Battle of the 18 Volt Cordless Fans , Which Will Reign Supreme !!

[@dollarbillme]

Got the Milwaukee in my truck right now with a 9.0. I get 1 hour per an amp hour on high. Love this fan.

[@yenkodavi3573]

Im looking to use one of these to build a swamp cooler, which one will last 9 hours straight on full blast??? tnx!!

[@ForFucksSake57591]

Solid comment. That’s exactly what I wanted to know @dollarbillme

[@mattwaters6987]

It’s been approximately 8 months since I watched this review and I decided to go with the Dewalt 511 fan. It was sale priced at $109.99 CAN. Glad I did too. Again, great review. Great fan!

[@ryanjacob8568]

I have the Ridgid, Ryobi and Milwaukee fans. I can tell you the Ridgid will run 7 hours on a 4.0 ah battery on high and about 3 hours 20 minutes on a 2.0 ah battery. You’re definitely right about the amount of air flow coming from the Milwaukee. It feels stronger to me. I have the Ryobi and use it the most because it sits next to my bed and I run it at night because of the noise. Unfortunately I think a bearing is going out because when you turn it on it makes a loud noise that can be stopped by banging on top of the fan a couple of times. Going to have to do a warranty exchange on that one. As far as run time, I can get 6 hours on high with a 4.0 ah battery and 17 hours on low. The Milwaukee seems to be the loudest of all the fans. I’ve been able to get about 4 hours of runtime with 5.0 ah battery. One other quirk I learned about the Milwaukee is it actually has more power with the battery rather than using the power brick.

[@petyweestraw]

For the record I'm getting just over 9 hours noon high with my kobalt with a 4 ah battery

[@weldonpinder7295]

I love the milwaukee above all. 1 because the adapter is compact, it can plug in a small extension cord and comes with the fan. With the other fans you have to carry a bulky extension cord with them. 2 it blows more than enough air even though the others last longer with a 5 amp battery. I can always put another battery in no prob

[@luashelton9320]

Thanks for this video. I use the Milwaukee fan positioned in the floor of my dump truck, which has zero room for any hanging options . It doesn't overturn, and the plastic is of great quality. If I were in long haul tractor trailer work I'd also be looking at that Dewalt. For dump truck dirt hauls that trash the fan with dust this Milwaukee an be cleaned easily with a swiffer duster. It has survived the extreme bumpity-bumps of offroad dump trucking , as well as being stored in a hot car (minus the battery, of course).Thanks for showing the Dewalt. Never seen it until this video

[@toolboss8410]

Yea in reality like I say power wise they pretty much all the same ..just some features that make them different...yea if Milwaukee just fits ..the Dewalt will not ..much bigger then the Milwaukee

[@thethinblueline2444]

I own the Dewalt,Milwaukee and the Ryobi. I run all 3 of them all the time. Love the Dewalt, but then I'm usually biased toward Dewalt. The Milwaukee puts out great air but hate that AC plug in! The Ryobi for the money is a great fan. I beat the hell out of it (because it's a Ryobi) but it never hiccups a bit. My opinion on these fans if you are looking to buy one is to stick with the brand you have already invested so much in. Just my 2 cents worth. Great video Boss man!

[@toolboss8410]

Yup .just about nailed it ..like I said in video don't let specs fool you ..the Milwaukee at 284 cfm and Ridgid at 475 must of been tested differently cause Milwaukee throws more air ..but alot louder , doesn't rotate as much , no mounting options , ac adapter and biggest thing 20% more expensive

[@thethinblueline2444]

Yup, you are definitely right about specs. They seem to be off quite often. Haven't chatted with you in quite some time. How you been brother!?

[@chiefsthunder7579]

I went ahead and stuck with Dewalt when looking for a fan and thankfully Dewalt has put out this great model. It's more expensive which is a kick in the nads but it could have been worse.. Dewalt could have had the worst fan out and all Dewalt customers would be stuck with it because we have Dewalt batteries and tools. So yeah not bad in the end. My wife oddly enough loves the fan haha.

