Maytag Centennial Washer Error Codes and Reset - How to Find & Fix Maytag Centennial Washer Problems

[@JuliusBalogh-c1b]

Having had a 32 year career as technology teacher I appreciate the clarity with which you presented a complex system and allowed time and opportunity to observe and absorb. Thank you for helping so many. Keep up the good work.

[@lindagarris7861]

TY I recalibrated many times & wouldn't start. I can't pull Washer out bc I just had surgery. This morning I prayed and recalibrate and it's washing TY and I pray for you 😊

[@kellyfrost7258]

Thanks! I have watched numerous videos to determine what is wrong with my Maytag and how to fix it myself. While I appreciate all who have shared their knowledge, your videos are by far the most useful in my opinion. Your explanation, screens, and pace are all fantastic. I want to thank you and show some support. Sharing your knowledge and experience is a tremendous help to those of us on our own.

[@JamesCWilliamsPhotography]

WOW! I work in industrial repairs and have watched so many videos of all kinds. This is definitely the best! Your details and information are so well presented, great camera work and SOUND (so many videos have horrible sound!)!!! I feel very confident that I can now address whatever is wrong with my Centennial (the very same model as yours). Thank you so much, and if you found this video and have a bad washer, watch and learn!

[@logre9864]

Excellent!!! Thank you so much. We call Maytag repair and we're told there was no reset. You saved us $1k ( which we did not have!) You are my hero today!

[@DP69ner73]

This is what I like is someone who explains even the little things. I didn't even know the manual was inside the washer, kind of silly place to have it. I had already downloaded it and now with this video I hope I can diagnose the problem and fix mine. I had already unscrewed the latch and noticed mine is spinning and starts fast then stops and the high agitator speed doesn't seem to be working. Not sure if it's the capacitor or something else. Sounds like the agitator at 1st also isn't in place or off if that makes sense and I checked the screw and it is in tight real tight and its hard to even unscrew so I can't check to see if spindle is worn if that's even the wording. Thanks again for the tutorial and wish we could nominate videos for awards because this and all of yours deserves one for content.

[@StaebAdlex2100]

Using this video to diagnose the problem AND run the recalibration, I fixed my washer! THANK YOU! At first I thought it wasn't spinning. I came to KZbin and found you "washer not spinning" video. I went into the error codes and found a code that was not in the video. Then I found this video and it was the drain error. I ran the auto test, then the manual test, and the washer spun but did not drain. I found the part on Amazon for $25! It came next day, I installed it, ran the recalibration cycle, and IT WORKS! Thank you so much!

[@garyl3957]

Wonderful video !!! Originally I got ripped off by the appliance repair guy from Sears who came over to check the washer . He ran a two minute self disagnoses and said it would cost over $600 for a new control board to repair so it wouldn't be worth fixing and gave me a 10% off coupon to buy a new one at Sears and charged me the $79 diagnoses fee . After watching a few of these videos I found out it was the actuator so I bought a new one for $25 and now the machine works perfect. Sears pulled a total rip off scam to get you to buy a new one. I complained to consumer affairs but they said it's legal to scam and cheat consumers and they really don't so anything down there but collect their government pay.

[@pastordavey7314]

Fixed! My washer apparently was stuck in sensing mode, because when I cleared everything back to factory default, presto, it works as it should. I had an appt scheduled for this Monday for a repairman. $95 trip charge, $25 per quarter hour labor, plus part. I was looking at roughly a $175 repair bill. Not anymore thanks to you. Much respect.

[@allenpamscofield]

Much appreciated! Didn't know if my Maytag had a diagnostic mode...but it did. I was able to decipher the error codes and have a mode shifter fault. It's stuck in spin mode and will not agitate. Thanks for the video! You saved me a lot of $$.

[@drivesideways6550]

You do a Great job with this video! I was able to fix our washer with your shared Knowledge. The only problem I had was getting it out of the "calibration/demo mode" I ended up unplugging the washer and held the on/off button in for a minute, plugged it back in and it worked. With your code diagnostics and viewing a few other videos I was able to make a semi-educated guess at what the problem was. It did turn out to be the actuator. I had thought I received the wrong part through "Sears Parts Direct" and brought the new part to an appliance parts store because it didn't match the part on my washer. I was told the part had been replaced with the black plastic version even though they did not look similar. It was true, and the part I had received did fit and worked. Hope this may help others too.

