DIY Table Saw Folding Outfeed Table with built-in CrossCut Sled - Pt. 4

[@Paoson_Woodworking]

Outfeed Table & Crosscut Sled Plans: bit.ly/44kHDvf

[@danread3144]

Hi, if i buy the plans for the full DIY Table saw table and then you add more to it at a later date such as sliding carriage will this then become available as part of the full set? Im also debating what materials to use, i notice you used mdf for the tops but i though that wasnt as stable as ply and ply was the best material to use? I cant realy afford the birch plywood its rediculously expensive would ordinary WBP hardwood plywood from the builders merchants in the uk be ok with melamine mdf for the tops?

[@mysterMM]

@@danread3144 Look like he is selling every each part of the table separately.

[@maffel9397]

Hi @Paoson_Woodworking, do you (or anyone else) have any recommendations for a compact dust extractor for a small 11ft x 7ft workshop? Thanks!

[@barry.w.christie]

The sheer quality of your craftsmanship just takes these pieces to another level, not forgetting to mention the functionality each piece provides ... just superb 👍 I don't know about anyone else, but I'd love a video on how you work, showing how you move from a basic idea to the finished article ... it's how you seem to think of everything which I'm especially interested in 😁

[@nholly86]

I’ve always been a fan of your channel, but thought some of your projects were beyond my skill range. This build strikes an amazing balance between functionality and the ability of a weekend wood worker to build it.

[@LumberBrax]

This entire work bench is brilliant. I’m looking forward to building my own, with a few modifications to accommodate my table saw. Fantastic ingenuity, and incredibly well executed, as well as approachable.

[@Paoson_Woodworking]

thanks!

[@DeltronZero656]

@paoson_woodworking can I ask you a question about the design though? Something I didn't understand was when you said you would only have to level the feet one time. Isn't that only true if the saw is either used in the same spot or if the floor is exactly level every time the saw is used?

[@someguynj]

OMG this just put it over the top as the thing I absolutely must build for my hybrid garage/workshop. Only problem is, the tools you build are all far nicer than anything I've ever actually built myself! Guess I'll have to challenge myself. I wish baltic birch wasn't so expensive too.

[@Benmeglei1]

Don’t even get me started on BB. It’s 285 a sheet 5x5 by me in Chicago.

[@Weshopwizard]

@@Benmeglei1oh my god!!!!!

[@applicitaaccount1258]

I wish I could purchase this as a flatpack kit to save some time :-) Great design!

[@joanfarrell8592]

Excellent presentation and craftsmanship! Clean. Straight forward. Thank you! Thank you very much!

[@fransvanderwerf7485]

this is a fantastic design. Compact and all you need in a neat way provided. I salute you ! will pick up the sketchup file as the basis for sure. thanks for sharing. you're a great engineer

[@Noteven0]

Outstanding work! You sir, are an artist!!

[@gonzalojavieralarconvital4158]

¡Gracias!

[@novaneo]

Ok that is exactly the thing i tried to inagine to make it work efficiently, thank you!

[@Madebyduc]

When I first start out woodworking, I had a similar contractor saw from Dewalt. If you came out with this back then, I'd buy the plan in a heart beat to go with the workbench I made from your plans. I'm amazed by the thoughts you put into each build and how everything go perfectly with each other! This is another great piece and I wouldn't hesitate to buy if I have the need for it. Love my SawStop though!

[@wh0tube]

Ultimate! 👍👍 I wish I had seen this 10 years ago! Great design and execution 👏

[@leroymellix5647]

Wow your engine's skills are exceptional. This project is practical and yet variable so as to adjust to other saw manufacturers. My favorit is the new crosscut jig. Thanks!

[@PR-WoodWorkingCreations]

*Great Work as always!!* 👍🏻 *I loved the Idea of putting your Crosscut Sled as a Support table it's Brilliant!!!* 👍🏻

[@henriquesantos6326]

Você é muito fera meu brother tem a minha admiração, sou seu fã. Parabéns.