[@dragan3290]

I got the dewalt recently but no AC version. It goes forever on a 5 AH battery. I use it in summer here in Australia at night on low. Just to keep cool. Cheers

[@meagaindave2049]

I like the Ryobi. Not just just for cost effectiveness, but for it's compact size in tight places. 😁

[@toolboss8410]

All have there pros 🤟

[@meagaindave2049]

@@toolboss8410 you didn't open a bottle of beer with ANY of them! 🤣🤣

[@tms022tube]

FYI, The Ryobi has grooves in the base that allow you to hang it from your garage door rails. Super helpful when working in the garage during the summer. I take the Ryobi to the dog park during the summer to keep cool and keep the bugs at bay. Super light weight. Love it!

[@John-771]

I have 2 of the Dewalt 511 fans, one for work one for home. They are awesome.

[@loktom4068]

Power outage in a very hot day, my Ryobi save the day and night. Got a good sleep.

[@kimnimbus1291]

TB， great review and video. Thank you for taking the time to make this video for us 👍👍👍🙏🙏🙏❤️

[@toolboss8410]

🙏🙏❤️❤️😉🙏👍

[@nuclearknight8543]

I have 3 of the ryobi fans one on my bed side two in the garage I like them loud it helps me sleep when I’m home. I’m used to livening on a tug boat so the noise is no problem for me.

[@Therealphantomzero]

I have the Milwaukee but if they come out with higher cfm i will be in heaven. It's a life saver when I'm feeling over heated at work. Great to take to the bathroom too

[@chrisjones6165]

Yuck. Recycled porta shitter stench

[@jimpann]

Common sense says invest into Ridgid, brand loyalty only cost you money. Thanks for the vid TB, awesome as always.

[@dirtroads3806]

Ive got the ryobi and love it. We lost power last night and I had it on high with air on my face. Slept like a baby. I also have tinnitus so the noise helps me sleep

[@toolboss8410]

👍👍👍🤟👊💪

[@mattmichaels5195]

You did a really good review on these. Much better than others. Thank you.

[@chrisjones6165]

Had original walk off recently. Got a new one today. No idea on cost since company sent out. I was just glad to have it. Keeps air moving and weld smoke out of face so dble thumbs up there

[@johnrice9121]

Love the comparison review. Very nice info. I am very happy with my Ridgid at $49. Thanks Boss

[@toolboss8410]

Thanks John 🤘🤘👍😉

[@JVBL1]

The 2x4 mounting sold me on the DeWalt. Milwaukee definitely needs to upgrade their fan.

[@johnhartz21779]

FYI on 4Ah I get about 8 hours on high with the Dewalt. For anyone wondering about time on high.

[@niceguy6837]

An it will blow half as much air for twice as long

[@82camino96]

Awesome boss. I have the rigid and the Dewalt. Love them both, the Dewalt is a little nicer quality and a better footprint but I actually prefer that the rigid can go down to a VERY low speed, maybe even less than half of Dewalt slowest setting. Sometimes I like to have it just lightly circulating some air which is almost silent... by the way I’m on my way home with the 40v mower, about to try it out. Thanks again TB.

[@toolboss8410]

Yes very true ..like I showed in vid the Ridgid can go crazy low ..at it's lowest doesn't do much of anything ..but yea probably does have widest range 😉

[@patrickleyland1110]

I missed the Ryobi for $19.00 over the July 4th holiday at Direct Tools. The resellers gobble up the deals fast.

[@Rammer_Jammer]

😎 Dewalt For The WIN Love Mine Down Here in the Southern Heat 👍👍🤙🤙🤙👊👊

[@toolboss8410]

👍👍👍🥶🥶🥶🥶🥶

[@Joshuaellis420]

Bama fan Rtr I’m a Milwaukee fan guy I have 2 I’ve taken them to the quad many times I’m just glad they are trying to one up eachother

[@chrisjones6165]

I'm still rocking my Milwaukee daily sure came in handy last week being over a 100

[@toolboss8410]

Yes they are great ,versitle fans .help in alot of different ways

[@marcovelasquez290]

I have the Milwaukee and dewalt fan, and the Milwaukee blows way more air then the dewalt. But at least I got the dewalt for $100 with battery and charger!

[@webpro607]

where you found dewalt fan for 100$? the minimum i can find is 150$ and with only 1.5A battery

[@marcovelasquez290]

Web Pro I got at Home Depot it 99 but with tax it’s $110, check Home Depot online I see it it’s still for 99 1.5 battery and charger

[@sanuske]

Dewalt at $129 currently at my location im not going to cave in

[@jarrodbrennan121]

I have the gen4 ridgid fan. Its nice. I use the hooks and a rope to hook it to the hand rail of boom lifts to get some airflow on my back. Its hot in houston on jobsites. I got mine at a pawnshop for $35. 4 ah batt will last most of the day on high if you turn it off when you dont use it. The 6ah and 9 ah last all day no problem. I normally use a 4 ah in the fan.