[@MegaBaker123]

Gotta say this video was extremely helpful in getting my neighbors washing machine up and running tonight as he just picked it up earlier as a used unit that was supposed to work but wouldn't do anything when he got it home. Running through the diagnostics and the reset got her back up and running despite my lacking an entire understanding, but if a fumble wins the game I'll take it.. 😉 thanks for this one

[@marcolojewski126]

I just want to thank you for your videos. I have used several of your videos now. What I like is how you actually make your videos. Most people will waste 8-10 minutes micro explaining things like their audience absolutely has no idea what they’re doing. Which can be helpful. But if you’re looking for these types of videos you most likely you have some kind of idea of how to do your own work.

[@dennissaxton532]

Very good video, was a life saver, I ran the codes, couldn't quite figure them out, ran them again, no codes, is spinning like it should! Wife was hoping for a new washer! Not now!

[@prenard89]

I used the access to the fault codes and was able to restore the washer to functioning properly. I didn't have to replace anything, just clear out the Fault codes. We were almost ready to buy a new washer. Thanks

[@sillyputty4229]

Well done! It's heartening to see young people who know their stuff. Keep up the good work!

[@JohnShinn6078]

I finally found and stopped at a diagnostic video that is complete. All the others were very vague, incomplete and the narration resembled that of an auctioneer! Thank you! 🤠👍

[@LegionPCMR]

Hey man this was very well done thank you so much! Honestly I had no idea a washer was so complex. I've used bits, bytes and nibbles to diagnose giant crazy expensive machines but never knew it was how I was going to get trouble codes from my washer. I know this video will help lots of people and we all thank you for making it. Hope you're staying safe and thanks again!

[@bensappliancesandjunk]

These style machines have some EXTENSIVE features that let you basically test everything and know what's going on to fix them 90% of the time before you actually take a single component apart. Its a little bit.... Complex... To get down, but we deal with these machines at my used appliance shop so much, we just plug them in with electric anymore, and do a pre-screen diagnosis so we can figure out exactly what it needs before it moves down the line for refurbishment, because that 5min test can work out junk that could take a solid hour to figure out by just running the unit.

[@تاتسوكن]

jjjjjkjkjjjkjjjjjjjjjjkjjjjjjkjjjjjjjjjkjjjjkjjjjk

[@PattyQSlupe]

0⁹0nly o90999999999999999999999999999⁹

[@mikeputerio6853]

It was near the end of the video that you stated something I had never heard nor consider- after changing a part that effects the electrical system, recalibrate/reset the CB. Fantastic. Thank you.

[@bensappliancesandjunk]

Its extremely overlooked. The computer board doesn't magically *know* what situation a new component is in. Was the shift actuator in agitate or spin prior to replacement? The lid lock? What wash cycle? So many small things that the system assumes is true/false and it won't be able to conjure the situation until you force the machine to reset.

[@tomfelland2727]

Phi u[ou ioo stew

[@Ghost-xi6js]

Hands down the best, most descriptive how to video on washing machines. Thank you sir.

[@SuperReverbious]

Very useful to see how to open the top 2" panel, the location of the service manual, and how the error codes work. I'll be using this info to diagnose my washer that won't properly complete the spin cycle and drain properly. Thank you for making this video.

[@bobfogarty159]

Well dang! I put it in diagnostics mode and must not have done it right. I started to re-watch video to see what I did wrong AND THE WASHER STARTED UP AND STARTED WORKING AGAIN! THANKS!!!

[@WasherDryerMoney]

Well played. I know this video took you a long time to make. I’ve considered making this video but you have done a much better job than I could have ever done. I bet you are going to see this video take off over the next few months.

[@bensappliancesandjunk]

I did a video similar to this back in January and its my #1 video so far. But it doesn't include all the extras between the manual/auto tests and recalibration... I figured that now, 9 months later, I've learned enough to do a better, more complete video on this, so I took another crack at it. There's still more I can do better at on this, but the views/watch time is better than the last one, so I'll take it. I did the video mainly because I really liked Sears' video on the Kenmore VMW, but it just has how to get it into diagnostic mode, nothing about what all options you have, or the error codes themselves.

[@byronvontreal7046]

@@bensappliancesandjunk do you have a way I can contact you? I have some serious questions about mine!!! I have a similar model, just no agitator inside.

