BleemSync on PlayStation Classic: How to play 2 Player using USB HUB

[@blualien]

Nice! Thanks for the tip! Going to Walmart now to get me some Onn hub.

[@8-Bit_Flashback]

Awesome.

[@TheYoungVulnerableAnimeGirls]

I've heard some people complain about when you're playing with two players at once that if one person inputs the same input as the other that then the input will be overridden for one of the players. Can you confirm if this is true or not? I see here that you're only testing out One controller at a time, which is fine and all, but if we have two people playing an actual serious round of Mortal Kombat at once is that going to be an issue if both players hit the same direction

[@george._sir._gemini.175]

It's true...

[@staceymcdermott6495]

I'm using the USB adapter out of pound land in the UK just found out you plug the adapter in the 1st port from your video nice one thanks! Had done the adapter in the 2nd controller port with the USB with bleemsync and retroarch installed and my PlayStation mini don't like it it boots to the standard version then trys to boot bleemsync

[@walking00dead]

has this worked for you mate ? im from the uk too and want to buy on to try it out

[@PopPunkNerd]

I wish you were able to download all the games in the console itself like the snes classic .

[@danielrolon56]

Same

[@tokyohanamura]

Agreed, but I’m fine with the flashdrive cause it feels like plugging in a memory card

[@ThomasBrocks]

Look here.... modmyclassic.com/project-eris/

[@CarbajalQZ]

Can you play 4 players? I’m thinking of buying all this stuff just to play Crash Team Racing (CTR) with my friends

[@silenthillbandit4755]

no you can't. game crashes. too much for one port. at least to me that happens

[@CarbajalQZ]

Luis Cuevas well that sucks /:

[@MisterPotter]

@@CarbajalQZ you can't, it's not related to port number only, it's also that the emulator isn't powerful enough, it's a cheap one

[@CarbajalQZ]

Dream Travel I just bought all this stuff already I couldn’t wait. Up to two players is still fine with me and as the emulator goes it’s all playing perfectly fine for me no issues at all other than I can’t play up to 4 players with my friends

[@apc2304]

do you have the list of all the stuffs that I have to buy, obviously PlayStation Classic mini itself, the usb multiple connector, pendrive. Do i need anything else?

[@luisangelcruzrobledo4121]

Working in bleemsync and project eris !

[@culvercat11]

Just curious, did you try these out with any arcade games? Like will more than two controllers work to play four player arcade games like The Simpsons or TMNT?

[@Demonscorpion4482]

......I bought another usb hub, one that's powered, because I didn't know you could use the first port for both controllers. Thought it HAD to be in the 2nd port, with the USB and 2nd controller. I was having power issues, (like it turning the system off), usb errors....I just tested the first port, I'll let you guess how that went. Thank you for this video, very much appreciated.

[@8-Bit_Flashback]

Glad it helped you out. If you could let me know if you have any issues using the powered USB hub after using it for a while.

[@Demonscorpion4482]

@@8-Bit_Flashback Sure thing, it should be arriving tomorrow so I'll be testing it out.

[@Demonscorpion4482]

@@8-Bit_Flashback Wanted to throw out a quick update, been using that powered hub for a couple of days now, and no issues running the USB stick from the hub when it is powered, as of yet. I'll be honest, I don't play with it powered 24/7 and the stick in it, I usually just reserve the second port for the thumb drive and hub in first port for 2 player. The few hours I have tested though randomly, with powered hub and usb stick in player 2 port, have been successful and no power issues or sudden restarts like previous hubs with no power option.

[@8-Bit_Flashback]

@@Demonscorpion4482 awesome good to know thanks man.

[@waldolamelodia]

Good video, it works for another systems?

[@74bobby]

Great Video Brother

[@8-Bit_Flashback]

Thanks man

[@shoot_the_glass5654]

To tell you the truth, I've had the old ps1 phat and most of that time I played with the dual shock 1. The ps classic pads feel really nice to play on even though they are downsized from the originals, they feel good with retroarch specially if your playing SNES titles.

