Configuring Two Routers with Switch using CLI in Cisco Packet Tracer

[@Isaac_blingz]

Thanks alot, your teaching was so basic, step by step and easy to understand. Now i understand it very well. Thanks soo much

[@ludi4u]

best combo of a common entry level scenario combined with gentle and detailed voice support, thx heaps!

[@maneljulio]

Finally I could understand how to configure routers,switches and PCs. Brilliant video.

[@lornakoima2791]

Best video have seen so far after searching for hours. Many thanks. Greetings from Papua New Guinea

[@CodeShockDev]

Thank you!

[@thehiddencode5686]

This video is gold for those who are really into networking. Thanks for your time and effort to make this video.

[@mpumelelosicelomthethwa3468]

One of thee best tutorial videos I've seen on the net!!!

[@CodeShockDev]

Thank you so much!

[@sajithcosta3200]

thanks bro i have finished my networking exam watching your videos'.your videos use full to every one 😇

[@olusegunadewumi5989]

You are a champion. God used you to help me understand this well. God bless you

[@user-wm8yz]

I was working to connect two networks with two routers, I spent 3 days trying to figure our where is the problem, and finally I found out that one of the networks has no default gate way hhhhhhhhhh yeah I was so confident, I checked everything but not the default gateway as I was sure that it was configured hhhhhh thanks dude u saved me after all ...

[@asadbilal591]

Sir Lots of Love from Pakistan. Iv seen only one video of your's and you have proved in 14 mins that you really are brilliant teacher.

[@cephasekene7306]

Hi I enjoy ur video. I love the way you arrange your parameters it makes it easier to understand. I configure 3 network with 9 host,2 router and 2 switch and it worked. Thanks for the video

[@peterredgray2008]

Your awesome you've just helped me solve an assessment I have spent weeks trying to get working :)

[@tolgakuyucuk]

You have a great teaching ability. Thank you so much I learned that routing between 2 networks with using 2 router, thank you again

[@LetsBland9411]

This is the only video that makes sense in this topic

[@1minutelinux390]

The best explanation I've seen, nice work man

[@matejfons375]

Thank you, that helps me a lot, my teacher is a clever guy but he is explaining some new things too fast so i have to study at home

[@matejfons375]

Zac Smith later i will send you picture of my homework or something like that, so you can do it but dont have to, i will have test from configurating trought CLI so i have to be ready for that, i wanna work hard to learn some new things about networks and things around it, and thank you again :) and you have nice English so i can easily understand you

[@alexp374]

Thank you so much spent so much time trying to find out why mine wasnt working hadnt done the ip route part

[@zeref3636]

Omg this is what I've been looking for ! thanks man!

[@booteeantoniomark736]

great teaching... i want to learn more about configuring the network

[@ronmacauley7141]

Great tutorial. Very brilliant instructor.

[@mhassan9994]

10/10 very well explained. good on you

[@000GodRealm000]

Thank you Zac. been looking for several videos and this video answered my question.

[@matthewolowolagba6332]

best video ever clear and sharp

[@akampanamara5807]

Has been awesome for real

[@j.h.6672]

3:31 Do switches have IP addresses? Don't they act on the 2d OSI layer?

[@jannohoeven2318]

You saved me Ive had to make this for school, thank You mate

[@unknown___person]

Awesome explanation

[@TrixandTrix]

Great video, thank you for posting it has been a lot of help. Question: Do we not configure port ip addresses on the switches?

[@uahgraduate]

What is the additional steps u must take when there's a switchboard in between the two routers?

[@enydee]

Sir you're a genius

[@danielyarboi5326]

Like it's comprehensive nature

[@clasesutnfrc8699]

06:12 Configuration | Routers

[@vineeshpanangattkaravenugo4599]

Also those 2 routers are in 2 different places. so there is ISP ( internet service ) will come. So how we configure other network through Internet?

[@ArthurSilva-ro2hu]

you saved my life... thanks

[@Porodono]

Great video, thanks for the content!

[@justanotherusername2023]

i have a question please, dont we need to setup a Vlan address on the switches?

[@swapnesh9999]

Very helpful, ty. One question though, can we use RIP command instead of ip route here?

[@TechJedi007]

If i added another network via WAN, with IP 192.168.5.0/24 connecting to the 192.168.3.0/24 network.. I would use 192.168.4.0/30 in between correct? I'd like to know how the ip route configs would look like on each router so the local LAN can communicate with each other..

