ctx3030 Vs deus 2 gold ring

[@grassholesmetaldetecting8471]

Gotta run the sensitivity high on any machine if you want to go deeper! Forget the numbers look for repeatable targets and sometimes if you’re in the woods or someplace that you can dig a big plug without worrying about making a mess you dig iffy signals that’s how you really learn your detector! Not on pre staged holes but I appreciate the effort you made making the video!

[@RealGrubert]

The CTX needs the soil to bring the signal up to teh coil. Many times I find a deep signal, then dig a plug and lose the signal. It still pinpoints, but the CTX will not detect down an empty hole very well.

[@Detectken]

You could also increase the “audio response” setting, on the Deus 2. It will make fainter sounds pop more.

[@kevsmith5363]

Thx Kenny all comments and advice are welcome

[@treasurehuntingscotlandmud9340]

great video

[@MaxVonStirliz]

Looks like one hell of a liberty caps location )

[@williamhill5933]

Shrooms

[@peterrobinson5438]

You should have used the fast program, pitch tone is the best on deus2

[@kevsmith5363]

ill give it a try and re scoot video with a gopro next time

[@jayathome3]

Lol ctx is go to machine, yet you didn't know how to get back to the detect screen🤣

[@petertadlock9336]

Tarsacci will hit it without any problems. The MDT technology works great on gold rings in almost any soil, including salt/alkali. IME Tarsacci is the deepest deepest IB detector available, especially for harsh ground conditions

[@Si_digs]

Must be why in the UK they don't trade anymore, 🤔

[@nicks3560]

You need the hole filled first otherwise the hole can give a false signal,for deep gold with the d2 try sensitive program. Sensitivity 98, reactivity 0.5, audio response 5 and keep everything else as the stock program and ground balance, it does help with deep targets to ground balance the d2. It's hard to give a program without knowing your ground but these settings run stable on my ground where there are not many signals.

[@kevsmith5363]

ill give it a go

[@XPDeus1.2]

Open hole ? Fabric settings..D2 can be much better

[@kevsmith5363]

any sugestions on setting welcome

[@XPDeus1.2]

@@kevsmith5363 i have many tests and settings on my ytb channel

[@Billsadventures13]

Fun test

[@patrickedgington6189]

Trun Audio response to 6 then check

[@janusstark4259]

You don't dig faint repeatable signals..🙄

[@testingmetaldetectorsXTRA]

Seriously ? You try all the possible settings on the D2 and make zero adjustments on the 3030. And then tell me please who detects with zero reactivity 😂 This test is just ridiculous. Learn how to use the 3030 first.

[@oldArmyVet]

Everyone has an excuse for the d2 lmao

[@georgeweiss2137]

Better then minelab.

[@oldArmyVet]

@@georgeweiss2137 how so???

[@georgeweiss2137]

@@oldArmyVet really.??

[@oldArmyVet]

@@georgeweiss2137 really, yes, just saying is better doesn't make it better.

[@scottsnyder8084]

You need to practice filming

[@kevsmith5363]

Yes I do and not use a phone that the storage. Runs out before I get to the best bits

[@markkus1134]

Turn down discrimination on Deus 2 I do not like the factory setting discrimination is too high

[@kevsmith5363]

Thx mark I'll give it a try and I right if you lower it then it will start to be a bit chirpy

[@JohnTaylor-cd3sb]

a nexus MP V3 would have blown your ears off at 12 inch

[@Tiimeh]

Youd lose your head at 1 inch