How To Repair The Remis Cab Side Blind Hinge | Help, Hints And Tips

[@gabyjaeger-berge7444]

Hallo Bob, nun - 5 Jahre nach deinem Video - habe ich genau diese Hilfe gesucht - mittlerweile habe ich recherchieren können, dass die kleinen Teile bereits über 3-D-Drucker einzeln angeboten werden und man nicht mehr den ganzen Satz kaufen muss - vielen Dank für Dein tolles und hilfreiches Video - Kleber war auch mein erster Gedanke…., aber Gott sei Dank noch nicht umgesetzt …😊

[@BobEarnshawMoHo]

Thanks for your kind comments. I'm glad this video is still useful.

[@cliveffitch5202]

Thanks Bob, very helpful video and great comments. Just finished the job on our van. Pain in the neck. Seems a popular job this one, so hope this helps others a bit. I couldn't get the old hinge tab dug out, so I had to resort to drilling it out (3mm drill), and in the end achieved this easily, by drilling vertically down into the top of the remaining tab, without drilling the aluminium strut. This broke up the old hinge tab, and what couldn't be pulled out, was pushed harmlessly down further inside the strut. The previously drilled hole in the side of the strut seemed to be there to help clamp the tab in. After removal, just file lightly inside to remove the clamping hole burrs and any other residue, and fit the new hinge piece. I bought a pair of hinge pieces only, which were stated as being stronger, and had good reviews. These were very tight, so I simply filed the ribs on the tab's flat edges a little flatter to achieve a comfortable but tight fit in the strut, so that it can be easily levered out again next time it (hopefully doesn't!) breaks again!

[@BobEarnshawMoHo]

It's quite a surprise how many are watching this video, which I made a few years ago, so it must be a common problem.

[@zarrless]

I just finished this repair in our RV. Man what a job. In my case I had no chance to get the lower part pulled out with a plier or screwdriver because it was so stuck and crumbly that I basically had to disintegrate all of it. Took me about 1 hour of filing, drilling (1-3 mm drill) and levering with lots of cursing to get all the remnants out of the way and have the new part fit. In the end it worked though, very satisfying :) Let's hope it lasts for a while!

[@BobEarnshawMoHo]

Yes a really fiddly job!

[@malcolmfox231]

Thanks for the video, Bob. I had the same problem trying to get the broken hinge part out, even though mine wasn’t glued in. Eventually by drilling 2 x 3mm holes in the end of the hinge I could use a pair of long nose pliers to pull it out. When the blind on the other side breaks (which it surely will) I’m ready!

[@UrbFoxFact]

great video. thankyou for sharing your knowledge. same issue, same side. flimsy rubbish and yes, it broke even though i have been VERY careful to treat it like fragile, flimsy rubbish.

[@gallivantinggalantes]

What a fiddly job, well done 🙂

[@jaynehook2520]

Thanks for all the tips, really useful to us newbies.

[@mickm9307]

Sorry Bob - just found it in video description. Thanks again

[@pamkriesl9475]

Best and cheapest fix, drill a very small hole right through the aluminium rail/track -while positioned as it should be for the hinge to work. Then poke the smallest, neatest split pin though. Remove excess length with side cutters and spread flat. Leave a little bit of "play" in the length of the split pin length, so there is a little bit of "side way wobbble" movement. Best part is it will probably never need another repair job and you do not even have to remove the lower part of the hinge from the aluminum rail. I enquired to supplier as to the cost and waiting time for replacement plastic hinge and was told 5-6 months from Germany!! Have taken photo of finished job before dabbing with black paint to make the repair inconspicuous.

[@BobEarnshawMoHo]

Thanks for sharing.

[@keithbradfield7825]

Well done

[@lindagriffiths5739]

Job well done 👍👍👍

[@jackiesmithsmetaldetecting]

That was a tricky job , currently watching your 2018 tour when you went on the channel tunnel

[@tonymarsh6748]

Well done bob 👍🏻👍🏻

[@kevandrews4699]

Nice one bob u got it out in the end I bet u had a few word to say as u were doing it aswell at least now it u can break the other side and hav a few more word to say cheers .kev

[@hanvar777]

Helpful video. I had a similar problem and learned a thing or two from this video.

[@BobEarnshawMoHo]

Thank you

[@fionapitts4047]

Great video! How do you repaid a blind on the side of the motor home that wont stay up?