[@bensappliancesandjunk]

@@byronvontreal7046 should be on my profile for email

[@tristagarrett6484]

Your videos have been so helpful for us! We recently discovered our agitator wasn’t working… I had my suspicions months ago but my husband just figured I was complaining just to complain. Turns out… the agitator hasn’t been working since we bought it! The pin wasn’t attached to the proper spot so it was never engaging the agitation! A simple factory problem that wasn’t discovered for over a year! We ran the diagnostic test and then from the other video we got underneath and started examining the parts…. There it was!

[@KOLODNY95]

You bought yourself a washing machine from hell. Why didn't you just stick your money down a rat hole?

[@randibgood]

What other video was that, if you do t mind sharing? Thanks!

[@ramblereddie]

Thanks for posting this video. With your help I was able to find the manual and troubleshoot a bad drain pump. $30 on Amazon next day I was back up.

[@marshallwages5035]

These videos are extremely helpful. Thank you for taking the time to do them. They are so easy to follow and understand.

[@tressasanders7296]

I just took a whole class with the nicest teach

[@teresaborjon7976]

Wow this is honestly the best, and most helpful video I’ve ever seen!! Awesome job!

[@mejia69210]

My wife said we need a new washer! Me as a auto technician. Shit I'll fix it! Found out it's the motor actuator. I replaced it didn't work🤷‍♂️ I didn't know technology went this far! As in having codes. I recalculated before but didn't clear the codes. By clearing the codes & recalculating it. It started working as it should! Thanks for this video my friend 👌

[@hfnwo]

Had no idea the service manual was hidden inside. Instructions in the manual are a bit cryptic so your video helped make sense of the process.

[@hailey8574]

thanks for the help! I was able to trouble shoot without opening up the top portion because of your video! working like a charm with the codes fixed

[@Nick-fi1mc]

I want to go back to the 70s and the 80s when my mom had the same washer as when I was born until I moved out in my twenties..... Crap is garbage now

[@catherinem2692]

American made…lasted less than 2 years😥

[@TheAgencyMABU]

This was such a life saver of a video. Our washer just stopped spinning and the agitation seems to be jank but I didn't know what was up. This answered so many questions on how to procede.

[@bensappliancesandjunk]

Wow! I am so glad it helped you!

[@jonlilley2832]

Thank you for your tutorial, Ben! It's a couple days before Christmas (2020!) and I'm having trouble with my washer. Its timing couldn't be better! Sheesh!

[@bensappliancesandjunk]

Hope this helps!

[@sheacna]

@@bensappliancesandjunk can you help me with my washer?

[@Aepek]

Great job explaining this, as it’s NOT an easy thing to do for most homeowners; and even us Techs, can have some “troubles” IMO, as diff companies have diff steps for diag mode, and some still; haven’t updated the codes listing for older/current machines.....making things a bit “annoying” (which means ur in the iPhone with The Company’s Tech Support, &/or you are Googling the diag code number and seeing if get a bit on some site; heck, may even be lucky and the manufacturer has the code in their site😉). So, again, IMO, did a fantastic job explaining diag modes/codes so that most ppl can follow along and understand if you are not a service repair tech👍🏻👍🏻 Cheers✌🏻

[@valtrav8996]

Best video on youtube about maytag diagnostics. Helped me find the faulty part. Thank you.

[@suebeesue7472]

Funny I think I watched this one then went back and watched the one you made awhile back. Between the 2 I was able to get my kenmore 400 taken care of. Thank you so much. I really like how you make your videos user friendly

[@mitcentauri6237]

Not sure if I'll ever have a chance to use this, but it was fascinating to watch.

[@InkedDad]

Same

[@rlt1287]

I have this same washer. My washer will not work automatically. You have to manually set the knob on what ever setting you desire for it to perform the desired setting. It will not continue to perform a complete wash

[@spencerbeales8965]

Great video. Machine would fill with water then try to run and open the lid . Removed the transmission shift modulator and cleaned the pick-ups on the commutator and on the shift motor. So far so good.

[@connie2558]

Thank you, still having problems but did manage to reset. You give very clear instructions.

[@markfrancis4376]

OK AFTER WATCHING 4 OTHER VIDEOS YOU ARE NO QUESTION THE "MASTER" OF WAHSING MACHINE VIDEOS! THANKS

[@ballistiquebec]

Thank you so much!!!!! Problem was with the drain pump! Subscribed Love from Canada

[@markryder5774]

This helped me so much the only thing different is my buttons are yellow and I have an extra cycle. But this saved me a washer service call thanks. 👍

[@alan329]

Thank you for a wonderful video with excellent explanation and not talking to fast. Very well done.