[@mohammadsaeed9635]

Best explanation 😍

[@johnwormall7718]

You are right Sam..You don't and can't give a layer 2 switch interface an IP address... You can assign an ip address to a Vlan but this is for management purposes.

[@kun4k167]

Thank you! Just what I needed!

[@ehabali21]

how do we configure the same network if we added a server?

[@KartikayKaul]

Such a sexy tutorial! (Pardon my way of description but that is how I describe something that I find indulging and inspiring) Your tutorial helped me learn so much!

[@mayssanamsi7385]

hi , thank you for this configuration .. but where is the configuration of switch .. you didn't make it ??

[@Dfath]

how do you add a firewall to this topology?

[@alandaniels2095]

Really grateful mate!

[@abdulrahmanalbouraee2413]

Thanks from KSA

[@debbierubble2434]

That was fantastic!

[@CaligosEve]

You sir have saved my bacon. Thank you! Brilliant video and explanations were on point - unlike top heavy theory on layers. o7 Much appreciated.

[@Street-VoiceAfrica]

thanks bro really helpful video

[@lookback6314]

Thanks a lot Teacher!

[@TheZakev]

Why Serial Ports? Aren't they outdated?

[@AbuIbrahim84]

Thank you Zac

[@ProGamerSadiq]

why can't i send to pcs in other networks

[@alaasallam713]

when I am trying to make ip route it gives me invalid next hop address (it's this router) . why does this appear?

[@NogCube]

You maybe set up IP address on interface serial 0/0/1 on the first router. But it is hard to say, I need to see full configuration.

[@gamehitzin115]

Great video thank you

[@siddharthtadury5612]

Hi sir when im using ip address of class A like-->(R1)10.0.1.0,(SW1)10.0.2.0,(R2)10.0.3.0,(SW2)10.0.4.0.then it is showing overlaying error,what does it mean?will you explain it please.?

[@aminedany8476]

@@CodeShockDev 255.0.0.0

[@sensaiz6879]

You saved our life

[@NogCube]

Great tutorial!!

[@CanisMajoris12]

How can i connect them to internet?

[@hibazafar3766]

the best tutorial! while i executed the command ip route ..it showed me Inconsistent address and mask why i am receiving this line????

[@asadbilal591]

you have done in correct subnetting...

[@rohanmathurful]

Helpful! Thanks.

[@sam-kw7up]

Why do we have ip address in switch?? Isn't it only data-link layer device? I am so confused..Helppp

[@johnwormall7718]

You are right Sam..You can't give a layer 2 switch interface an IP address its physically impossible... You can only assign an ip address to a Vlan but this is for management purposes only

[@buf4llo]

Why do the switch ports need IP adresses. Definately not needed. Switches use a mac table

[@idrisonimole2034]

Switches need IP addresses in cases where you need to ssh/telnet in , also when u have a managed switch and you need to log in and send SNMP traps.

[@idealpolytecnic7323]

good to see this

[@drl2141]

Thanks mate.

[@100waysofexcersies3]

why you not entered the DNS

[@durgeshsahu628]

why we need clock to connect two router

[@drkknght777]

Only on the Serial connections. One end is DCE and the other is DTE, normally, the clock rate provided by ISP, which would be the DCE end. Default is 64000. Which represents kb/s. The higher the better speed.

[@yuvrajnagpal2457]

Hlo can anyone tell me the purpose of using ip route as i am new to all this Thank you

[@onlyme5835]

really awesome tnx

[@omonginabram5591]

really awesome thaxz

[@MashaKayode]

fantastic

[@minhaz-ul-islamridoy3682]

Good one.

[@eakubislam4439]

Thanks.. Sir

[@sumanmahal1998]

Thanks

[@yakobfeleke2274]

Thank you

[@syedabubakar6858]

thank you sir

[@b.d.c1292]

thank you so much..

[@vineeshpanangattkaravenugo4599]

For switch why ip address? there is no Vlan

[@khmernetworkinglearning5621]

Nice

[@זאביגורוב]

Why the he'll he need 2 routers, you need only one

[@gayan4u]

grt (Y) (Y) (Y)

[@leoscorpio7094]

Thanks

[@mujahidulislam1277]

It's not connecting between two router though I've followed your video. Who i can check why it is not working?

[@mujahidulislam1277]

HOW*

[@farhanjmiahmed]

@@mujahidulislam1277 is it working now ??