Nice video. What if I was to go live using a smartphone, how do I connect it to the mixer
@apock88 Жыл бұрын
What is this? Casual Friday? Where's the KC jacket? 😂
@kettnercreative Жыл бұрын
Right? I figured 3 logos in the video was probably too much now that we have the boom arm. We'll see, the jacket might make a comeback.
@KM1980Music Жыл бұрын
And the buzz cut? Lol
@edgreene212 ай бұрын
I noticed the xlr connections to my speakers have different volume levels even when I set the speakers at the same volume. Have you had issues with one of the xlr outputs being less powerful than the other?
@radioforthebirds Жыл бұрын
Is it possible to output from the XLR and 1/4 inch stereo outputs at the same time to send out two copies of the stereo mix? For example, one to the audio interface, and the other to speakers.
@kettnercreative Жыл бұрын
Yes, you can do that.
@Itseightysix3 ай бұрын
For some odd reason , I’m getting no audio coming into my mixer , but my pc detects the mixer and even got levels coming into my pc , but no audio output ? I got the same trs balance connections
@awydot5Ай бұрын
Good day, I use a Professional Sound card and a Yamaha MG10X, I have tried to connect it for streaming on facebook and recording, but I have not been able to get the sound from the Mixer into the live stream and recording. I have tried using Vmix and Studio. I will really appreciate it if you can guide me through the connection. Thank you
@BhugzBarug Жыл бұрын
i just want to ask if tower speakers with 124watts are compatible to the yamaha mg 10xu?
@nornevclothing Жыл бұрын
Thank you!
@kettnercreative Жыл бұрын
You're welcome!
@srkchaxyАй бұрын
Can you show how to connect MG 10XU output to Sonos Arc Bar and speakers + woofer
@Hoomantavakoly6 ай бұрын
What if your PA system has only RCA input and you have to place it far . Can I run XLR from the mlxer to about 3 feet to the speaker then use an adaptor to convert XLR to RCA the rest of the way , which is about 3 ft? Is there a better way to make that work ?
@aliaydnaltunkan-motomottom5237 Жыл бұрын
Great video. thanks for everything :)
@BhugzBarug Жыл бұрын
thanks for sharing nice video
@cosmic.generator Жыл бұрын
Would I get better sound quality using this instead of a volt audio interface
@robsam Жыл бұрын
Can I connect my LG LHB725 5.1 home cinema to my Yamaha MG06X mixer? Pls explain what connectors will I need? Thanks in advance
@67cans2 Жыл бұрын
I have two self-powered speakers And One powered subwoofer. To set up ,will be for karaoke what would you recommend how to set it up.
@Swdp3132 Жыл бұрын
Nice video bro,, could you upload how to connect audio interface Steinberg UR12 + Yamaha Mgxu12 with yamaha monitor
@kettnercreative Жыл бұрын
Why connect the Steinberg? Seems un-necessary with the MG10XU
@JosephByrne Жыл бұрын
Can you guys set up a Tspring? The logo looks great.
@kettnercreative Жыл бұрын
We had one but never had a single sale in 2 years/9 million views so we took it down.
@ChaseMusic879 ай бұрын
Hi. How do i connect my mg12xu mixer to my audient id44 mk 2 for studio recording?
@emmanuelyambayamba8513 Жыл бұрын
hey kindly help my interface has a problem but i have a yamaha mg166cx mixer i believe i can use it to record music in the studio but how do i record audios with it ? i have a condenser microphone and headphones and studio monitors.whats the best connections i can do and the right settings? your help will be highly appreciated and keep on doing your videos they are really helpful
@KM1980Music Жыл бұрын
Is there any way to convert my TR speaker cables into TRS or XLR cables so I don’t have to rewire my whole setup?
@djdashkenya Жыл бұрын
Nice.Though I Still have a question.Would you mind showing how to connect the mixer to speakers if you have more than 2 speakers?For example,how do I run the mixer to 2 subs and 6 mid-range speakers?Thank you in advance
@alp6181 Жыл бұрын
You should use extra amplifier to power those speakers
@djdashkenya Жыл бұрын
@@alp6181 Understood
@alp6181 Жыл бұрын
@@djdashkenya 😂
@billdehey1300 Жыл бұрын
Where are you getting the music signal from . Music to mg10?
@patrick_jouno11 ай бұрын
What is the best Speakers to get for Karaoke Disco
@user-lj9iw5su8i Жыл бұрын
Sorry which way is better 1 - Yamaha MG10XU monitor out balanced 6.3 jack to XLR RCF AYRA PRO6 monitors or ? 2 - Yamaha MG10XU Stereo out XLR to XLR RCF ART 715 and after from ART 715 to AYRA PRO6 using XLR to XLR ? Kettner Creative Chanel please help me whit this 🙏
@neilpeel8048Ай бұрын
Instead of connecting 'powered speakers' could I use two guitar amplifiers (Clean/Line) with the MG10XU?
@jamesfilms_Ай бұрын
It’ll work, but guitar amps are built for guitar frequencies. They have quite narrow ranges and won’t sound good by comparison to proper speakers. There is also a risk of damaging the amp with base frequencies.
@neilpeel8048Ай бұрын
@@jamesfilms_ Good to know and thank you for the reply. I'm using them in a bedroom so the volume is quite low, just trying to utilize what I have instead of buying more gear.
@weekendchannel22 Жыл бұрын
Is there a provision to connect the snake cable?
@Reykjavic Жыл бұрын
Why my level meter not bouncing like that.
@LP00151987 Жыл бұрын
Hi kettner! is 5/6 channel can use both at the same time?
@kettnercreative Жыл бұрын
Yes you can!
@LP00151987 Жыл бұрын
@@kettnercreative Hello Kettner, i try using both channel 5 is 2 monojack for my DJ controller and 6 RCA for my mobile. if i try using same time it not working maybe next time can make a video also i really appreciate Thank you🌻
@CadePedersen Жыл бұрын
Couldnt you use rca to rca cable and go tape out of that board?
@kettnercreative Жыл бұрын
There isn’t a tape out on the current gen of this mixer. Only the MG102C had that.
@CadePedersen Жыл бұрын
@@kettnercreative ohhh. Gotcha. How far can you go with just regular rca cables
@kettnercreative Жыл бұрын
@@CadePedersen I wouldn’t go more than 10’
@cristiandiaz6333 Жыл бұрын
Do audio mixer work and sound better with powered speakers?
@kettnercreative Жыл бұрын
Powered speakers are better than passive speakers for a lot of reasons.
@cristiandiaz6333 Жыл бұрын
@@kettnercreative I heard that before. Can you explained your version as to why?
@kettnercreative Жыл бұрын
@@cristiandiaz6333 1) You have perfect compatibility for specs/wattage. Gone are the days of blown speakers or mismatched amps. 2) The shorter the distance is between the amp and speaker, the better the quality. 3) The whole package is covered by the same warranty. 4) No more loose connections between amp/speaker. 5) Smaller footprint/less outboard gear 6) Burnin/run time is identical for the speaker/amp
@cristiandiaz6333 Жыл бұрын
@@kettnercreative Thank you so much. Very nice of you to respond.
@Hammer01310 ай бұрын
Can I hook up a powered subwoofer?
@kettnercreative10 ай бұрын
Yes, you can.
@takeflightleakz84497 ай бұрын
@@kettnercreativehow can i do that ? i have as i have a speedwoofer 12S ,with this mixer
@rothsuede Жыл бұрын
Confusing video - the main outputs are for driving a stand alone amp - from there you go to your unpowered speakers - the monitor drive is to drive your powered speakers. keep it simple.