Me after the video ends: What else ya got, gimme more!
@aaroneclipse5143 жыл бұрын
I jumped out of my chair when I saw this, yeah!!
@tadashiamc97143 жыл бұрын
Same
@lorenzoserrano3 жыл бұрын
can't wait for the video on tech's helmet - the files are on his store! his is definitely among my favorite clone helmets.
@MigMonkey3 жыл бұрын
Just pressed print on this one! Echo is in the garage getting some early sanding done. Loving these files!!
@jameswoodford2823 жыл бұрын
Just got the files and want to print my own, tell me how it fits?
@rubenlanting58223 жыл бұрын
Yesss another helmet tutorial lets gooooo
@David-nv1ep3 жыл бұрын
Could you post more prints for the phase one clone trooper like one with the ranger finder. I would love to make a captain Keeli with one of your prints.
@issieplayzzz3613 жыл бұрын
Never disappointed or dissatisfied with your work, great job!
@Brent_005UTD3 жыл бұрын
That is a so cool helmet keep up with the great work
@Cybernaut5513 жыл бұрын
Wrecker's helmet is really innovative and unique. That's why I enjoy this video.
@trevorriordan88973 жыл бұрын
Just bought 4 helmets from you. Love the files. Very high quality! These are amazing!
@victorsalas44463 жыл бұрын
Happy 44th anniversary of Star Wars: A New Hope everyone!!!! 🥳🎉
@aaroneclipse5143 жыл бұрын
I’m glad I wasn’t the only one who remembered!
@CatYellowRanger3 жыл бұрын
That is the most beautiful Bad Batch Helmet I've ever seen!😭
@NoahMagBratwurst3 жыл бұрын
Commenting to put this in everyone's recommended
@hereet70673 жыл бұрын
That was really cool to watch!! I especially liked that I got to see how the helmet looked before the paint and gotta say I wasn't expecting it to look like that, it kinda looked like a mix between our face masks and a biking helmet and it looked cool, but you did an absolutely amazing job with the paint, can't wait to see more!
@asphal.t3 жыл бұрын
Love these videos. Have you ever considered doing this with helmets from the Halo series? I feel like your painting and weathering techniques would look cool on them.
@bronxsmash88693 жыл бұрын
Wrecker is very much my fave of the bad batch
@kainoctis77243 жыл бұрын
Didnt he just get rekt by a 100lb woman though? 😂
@MrRedCape3 жыл бұрын
You are DA MAN! I've been waiting for one of these!
@galaxyace94923 жыл бұрын
Beautiful 🤩 I LOVE BAD BATCH SO MUCH 😍
@LemonMeerkat2303 жыл бұрын
Wrecker is my favorite member of the bad batch it would be a very good and accurate replica of the black series wrecker helmet if they made one.
@samuraijedi16693 жыл бұрын
Good soldiers......love this helmet!!!!!
@RDR9113 жыл бұрын
Thoughts on using Velcro instead of that putty to put the visor on? I’m thinking a more sustainable approach for swapping out one visor between multiple helmets.
@Tcustoms3 жыл бұрын
Nice! If your on a budget and want a better looking visor than just plane tint you can use an iron and wax paper to flatten out a cut 2 liter bottle and put the tint on that. Be carful not to melt it!
@SgtInvictus3 жыл бұрын
Hey, you should do the echo bad batch helmet next I think it’s super cool and I think you’d do a very good job:)!
@BlueJay-rv2rd3 жыл бұрын
7:04
@BrickArmyProductions3 жыл бұрын
When you make these videos, do you think you could tell us about the visibility in the helmet when you are wearing it? Thanks!
@MrBrainPlay3 жыл бұрын
Depands on the Tint but most likely its like to see through a good pair of sunglasses and the FOV depands on the Helmet. Wrecker ist lake you squeez your eyes together, a Clone and a Stormtrooper can just look straight a Mandalorian can see a bit more (but not everything kids are still almost invisible while trooping :D), and a Deathstar Gunner doesn't see s**t
@MrBrainPlay3 жыл бұрын
for a Tipp you can make a Visor easy and low Budget with this foile. you just cut it in raf shape and laminated it (recommend 100+ Micron) so it is stiff and has no bubbles it is a way we teach our Recruits for ther Mandalorian Helmets
@tc.35133 жыл бұрын
What type of SLA 3d printer resin do u suggest buying? I ordered the helmet! Can't wait to get it from you.