[@toolboss8410]

👌👌🤘🤘😉👍

[@Federer2001]

Oh yeah this is what ive been wanting to see! great video once again Boss man. =)

[@toolboss8410]

Thanks buddy 👍😁🙏🙏👊👊

[@bradstemp1567]

I got my ridgid a few months ago when they first went down to 49 bucks. It’s an awesome fan think I’m going to pick up a few more to have around the house for hurricane season.

[@toolboss8410]

👍👍👍👍😉

[@toyo2502]

What's hurting Ryobi is they are now pricing their 18v tools very close to industry standard tool prices forcing you to buy the industry standard tool.

[@toolboss8410]

Yea ..I like my slogan .. Milwaukee tools at Ryobi prices . At some point all go on sale ..end up being just about same price as Ryobi on certain tools ...and close to Ridgid on others

[@bigrobbyd.6805]

I own both the Ridgid and the Milwaukee. They each have their uses. I actually use the Ridgid a bit more than the Milwaukee at home, but the red one is the one I take traveling. If they could put the Ridgid fan speed dial on the Milwaukee, and put a beefier cord on it, Big Red would be the best by far, IMHO. EDIT: Yeah, I forgot to mention the red one needs rafter hooks. Can't really hang it anywhere as it is.

[@hudsonroadsidesupport1593]

Milwaukee 👍 and I love fan noises anyways

[@pointedspider]

I like a fan that makes noise. That Milwaukee is blowing some air

[@deezyperformance]

Basically everything I have is Milwaukee, but I had to grab that Dewalt fan. Time for a Fuel fan with some rafter hooks.

[@toolboss8410]

👍👍👍👊👊

[@MT-vw6pf]

...5 years later😂

[@Dale37]

Went in with my mind set on the DeWalt but I ended up getting two of the Milwaukee fans for just a little bit more money then one of the DeWalts.

[@BenJamin-ou7kd]

Very impressed with my dewalt , smooth, quite, long run time and more air than my ryobi

[@toolboss8410]

🤘🤘🤘👍👊

[@miketaylor7198]

I have two Milwaukee fans and love them

[@toolboss8410]

👊👊👍🤘

[@BrianHallmond]

Thanks for this. I'm gonna be sleeping my car all day during summer, so need something that can go at least 8 hours hard. Open to any tips or suggestions.

[@weldonpinder7295]

I just got my dewalt today and from watching videos like this I really expected more, im so upset. Right now they're 129$ at home depot and by the time it gets here in my country it cost nearly double. Every video praises dewalt for how much air it puts out. But it doesn't put out more air than the milwaukee on high for sure. I know you guys might say I have a faulty fan but I doubt it I compared them both on high and milwaukee wins for sure. The dewalt puts out pretty much as much as the milwaukee puts out on speed two maybe a little more.

[@joeaught2186]

you do not have a faulty fan i am sending my over priced fake 500 cfm dewalt back.

[@niceguy6837]

Ya on paper the dewalt is better but in real life the Milwaukee gives u the best air when u need it, it pushes the air farther making it more affective, u cant always be right up on it, especially if your working

[@weldonpinder7295]

@@niceguy6837 I know but I've had a few people argue and tell me otherwise

[@niceguy6837]

@@weldonpinder7295 im a dewalt guy but im buying the Milwaukee fan, its that much better

[@AntonioClaudioMichael]

The Milwaukee seems to blow more air on 3 then the rigid

[@toolboss8410]

👍👍👊🤘

[@ciudad809]

It does i own the ridgid and the milwaukee the milwaukee blow more air in mid then the ridgid on high

[@Greenbearls]

I just like being able to take off a battery from another tool and putting into the fan.

[@hypertube81]

Undoubtedly, Milwaukee, for the win!

