Bmw Vanos Fault Explained (3000€ parts replaced and still not fixed!)

In this video we Diagnose a Bmw Vanos Fault, and along the way i'll explain the system and tell you about the common failures
For Business inquiries contact; [e-mail] (not for technical questions)
For the Diagnosedan Tech Support Base (DDTSB) check out DDTSB.COM

[@giannisafaloniatis3747]

Since i bought a new oscilloscope and an incylinder pressure transducer , i hope to see some training videos from the best. Keep teaching us. Nice video .

[@Diagnosedan]

Congratulations with the 12 month subscribtion to DDTSB!

[@giannisafaloniatis3747]

@@Diagnosedan thank you

[@user-xp5yn7kh4w]

@@Diagnosedan Men. I am from Russia and I very wait your new episode. You there cool 👍 and "understand technical specialist

[@anthonyspeters7203]

I worked out from very beginning of your video, listening to engine running it was timing problem, thought @first may have been static timing set up incorrect so out of range of vanos,or seals gone! Stuart.

[@vagelakisseat3787]

Μπράβο Γιάννη, εάν επιτρέπεται, έχεις μαγαζί?

[@arga1966]

Love it when Dan says let's diagnose it together 🤣🤣🤣 Then does everything him self 😀😀

[@Diagnosedan]

😂😂😜

[@frankjohn4302]

That was a good one

[@wirooudejans4939]

I try to think to but never thought it had something to do with de connections.

[@djmech3871]

For the next Video we should all go to Dan’s shop so we can diagnose the problem together. Afterwards we’ll help Dan drink his Beer.🍻

[@brianburns7211]

Dan does take us by the hand and spoon feed every step of his diagnosis and repair.

[@jizwinkle9822]

Diagnose Dan is actually a genius. His videos are just so much better than anyone else.

[@Diagnosedan]

Wow thanks!

[@arga1966]

True mate his videos are miles ahead

[@remusracingro3884]

True

[@bugattibuilder]

Dan fixed my car, where no other shop wanted to even look at it...

[@user-fl2ug7sr3t]

@@bugattibuilder Nice dude. Yes he is a really good mechanic. His shop is in Amsterdam right?

[@tonybone40]

It's just astonishing to think BMW used identical connectors so close together with just a tiny difference in trace colours I can't blame the other workshop for missing this but once again Dan's diagnosis found the problem which is just amazing this is the only diagnosis channel I watch because its head and shoulders above the rest excellent work Dan keep up the great work

[@bobl78]

yes really stupid design..

[@Diagnosedan]

Thanks for the great comment it's appriciated!!

[@Romif_SK]

@@bobl78 it's on purpose. Don't mess with it if you don't know what are you doing. It reminds me of connectors for park assist control unit and for headlight position control unit. Those connectors are same on Peugeot 208. If you switch them the car won't work at all.

[@Stoney3K]

The same deal with the splines that engage with the camshafts on each end, they could have easily put a mirrored notch on each of the wheels so they would never be interchangeable in the first place.

[@TheMidnightNarwhal]

I mean ya gotta be pretty fucking incompetent to mix these up. Everytime you remove connectors, you mark them or you trace them. Even the BMW workshop manuals tells you which one goes where. Again, this is just pure incompetence. I'm a DIYer with no mechanical professional background and cmon even I don't fuck up like this. EDIT: After reading the comments, I concur it is stupid. It's easy to make it fit one spot when it's not. It's just at the same time, I feel like it's also stupid to mix them up but yeah... I guess that's the point of good design. Prevent mistakes like these ha

[@richard1835]

Never seen the VANOS system explained like this. Great presentation. The problem I have seen with these oil pressure control systems is the customers lack of maintenance which cause sludge and oil deposits to block oil passages. This goes for the modern timing chain systems as well. Thank you DiagnoseDan

[@Diagnosedan]

Thanks for taking the time to leave a comment Richard it's appriciated 👍

[@tonygovender3805]

Thanks Dan, I worked for bmw dealerships for 6years and I have seen even bmw mechanics who still don't understand their products. Your are a blessing to the world of vehicle diagnostics.