@Kowalski28623 жыл бұрын
Hey what are your settings for your CR-10 V2 cause I got mine and I’m new to 3D printing.
@kainoctis77243 жыл бұрын
Defaults profiles are fine now, tweaking seams to sharpest corner smart hiding and max resolution(if youre getting zits) Most important thing is to make sure your frames square and belts are tightened properly. Dont trust the prebuilt sections either.
@Kowalski28623 жыл бұрын
@@kainoctis7724 thanks
@fakermakerprops39483 жыл бұрын
I'll have to use that dry brushing for my printed crossbones helmet!
@3DPrintFarm3 жыл бұрын
Nice job man!!
@Time-Shepherd.3 жыл бұрын
Fantastic work 🙂👍❤
@adventuroussloth49073 жыл бұрын
He maybe next you should do crosshair! I bought the kit, it’s awesome!
@abigailschulz84043 жыл бұрын
Amazing job!!!!! How long does it take to print Wrecker's helmet?
@Greydogtech3 жыл бұрын
Thanks for the video,I’m going to try to do this on my welding helmet so But I’m going to need fire resistant paint.
@idalwave64223 жыл бұрын
That looks cool
@avino57763 жыл бұрын
Once again you continue to surprise us with these great builds, thank you!
@karmajay13 жыл бұрын
Can you link the type of resin you used? Thanks!
@wh7why3903 жыл бұрын
Looks nice
@danielmalkowski78013 жыл бұрын
Could you elaborate more on how you installed the Window Tint? I am finishing up my wrecker helmet now and that is thae last thing I have to do.
@_crytacs44703 жыл бұрын
Nice Video. Can you do a clone commando helmet? That would be nice.
@johnmarkharris3 жыл бұрын
You consider a discount package of all 5 Bad Batch raw 3D printed helmets?
@hammerberg82919973 жыл бұрын
Plasti-dip is a pealable rubber spray. i use Rustoleum Leak Seal . its permanent and alot more robust
@Bushybrow0002 жыл бұрын
I love Wrecker!
@dkl15433 жыл бұрын
That is awesome!
@revilobeck94223 жыл бұрын
Could you please tell me what print settings you use? Mainly just infil if you would.
@dylanthomson64003 жыл бұрын
Great video and build as always! can you do clone commando Gregor build? I’d love to see that!
@CBrando893 жыл бұрын
For the resin that you painted onto the helmet for smoothness, was this a specific brand? Where could I find it online? I'm working on a Nite Owl helmet, and it would be nice to save my arms from having to sand so much with the other method (bondo spot putty and elbow grease).
@matttmp3 жыл бұрын
Forgive me if this is a stupid question but does the low heat resistance of PLA ever concern or bother you when making helmets or armor, like are you ever worried about anything possibly warping while wearing it or even hitting sunlight, or is it generally just not a real issue?
@jameswoodford2823 жыл бұрын
When you paint over it it fixes the problem.
@BigChedda67663 жыл бұрын
Awesome helmet! Are we ever gonna see a helmet collection video?
@yeudler413 жыл бұрын
You have the exact same music as Star Wars Meg in this video!
@lubovgeorgeable3 жыл бұрын
Does it matter what kind (brand)of resin you use on pla?
@iceduck60413 жыл бұрын
Cool helmet
@ZackMuffinMan3 жыл бұрын
Nice!
@xzile84923 жыл бұрын
Do you have a tips for getting lines straight and keeping paint from seeping under the tape
@galaxyace94923 жыл бұрын
Can u make Tech next?
@apollo_g34713 жыл бұрын
Wow i was just wondering when u would do this one
@henry_sjj65153 жыл бұрын
I really need you to make crosshairs helmet or echos helmet. I can’t decide witch one I like more!😂
@exmilkz26773 жыл бұрын
Hey just want to know when are you going to restock I understand you own a small Business but I really want a Commander bly helmet
@kraken20423 жыл бұрын
Im thinking about buying a 3d printer like the one you have do you or anyone else have any tips? I’m just looking for any sort of information I can have about them nothing specific
@sugma1383 жыл бұрын
when will you be selling the commander thorn helmet again?
@spontanawhite69653 жыл бұрын
Nice Job
@NerdRebelArt3 жыл бұрын
Nice job 👌 Will you make the armor for yourself?
