The Knife Maintenance Kit that Lives Inside My EDC Bag

[@blakenelson5590]

You should do a edc bag submission. I would love to see what other people carry in their bags

[@lucaluca570]

This is exactly what i’m looking for at the moment.

[@1975bartje]

Thank you for showing the Locktite stick. Never knew it existed and seems like the perfect solution for what normally is (or now was) a messy job. I ordered a stick even before I finished watching the video.

[@generalesdeath8180]

I've got that Maxpedition pouch in OD green! Mine has an extra mesh pocket on the front and molly webbing on the back. I use it to keep all my various EDC items organized and in one place instead of spread out in all my pockets. I need a couple ranger eyes for mine but I have customized it with lanyard beads. I absolutely love it and never leave home without it clipped to my belt.

[@creed0307]

Nice kit Taylor , I have a grungy old field notes with all my sharpening angles in my kit , definitely going to get a JRW cheat sheet .so simple. So practical.

[@SupperGammer]

Tip - put a small o-ring over the tweezers so they pack shut. And you won't loose it as you don't need to take it off just slide up so the tweezers open.

[@BestDamnEDC]

I did this as soon as we finished shooting the video lol

[@jatbatman]

I like this idea. May have to create something similar. Of course I don't carry a bag everywhere I go, so it's something I would keep in my rig.

[@nathanhitchcock2705]

Get a good set of reverse tweezers for those tiny screws! You'll thank me.

[@nickmartino2839]

Love the kit!!!!!!I have something very similar...except I seem to use and keep a strong telescoping magnet for a variety of tasks..... its small it fits well in small kits and so useful

[@bunyipdan]

Nice minimal kit ..... that said suprised you didn't have a sharpie, a micrfibre cloth, rust eraser, couple of band aids, a nylon pry bar and a better sharpening/edge care solution (DMT cards,, stand alone ceramic rod, and decent strop). Guess we all have our own idea of maintenance kit ..... for me it would be hard to keep it minimal if it went past a Multitool with Torx drivers

[@BestDamnEDC]

I do normally keep some Flitz in there, especially during the summer. But sometimes it just stays at home. 🤷🏻‍♂️

[@bizonte2218]

Very nice kit Taylor, I think some masking tape would be helpful to cover the edge while doing maintenance, just wrap it around on it self and put it in your kit. Cheers from 🇨🇱

[@unknownartist47]

Note pad is great for address, tele numbers,accident information and exercising your writing skills with a pen or pencil.👍

[@JavierGarcia-xz5vl]

Finally I get a video to listen to while I'm driving at work! 🙌🙌🙌 Miss your Monday morning Livestream!!!!!!!

[@OvelNick]

The lube leaking problem... Easy fix. Teflon the cap threads. Works great and won't leak.

[@BestDamnEDC]

It’s not threaded. It’s just friction fit

[@dangle2262]

Funny. I started the process of making one of these in basically the same pouch last night.

[@TheGuidedSharpeningGuide]

Nice kit. I know it sounds crazy but go to the grocery store and buy grapeseed oil best knife lube I've ever used and 1 bottle will last a lifetime. It really is an amazing lube and I fidget with my knifes all day.

[@vanquestgear]

Such a clean kit!

[@lesmontgomery7]

Thanks for the tips Taylor

[@JBiskitz81]

I need a good recommendation for a Ti own that doesn't take G2. I love the tactile turn, but it's G2

[@lalew2]

You could get another bottle/ container for the blue lube

[@dtom420]

What watch are you wearing in the video?

[@bigpeterchang360]

Do you not carry a 2A daily EDC if so what do you carry for protection

[@xxcal128]

Absolutely love the little prybar 👍

[@n1n984]

Great, now I need a pouch for mine.

[@DavZell]

Hey there. What watch were you wearing? Thanks!

[@guarddogfoaminserts777]

We might have to make a case to fit all of these 😊

[@philurbaniak1811]

All looks very useful 👍

[@l33tnull]

Can someone tell me where to get that watch tool? The link is broken.

[@jefferyc7822]

What kind of back pack are you using for edc at the moment? What do you carry this pouch in?

[@m4jqp]

Back to back vids? Lets go!

[@AlexS08]

Is the hat for sale? I need it!

[@Grim_NY]

Great video! Would love to see your separate sebenza kit

[@adawolf9483]

1 or 2 cheap ceramic magnets could help to not lose the screws.

[@dtzchar]

Nice kit Taylor

[@jasonera6251]

What does the strop do? I'm a noob on knives.

[@koolkid00012]

Strops help remove the burr created after sharpening a knife

[@jasonera6251]

@@koolkid00012 thanks. That makes sense.

[@cjcrook1]

Nice kit!

[@jaytongret]

Okay so I’ve looked through the comments as well as done a low level reddit and google search where can I find that good screw precision driver I want a zirc driver something fierce

[@BestDamnEDC]

Goodskrew is what you’re looking for. I have one of their Zirc drivers

[@jaytongret]

@@BestDamnEDC thank you ! Lawd I thought I was loosing it

[@nickmartino2839]

Sounds like you need ocd4edc new salve!!!!!! Slick em all..... man it works awesome

[@vitmacha6456]

Nice to see you with new energy! Keep the good work.

[@JG-rh3qp]

Great video, but it looks like you got the Vanquest PPM Husky 2.0, not the Slim 2.0.

[@BestDamnEDC]

I got both

[@JG-rh3qp]

@@BestDamnEDC I meant for this video it’s the Husky 2.0, in case someone wants to duplicate your set up. I’m just getting into EDC stuff so I’ve been enjoying going back through your videos!

[@JPC326]

Very cool one !

[@krypinz]

1:07 you just out of no where way louder than the beginning. its distorted audio 😭

[@woodlandreconjoshdrakes5509]

I would like to see a taylor designed knife. With all your knowledge , I'm sure you would make a bad ass knife

[@nickmartino2839]

I miss the Monday morning live stream to!!!!!

[@callingacejack1334]

As you love tritium, maybe do video jwith watches, in three to five categories from budget, but not cheap, to medium and expensive watches with tritium. Or different kinds of accessories with tritium. What you use it for and why. But you've kind of done it already with almost ever pocket dump of yours. Might just be a cheap holiday video or sick day vid by preproducing it....

[@matthewjsilvis3425]

Nice stuff

[@josuetorres4483]

*That lives* fix it quick!

[@xerostyle]

#pouchboiz represent

[@nasty_aftrshok2582]

Be honest do you ever use any of your tools like really use them?

[@BestDamnEDC]

Yes

[@EDCNC-YT]

Starting to look like “Best D*** Mullet”😂

[@jeffreylutz4848]

MKT price is not practical use the knaffs $30

[@SeanStDenis-ob1vh]

I got the nano lube and the plastic exploded all over. With i could buy a lube syringe bottle to put in my favorite lubes.

[@les.boyer.is.a.machine]

**that**

[@davidquesada5196]

First😁

[@wheeldrift5897]

Your vid title is messed up.

[@Arch1301]

knife is cool,what is it please share link )

[@armLocalhost]

Man, instead of getting the weight off that kit just get a couple more knives.