Drill Doctor 500X Drill Bit Sharpening

Drill bit sharpening, how to use Drill

[@lvl5Longbowman]

Been sitting in my shop for nearly 3 years. Just learned to use it.

[@ohdeerme]

Great Video............Your step by step instructions were FAR more Helpful than the manual...Thank You !

[@ottogoepel9057]

my compliments on a channel that does not start out with stupid loud noise. others should take a hint from you.

[@MarioGomez-xc4yc]

when starting with a broken or cut drill bit i usually grind it , just to help the Drill Doctor a bit so as not to dull or wear out the diamond wheel in it. ( itll probably make the Drill Doctor last longer). Ive done it and works just fine using my method folks.😉

[@renalshomlmes338]

"Split point" is the term you are looking for instead of "self tapping" or "counter sink".

[@georgelatif3668]

claws need to be on inside flute to attach correctly ,then you need to andjust depth.

[@Fucknuts4u]

Which part of the video are you referring to?

[@VISATcomms]

Thanks....really good demo, better than the instructions....going out to the shed to sharpen my bits!

[@chichovolcan]

Hi, if the step drill bit is from Drill Hog, is a lifetime guarantee. Just send it to them, you will get a new one.

[@pear7777]

Yeah usea gringer within an inch of your digits..

[@joevisueth]

I just got mine so watching vid how to used

[@stevedonovan9265]

Thanks

[@Jimmy_Cavallo]

💥💥 Thank you for this great video. It sounds like the motor almost comes to a complete stop every time that the bit contacts the grinding stone as you rotate the assembly and I’m wondering if that’s what is going on. Also do you know how this model compares to the 350.?? Much appreciated 🤟🏼

[@renalshomlmes338]

The diamond wheel is no where near stopping at any point.

[@hpszeref1807]

When i connect to 220V , This machine was broken , How to repair it?

[@georgelatif3668]

claws need to be on inside flutes for correct positiong,you cant just lock it annywhere.

[@Fucknuts4u]

Which part of the video are you referring to?

[@AlexT-md9df]

Every time you use that grinder I’m shitting my pants

[@jackyork9065]

i try see if you going explain what is number for 118 and 135 ? can you give explanation , thank you

[@christopherconlon4360]

the degree of the angle of cutters on the bit. Most metal bits have a 135 angle

[@almonjacob3496]

very good video, you just sold a drill doctor.

[@spooge33]

When my Uni-Bit gets dull I just drill a pilot first. As long as the rest of the cutters are good. Otherwise, its a sinker.

[@oscaralfredochavezpineda8717]

Cuánto cuesta aquí en El Salvador?

[@royalplan4963]

Si la compras por aeropost te handa costado aproximadamente $ 150.00

[@oscaralfredochavezpineda8717]

Adonde puedo comprarla aquí en El Salvador?

[@royalplan4963]

Hola yo tambien soy de El Salvador y la puedes comprar en amazon usa mediante aeropost

[@MarioGomez-xc4yc]

Amazon ! 🙏🇲🇽

[@ThomasTaylor-mi2ee]

Unable to hear you. have some hearing loss and even at full volume I cannot hear you well enough to find the video helpful ..

[@Fucknuts4u]

That's your problem, get some gd hearing aids.

[@mikehendrix6558]

Volumn on max and vmbarely can hear you. Fix audio and ill be back

[@davekrause-fw7xo]

SPEAK UP

[@NathanTOrr]

The two white lines......"you don't want them up" .....wtf??? I'm going to a different video from someone else.

[@80SWoods]

Don’t be a jerk.