[@Diagnosedan]

Thank you very much 💪

[@nomayor1]

In the minds of technicians who work in dealerships, it's not "their products". Those technicians are 9-5 employees. The only thing they care is when are they going home. It is owner-based shops like Dan, who really care to *Understand* and diagnose the problem, both quickly but more importantly, correctly. The issue is, where can you find such shops, at least here in the UK.

[@michealfisher3879]

Aaaaa

[@guitarsender]

Today while driving home from work I suddenly realised that I haven’t seen Dan uploading new videos for a while now. And here it is, I kid you not!

[@Diagnosedan]

Telepathic?😜

[@guitarsender]

@@Diagnosedan 100%

[@bobsmockus]

I've had 4 BMWs over the past 13 years and this is the only true VANOS explanation I've ever seen! Awesome video!

[@paulrobinson3528]

14:16 The moment you pointed to those Vanos wires and plugs, i thought "i bet you can swop them a round, the plugs are the same" and my god i was right. I know this because i did a similar thing on a Rover VVC engine once but it was with wires swopped between the vvc unit and something on the inlet manifold. That also ran like a bag of bolts but i knew what i had done straight away because i was very use to working on them lol. Can't believe BMW has done such a stupid thing by having the same plugs. Well worked out, all the beers on them lol

[@Diagnosedan]

Thanks for the comment it's appriciated Paul!

[@paulrobinson3528]

@@Diagnosedan No worries, love your approach to faults.................and the equipment/yools you use.

[@mememaster147]

bodgit and leggit (Irish mechanic tuber) had a similar job. A diesel car (Astra, I think) had the engine replaced and wouldn't start, been through 2 garages with no fix. The garage that did the swap numbered the plugs for the injectors and they were connected up in numerical order. However, somebody had forgotten which direction they'd numbered the plugs in...

[@alanpartridge2140]

I'd expect it for a Rover but for a newish BMW it's beyond belief that their engineers are so sloppy when it is very easy to design against such mishaps as is done for most other modern cars

[@paulrobinson3528]

@@alanpartridge2140 BMW aint all they're cracked up to be

[@ricky613]

Man made problems can be the hardest to diagnose. Great video Dan.

[@Diagnosedan]

That's right!

[@obsoleteprofessor2034]

One would wonder why they didn't use different connectors to avoid such a problem. Maybe cost considerations.

[@tituskoreman1565]

@@obsoleteprofessor2034 i've seen a lot of this kind of mistakes in motorbikes, motorbikes often use the same connectors for different components also!

[@kevinbarry71]

Parts canon got a lot of use on that one

[@Diagnosedan]

That's right! Lot's of parts replaced that didn't fix the Car😬

[@brianburns7211]

If I owned the car I would not be pleased!

[@delberttannen3403]

It's nearly always a simple fix, but there's often very little appreciation for the skills required to find it. A great video as always, thanks Dan

[@Diagnosedan]

Thank you very much

[@bullvine2062]

I don't know of any other mechanic that's so thorough and skilled as Dan. Awesome

[@Diagnosedan]

Thank you!

[@igotaction]

YES!!!! The man returns!!! Nobody does better diagnostic videos than you Dan!!

[@Diagnosedan]

You make me blush😜

[@MC-Racing]

Im not trying to take anything away from Dan, he is very competent and likable, but take a look at south main auto channel. Eric O is very good aswell :-)

[@igotaction]

@@MC-Racing I'm good I'll stay right here😉 nothing against anyone else

[@AhmedAbdo-tx1rn]

مشكوووووووووووووور

[@UndercoverFerret404]

Today was a good day, Dan uploaded a new video. I can sleep good tonight, knowing another car lives another day.