[@duncdunc76]

Well dang it I'm going to have to go out and buy that dewalt fan now that I've watched your vid Boss! Ive been him hawing around about buying one and since I'm in the Dewalt platform I'm glad the Dewalt is a good option in your opinion. I finally jumped off the fence after this last weeks heat wave and wishing I had a portable fan to set by me when I'm building outdoor playsets and gazebos, because I'm baking in the sun with no air flow. Your vid gave me that little extra feel good about spending the money😉

[@toolboss8410]

Yes now's definitely the time ..like I said for the Xtra $20 you can get a battery and a charger also ..👍😉

[@niceguy6837]

Wrong the dewalt fan is not good

[@duncdunc76]

@@niceguy6837 Huh, whats not good about it? It works for me just fine.

[@niceguy6837]

@@duncdunc76 its ok, it depends on what your using it for i guess, i work on construction sites in buildings with no ac in over 100 degree weather, im a dewalt guy , all my tool are dewalt but the Milwaukee fansblows much harder and farther so im buying it

[@aaronrepper7649]

Got the Milwaukee its good, would like a bigger one!

[@toolboss8410]

Hopefully we see a updated one soon .a cannon too 👍

[@chrisjones6165]

@@toolboss8410 I want a standing rotating fan

[@Mnymker07]

My Ridgid has been going strong for 4 years now. Can’t complain at the end of the day it’s a “work” fan.

[@toolboss8410]

👍👍👍😉👌🤘

[@jamessmith5535]

I was looking for a job site fan I was thinking of a 20 inch box fan and power in verter from Harbour freight hooked up to 12volt deep cycle battery. Im kind of hoping that Royobi will come out with a new fan with more speeds and stops for the height adjustments. My Home Depot only carries a few job site fans it dosent give me confidence when they say only 1or 2 in stock for the Royobi

[@Dabachaleor1]

I wonder if I have a defective DEWALT fan? 🤔 My Milwaukee blows a lot more air than my Dewalt on the high setting. I’m using 6ah battery in both ...

[@Fausto27F]

I just got mine yesterday I set it beside a Milwaukee fan and said the same thing.

[@MrWzeljunior]

Because the Milwaukee blows more air and faster air than the Dewalt. I compared them between my coworkers.

[@homescool3767]

on the Milwaukee what battery size do I need for it to run 8 hours straight on high!!! please tnx!!

[@MrWzeljunior]

@@homescool3767 I get MAYBE 10 hours or just slightly more on the lowest setting with an 8Amp battery. So I'd suggest a 12Amp and u can PERHAPS get close to 8 hours. Cheers 🍻

[@jesseduke2296]

How would you rate them value wise if you have to purchase batteries and charger also. You have Milwaukee listed as last in your opinion but for me it would be number 1 because I already have Milwaukee tools and done need to buy any other components to use it.

[@toolboss8410]

Well the Dewalt with battery and charger is $99

[@willy_9361]

TOOL BOSS now is $75 for the kit

[@ajwaller74]

Just got the Dewalt fan for $80 only because I got a bunch of batteries for it. I get about a day and half at work with a 5AH battery on high all day. Putting all the electricians Milwaukee fans to shame.

[@DanielGomez-cf6vk]

I have the ridgid and ryobi versión love them and just bought the 18 inch air cannon from ryobi it is impressive

[@toolboss8410]

👍👍👍👍😉😉🤟👊💪

[@ReviewsandTech]

Nice review and comparison bro, you did a great job, thank you so much.

[@toolboss8410]

Thanks buddy .. much appreciated 👍🙏

[@peterkolovos3079]

It all depends what battery system you are invested in. Mine is Ridgid and I have no apologies about it. These are great power tools and I love them. What kept me away from DeWalt is how they switched to a battery that didn't work with their older tools. That to me is Bullshit and planned obsolescence.

[@ricardoa7812]

Have the Ryobi right now, although it's not bad for what I need it for but I hate that the switch is on the back. Might get Milwaukee or Dewalt.

[@toolboss8410]

👍👍👍😉

[@alvinnorris1977]

I love my dewalt. Think i get 8-10 hours runtime with a 6.0Ah. The hooks make a nice touch for hanging in the jobsite bathrooms too lol

[@dragan3290]

8 hours on dc 511 xe dewalt on 5 AH battery. Love it.

[@AntonioClaudioMichael]

Milwaukee fan was ment to use a 9ah max

[@jonathanmosley4687]

When is Ridgid coming out with an Octane fan that blows harder when you need it?

[@toolboss8410]

I'm sure they working on it as we speak 🤘

[@niceguy6837]

That would be the Milwaukee

[@jeremyruff7961]

Anxiously waiting on the Bauer one to come out.