@rexx25073 жыл бұрын
Sooo cool keep up the good work P. S could you do echo and tech 😁
@J0ermungand3 жыл бұрын
I'm curious, have you tried getting an optically clear resin print for those helmet eye slits yet?
@shockwave38383 жыл бұрын
Can you make a Clone Commando tutorial soon?
@sovan70503 жыл бұрын
can you pls make crosshairs helmet and I wanted to print it on the artillery genius which has the same bed size as the ender 3. is about 220x220x250
@nicholasdestefano24153 жыл бұрын
what do you think is the safest and best materiel for 3d printing
@edgarfigueroa88602 жыл бұрын
PLA is safe and most widely used
@nathandavern70303 жыл бұрын
That is so cool
@daltonhale86973 жыл бұрын
What kind of creality 3d printer is that?
@weirdbot18533 жыл бұрын
May I know the measurement of the circumference of your head? Im trying to know how to scale the Crosshair helmet to my head
@kainoctis77243 жыл бұрын
Youre better off slicing thin sections off the helmet in meshmixer, printing and sliding it over your head. Adjust scale % and try again. Dont raft it unless you have to, it uses very little filament. Around cheek parts from a glance.
@thepsychoseptic33733 жыл бұрын
Ive seen your stocks,Have any ideas for puttin some clone commandos one there? I wanted to make a custome trooper set who im calling "stitchup"
@rubenlanting58223 жыл бұрын
Really cool I love it 😍👍
@Mvkln3 жыл бұрын
Can you make a bad batch tech helmet?
@bootleg25433 жыл бұрын
I love the bad Batch My fav : tec
@patrickdennis32313 жыл бұрын
What filament do you use?
@Dcurry153 жыл бұрын
Just a question I'm new to the whole 3D printing thing, how much filament is used for a single helmet? And where is the best place to get filament from?
@HopesAndDreams963 жыл бұрын
I will usually go through about 1-1.5 roll of 1kg filament for a helmet. I use matterhackers pla the price and the quality are pretty good.
@kainoctis77243 жыл бұрын
@@HopesAndDreams96 How? I barely use a 7-800g for a full phase 2. What infil %? Are there supports going up the center to support dome top piece?
@geekygames66033 жыл бұрын
Plz do a crosshair helmet
@TheLaxTrojan3 жыл бұрын
Can you do a collection video of all your finished 3D printed props?
@exodus99413 жыл бұрын
I would buy that.
@cooopr6353 жыл бұрын
LETS GOOOOO IW AS WAITING FOR THIS
@TMANM3 жыл бұрын
amazing
@Tarnished-v3n3 жыл бұрын
Can some one help whith the prime its out of stock in Amazon, does some one got any other primer recommendations
@snarkbark27143 жыл бұрын
Are you using abs or pla
@TonyGuerrero-y4iАй бұрын
Can you make wrecker's armor?
@thegameplaywizard37673 жыл бұрын
what software do you use to model
@galaxysshadow2 жыл бұрын
Can you make a Commander Grey?
@L-O-C-03 жыл бұрын
How durable is the window tint
@sashali66663 жыл бұрын
Heck yeah
@thepineapple57443 жыл бұрын
can you do a file of Darth Vader custom I am trying to find a good one but there mainly action figure size
@studio47583 жыл бұрын
What should i do if my prints Come of my printbed
@Sir_Pie3 жыл бұрын
Does it fall off easily?
@bastiansachs10103 жыл бұрын
Can you make a old republic trooper armor please?
@michaelpolizzi81293 жыл бұрын
Can you link the resin in the description?
@GH0ST_763 жыл бұрын
Does anybody know how big the files are for the helmets and armor?
@grandmasterbroda14293 жыл бұрын
Do you know if you're ever gonna make Arc Trooper Jesse's helmet? I know I'd love to see that!
@nicholasdestefano24153 жыл бұрын
and which 3d printer do you recommend
@edgarfigueroa88602 жыл бұрын
For helmets the Creality CR10 v2, but for budget you could also use a Ender 3
@Challanger4633 жыл бұрын
Nice
@blueiron_yt3 жыл бұрын
Dude this looks so realistic. How are you so good😍
@tylerhoagland63523 жыл бұрын
He just is
@StyrofoamTumor3 жыл бұрын
Not surprised about the plastiDip peeling. One of the reasons why I switched from EVA foam...