[@Diagnosedan]

That's a Nice comment thanks, it's appriciated

[@Indranxxi]

Attention to work can prevent this kind of problem. You are the best 👍

[@Diagnosedan]

Thank you very much

[@robhughes8516]

I would volunteer to work with/for Dan just to learn. Truly a master in his field.

[@Diagnosedan]

Thanks Rob

[@_Marius_Strolys]

Unbelievable, I would even say - a cruel mistake. Thank you Dan.

[@Diagnosedan]

Thanks for watching Marius!

[@DLWELD]

BMW's are full of "Easter Eggs"!

[@hamadyousef8728]

Two idiots with 2 dislike ... Whyyyyyyy ... This man is a master piece 😍😍 and we love him.

[@Diagnosedan]

Thank you very much

[@AutoDITEX]

Finally! It was about time for you to create this video, where we all see you again in your typical and best role.

[@Diagnosedan]

Thanks for watching and taking the time to leave a comment! It's appriciated!

[@thebaldmechanichardatheari1124]

So simple but so difficult. You very good at explaining systems. Years ago had no start on a mustang and wires were crossed, bloody connectors should be all different. Good work.

[@Diagnosedan]

I diagnosed a Mercedes once. The airbag went off after the Car was unlocked with the remote. It was in a bodyshop that Just repaired the front bumper. It turned out that the connector for the front foglights (in the bumper) and the front crash sensor (under the headlight) are exactly the same. After unlocking the Car the lights of the car came on and triggered the airbags to deploy. €4000 damage😬

[@thmawhirt]

Well Dan, no matter how much beer you drink your hangover will be cured long before the other garage's hangover is after that mistake!

[@Diagnosedan]

😂😂Let's drink "Together"

[@micaht7768]

Your vvt explanation reminded me of the one you did on high pressure fuel pumps. They are both excellent.

[@Diagnosedan]

Thank you! It's great to hear you liked the video

[@noelconnor8539]

Brilliant Diagnostic technician 10 star work ethics

[@caracasteca]

it was about time for You to upload a video - You know we need You - thanks

[@Diagnosedan]

Thanks for the Nice comment!

[@VAGCOMM]

Hi Dan,long time no see. But glad to see You again. Let's see, how Diagnose Dan Fix It Again!🙂

[@Diagnosedan]

Thanks for leaving a comment!

[@chuckyboy6977]

I’m one of those who’s mechanical knowledge started with being told to stand and watch your dad fixing the family car on the drive. Dan’s educational style is a great way to learn without knowing your learning new things. Once more the KZbin algorithm has shown me a diamonds in the rough. Hopefully Dan and the channel goes on from strength to strength. Excellent channel.

[@David-rk2cw]

Wow all those parts thrown at the car only to find out that they mixed up the connectors? But this guy just made the diagnosis seem so easy I also learned some thing about the pressure wave form I would have never know that the little exhaust spike would indicate a timing problem.

[@warrenrogers2461]

Awesome...just goes to shows how important it is to cross check and double check your work. Well done Dan.

[@Diagnosedan]

Everybody makes mistakes, i've made quite a few myself. The most important thing is that we correct them before the Car is returned to the customer!

[@wetleyrocks3092]

One of the best episodes, especially the tips at the end re oil pressure. Thanks Dan!

[@Diagnosedan]

Thanks!

[@johnplump3760]

When testing either a car or a computer, never, never ignore a small item that could be the problem. Dan saw the little hump in the wave forms that is very easily overlooked. Great job Dan!

[@mohammadbenattia9102]

one of the best simplified explanations of VANOS theory of operation on the tube, thank you so much, great channel, great character, cheers

[@Diagnosedan]

Thanks!

[@bobdylan6237]

This is a man at the very top of the game.