[@marcmarc997]

Thank you for this video. Idk how much you saved me, but you did. The best on the net.

[@stevenlueck1862]

Your videos are the best, clearest, and most complete repair videos I have found. Really excellent. Only one thing, I have my Maytag drying now as I pulled tub, hub, and cleaned everything before I put in the new hub and put it back together. What I haven't found are any mentions of grease, silicone, etc when putting the tub back over the shaft. Do you recommend any lubricant/seal grease when putting things back together? PS Your video on the recalcitrant agitator was so REAL! This is my 3rd hub replacement and it was rough getting the agitator out. Hammer, dowel, hard steel hooked probes and a WD40 soak finally worked but my wife was already pricing a new machine. (Maytag Bravos - MVWX655DW1, 8 years old. (3 hubs, 1 actuator so far)

[@chuckferraris8489]

Thanks for the help!! I ended up changing the actuator assembly and now mine works perfect.

[@simon-nak8403]

Thank you for this video! You saved me about 1000$ !

[@SkiiDreamr420]

I love you 💕 Thank you so much! My brand new Centennial has been sitting idle too long. Now maybe my man will fix it for me! Thank you

[@daniellesavaiinaea4759]

Thank you for the video. Was able to fix my washer and run the auto test to verify. 😊

[@fredericocorrea9814]

Thanks so much for this video. You're a godsend. It is very thorough and safety is definitely important

[@bflash77]

Thanks homie. I was able to get back up and running thanks to you. I appreciate your time and effort!

[@ellahubele7790]

This was very helpful for me to diagnose, fix, and reset my machine! Thanks for the video!

[@jerryhart4352]

This is one of the best explained in detail videos I’ve seen in a long time Thank you

[@lisamagnuson6912]

Hands down ... best help video EVER!!!

[@curtismartin6373]

Thank you! This worked great to diagnose and repair my shift actuator!!

[@davidterzian4071]

Video was very helpful. Easy and clear instructions. Thanks for all the time you put into this.

[@joeyramsey6860]

Best utube illustration video I've evere seen👌bravo!

[@Debi-gv3pb]

Thank you ☺️ ol' grandma here fixed it with your help

[@kishanjagessar2047]

Thank you very much, the reset worked for me and my washer is running once again.

[@joseppebigdong]

Best video ever. Had a f 421 e 1 and it was cause the rotor was locked just like it said! Fixed!

[@juanaguilar3827]

Excellent video homie !! it made it really easy for me to fix my washer 👍🏼👍🏼

[@scottyjohn]

This video helped me fix my identical model machine. It needed reset, and it worked fine afterwards.

[@scottyjohn]

Nevermind...it didn't work

[@calebmonroe777]

I used the heck out of this video. I have the exact same one and this was very helpful, especially with all the codes listings etc

[@bensappliancesandjunk]

Glad it helped!

[@juanayon8261]

Thank you very much, extremely helpful All i was, was a reset needed but I couldn't figure it out alone...thankg you once again.

[@angelicalopez3040]

Hello mine isn’t wanting to turn on how can I reset?

[@barbm2375]

Thank you for this!!! I have a lot of error codes, most scary though is the motor fault. I’m no handy woman but I’ll see what I can do on my own 😰

[@bensappliancesandjunk]

Motor fault means the motor won't run properly. There are two main things it can be: 1) The motor is bad, or the electricity isn't getting to it. Check the connectors, and test the motor w/ a multimeter. 2) The capacitor that is underneath, near the motor is bad and its not jolting the motor w/ electricity when it needs to, to help it start. Look for physical defects (like something popped on the inside), and test w/ a multimeter. There can be other things, but we had #2 happen on a Motor Fault at my shop a week ago. Stumped my tech and I told him "Just check the cap real fast". 5 minutes later, the machine was running fine because we replaced the $20 capacitor.

[@migueltorres8174]

Amazing video man. Thank you for sharing your knowledge!

[@jesseschooler918]

This video is so well done and it is SO helpful man! thank you. seriously, this is just the best.

[@bensappliancesandjunk]

Glad it helped!