[@toolboss8410]

🤣🤣🤣👍

[@Mexicanmike87]

Waiting on the Hercules one! I got a Hercules bundle basically for my birthday haha Circular saw, recip saw, hammer drill impact, two 5 AH batteries, Impact rated bits, drill bits, saw blades and and an 18 inch tool bag, freaking over the moon haha

[@jeremyruff7961]

@@Mexicanmike87 I did not know they had a fan coming out in that platform. Rumor has it they may be redesigning some of there stuff on the Herc lineup.

[@Mexicanmike87]

@@jeremyruff7961 yep that's what I heard too, and yes I heard there should be a fan coming out with the Hercules line, granted I have a huge 24 inch fan from HF too but I want something portable haha

[@puffyjag1669]

awesome review, just a video I was waiting for to drop since two weeks now, I'm running ridgid ,makita, and Milwaukee platforms....

[@toolboss8410]

Thanks buddy 👍👍👍

[@jmjaxson]

TOOL BOSS....something that you may want to mention is that the Ridgid Fan(s) come with a 'LIFETIME WARRANTY' when registered with Ridgid. I'm pretty sure you have 90 days to register for the 'lifetime warranty' after purchase. If the fan comes in a combo (?) which include a battery and charger, I believe the battery and charger are also 'lifetime warranted'. Ridgid 'combo tool sets' usually have a lifetime warranty for everything included with the set...tools, batteries, and charger. Most of their 'tool only items' also.

[@toolboss8410]

Nope .. no such thing thsts y i didn't say it ... Lifetime Service Agreement LSA .. NOT LW or Lifetime Warranty... Very different and there lsa is terrible ..

[@practicalguy973]

I like the ridgid and that it's really quiet but I dislike that the off switch is at high mode. So backwards to how typical variable switches are. I will think of this video the first time I try to crank it up and shut it off accidently.

[@toolboss8410]

Yes sir I mention that in video I think.🤘🤘👍👊

[@practicalguy973]

@@toolboss8410 You did and I'm glad you did. I hope with your channel size Ridgid knows about that. I mean what are these designers thinking when they backwards a switch like that. Its so obviously a user inconvenience.

[@stratfordmiller8742]

Where is this 100 combo deal?

[@evilsd9]

Great review I was looking at picking up the Dewalt kit they had at the Depot, they had a few left I was hoping they were going to put them on clearance at my store and get it for $80 with the 1.5 battery and charger. They sold them all at $99 though cause I live in the desert and fans are like gold this time of year. Haha I'll pick it up at tool only for $80 on Amazon now, though I was laughing you had the 12.0Ah battery in that thing. I don't even have a 9.0Ah flexvolt yet little lone the 12.0Ah, I couldn't justify putting a $200 battery in a $80 fan at least not yet, maybe someday when I have a lot more batteries. Lol

[@toolboss8410]

👊👊👊🤘👌

[@hunterharrell7491]

I have both the dewalt and the milwaukee, the milwaukee feels like it blows harder, but both work really well, Dewalt lies about being 20v so they could also be lying about their cfm output

[@stevezhang3646]

Love my Ryobi with 29 Canadian dollars Only

[@mdsd77]

Get two ryobis for the price of a Dewalt? can run a Ryobi fan with a battery adapter, that will use DeWalt or Milwaukee batteries... I just tripled my DeWalt battery arsenal from deals you posted! I am gonna get a yellow fan and see what it's about, sounds like awesome run times. If any manufacturer reading this we need a fan with an LED Light and 2 USB slots, maybe even a detachable light? That can be recharged when attached back to the fan and separately, So many people depend on these things during hurricane outages and other places, including camping. (And make the light brightness adjustable so it's just not an obnoxious white light, red, blue, green option would be great)

[@mdsd77]

I will add I have an adapter that will allow me use Milwaukee batteries on the Dewalt as well

[@toolboss8410]

🤟🤟👍

[@mdsd77]

Update: Bought the Dewalt on Amazon $79, it arrived today, have a 3ah on it to test run time, first I will say I really like the airflow even on low, it feels better than the ryobi fans, which I have so many of...rotation of the fan head is great, especially it rotates down as well, unlike the limey, the speed selector is great, and it is as solid as TB describes..., 6 of them limeys might be returned this weekend! (Plus I can't believe how quiet this thing is compared to the Ryobi fans)