[@Diagnosedan]

Thanks Bob

[@partsshooter]

I know the original mechanics are gonna have that "dead inside" kinda feeling once they found out the answer.. Gosh, I feel bad for them, When we overlook something so simple! It's a costly mistake we all... Have made. Lesson learned

[@Diagnosedan]

Yes, but he was also very glad the Car was fixed without the need for more parts

[@AMGswede]

Agree, but huge shame on the BMW engineers who decided to put two similar type of connectors at such a place. Of course, as long as the cable with this connector can reach both sockets, it must be irreplaceable - absolutely not what I expect from a BMW engineer. @@Diagnosedan

[@kain0m]

@@AMGswede likely, the solenoid is the same for both Intake and exhaust. So keying the connectors would increase the number of unique parts, increasing cost and likelyhood of "out of stock". Of course, some Poka yoke would be nice, but not at all costs.

[@AMGswede]

Point taken - cost is of great importance. But then BMW could have color coded the connector on the wiring harness.

[@dealerauctionnightmare4689]

@@kain0m kinda agree with this but, a well-versed mechanic would have known they were the same connector and marked which one they went to.

[@georgel943]

I owe you a lot of beer too Dan. God bless you for making this video! Made same mistake. Only cost me 400 for new solenoids.

[@janmartens7954]

The great masters always explain thing easy, when it looks very very complicaties for others

[@Diagnosedan]

Thanks for the comment Jan

[@adammcallister2260]

Great job. Proof that knowledge is key! Wish I was near you to have my own car diagnosed. Missed this channel, can’t wait for more content!

[@Diagnosedan]

Thanks Adam

[@mmichaeldonavon]

Dan. This video was nothing but SUPERB! Your explanations were truly clear and concise. Your "explanations and demonstrations, using the actual parts, was a College Level presentation. You are, without a doubt, Dan - "THE MAN" Many thanks. I've been a subscriber and you never fail to teach us something. Thank you, Sir.

[@Mrdubomb]

Ran into this exact same situation today, I remember watching this video years ago-so glad I did. Dan-you the man!

[@beluxauto5968]

you explained it in great detail . In 30 years of being a diagnostician / mechanic I really have seen all the problems with the VANOS , even the one you just fixed . Stupid as it may sound , a paint marker is one of my best friends . Easy for me to say after the facts ? No , I live in a country of DIYers .

[@Diagnosedan]

If you look closely at the video you can see that they actually marked one of the connectors with white paint

[@beluxauto5968]

Didn't see that. Djeez , they must have gotten frustrated and missed that . I have eaten a lot of hours in my life but this one must hurt. Hopefully the garage and the client settle things in a human way.

[@APSuk2]

Great to have you back Dan, you have been missed! Amazing video as always, looks like they had marked up one of the VANOS solenoids and its connector with a white paint/marker so they did not get them mixed up. I think we have all been there at some point but that is one expensive connector swap. Thank again for these excellent videos!

[@Diagnosedan]

Yes he told me he did Mark them with White Paint😅

[@trevormansfield6495]

This is one of the best videos ive seen on youtube. I learnt a few things . Thanks. More please!!!

[@Diagnosedan]

That's awsome! Thanks

[@dementisband]

Ive always known what VANOS does and the basic concept of how it works but this is next level knowledge.

[@ralphbabusci2666]

just found your channel and love it! I am a long time BMW owner and you have by far the best explanations of cause and effect I have seen. Great stuff and hoping to learn more from you!

[@jaykent6645]

Dan, what can we say your a genius, it makes my day when i see a new DD video, thank you so much for taking the time in bringing these great videos to us all. Kindest regards Jay

[@Diagnosedan]

Thanks Jay

[@kennedysgarage3281]

Dan , that is a fantastically informative video. I haven’t yet signed up to DDTSB but you just made me feel I need it in my workshop. The smaller the issue the harder it is to find, so very well copped 👍 & thanks for doing all your vids

[@Diagnosedan]

You won't regret Subscribing to DDTSB. It will safe you time, money and frustration 😜

[@kennedysgarage3281]

@@Diagnosedan I have done. Thanks for the reply Dan 👍

[@andrew_4769]

when i watch your videos i take notes like am going to school!!!

