DODGE CHARGER RF HUB SOLVED/ KEYLESS ENTRY WORKS, REMOTE START WORKS,NO DRIVE. WHY?

This video will go over how to diagnose a RF hub issue with a dodge charger 2015. Symptoms of a bad RF hub can be not able to drive with push to start, keyless entry works, remote start works, no check engine lights.
#dodgecharger #nodrive #disabledvehicle #remotestartworksnotpushtostart #RFHub #mechanic

[@user-bo3wo1md1j]

الف تحية لك من العراق انا لدي سيارة نوع دوج جارجر ٢٠١٨ وقد فمت بحل مشكلتها عن طريق مقطع الفيديو هذا شكرا مره اخرى

[@fighterofgolden2906]

اخي عندي 19 مدى البصمه قليل اما بقيه الامور طيبه منه السبب لولا

[@tylerfermin5270]

i paid $400 for the same diagnostic in florida bro. so how do you reprogram the rf hub?

[@tylerfermin5270]

im thinking i had a short too because the electric power steering went out too

[@YuckFou0x0FFFF]

Damn. I just discovered this problem on a Chrysler 300 and only charged the customer 150. Thanks for the info, I had no idea how hard I was undercharging. To reprogram, you will need to the key programming pin code and a bi-directional scan tool. Basically atleast a $900 upfront invest minimum. It'd probably be cheaper to hire a good locksmith or aftermarket tech.

[@YuckFou0x0FFFF]

Damn, I just discovered this problem on a Chrysler 300 all from scratch reading system wiring schematics and component operations from the service manual. I did not realize how severly I was undercharging.

[@dannydagod9795]

I have one question was a red light blanket on your dashboard

[@soulodecarlo8108]

It is on mine 🤣

[@AutoTechElectronic]

Cristian, you cannot use a used rfhub, it needs to be new along with new prox remotes.

[@dtnel]

You can use a used one as long as it’s good. Lookup Eeprom, we do this stuff all the time with car modules. Did a 2017 Land Rover Range Rover Sport recently on the bench. Programmed 2 keys to the module, installed module in vehicle which customer had removed and brought half hour to me. When I installed I pushed button on each remote, lock/unlock system worked. Went in drivers seat, hit start button and car started right up. Ur right about them being programmed but we can do used with proper tooling.