[@toolboss8410]

@@mdsd77 👍👍👍🤣🤣🤣🤣 Chaka would love to see that comment

[@mdsd77]

Tested dewalt with a 3ah battery results on lowest speed, which is ample airflow but not the same speed as low on the Ryobi so , that would be just under the medium setting on the DeWalt, so the results on low with a 3ah 20v yellow top battery is just under 48 hours!!!!! Ran the test twice, same results, I am sold on these DeWalt fans, best airflow, has a wide range adjustable dial, and for comparison, I ran the ryobi on low with a 9ah battery for 37 hours which I thought was awesome, till this DeWalt came along... quiet as heck, it was just $79 at Lowes and Amazon, will stock up on these on black Friday and christmas if it drops that low again... If you have a Milwaukee to DeWalt battery adapter be forewarned depending on the one you have it may barely hit the battery slot preventing it from positioning into place, nothing a Dremel tool can't solve, either taking a little off the fan side or the adapter, I have contacted the adapter people to let them know the hump on both sides needs to be tweaked a tad.

[@chrisjones6165]

Sure hope new Milwaukee has a hang hook. Would be killer welding pipe or brazing copper up in rafters when it's over 100 degrees

[@toolboss8410]

I think they will kill it with there next one 👍

[@chrisjones6165]

@@toolboss8410 well if they need it demoed on jobsites I'd be more than happy to help out with it.

[@bradishler5967]

gotta get the kobalt and that new craftsman fan in there against these

[@KPE0339]

Dewalt hands down the best. Been using it during this hot weekend 😎

[@toolboss8410]

Yea have ours running also ..makes a huge difference 👍

[@KPE0339]

TOOL BOSS sure does boss!!

[@treydrier3169]

Have you actually tried the others to be making that statement? Because the Ridgid looks hands down by far best value for the money and very close in quality and capabilities. I would probably buy the Dewalt if they were $5 to $10 apart but not for almost twice the dough. I don't understand Dewalt's pricing.

[@josephmalinowski6817]

yeah the reason it's loud because it's blowing so much air into your microphone you can head out with the DeWalt or the others

[@jayjayhooksch1]

The Ryobi has been available for 29.99 Canadian since April. That's like 22 USD. I use mine daily and I'm thinking of picking up a second because of the price.

[@rtz549]

I want a fan around this size that runs off compressed air. For use in areas that either have no electric or explosive conditions.

[@toolboss8410]

👍👍👍🤘

[@Devast8r34]

Whats wrong with battery they run forever with even mid range batteries

[@rtz549]

Devast8r34 could be an issue with heavy paint or fuel fumes. Explosive atmosphere.

[@dylanandersen9318]

Ryobi has an 18" model out now. Might be worth checking out

[@toolboss8410]

That's not a compact fan . That's an air cannon . Totally different type of fan 🤘

[@stevescott1962]

First off I'd rather have the ac adapter, if I'm in my house or out on my porch, I can just plug it into my wall outlet, and/or also an extension cord, with the other fans, YOU HAVE TO HAVE AN EXTENSION CORD to run it without battery, u can't plug them into a wall outlet, sometimes u don't always have an extension cord on hand, but most of the time there's an outlet 😉

[@thorinbane]

Makita and its not on this list. I find it funny that many of these tool lists miss out on the largest name brand outside of the states.

[@SurvivalSpec]

gonna go get the Kobalt 24v fan this week, the price just went down to $69

[@toolboss8410]

🤘🤘🤘👍👍

[@gradyfleitas21]

Lowe’s has the Dewalt fan for $79 plus a free 3ah Cp battery and charger going to grab it in the morning.

[@Smokeshow767]

I have the Dewalt and Milwaukee. The Dewalt definitely blows harder than the Milwaukee. Both are good fans. Dewalt is quieter also and bigger

[@josegaucin6007]

Do you know if Milwaukee come out with a new designs fan?????? Any time soon????

[@toolboss8410]

Hope so.. it's very dated

[@josegaucin6007]

Hope so too bc I own the Milwaukee platform and don’t want to go to another brand. Thanks

[@maykelcj]

I have seen the Rigid fan puke the orange grill off. It is held by plastic clips and falls off easily.