[@Diagnosedan]

🤣 Thanks for watching Andrew

[@ViniciusVetor]

I'm not even close to try to fix an BMW engine but I'm amazed by the explanation, demonstration and methodology to track and fix the problem. Congrats!

[@davidharris5736]

Brought a smile to my face. Connectors reversed et Voila! Genius! Thanks for the variable valve timing and oil filter info simple if you KNOW. Well done Dan! What would a different colour socket have cost BMW or do they want to make it difficult so you have to go to BMW main dealers?

[@GNX157]

No way Dan, I’m just not believing this. There’s about a dozen BMW engineers who should be fired for this. No way should it of been designed for this error to happen so easily. Those wire looms should be tagged or labeled. The connectors themselves should not be interchangeable, the connector colors should be different. Take your pick but I lay this fault squarely on BMW’s shoulders first.

[@Diagnosedan]

There were some guides and sleeves missing that would have made this mistake nearly impossible

[@daysofgrace2934]

But it's this kind of knowledge that will allow you to get paid a higher rate. Otherwise, anybody would be able to fix it...

[@aeroearth]

A basic tenet of design which the Japanese call "poka yoke" is that it should not be possible to assemble such parts incorrectly. So the electrical plugs to the solenoids should have been physically different and the machining of inlet and exhaust vanos units and camshafts physically different so impossible to inadvertently swap them over. Same principle to be used for fitting the cam assemblies to the engine and indeed for the WHOLE CAR.

[@stevesaunders7810]

The Vanos units at the cams I get. It's bad engineering, and they should be keyed. But NOT the solenoids. They are the same part number x 2. Just don't stuff up the connections. If they were two separate parts then BMW would need to manufacture two different parts for the 'same' job, and have to charge more for them. That would result in increased manufacturing cost, warehousing cost, etc, etc., right on down the supply chain. Sure, design better connector reach/placement, but they did. Like Dan said, there are guides and sleeves missing...

[@SamVieiraGuitar]

Dan is the man, he not only fixed it but gave us a huge lesson on how vanos work. The best on youtube!

[@Joe-kj8bw]

Dan, you are just amazing. Not only as a technician but your ability to explain everything is just genius. I am so grateful for what you do.

[@miguelrodriguez1214]

I second that statement!

[@boyka9115]

Enough explanation and great effort, Professor Dan .. I hope to learn more from you, thank you very much 💪🏼😍

[@Diagnosedan]

Thanks for watching

[@RideBikes_Walkplaces]

Perfect timing for my dinner! Hi dan, love your channel.

[@Diagnosedan]

Bon appetit!😜

[@RNB102]

The way you explain everything showing examples sets you above many others. Brilliant step by step diagnosis and a no nonsense approach with intelligence and creativity! Love your videos Dan. Kind regards.

[@mandlasimamane]

Hi Dan, since i joined your Facebook page and KZbin channel every episode i grow more confident in starting my project car. You are the real deal in problem solving and analytical thinking. Thank you.

[@DTEAuto]

Thanks for sharing another great diag video, and thank you for always taking the time to break things down for clearer explanations. Just out of curiosity, were there any other tests done prior to incylinder testing that lead you to it? It sure was a great way to tell for sure the timing change before and after. Again, thanks for sharing!

[@Diagnosedan]

No other test done, Just the ones showed in the video, i don't know what test were done by the previous shop

[@DeepakKumar-lv4te]

@@Diagnosedan Hi Dan, sorry i'm so late to this, was the red tracer wire the hot / exhaust side and the blue tracer wire the cold/inlet side solenoid ? Just wondered. Thanks for the amazingly informative video.