[@chuckselvy5142]

Thank you, hands down the best tutorial about these "sensor monsters" that I've seen.(unfortunately, I've seen about all of them, lol)

[@bensappliancesandjunk]

Glad it helped! I have to deal with these things every day, so I've tried to come up with a reasonable explanation on modes/features. They have a LOT OF GREAT FEATURES if you know how it all works! You can test almost everything thru the diagnostic system to pinpoint the failure, but without knowing what it is, you can get lost in a second.

[@davidcontreras4363]

Bad ass video! Thank you! Very informative…Never knew where to start with these new washers now I do. Thanks again!!

[@terrythurman5869]

Really good information. Thanks. My in-laws have a Maytag that will not even light up with the sense light. This last weekend, I tried to enter the diagnostic mode as you suggested but it did not seem to work. Would that be an issue with the board? I do have correct voltage testing at the terminals on the input power to the board. I think there was a small blue LED on the board but it was not lit. I will be going back today to check again since we found out it's not under warranty.

[@JamesBates-d6q]

Thanks guy you have been more than helpful .

[@bensappliancesandjunk]

Glad to help

[@carlcollier5568]

It's 11:50 cst in panama city, Florida. I cannot get my Maytag centennial washer into diagnostic mode even though I've watched your videos. Please help. Works great for awhile then before it rinses and spins it stops.

[@Jon-vc1kz]

Dude. You just saved me so much time and headache. And money. And angry wife.

[@ericcharlton311]

Exceptionally thorough instructional video! Thx

[@bensappliancesandjunk]

Hope it helped!

[@ViolentOrchid]

Thank you for helping me with my washing machine my landlord got used.

[@thunderpup10]

Thanks Ben, iv got the exact washer your showing, im off to the basement to try the code thing ,, thks oh by the way my maytag washer stops after washing clothes, i look in the drum and theres a pile of soaking wet clothes, but if i put the dial on drain and spin it finishes with sudsy water pumping out to the drain. Thks again from Canada. ps. i just noticed theres a rinse and drain also ,,,trying that now.

[@reynaquirozmendivil4449]

My sensing light stays on and the lid lock light blinks.. that’s not under your codes ? :(

[@clpbuttercup]

Mine too!! Cant find an answer for this 😢

[@demielizabeth18]

Did either of you find a solution?

[@clpbuttercup]

@@demielizabeth18 The best code I could make out was a basket fault. I changed out the shift actuator and was able to wash 2 loads. Then it did it again. I ordered a new cam replacement. When I put it down to replace it I realized the belt has frayed and come off, was also very loose to begin with. So I ordered a belt. After testing the actuator with an ohm meter it reads good. Sigh May have only initially needed a belt. While I was at it I removed the wash plate and cleaned. Inspected the tension rods because I have the jet engine sound when spinning. No rocking and moving across the floor. Just LOUD. The new belt has produced a sporadic squeaky sound in addition to water underneath. I have been confident that the bearings were shot to begin with. When I initially texted a repair shop with my symptoms, they said they didnt think that was the issue and I would have to bring my washer to Them! Did I mention that Im a stubborn, 4’ nothing, 65 yr old blonde? 😂 Tomorrow Im expecting a transmission casing. I relate this to Johnny Cash and his one piece at a time Cadillac song 🎵. Except its more than a dime. $285.00 to be precise. Haha Trial & Error, process of elimination.

[@clpbuttercup]

@@demielizabeth18 Being the REAL ZIGGY that anything that can go wrong will, I should always go with the worst of the 5 codes that are listed. The Smart machines arent very smart or there wouldnt be 5 to 20 possible fixes!! 🤬 Needless to say my Maytag Centennial and I have been spending a lot of quality time together! I vaguely remember the elaborate space and workings of a wringer washer in action but oh how I yearn for the simplicity and reliability.

[@clpbuttercup]

@@demielizabeth18 replaced the transmission and its working like a Boss now!!

[@sarahjohnson1435]

This has been so helpful! Thank you!

[@bryanhobbs7660]

Very well done video. Excellent job of explaining things. Thank you so much!

[@flyers4life773]

Awesome video!! Great job. Awesome information

[@stephendawg1]

Thanks, Ben! Very helpful today. Boy, the timing of turning the knob into diagnostics in touchy. Too fast or too slow. Got it though.

[@themono7508]

Great to find this channel, thanks for the help!👍

[@philnbeatz8184]

Very good video Sr. Awesome straight to the point and simple explanation!!

[@MurrayVetstein]

Had this machine - absolutely hated it! Bought a Speed Queen - night and day - no more playing around with a washing machine that takes forever -30 minute washes clean clothes now!