[@toolboss8410]

Yea ..I noticed that also ..that's it's kind of clipped on ..ya get what ya pay for . 👍

[@kizzjd9578]

3 of these fans are made in the same factory

[@josephmalinowski6817]

u r true on that the Milwaukee styling is a little old but Home Depot has it for $69 that's not bad on a fan

[@toolboss8410]

Yes but get the Ridgid for $20 less or Dewalt for $10 more 👊🤟👍

[@weldonpinder7295]

So which fan do you think gives the most airflow? I'd like to know cause if dewalt does I'll purchase one of those

[@joaquinsuarez6090]

Dewalt.

[@weldonpinder7295]

@@joaquinsuarez6090 wow can't wait to see

[@weldonpinder7295]

@@joaquinsuarez6090 so sorry to tell you this but my dewalt fan arrived today and I was extremely dissatisfied. I have a milwaukee and I compared them. The dewalt on high only puts out what milwaukee puts out on speed 2. The cfm specs surely mislead me. What sucks to is that it cost 129$ at the home depot and by the time it reaches my country it's cost nearly double. I see people praise dewalt for their fan which it does have great features but not the air flow they claim. Milwaukee is like 275 cfm on the specs but that can't be. Milwaukee puts out alot of air. No wonder it's so loud.

[@joaquinsuarez6090]

@@weldonpinder7295 Sorry you don't like the Dewalt. It has been for about a week $99 at Lowes without battery or charger. It has about 500 cfm, it's water resistant, is nicer and has better materials than others. Maybe you got a defective one? Oh, well, you can sell it now that is still new and buy a different brand.

[@weldonpinder7295]

@@joaquinsuarez6090 it doesn't matter to me that it's dewalt. The dewalt has the best features but has terrible airflow. It's just I've been trying to get as much feedback as I can about the dewalt before I ordered it and everyone said it puts out a ton of air a like what I was looking for. Idk if it's the extension cord I'm using but I'm assuming using one shouldn't affect its power if anything it should improve it. I hope you understand where I'm coming from that in my country there's no home depot, no lowes. Pretty much nothing. My only way is to order and like I said by the time a tool gets here on the island the price for everything is nearly double so I doubt anyone will buy a fan for 230$. If you own the milwaukee and dewalt and can truthfully say the dewalt puts out more air on high than the milwaukee on high than I'll believe you

[@2chipped]

I have the original Makita non-oscilating, as well as the Milwaukee. I would like to have the Metabo with 14 inch metal cage and blade. , but don't have batteries.. Nor battery adapters like I do for Makita/Ridgid, Makita/Ryobi, and Milwaukee/Ryobi.

[@stevescott1962]

Youre looking at all the dumb features that don't make a fan a fan, what matters is how much dam air it blows not how quiet it is or weather its a shop plug or a.c. adapter, the milwaukee fan is hands down the best one regardless of price

[@josephmalinowski6817]

just picked up the Milwaukee M18 fan one of the big reasons all my tools on Milwaukee so I have the batteries for it live in Long Island New York I think it was around 108th today but most of the day outside change my AC compressor on my truck use the fan put it on the top of my motor set right on the plastic intake Dodge Hemi but I put the fan on top of the motor change my AC the fan save me we just delivered circulation of the year

[@toolboss8410]

👊👊🤟🤟👍

[@weldonpinder7295]

What I hate about the Ryobi is that on the low setting the air coming out is way too low they could've atleast just lowered it a little. The milwaukee has very low run time but gives great air. I hear everyone say on each video I watch how much run time these have on low. But what about high???? Can someone tell me please. Mainly the dewalt. I wanna know cause everyone says on low each one gives good air but for me they don't. I live in a country where the temperature can reach up to 100+ degrees plus so I need them on high

[@chuckdawg3214]

Great review. Thanks Boss. Have both Milwaukee and Dewalt.

[@toolboss8410]

👍👍😉😉 THANKS BROTHER 👍💪

[@whosnext2005]

Bossman what's the best deal you have ever seen on the ryobi fan? I'd like to get one and want an idea in what a good deal would be for it.

[@toolboss8410]

$39.99 is fair price ,wait till Ryobi days you prob get 2 3.0ah Batts and charger and fan for $79.00

[@Igor-q3f]

I'm using dewalt and milwaukee. Milwaukee is louder but feels more powerful.