[@jeffmclennan1700]

I love this entire design. With the narrow front part of the out feed table you could design it to be a sled for cutting tapers for furniture etc. by running against a fence or with a runner on the underside.

[@kylehayden8769]

Love this series! Can’t wait to see what’s next!

[@Paoson_Woodworking]

thanks!

[@thewoodpoetry]

Every time a great project with high usability and great attention to detail. Great as always Suso 🤙🏼

[@rabellav]

No dejas de sorprendernos con tus ideas y trabajos. Una mesa extra muy interesante. Enhorabuena !!

[@Paoson_Woodworking]

gracias!

[@madmikemakes3056]

Absolutely stunning. Nicely done. Will check out the other videos.

[@programalaroca1360]

Es un trabajo extraordinario. Aplaudo su creatividad y su prolijidad, realmente compraría su banco de trabajo.

[@Pyatigor4anin]

Супер идея,как и всё что вы создаёте.

[@MrJo89600]

as always, the design and workmanship are absolutely incredible! You are very precise and the quality of your work impresses me. I've been following you for a long time now, and it's always a pleasure to look at your work. a big BRAVO.

[@Paoson_Woodworking]

thanks!

[@WoodnWaterGuy]

Wow, you're brilliant

[@Conscious.Craftsman]

Looks great! I think I'd elongate the saw's fence but planning something similar. Thanks for sharing and good quality video!

[@3vil3lvis]

Superb!

[@musicbydavidsmith]

Love this so much. I’ve bought the plans and will be building this when I get round to it. Thanks so much for sharing!

[@Paoson_Woodworking]

thanks!

[@musicbydavidsmith]

I also love that you use Microjig hardware. I do as well so this whole setup is basically my dream come true. I can’t thank you enough.

[@fransvanderwerf7485]

As promised. Must say, that the preparation for the design and work done is just perfect. AutoCad and Sketchup files, parts lists etc. I expected this from you somehow 👍 This makes my next steps much much easier now.

[@Paoson_Woodworking]

thanks Frans!

[@duczman76]

hats off,nice piece of work.what i really would like to have for my dwe 7492qs is a small infeed table.

[@MASI_forging]

Outstanding work ✌✌

[@jewdd1989]

I loved the first one and I love this one! I have the newest Skilsaw Wormdrive 10” big jobsite saw and it’s similar in design to the one you have… I think this design would work perfectly for my needs and my saw. It already has a nice stand but it’s so heavy and I’m tiny at 5’1” so I could make this table the right height for my size

[@bamsebrumbamsebrumen5403]

A very nice design.🙂

[@IEnjoyCreatingVideos]

Great job on the folding out feed table Suso :) Thanks for sharing the video with us💖👍😎JP

[@darkosimic86]

Your attention to details and craftsmanship is really second to none! I am surprised you are not using cast iron saw any more; are you not happy with how it performs?

[@Paoson_Woodworking]

I'm making this bench to work outside the workshop. In the workshop I will continue using the cast iron table saw!

[@luissojo6885]

Bello el trabajo

[@garrydye2394]

You know what I want to see you build. A smaller bench that can be folded down on wheels and rolled under another workbench. Most people work in a garage and space is limited. A bench with a machine on it that can be lowered and rolled under another bench for storage and then rolled back out and lifted up (scissor lift) to use again. I would buy this plan.

[@louislebrun8067]

Love this project, when does the next vid drop?

[@farazin_choob]

Thank you very much for sharing 🙏👍🌴🌹

[@mlmccollum100]

Need to make an infeed table as well

[@BdoPapa]

Wow, Exelente

[@CARPENTER_AJIT]

Best warking

[@je-fq7ve]

very nice design. I would put larger wheels on it for a jobsite saw.

[@gabrielvaldez6877]

excelente!

[@sebastien9193]

This is a very good solution, for long pièce of Wood I found it lacks 15 cm in front of the table to help. Maybe a mobile support could ne helpfull

[@JacksonDad1]

I need this! Has anyone attempted building it in the US with the cost of good plywood? How much did it cost and how long did it take? This is a brilliant design!

