: goo.gl/5n4a5i
► Bearing Replacement: goo.gl/JSNDnZ
► Restore Headlights: goo.gl/qVhDkf
♦♦♦ Cameras & Gear Used For This Video ♦♦♦
•Cameras
Panasonic Lumix FZ300: amzn.to/2BNWtNA
•Tripod
Polaroid 72-inch: amzn.to/2iVTmP4
•Microphone
Polaroid Pro Video Condenser: amzn.to/2krpSsA
•Light
NEEWER 160 LED CN-160 Dimmable: amzn.to/2jjg9Bd
•Comuter for editting
Lenovo ideapad 310: amzn.to/2kqUNFl
♦♦♦ Other Equipment and Gear that I use ♦♦♦
•Camera
Sony HD Video Recording HDRCX405: amzn.to/2jk8nqB
•GoPro HERO5 Black: amzn.to/2ktNKfj
•Extra Computer For Editting
Lenovo Ideapad 510: amzn.to/2ktOuB7
► Like Us on FACEBOOK: / worldmechanicsofficial...
► LIKE & SUBSCRIBE for MORE DIY VIDEOS that could SAVE YOU BIG $$$$$$$ !!!
This is not a sponsored video. Everything is purchased by us!
The video is meant for entertainment purposes only. Do not Attempt!
AMAZON ASSOCIATES DISCLOSURE
Auto Repair Guys is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com
*Disclaimer
We, Auto Repair Guys, are not responsible for property damage or injury incurred as a result of any of the information contained in this video. Information given in this video does not guarantee the desired outcome. Any injury, damage or loss that may result from improper use of the tools, equipment, or the information contained in this video is the sole responsibility of the user and not Auto Repair Guys.

[@AutoRepairGuys]

⛐ Check out our Garage to see what tools we use and recommend: www.amazon.com/shop/worldmechanics ⛐ Subscribe and hit the notification bell by the subscribe button for new videos: kzbin.info ⛐ Our GoFundme Page: www.gofundme.com/auto-repair-guys

[@5haun1]

Thanks for the video guys! One thing I would add-- the water pump pulley needs to come off. It's a lot easier to do this before you remove serpentine belt. There's a single 8mm bolt on the timing cover that can't come out when the pulley is installed.

[@Capuchas1]

You guys are amazing thanks!

[@shanesouthwood8413]

Thanks!

[@thegamermechanic2970]

Great video! Im working on a cx7! Its a flip! The bolt that you said you dont have to remove at 27:30 whats it called? Its missing in mine and oil is coming out of it!

[@uasitangi3723]

awesome video you two and great team work everything flows so well between the two of yous good job both of yous

[@Keepin-it-wheel101]

Can you remove the timing cover without removing the top camshaft cover? My cover is leaking and I just want to remove and resealed. Mazda 2.3L m3

[@henleyshere6344]

What did u do about the friction washer when putting back together

[@1randybobandy]

Hey do you have the link to the video when you put it back together? Thanks

[@ryulee458]

Can you do a video on transmission changing oil filter with gasket

[@sprmwales27]

I suspected a timing cover leak on my car at only 65k miles.. i have 110k miles now and it idles rough so im thinking of changing it now

[@GodsTeeth]

Thanks for the vid! How long was this work?

[@210ElderScreamo]

Aaron Divelbliss this is a job that pays a Mazda technician 4.5 hours

[@lancebarrier8290]

Do you have a video for replacing the the tensioner? And do you have to remove all of this to replace the tensioner?

[@scrwUhippy]

I'm currently changing the tensioner in mine. Finding there is so much to remove. Bloody pain in the arse to do

[@amylou583]

If doing this in situ the power steering pump has to be removed to access one timing cover 8mm bolt .

[@ramonmares1974]

Hey guys. So I have a question. That bolt you described where you add the purple bolt for top dead center. Ok well awhile back I noticed my car was leaking from that bolt so I added some in weld. I didn’t know what it was for so I added the weld to keep it from leaking. Now my timing cover broke so I’m having to do all your steps to fix it. I had remove the whole engine so I can fix everything that was damaged. I see there’s no bolt and I covered that spot with weld. I take weld Off there’s no bolt. I think it broke awhile back. Now it’s just a hole filled with weld. What do I do

[@ramonmares1974]

I can’t even send picture

[@muyiwa5865]

My mazda 5 valve just got damaged due to wrong timming.... my mechanic replaced the crankshaft pull without minding the timming

[@icontacked]

What's crazy is you could do this same job on a Honda or toyota in about 1 hour lol... Stupid design by Mazda

[@i_n_93]

why you put a tie in your hand🙁☹️