[@mr.loversrock8690]

Hey man great review 👏🏽👏🏽👏🏽

[@toolboss8410]

Thanks for the kind words 🙏👍

[@rudyswoodwork7236]

I got the ryobi it works ok but I’m getting the deawalt

[@toolboss8410]

👍👍👍👌👊

[@ozielmaldonado79]

So using a flexvolt battery wont mess up the dewalt fan ??

[@jeffarnold1983]

The flexvolt battery is only 20v unless it's in a 60v tool. I'm sure everyone already knows 20v max and 60v max is actually 18v and 54v.

[@toolboss8410]

Why would a Flexvolt Battery mess up the fan ? Its a 20v battery ...18v like Jeff said 👍

[@EPSKRCMPK]

TOOL BOSS it’s uncommon knowledge but using 60v batteries in 20v tools can fry them

[@jeffarnold1983]

The flexvolt battery isn't a 60v battery unless it's plugged into a 60v tool. There is a mechanical switch that has to be pushed and two terminals that have to be jumped to switch the cells from parallel to series.

[@EPSKRCMPK]

Jeff A well the technology is flawed somewhere because they are literally smoking tools

[@AntonioClaudioMichael]

I agree the dewalt is great the rigid is nice also

[@toolboss8410]

🤘🤘👌👊👍

[@EyeSeeDeadPeople44]

Too many people purchase their tools based on name brand and not on performance!Im loyal to no brand,only to the actual tool.I definitely prefer the better tool any day of the week.

[@bris9984]

Milwaukee is a good size if you have a toolbox and work on ups and amazon you your own air and it blows air very well

[@JamesBond-nr2iz]

Thanks boss for the info

[@toolboss8410]

🤟🤟🤟👍👍😉

[@ExposedRoot]

It's cool to see how these fans stack up against each other but really it's kind of insignificant. They're all good They all work They all blow air They all cool you off. You're going to buy the fan depending on your tool investment ie your battery investment. Who the hell is going to look at the fans and then decide they want to invest hundreds or thousands of dollars in the batteries and tools based on that fan choice?

[@Roaring.On.Carnivore.]

Which of the four is easy to clean ? good job brother 👊

[@toolboss8410]

Thanks buddy...the DeWalt has pretty big openings ..I use a compressed air works great for my other fans

[@patrickleyland1110]

Great. I have been waiting for this.

[@toolboss8410]

🤘🤘🤘👍

[@illmagnetic]

Let me show some love to the Big Blue Kobalt fan. It has 600 CFM, both battery or wall powered and comes in at $69. Also if you place it near you while playing XBOX or Playstation like I do you will double your kills on Call of Duty. BAM!

[@toolboss8410]

🤣🤣🤣👍👍👍😉...yea if I had a bigger battery I would of included the kobalt . I have 4 1.5ah batteries

[@johnhartz21779]

🤣

[@qzetu]

What exactly are you people using these fans for? I certainly am not going to take them to a job site. I suppose they would be useful at home but I can buy a big nice fans for the same price. I need to understand? Help me?

[@toolboss8410]

Can be used at jobsite ..can be used by any trade plumbers ,electrician ,HVAC painter's etc gets hot everywhere

[@qzetu]

@@toolboss8410 Thank you for the response. Listen, I am a handyman and can not think of any realistic situation in which I would need a fan like that. Especially when I'm doing something like painting because Im constantly moving up ladders, etc. Perhaps you could use them while under a sink but it's still not ideal because that's more things to carry and most of the time, houses have A/C. I did consider no A/C but even then it will only move around hot air and get in the way. I certainly would not take it into a Attic because it's too hot and I don't want to breath in dirt and insolation. And it would be pointless outside. I think the most ideal place for those fans are on a desk. I'm open to other ideas, giving me one other realistic use for them? Tell me how a professional can actually use a fan like that while at work because I can't think of anything.

[@toolboss8410]

Well think about a plumber who comes to replace some old pipe in laundry room for 4-5 hours .. think about the painter who has 2 bedrooms to paint .. think of the electrician who has to rewire some bedrooms in remodel .. those are just a few .. ur thinking to big about cause of the size .. they are portable, can go anywhere and you be suprised how much air they can throw , but even on a low setting they get the air circulating 🤟😉

[@joaquinsuarez6090]

When I get the Dewalt on sale I could use it when work on my shed which has no electricity, I will use it in the garage while doing something

[@bluemantom77]

I need to get the Ridgid fan Bosch needs a fan

[@toolboss8410]

👍👍👍