[@BobEarnshawMoHo]

I don't know, never had that, have a search on KZbin, there's usually someone with your problem, maybe this one from my friend Martin The Caravan Nut helps: kzbin.info/www/bejne/p3vdn5uioKmrqas

[@carolinemchale]

Thank you Bob for your very helping upload on fixing blind Going to tackle my blind the weekend & follow by your guide On a separate note, what are the little hold back straps you have put on your blinds to stop them from rattling O boy does mine rattle when driving Many thanks🌹

[@BobEarnshawMoHo]

This was on my previous motorhome. I think I used a sticky velcro strap.

[@carolinemchale]

Thank You Bob I'm only a Newcomer to your channel & yes I see going thro your uploads you have recently brought a new motorhome I have NOW subscribed to your channel Some GREAT information on it I'm delighted I have discovered your channel Thank you🌹

[@BobEarnshawMoHo]

I'm waiting for a new motorhome - hasn't arrived yet. 🙂 Thanks for subscribing. Since the video on the blinds in the Swift Bolero 714 was made, we bought our current motorhome a Swift Kon-Tiki Sport 574 in 2019, and we're now waiting for a new Swift Kon-Tiki 784. How time flies!

[@paulwaples2682]

Took old hinge out, drilled through holes left in the sliding piece inserted a paper-clip bent ends over job done 5 minutes

[@stevegolding4273]

Well persevered I'd have thrown it all away when the glue didn't work! On another note are you a member of any moho clubs or organisations and if so which ones and what are the pros and cons? Your views and comments would be appreciated as you always tell us as it is! Nice to see you enjoyed the baby bailey. Many thanks!

[@BobEarnshawMoHo]

Thanks, I did feel like packing in the job in at one stage. We're members of both The Caravan and Motorhome Club and Camping and Caravanning Club. Main benefits are being able to book sites on line easily and with the CMC being able to change sites easily. Lots of help, advice, discounts and both have a magazine. For many members access to the network of club sites and smaller locations is great. Having so much to choose from.

[@turbostream7925]

Those remis blinds are the most flimsy, complicated and expensive things known to man. I have had mine off to try and reduce the rattles, I now have a rag suitably stuffed on the bend of the window. Will take a mental note to be even more careful than I already am when closing them. Glad they were standard on my hymer. Curtains are much simpler!

[@BobEarnshawMoHo]

I may have a solution for some of the rattles. Watch this space!

[@turbostream7925]

@@BobEarnshawMoHo I found the velcro unstuck when I removed mine, that cured most of the rattles plus the cloth. It only rattles on the rougher roads now. Looking forward to the "cure" .

[@Mike99Nine]

You made a blinding job of that Bob

[@BobEarnshawMoHo]

Lol.

[@stewchesman5259]

Good job done. Well done Bob ;))

[@markandtraceysmotorhomeadv2345]

Well done Bob good job, is the Tank museum next.

[@BobEarnshawMoHo]

After our update on Friday I think.

[@markandtraceysmotorhomeadv2345]

@@BobEarnshawMoHo Look forward to it.

[@Robertonnz]

Good job, Bob. I would have been saying really naughty words and ended up taking it to Todds I think.

[@normanlazarus1836]

Really useful video Bob, where did you get the replacement parts from?

[@BobEarnshawMoHo]

Link in the description.

[@leesaboocrochet]

My hubby needs to do this to ours! What size drill bit did you use please?

[@BobEarnshawMoHo]

A very small one, to fit the indentation.

[@leesaboocrochet]

@@BobEarnshawMoHo He's taking his whole set lol!

[@venturerv6851]

Hi Bob, Where did you by the parts from with regard to the door blind?

[@BobEarnshawMoHo]

It's all in the video description.

[@mickm9307]

Hi Bob - I have same problem! Can you let me have a link or name of the supplier for the £26 kit you got? Like you, I only need the little plastic hinge piece!! Thanks for the helpful video!

[@BobEarnshawMoHo]

www.leisureshopdirect.com/caravan-accessories/caravan-blinds/remis-blinds/remis-telescopic-guides-ducato-iv-transit-incl-hinge

[@Moho-bits]

Good video about a very fiddly job. After watching this, I would be inclined to drill straight through the broken hinge insitu and use a small bolt as the hinge. 🤔

[@garyfrew1330]

Hi bob have the same problem were did u purchase the parts from pls cheers Gary

[@BobEarnshawMoHo]

There's a link in the video description.