[@Nibot2023]

I have a Targus 3.0 usb hub and it doesn’t work and I have bleemsync 2.0. Do I need a driver?

[@YugiohMemeSs]

hi thanks a lot many tutorials I was using otg cable but you helped me a lot now i can use the hub thanks here from brazil

[@jb_terahertz]

Please make a video on wireless controllers with bleemsync 1.0 which controllers work. 🙏 No one has made a video on compatibility with 1.0 bleemsync and multiplayer. (Wireless).

[@spoonman4024]

Second this- please!!

[@melmarrison8769]

What size memory card did ypu use? Would a 64gb card work?

[@opjz]

I Try with targus 4 port usb hub ACH114US but dont work I think only works with the software BleemSync 0.4.1

[@felsonrovillos]

Have you tried it with two wireless 8bitdo dongle on the hub?

[@rodneymercado7195]

THIS is the question on most people's minds who want to get the most out of the system.

[@rodneymercado7195]

My dude, I tried it, doesn't work

[@TheOnlyIchiban]

Will these work with project Eris?

[@chandrasantoso9256]

Is it also working on retroarch PS classic?

[@ToxcynTV]

Insignia 4 port usb 3.0 powered hub confirmed working no issues

[@8-Bit_Flashback]

Nice

[@BeatzByMiix]

Do you know if this Insignia Power Hub will work with the flashdrive plugged straight in? I've a SanDisk 128GB Cruzer Blade that I was playing around with last night but it won't read the data on the flashdrive. I had a read up and a powered hub is needed for it to gain enough power as the Classic has a power limitation. Just not sure if it's certain power hubs that are compatible, or if it's certain brands. The 64GB version works perfectly fine.

[@ToxcynTV]

USB must be plugged into the hub or it wont read the drive a all unless the stick is 32gb or smaller. Some larger sticks work but its hit or miss. The hub will always work even hardrives.

[@ChevysFox]

Have this insignia hub and 32gb but it isn't starting auto bleem... any tips?

[@ToxcynTV]

Oscar DaGrouch I don’t use autobleem

[@Cokejunk86]

thx for sharing your experience. I appreciate.

[@captainyo1282]

If I use two of the same controllers they won't work but if they are different kind of controllers then they work

[@chrisman2500]

Where’s the best place to go for games?

[@akadwriter]

Will this work with four players for say Crash Racing?

[@victorromero1568]

I have two actual Sony branded PS1 Dualshock controllers and there are many Dualshock to USB adapters. Which ones would you recommend for the PS Classic?

[@ringrang2301]

Any with usb 2.0 will work

[@paxtm6437]

the walmart one makes bleem sync crash right when it powers on. how do i fix this?

[@tokyohanamura]

pax TM had the same problem! You’re starting from square one.... format the flash drive, then drag & drop your files. It might give you hell, so you might have to let it make a new backup

[@timbear8258]

Can you do this with 2 8bitdo adapter to have to ps4 or xboxone controllers connected wirelessly?

[@werland1]

I want to know this, too.

[@SegaDream131]

Can you use a powered hub the same way or will it burn something up?

[@spoonman4024]

Have you tested hubs for 1.0 yet? Planing on trying some myself but would love to know if you already have.

[@8-Bit_Flashback]

Works good

[@justinz4351]

SanDisk Cruzer 128GB USB 2.0 Flash Drive (SDCZ36-128G-B35) I have this flash drive. Which powered USB hub do you recommend now that it's been a few months? Thanks for your help

[@julianf147]

What about using a usb hun with a wireless controller that’s what I’m waiting for

[@royceguitarist5697]

i tried the 2nd one, the targus one after i watched this video, but don't know why it didn't work

[@Vogeluff]

great. knowing that this works i'm wondering why no one yet added this internally. its all just usb so it shouldnt be a big problem. you could have your usb stick inside the psc and have the hub reach to the 2 controller usb ports on the front. it would look stock from outside, the little usb stick hanging on the front was the biggest annoyance for me so far which kept me from attempting to mod my system.

