c1500 obs chevy power windows and lock swap. with keyless entry

explain the parts needed and how to wire the factory windows and door locks on your obs silverado pick up

[@thatrebelboy48]

One thing you could do to help the windows roll up and down faster is running it to a relay

[@BuiltByMike]

I might try that

[@abrahambanuelos982]

The inside is beautiful mannn!!

[@BuiltByMike]

Thank you. Going to be doing a ne video soon of the completed truck

[@obs_vell439]

Im in GA. Plenty of junkyards, wish I found your vid i could've got you a harness. I plan to do the same thing but grabbed a harness from the junkyard. Crazy part was the dash was already off 🙌🏾 but nice obs!

[@FrankChevyGmc_from_BE]

Any idea where you can get a hand on these rubber grommets/ducts? I live in Europe and these trucks were never dealersold in my country, finding these on junkyards over here is virtually impossible. Cable harness is something I can fabricate myself, only having a hard time to find the connector that fits the window switch. Any help on that would be very much appreciated!

[@BuiltByMike]

Honestly you have to make the holes anyways. You can get them from any car and just make your holes accordingly. The window switch connector are why you need the door harness

[@charlesweber2560]

I’m doing a similar conversion from Manuel to power is there a part number for the power switch connector that holds the 5 pin switch connector for the switch?

[@BuiltByMike]

Your gonna have to find that at a junk yard.

[@GNaron]

Nice build!!! I bought a OBS brand new back in 1992 without power windows, door locks and cruz control. I didn't want pay a extra 2 grand for it. For $400 the wrecking yard sold me everything I needed hardware and all. But had to pull the parts myself. The truck looked like it was driven into a funnel at 100mph. I had to take driver side door panel to dry cleaners to get the stains out of it. I took the x-over harness out through the driver side speaker hole. I couldn't get the harness plugs past the brake pedal mount to get out thru the glove box. I cut the cab hole for the harness and boot without removing the doors using a angle grinder. It was a process!!! But my time wasn't worth much back then.

[@BuiltByMike]

Thank you

[@terrellwilliams3285]

What if ur door power now but someone selling a door dat roller up so can I just take all the stuff out my door n just put it on the roll up door

[@BuiltByMike]

Yes doors are the same

[@justarandomdude3102]

im buying a 1992 k2500, would it be possible for you to send me links for all the things you need for this?

[@BuiltByMike]

Look on lmc and buy everything from them. You just need to source the harness

[@justarandomdude3102]

@@BuiltByMike so the harness i can just get off any obs chevy with power windows?

[@BuiltByMike]

@@justarandomdude3102 as long as it's a pre93

[@steamy1k93]

What seats do you have in there?

[@BuiltByMike]

Lmc bench seat

[@thatrebelboy48]

@@BuiltByMikeis it comfortable?

[@collinwilliams5420]

What's that push start you have?

[@BuiltByMike]

It's off Amazon. Its not perfect but beats taking your keys out everytime.

[@collinwilliams5420]

@@BuiltByMike please link I've been looking, that thing is awesome

[@windhamjonathan]

How hard would this be to do on a 1996 model?

[@BuiltByMike]

It should be very similar