[@BirdogEd]

Yeah, on my M52tu, I mark the connections with different paint pens to keep the connectors on the right connectors, as I have crossed them before!😂 😎🇺🇸

[@Diagnosedan]

If you look closely you'll see they actually marked one of the connectors with White Paint 🤣

[@Kamal_Kalyan887]

Dan please keep doing these kind of videos. Never stop uploading 🙏🏻

[@Diagnosedan]

Thanks for the comment

[@KarelBeelaertsvanBlokland]

BRAVO - Had VANOS fear buying second hand - But with your clear explanation, you cured my illness!

[@stephschackarnhau9370]

Really like your videos.. They are very educational.. 😊👌 Kind regards from Denmark 🇩🇰

[@Diagnosedan]

Thanks! I hope to visit Denmark soon!

[@niceviewoverthere4463]

Very informative - as always. Tks.

[@Diagnosedan]

Thanks for watching

[@petercross7183]

A High Quality BMW Diagnosis Video…. Highly Recommended !

[@DjNikGnashers]

Really enjoyed this video mate, I work in the parts department of a dealership, and watching diagnosis videos like this, really helps me to understand the various parts better.

[@Diagnosedan]

That's great Nik!

[@paulrobinson3528]

Reminds me of my teacher, Phil Malpass at mechanics college. His version was suck,squeeze,bang,blow. At 16 thats all you wanted to do lol. i'm 51 now and its still all i want, i love suck, squeeze, bang,blow lol

[@Diagnosedan]

😂😂

[@markobezjak6952]

🤣😂🤣😂👍

[@domualex]

Ohh...DD brilliant again....

[@domualex]

This is the DD i like

[@Diagnosedan]

Thanks Alexandru😁

[@mrdomhare]

Really enjoy your videos being a mechanic myself. Quality is the first word that comes to mind

[@jairocalderon3286]

Definitely is a genius, I follow him for years already and every single video he does is a master piece!!!

[@Diagnosedan]

Thank you Jairo but i'm just doing my job

[@jairocalderon3286]

@@Diagnosedan thanks for share Your knowledge

[@bulwinkle]

I have an old electo-mechanical brain, sometimes a solenoid sticks and a quick thump on the side of my head gets it going again.

[@Diagnosedan]

🤣🤣👍

[@Stoney3K]

And when it doesn't and remains loose when you don't want it, your thoughts keep going on like a pinball machine!

[@bulwinkle]

@@Stoney3K yes, thats the way it goes.

[@emadtaha6109]

where have you been? I have been wondering for a while? we need a video once a week Dan. Take care

[@Diagnosedan]

Thanks for watching 👍

[@torresaurus_]

Thanks a whole lot for this video. This content is extremely hard to find. I have been trying to wrap my head around how the VANOS system on my N54 works for a little over a year and this video has given me more than what I've collectedly gathered since.

[@abdulaiabdurahmani2913]

asalamaleikum ! greetings from Kosova. Your videos helped me to retsore my BMW X6 to it's perfection. I love my car. Kosovo forever.

[@miguelrodriguez1214]

Asalamaleikum from Mexico!

[@anthonyxuereb792]

Poor design when parts can be interchanged to the detriment of the engine eg the Vanos drive units and the wiring connectors and there may be many more. Thank God for electric motors I say because we all can't have a miracle worker like Dan at our disposal.

[@Diagnosedan]

Thanks for watching!

[@anthonyxuereb792]

@@Diagnosedan the thanks is all ours, thanks for posting the videos, thanks for your perseverance, thanks for your skill sharing and thanks for sharing your experience and knowledge to help others.

[@malchone1]

Well that's why when you are mechanic and charge people money for jobs, you have to know what are you doing so same connectors should not be a problem

[@anthonyxuereb792]

@@malchone1 all mechanics aren't equal and how many competent mechanics have been caught out because they simply didn't know? Your comments are no excuse for poor design, quality starts on the drawing board, at the beginning and should not depend on the mechanic, the end user. Sorry to disagree

[@malchone1]

@@anthonyxuereb792 Don't get me wrong I know that car manufacturers do make mistake when design cars but to blame them for incompetent mechanics it is wrong.Good mechanics use tools and common sense to figure out problem.Spraying parts on car,charge costumer,then tell them"I don't know what is wrong with it"is not ok.In the end car are just machines and with thorough approach can be fixed.Cheers

[@arcadeuk]

I wonder how much the customer has to pay, for all the parts they didn't need 🤦‍♂️

[@Diagnosedan]

The workshop that worked on the Car is also the owner they tried to fix the Car and re-sell it

[@tomhoehler3284]

@@Diagnosedan Whoa!! I'll bet this goof will make them double and triple check their work from now on!! At least some customer didn't get taken advantage of.