[@orionx86]

I'm looking into it. I think the main issue with this is that there isnt a 3rd usb port inside so you have to disconnect the legs of the usb port, bend them so theyre straight and then cut and solder the usb hub wires onto the board, on the other end, pop in the usb or throw it on a tiny extender (or recable it from standalone ports), use the cut usb end cable and attach the cut end onto those legs on the port.

[@gregorycates9477]

I have a usb hub combo with a card reader that does not work it’s by PNY. Has 3 usb 2.0 , ms pro duo, m2, sd/mmc and micro sd

[@puertoriconnect4611]

I wish there was a way to actually load the games on there like you can with the SNES & NES Classics.

[@Vogeluff]

just cut the controller port 2 usb cable inside the console and readd a female usb end. so u can have the usb stick internally.

[@solonaravanroth1433]

@@Vogeluff thats the hard way. The cable terminates in controller at a micro usb port. Hide all that shit inside the controller instead?

[@stimorolication9480]

@@solonaravanroth1433 none of this is even close to the easy and elegant way you can add games to the Nintendo minis. Even with usb-otg it goes in the back and doesn't occupy a controller port.

[@MrLaurencetureaud]

Would I be able to play crash team racing 4 player?

[@4EVER_KlNG]

Have u found anything out yet? I'm curious as to how to do this as well.

[@msa3daldekhayel]

@@4EVER_KlNG Same

[@joseluismalavemedina7336]

I bought the PS1 Classic because I want to hack and play MK Trilogy, can you put the link in the description of your games folders so I can download them without any problems? Please I need it MK TRILOGY is my favorite! 💖

[@CesarQCC]

Jose Luis Malave Medina www.datafilehost.com/d/4c67e3d1

[@HazF97]

Can i play more than 2 players ?

[@momoqahtani6545]

Im using bleem sync 1.2 And my classic looks like is lagging when i use hub usb to use controller 2

[@SoarPro]

What about Sabrent USB 2.0 4-port Hub?

[@cefalopippo3397]

i have one question, (if anyone have my same situtation). i tried an hub but when i open the ps mini with the hub the ps mini doesnt recognize the controller. if i play a little while the game is open and then i put the hub it recognizes both the 1 and 2 player. (only with the games on usb), not with the games of the ps. is normal?

[@marcelovhm1]

Love you, logical, but, didn't think of it right away. ahaha Thanks.

[@barbas20]

The games have lag?

[@BounciestBen]

Where can you buy the second controller?

[@Nima_Saboora1385]

Very Nice

[@andrewdupuis1151]

the first hub you have I have one does sd its keeps disabling on my computer . i think theres something wrong with wiring. its made by Nextech I wish took it back but I lost my rest for it get another one

[@jomalova]

Is there anyway you can share your build?

[@tdome3000]

What PSU did you use exactly?

[@GrandeGio95]

Thank you sir :)

[@UttRConcrete]

Something about subzero with his arm up like Scorpio doesnt look right.

[@kaspite]

donde puedo descargar los juegos que almacenaste en la micro sd. muy buen tutorial saludos.

[@ElricSowrd]

A Metal Gear Solid Theme, huh? ☺

[@LAGUNAMAN1972]

did you do the solder hack to get this to work

[@ShindiY]

Does BleemSync 0.4.1 work on Japanese playstation classic?

[@XenoByte]

Thanks for the vid, although for whatever reason, if I have the second controller plugged in the system will just crash and shutdown if the second controller is plugged in at the bleemsync menu, but works fine if it's in any game.

[@rexuscrxgoxel]

😱 👏👏👏

[@RelentlesSoul]

You pronounced Insignia correct.

[@8-Bit_Flashback]

good

[@cooldudes6025]

Can anybody help me out please? I bought the INSIGNIA hub and it won't recognize my controller! What can I do to fix this issue? Any help is much appreciated : )

[@godskillers666]

do you have music in mk?

[@10120003]

I had one on my room and it works Onn Travel hub S/n: 11b98209

[@BlabbermouthShow]

thanks, I was wondering about this!

