Cabrinha Tech Tip - Bladder repair

[@StevenMasur]

Most efficient delivery of all possible information about this topic I have seen. I literally have zero questions after watching this. Hopefully, this guy also likes fixing old Toyotas!

[@hughbosely8314]

One of the best how-to repair vids I've seen. Mucho mahalo Captain!

[@fredkitemuchmore7920]

Wow, Fantastic Video. I watched the Ozone manual, but this is far better!

[@biggeffory]

Great video! Really helped me do this on my switchblade for the first time. Thank you!

[@mm74forums7]

Mine 2 cents. Tie lines to ALL external parts - to upper and lower corner of the strut bladder, to sockets and valves. After repair, pull them back all together. This way you will minimize fishing of sockets and valves through small holes.

[@tomsteggles4489]

Well done. Thank you

[@bentonkareem]

Thanks for the detailed video!

[@MichelMebius]

Thaxxx realy helps me to get back on the water. Only thing is were you can order materials

[@dawidswin9202]

Great video, nice to watch 😉👍👍 Thank You.

[@sviriecat]

Great video, life saver!

[@fredrikbenjaminsson5227]

Great video! But how do i repair a small opening in the weld in the end of a blader?

[@egogrib]

Hello and thank you for your work! I have a question about the temperature of the water in a cup. Just a second after boiling? Around 100 degree? Thank you.

[@vinny61389]

Great tips!

[@ermanakbay]

How exactly does the valve "seat"? What kind of seating mechanism is inside the strut?

[@Johan_Pentrose]

Hi, great. videos. The new replacement strut bladders do not have the hole in the end to bring the end of the bladder all the way up into the corner mentioned at 3:35 . Otherwise, the end of the excess bladder is folded back from the valve…hope this condition doesn’t pop my bladder(s).

[@Johan_Pentrose]

Ok, my bad. I see where you say to tuck excess bladder inside the bladder under the valve. Thanks fir a most thorough video!

[@jamesmccay8918]

I am about to give this a go now, when I SHOULD be kiting instead 🙂 Here's the other he mentions: kzbin.info/www/bejne/jl6zc5p8eKujoqM Mahalo Cabrinha! It's been a great ride.

[@arielcor7392]

Hi. They are offering me a 2021 FX kite and I have doubts if these models have had problems with valve detachment because I have read something about it. Since it seems strange to me that there are 2021 models in stock.

[@lovetofly32]

I just bought a 2020 moto and it came with new bladders. I thought I would try and see if it held air that I would be fine but the second time I pumped it up it leaked down really fast, it seems one of the valves came loose because I can turn it now. I hope the new bladders are better. I have a 2019 slingshot that I've drove into the ground and on the water many times and it's unphased! That thing is tough!

[@konradbelej3408]

I have fx2021 and after one year using this kite, all valves just fall out month after month. So quality of this kite is below any expectations. They should change name from Cabrinha to Shitinha.

[@arielcor7392]

@@konradbelej3408 In the end I bought one and so far no problem. And others who also have a 2021 model with more use than mine have not had any problems either.

[@losl2]

Super!!!

[@fredrikbenjaminsson5227]

Great video! But how do i repair a small opening in the weld in the end of a blader?

[@mrdawsonh]

Fix-a-flat