[@Conservator.]

@@Diagnosedan Good to hear that the shop owned the car (and will therefore take the costS themselves). I do understand that this was very tricky but I don’t understand why people would just replace (expensive) parts without knowing if they are faulty or not. Thanks for your excellent explanations!

[@alexanderSydneyOz]

@@Conservator. Quite agree. It is doubly hard to understand replacing the camshaft and its housing. How could that have helped in any credible circumstance?

[@Conservator.]

@@alexanderSydneyOz Exactly. I wouldn’t want someone who thinks (or doesn’t think;) like that even touch my car.

[@bewareofmountainlions4429]

Its happens to everybody at least once. Something doesn't get plugged back in or gets plugged into the wrong spot, but its embarrassing every time. Great video.

[@Diagnosedan]

Thanks for watching

[@ChrisKsan]

Anal level of detail oriented technician. Subscribed!

[@mph5896]

Yikes. That would be an easy mixup, the connectors are interchangeable.

[@Diagnosedan]

Thanks for watching

[@larryskeeper1197]

You would think they would differentiate the connectors for the solenoids. Tag the harness, colour code or the like. Seen it happen on cam timing sensors on DDC Engines....Good pickup there Dan.

[@Stoney3K]

@@larryskeeper1197 I agree, I mean, even something as simple as a red and blue marker on each of the connectors and the solenoids would have done the trick. But then again, you can also swap the solenoids around as they look identical.

[@renotsttam]

@@Stoney3K the solenoids that extend through the opening on the front of the cylinder head are identical, same part number for both cams, it’s the VANOS sprockets that are unique to each side.

[@wjb2]

brilliant brilliant

[@Diagnosedan]

Thanks Bill

[@martinmller3593]

Great diagnose. One of my favorites! I think we all can relate to a stressful day where a mistake was made, but changing parts without measuring can easy go bad😇

[@Diagnosedan]

Ha you finally found the time to watch!😜 Thanks for watching it's appriciated Martin💪

[@sisusdk]

You are gonna be the ONLY car mechanic in the world. You are the only one who acctualy fixes cars. If the carmechanic is not you, then he is worthless... Love you fixes.

[@Diagnosedan]

Thank you very much

[@billytremoloband7456]

It’s definitely the small things that can catch you by the 🏀🏐🎾⚽️⚾️🥎

[@Diagnosedan]

🤣🤣

[@MattyEngland]

How stupid of BMW to fit 2 identical plugs that can be so easily mixed up. 🙄

[@mattt4183]

How stupid of the "tech" not to label them.

[@MattyEngland]

@@mattt4183 yeah that too.

[@jix177]

It's relatively uncommon to see identical plugs close to each other. How often do you see anyone spending time labelling every plug they remove?

[@mattt4183]

@@jix177 There's no need to label every plug. Just the ones like this that can be easily switched. It's less than a minute with a two dollar paint pen vs. three grand in parts and who knows how many hours labor............

[@Diagnosedan]

There were some guides and sleeves missing that would make this mistake nearly impossible. If you look closely you',ll see the even marked the connector with white Paint

[@MarioDallaRiva]

Fantastic content! As a N52 and N20 owner this is excellent information.

[@Diagnosedan]

You are welcome 😁

[@alphatac7168]

The second he started that engine, I knew it! It was a vacuum leak🙂🙂 Awesome video Dan!