[@stellarola]

This thing need an internal mod, so both ports are free.

[@TheRealDanMan]

not enough internal space for games

[@stellarola]

Thats a pretty funny troll. Nicely done.

[@HankBlockOG]

Your a life saver 👏👏👍

[@mikegfl6680]

4 player?

[@camilo8691]

Targus is 2.0 or 3.0???

[@Nibot2023]

I have the 3.0 and it doesn’t seem to be working but I am a newbie so I don’t know if I am missing an update or file for it to work.

[@chuy-retro-gamer1231]

Gracias por la información, sólo me falta ese adaptador para jugar de 2

[@simonemad8216]

Thankyou!

[@tokyohanamura]

Do NOT use the Onn one in the same port as your flashdrive! It messed up my BleemSync flashdrive where I had to format & copy all the files again! After putting the hub on slot 1 & plugging both controllers (w/ slot 2 being only dedicated to the BleemSync flashdrive) it now works with no problems! The best solution is to buy a 90 degree OTG to plug into the back of the system (which I now do). Not only does look more neat & free up the other slot, but it also shuts down BleemSync/Project Eris in three seconds instead of 1-3 minutes

[@modisofi8180]

I suffer the same issue .. could you please send me a picture of your otg and how do you connect your PS to my email [e-mail]

[@tokyohanamura]

Modi Sofi just google “cy micro usb 2.0 90 degree adaptor” Pay attention to th3 position! It has to say 90 degree left just like the one in the video!

[@timesup5105]

Thank you! What’s the max size sd card I can use? Also do I need to rehack my system? Or can I just plug and play with the upgraded rear usb slot?

[@arnosoewarno1973]

Thanks you

[@Nima_Saboora1385]

خیلی هم عالی

[@tema4282]

херня это, они могут работать любые, но рубит их на 4-5 минуте. иногда раньше. пытался так поиграть: вырубает постоянно. перетыкаешь - норм пару минут и опять. инагда рубит один, чаще - оба. питание там ограничено на передние входы. нужен либо хаб с питанием, либо флэшку сзади через отг переходник рубить (на алике стоит руб 150)

[@davidvanbergen8716]

does anyone have a European Amazon hub that works?

[@joseortega1904]

Amazon basics 4 port hub only $6.99

[@8-Bit_Flashback]

Nice

[@BusterPikachu]

The hub man is the only one I have so I got lucky lmao

[@joshmatthiesen4552]

I know how to do this lol. What about the new update? When will that drop?

[@8-Bit_Flashback]

A Bunch of people have been asking about 2 player. Update..not sure they are working on it in their spare time so it could be a while.

[@andreg3912]

BleemSync 0.7 is released as an internal alpha for testing for the supporters of the ModMyClassic community. Swingflip said they will release version 1.0 next week.

[@joshmatthiesen4552]

Andre G dang I wish I was one of the testers lol. Mine seems to not be working correctly

[@amarg7657]

Call it a first world problem but I hate how in order to play with more games you need to take up a USB port and in order to play with more controllers while using a USB port to add a memory card to play games you need to use a USB hub it’s just so many wires and things happening at the same time it makes the system look ugly I wish everything was internal for example it had Bluetooth installed and or you can install the memory card on the inside

[@solonaravanroth1433]

Hide the hub and memory card inside the controller horns. Cable terminates inside controller in a micro usb

[@Mike-t5r9q]

Too much work just buy a Nvidia Sheld and call it a day lol it plays and does more then the ps1 classic

[@figment1988]

You might as well go ahead and get a PS classic now because some stores as of last week, have reduced the price to 30 bucks

[@poopikins]

@@figment1988 30 is the most I'd pay. I'd be happy to pay $20 knowing the modding I can do with it

[@figment1988]

@@poopikins I'm sure that the 20 buck drop will happen very soon if people are still not convinced by the $30 drop.

[@gabe1929]

Thank you!

[@gabrielegattari3953]

good! thanks

[@Javadmus1c]

thx man

[@TheIrishAmish]

Thank you very much!

[@danielrolon56]

Thank you!