[@georgecooksey8661]

Gracias! I’ve looked for the black MDF here in the US, but haven’t found anything, yet. Is your source international, by chance?

[@Paoson_Woodworking]

trinityinnovations.net/product/colored-mdf-panels/

[@ronbryant2282]

you could add leveling bolts through the arm that goes into the saw for attachment, then you shouldn't have to monkey with adjusting much anymore.

[@pierremarais7669]

Hi my saw does not have the two knobs you rever to to keep the outfeed table attached to the saw, which model saw do you use in the video, thanks Pierre

[@Paoson_Woodworking]

kzbin.info/www/bejne/f6fGg2RnqatsiNUsi=AaPLfQvn1XUVyR4F&t=712

[@ForgeAheadwithMike]

Is that plywood fairly standard to buy in your area? It is very nice. I'm always envious of people outside of the States who can get nice wood. We don't have much choice.

[@WoodnWaterGuy]

Do you have plans for the work table you have with the clamping holes 🕳?

[@Paoson_Woodworking]

Assembly Table Plans: bit.ly/41SeBRT

[@ЛеонидФёдоров-о3б]

Классно конечно, но не понятно зачем так усложнять. Не проще ли сделать поднимаются створку на петлях и подпирать ее одной ножкой?

[@reaper060670]

I love this table saw build my friend. I watch ur videos a fair bit but of late I haven't been. This is a stunning build again. I liked the older model table saw u built before this one. Did u get rid of that one?? It was really well made as well. I love the look of this Black MDF. How hard is it to get these coloured MDF sheet goods?? I watch another channel called HOOKED ON WOOD and the guy on it Denis says it's food colouring they use to colour the MDF? Is that true? I have found a place in my area in Dublin and I'm going to go see them about this MDF. It makes really nice work surfaces. This is brilliant man. Where do the ideas come from? Was it out of neccessity that u decided to rebuild a newer version??

[@TheFlightstick]

Hello, I'm really excited about your design and would really like to recreate it. However, I would like to use Black MDF with a thickness of 19 mm. The plate is 2800 mm x 2070 mm. Could you possibly tell me whether this project is even possible with MDF of this thickness and how much of these boards I need? I would also like to broadcast all of this in a KZbin channel. Overall, I have a very large project to build and want to build a complete wood workshop. Thank you very much and best regards from Germany

[@Paoson_Woodworking]

do you want to make the entire workstation with that board? Please read these two articles, then you can send me your questions by email: bit.ly/45Qoj9h bit.ly/3piasDg

[@karemart74]

What is the name of the black material used for the top? Thank you.

[@Paoson_Woodworking]

www.paoson.com/blog/en/how-to-modify-the-folding-woodworking-workstation/

[@DarikX74]

🔥

[@MrGhostwolf666]

Are there plans for the outfeed table

[@Paoson_Woodworking]

bit.ly/44kHDvf

[@nostredemus3171]

Good morning. I'm looking for inspiration for my one car garage table.I just watched a series of table making videos. In the video, you repeat several times that this shed is suitable for small workshops and garages. Even though the table looks nice, I cannot agree with your opinion. The design includes storage space for all components. For example, storing a table with a saw under another table. To me, total nonsense and a waste of space in a small garage. The space can be used much better. They are 2m cubic space. The additional boxes then need to be placed somewhere else.

[@ПриветЗемлянам]

Супер! Но тяжеловат.

[@rizzoholmes]

How about free plans

[@pumapuma6067]

👍🏼👍🏼👍🏼💪🏽💪🏽💪🏽

[@generalzugs6017]

This is all fine and dandy, don't get me wrong, I love your work, but all these modular systems where you have to first assemble a tool, then disassemble or change something to use something else, gets really tiring really quickly. Sometimes you just wanna make a single cut and not waste a couple of minutes to assemble your tool.

[@markwhitis]

Yeah, it's a scam but it is possible to change the frequency/wavelength of light using a frequency doubling crystal. Used in lasers.

[@СлаваЗагоровский]

Ты что то нормальное сделаешь - а то одни верстаки из Фанеры - верстаки для верстаков ... ?!!!))