[@bensappliancesandjunk]

Sadly, the Maytag brand means nothing anymore. They are TRYING to ressurrect it with their Commercial-Grade VMW that has heavy-duty components but for the past 10 years, its basically been Whirlpools-by-another-name like their Amana series. I really, REALLY wish I could get my hands on their 5-year-warranty NO BS unit they've made recently. They must have figured out something to offer a unit like that.

[@paulwoods8950]

Thanks!

[@jsco8692]

What a great find. I'm subscribed and thank you!

[@zacharyking900]

From what position on the selector wheel do you start when you put the machine in self diagnostic mode?

[@leonarddichiara4863]

great information, thank you and God bless you!

[@vdoniel]

Hey Ben, I don't have a machine problem at this time. The main reason for my comment is to tell you your videos are great and I hope you have continued success. I just bought a new machine and was trying to research it. Anyway it looks a lot like this one. I'm guessing it's probably the same with a different name. Conservator vaw3584gw. I'm 67 yrs old and give up on finding an old style built to last machine. This one cost me 799.00 delivered. I hope I can make it last. We have laundry for 2 people. Emanuel County GA

[@vdoniel]

I'm back a year later. I didn't remember making that comment. Anyway the machine works well but I needed to recalibrate it. Why does it get out of calibration?

[@skunkedagain]

Your excellent video was the reason I was able to troubleshoot and replace the gears on my Kenmore. Thank you than you

[@smileshp]

This was a huge help! Thank you so much!

[@fidelbaca7643]

Really helpful! thanks for sharing your knowledge.

[@cowboydup]

thank you, great guide. im really curious what the problem/solution was to that particular washer, since im having the same problem with mine.

[@andrewsacks690]

Thx. My Whirlpool WTW4816FW2 top load washer stops during wash and gets stuck in sensing mode=blinking sensing light. I have not been able to reset and or enter diagnostics with water in the machine. If I MT the water it appears to allow me to enter reset and possibly diagnostics. Question is do I have to MT the water again to enter diagnostics? Does this indicate a specific bad part? Thx

[@stampedetrail2003]

That's mine! Thank you. With your help I was able to run a diagnostic and check the error code after that. F7 E1, and the (sorry I'm not super up on nomenclature here) agitator? spins pretty freely when turning by hand, basket doesn't get up to speed and spin out. So, should I remove the wash plate? Is there a clutch type of thing (rotor?) between the basket and the wash plate? Dang thing is only 3 years old, exactly like the one in your video but it has a glass lid. Thanks again for the videos. It was the rotor. Thanks again my guy.

[@BB-kt5eb]

I used to have this washer. It was actually the original Maytag Centennial from 10 years ago, before they added an agitator in the place of the impeller. It was great mechanically, but it didn’t wash clothes well at all because everything would come out only partially wet.

[@meganphillips685]

I have it now. Your absolutely right.

[@PhyllisGlassup2TheBrim]

With a piddling 800rpm spin speed, I would expect clothes to still be wet.

[@geraldgolen9157]

Completed diagnostics on my Maytag Centennial and got the F7E5 code. Which is the Mode Shifter Fault. Should I replace that Shift Actuator?

[@tching808]

I have this Maytag washer and normally when washing a load the lid locks , senses the load , spins a few times , then starts to fill with water to begin the wash cycle. Now the lid does not lock and is stuck in the sensing mode. I was having trouble getting in to the diagnostic mode but will keep trying and would appreciate any help on why the lid does not lock and why it is stuck in the sensing mode.

[@Cat-Love2-d8z]

Hi, I am having the same problem with mine. Did you solve it? I will appreciate your help. Thanks.

[@tching808]

Sorry. No I didn’t resolve the problems. The family didn’t want to wait and just bought a new washer from the navy exchange at at discounted price

[@charlie3306]

Thank you very informative. I saw my problem listed as you were going over the trouble codes, 'no fill or long fill'. Whether I wash a 1/2 dozen light dress shirts or a weeks worth of permanent press, it fills to same level, the max. Being on well water, not too bad, but if I was paying a city water bill I would need to address the issue immediately, so I haven't tried to resolve as of yet. Other than that, I think it is a good washer. It is not 'sensing correctly' on startup. Tare weight is off I assume, needs a reset back to zero if possible. Hopefully it's an easy fix. I've had the washer since 2011.