Dodge D100 - Hedman Headers Install & Much More - 318 - 5.2 Mopar - Ram Truck

This video chronicles the header install that snowballed into a much more extensive project due to some unforeseen issues.
www.zeroempire.net
Music:
No. 1 A Minor Waltz - Esther Abrami
Scorpion Queen - ZeroEmpire
Memories of a Damaged Mind - ZeroEmpire
Sociopath - ZeroEmpire

[@leegoldeneagle9003]

Very nice sounds good 👍👍😊

[@ZeroEmpire]

Thank you 😋 Appreciate you watching!

[@keenejunk697]

I’ve been told you can’t do much with TBI motor cam wise is that true ? I have an 89D 100

[@ZeroEmpire]

There are cams available but the Throttle Body Injection system itself is a limiting factor on how much power can be made. The throttle body is rather small and doesn't flow too well. A lot of guys convert to a carb or aftermarket fuel injection. Thanks for watching!

[@2435rats]

Did you plug the smog pump ports on the heads?

[@ZeroEmpire]

Yes sir, we did. If you look closely at 6:20 you can see them. Thanks for watching

[@AngelGarcia-rd6zg]

Do you have a part number for the headers? I have an 87 dodge d150

[@ZeroEmpire]

Thanks for watching! These are the headers I used: www.summitracing.com/parts/hed-79080

[@stevenlogue794]

What did you use to plug up the smog ports on the head?

[@ZeroEmpire]

It's been a while, but if remember correctly I tapped the holes for a 1/4" set screw and plugged them like this: kzbin.info/www/bejne/enO8qquXq7V9a6csi=hF06MOYknoRZXnFt Thanks for watching!

[@stevenlogue794]

Thank you very much! @@ZeroEmpire

[@patatocultivator4184]

What had to be clearances on the frame?

[@ZeroEmpire]

Just had take off a little near the two center tubes. You can see the area at the 10:33 mark in the video. It may have been ok without it, but some minor grinding made made it better. Hope this helps. Thanks for watching!

[@JeffSmith-gl8ty]

How many miles are on the motor?

[@ZeroEmpire]

About 168,000