[@Diagnosedan]

🤣🤣

[@stevewarren3051]

I see why you don't do many vids. It takes too long to edit out the bloopers.

[@Diagnosedan]

Yes i struggle with my English alot🤣

[@mzee5533]

When Scotty Kilmer was saying German machines are too much engineered and endless money pit he meant this

[@Diagnosedan]

Has nothing to do with the Car, it was a mistake from the mechanic

[@abdulh9687]

Great video Dan! Thank you for having my back in the workshop, I learn a lot from DDTSB.

[@Diagnosedan]

That's great to hear!

[@valeriivanov2015]

One of the best videos I've ever seen! A happy life awaits the cars that meet you! Thanks Dan! Keep up the great next level work. Cheers!

[@gutsngorrrr]

My question is, does the customer pay for all those unnecessary parts and extra time spent on sorting this mistake?

[@Diagnosedan]

That shop bought this car to resell it,so they are paying for it themselves.

[@philb1639]

After watching this vid. It seems that BMW overengineer everything on their cars, unless the car is in warranty i would never think about buying one, ever!

[@Diagnosedan]

Thanks for watching

[@alanpartridge2140]

Overengineered? This is really piss poor sloppy engineering, it's easy to get the connectors so they can't be swapped

[@oskanguluwe9414]

It felt like an eternity waiting for one of your videos and i must say,it was worth the wait.thank you!

[@Diagnosedan]

Thanks!👍

[@VNEMUS]

I have also made that mistake of incorrectly switching the vanos intake and exhaust solenoid connectors after removal, cleaning and reinstallation. This lead me to pre-maturely replacing both solenoids, both camshaft position sensors and both vanos check valves only to realize later the solenoid connectors were opposite. I put both the old solenoids and camshaft position sensors back in and realized the actual problem was only a faulty intake camshaft position sensor. Anyway, very good video with explanation of how the vanos works, view of the all the parts and tools used to diagnosis vanos problems. Also good reminder to not throw parts at a problem. Thank you!

[@csours]

The most literal instance of Murphy's Law! If anything can go wrong, it will. Those connectors need to be keyed.

[@Diagnosedan]

Thanks for watching Cameron

[@dealerauctionnightmare4689]

marking them would have worked....🤷‍♂️🤷‍♂️🤷‍♂️

[@SerbanCMusca-ut8ny]

Dan, you are the man! That (simplified) waveform analysis sure was part of the 'goodies' you spinkle your vidjayos with. Very interesting stuff, thank you for sharing. Take care.

[@Diagnosedan]

Glad you liked the video!

[@eacherenkeka]

Great video and thank you for explaining how the VANOS work! I swapped connectors in a Sentra AF sensors and and drove me crazy! I am sorry for them because it is hard to find our own mistakes!

[@Diagnosedan]

🤣🤣Thanks for watching

[@j81851]

Love the bloopers as much as the video. Any man that can laugh at himself is a great person! Bravo Dan!

[@Diagnosedan]

Thanks John

[@mikechiodetti4482]

I don't know anything about European vehicles, so what I see you do for diagnose/repair is a total learning curve. Thank you. Great catch with this vehicle's problem! Also I don't know why Domestic (U.S.) and Asian call it Variable Valve Timing when CLEARLY, Europeans call it Variable Cam Timing which is correct! My 06 Nissan Frontier 4.0L V6 has Variable Cam Timing on the Intake Cams only, but they're NOT Variable Valve Timing! The whole cam timing moves, NOT individual valve timing.

[@Diagnosedan]

Thanks for watching Mike!

[@charlesseymour1482]

You are a genius with the goal of root cause before repair! Good job.

[@anthonyacton2969]

OMG wish I hqad found you 2 years agO !!!! BMW for me = Break My Wallet until I found you. Many thanks keep up the good work

[@mixedboi]

Wow, I'm very impressed. Great work. That is a very simple fix, but the journey to that fix is full of knowledge.