[@johnreynolds1698]

Broken mine so looking for a hinge.

[@BobEarnshawMoHo]

Have a look in this video description the ebay link is where I bought in from. It look a couple of months to arrive!

[@bridgetsalter265]

👍bravo Bob😉

[@BobEarnshawMoHo]

Someone once said, things that seem impossible are easy once they are done. Or, something like that.

[@wallabybob3020]

Mine broke about six months ago and yep, I glued it too. 🙄Thought that would fix it and it did - for a while! So now I’m facing this same fiddly job and I’m not looking forward to it. Why manufacturers can’t just sell you the part you need is beyond me. That hinge should only be about two quid and probably costs them about three pence to make (in China!). If I order it now, I might get it before Christmas - 2023!

[@BobEarnshawMoHo]

Yes, I'm trying to be so careful on my current motorhome blinds. They're not the strongest things!

[@stevescriv43]

Where did you source the parts please Bob I have searched but no luck. Thanks

[@BobEarnshawMoHo]

The link is in the description.

[@stevescriv43]

@@BobEarnshawMoHo Thanks bob I don't suppose you have a link direct to the part as I cannot find it on their site Thanks

[@BobEarnshawMoHo]

@@stevescriv43 this is the link from my description: www.leisureshopdirect.com/caravan-accessories/caravan-blinds/remis-blinds/remis-telescopic-guides-ducato-iv-transit-incl-hinge

[@brianlaws5205]

Where can I buy these hinges please?

[@BobEarnshawMoHo]

Please look in the video description.

[@wurstspeel]

Hey guys... The solution is... Just drill with a 3mm wood driller directely from the top into the plastic that stayed in there... The left over plastic will go down then into the rail... Everything is done in one minute... Don't try any screwdrivers or pliers... Makes no sense... Have fun... And thank you for the video...

[@BobEarnshawMoHo]

Thank you. My mistake with it was I'd tried glue first.

[@ArnoldClarke]

Anyone have any ideas how to repair the frame when the screw snaps from the frame.

[@BobEarnshawMoHo]

I haven't I'm afraid

[@SMITHYSKONTIKI]

That's my luck such a simple looking job turns into the biggest faf ever.

[@BobEarnshawMoHo]

Me too

[@tonyd48]

Why not drill down to remove the lower part of the hinge, no drilling through the blind. Just bought the hinge parts from Rose plastics, £5.

[@BobEarnshawMoHo]

It's a while ago this video, but I don't remember drilling through the blind. I had glued it in so it was particularly difficult to get out!

[@soccerplayer]

If something is broken or has problem. Me : Totally destroy it for my stress reduction.

[@BobEarnshawMoHo]

Not letting you near my stuff. Lol.

[@soccerplayer]

@@BobEarnshawMoHo you better not Bob. 😂

[@davidtolley4979]

Good job but you should have called Gadget John 😂

[@BobEarnshawMoHo]

Thanks, I could have done that, but I couldn't find anything on KZbin about how to repair this blind. So, wrong or right there it is.

[@davidtolley4979]

Bob Earnshaw Will their is now and if it works and looks ok it’s a good job 👍

[@kroozer5215]

Had the same things break on our cab blinds - they look exactly the same as yours, both sides broke off within a week of one another (whats the chances) I tried gluing and plastic welding but they just would not hold - i was unaware that you could get the parts so i ended up buying a new set of blinds x2 for both driver and passenger windows - I hope the gorilla glue dont come back to bite you on the ass Bob, cos i can bet ya they will break again i its just a matter of when - bloody crap design in the first place - great vid though.

[@timhills491]

Picked a pair up off eBay for EUR 5.99 Being non genuine, they were not handed. Had to file to get pins to fit also take a bit off one side to right hand it, & a bit more gentle filing on the back to get it to swivel. Rather than glue it in, I’ve pop riveted it in, and it all works O/K. Only time will tell regarding durability. Refer 2x REMIFRONT SIDE DOORBELL CAMPING CAR RENAULT FIAT FORD REMISFRONT STORE Seller information stormwind-store Took 3 weeks to deliver to me in New Zealand (pretty good) ps Thanks Bob for a great video😊

[@BobEarnshawMoHo]

Thanks for the information.

[@nixonmark42]

Well done bob. Good job 👍😁