VQ35HR vs VQ37VHR: Which One is Better?

[@Dustrunnersauto]

If you guys enjoyed the video, please SMASH THAT LIKE BUTTON. It helps the channel out a huge amount and helps KZbin put the video in front of more people. Thanks for watching 😬

[@oskarkarrera]

Intro something unique that is U and ur all set

[@maxgomez7989]

Hi Sir, the VQ37 does not have variable timing on exhaust side. I've asked multiple tuners and VQ engine builders as well.

[@nismo_zrz3321]

The best thing to do with an HR is combined the two! VHR bottom end with stronger rods and pistons and HR heads with cams, add some boost and you have an animal of an engine!

[@christianallen9653]

Just for info, coming from someone with experience with the VQ platform and having swapped an HR into a DE platform I can confidently say that DE to HR is relatively easy, however a DE to a VHR is a lot more of a challenge. There's some great info you shared, and I appreciate your attention to this amazing engine platform.

[@vapor_knight8883]

I'm currently swapping a HR into a 2007 infiniti g35 coupe that had the DE motor in it and I am having some issues with ignition. The cars anti theft system life remains red and the car keeps running the starter and only runs after 20 or so times turning the key. Any advice would be most appreciated

[@christianallen9653]

@@vapor_knight8883 On the new ECU you've got to disable NATS. The person who built your harness would likely offer this service. If not, you'll need to have someone disable it in a tune or flash it or something

[@ricardohay4653]

What all needed for hr swap

[@spartanboss4189]

35HR or 37VHR block with 35HR heads is where it’s at, there’s a N/A 600hp VQ 4.2 stroker with that combo.

[@ibanezmakki]

You really know your stuff man. Great video. Btw, in the real world, there's not been much of an improvement with the extra displacement of the G37. Sadly, the added weight/refinement offset the HP gains. If you wanted a lighter and more agile car, the G35 with the HR is probably better.

[@timsworld9342]

I love my 370z so much that i have 2 of them. The motor is the best it always screams for more.

[@sleazymeezy]

I love the squat, wide shape of the 370

[@baudchaser]

The HR and VHR share the same block. The "slightly greater displacement" of the latter is a function of the greater stroke imposed by a different crank/rods and can't be determined by simply looking at the outside of the engine.

[@baudchaser]

​@@stevenp3176 But the crank does, and using a different crank will require different rods.

[@stevebrown6175]

@@baudchaser or a different piston pin height

[@07wrxtr1]

Which - is EXACTLY what he mentions in the video...

[@DavidSmith-tz9bx]

I built a Ford FE 428 years back and used a Rhoads cam and lifter kit, it had pump up hydraulic lifters that kinda did the same thing. that said I have a VQ35DE now, and love it, and respect the HR's around :-)

[@MegaSling]

Just bought a 2023 Nissan Frontier which has the new VQ38DD engine with a compression ratio of 11:1. Thing pulls hard and I'd like to see a comparison done with this engine.

[@ICEBLUNTS]

Me too, I bought a Nissan frontier 2024

[@Ricky-gr6uc]

It's very similar to the vq37 drove one of them frontiers and floored it and it sounds exactly like a stock g37 just that it doesn't go up all the way to 7400 rpm but yeah the engine sounds exactly the same

[@christianmichalsky2826]

Other than the purpose of this video, today I learned that Bryce is a metalhead 🤘😈

[@lexusvip4003]

I love racing G37's in my G35xS.... (2008) I usually always win. That 7 speed transmission is supposed to be superior to my 5 speed. (I guess the Intake, Exhaust, & other small mods add up. My G35 is FAST! Just did the Waterpump & Gallery Gaskets also, so she's ready to run for a while!)

[@keithschaedel2951]

I use regular gas in my 2007 G35. I've had no power or knocking issues. I've learned that if the compression ratio is more than 10.5:1, you should fill up with premium. After all the years I've owned my G35, I have always filled up with regular. 156,000 miles later my car runs like new, uses one third quart oil after 3000 miles, some of which seeps out of the original valve cover gaskets. My G35 is VERY fast, reliable and I love my blue 4 door sports sedan. Keith Schaedel.....................................5/12/2022........................

[@gregoryg9500]

You are really a great information source for a guy who got tired of his GT500(still in garage), and bought a 09 G37 Journey to tinker with. I'm 2nd owner, and don't wanna change this car, or spend unnecessary upgrade money. So far Stillen catback, Z1 CAI, and going to Dynosty in Louisville, KY next month. (I live in KY). Old thread, I know...

[@viciousvq1824]

I love my VHR

[@e46m54nissansr20937]

Says the guy beating Five Os and 392s

[@Lofi.z34]

@@e46m54nissansr20937 Yea. Doing the same here. Mustangs are slow, 392's put up a good run but I still pull. Also beat an AWD Tesla model 3... ballparked him and he got an early launch

[@e46m54nissansr20937]

SwaffyX Wow

[@viciousvq1824]

@@Lofi.z34 lol in a 370Z? Hell No.. Race my S550

[@Lofi.z34]

@@viciousvq1824 Yes. I've pulled on 4 different 5.0 mustangs and two 3.7s. And one 392

[@55Berg]

The only thing I don’t like about the vhr is the vvel system. They constantly come into the shop with problems and the vvel always gets screwed up some how. Other then that they are great engines. I’ve owned two hr’s and I can’t get enough of them.

[@videomaniac108]

I have 41K miles on the vhr in my Z and haven't had any problems whatsoever. The engine runs quietly and smoothly, using virtually no oil between oil changes.

[@spideybuildscars]

We rarely get problems with the vvel, sometimes the actuator goes out but it’s usually people not changing their oil

[@archangele1]

I own a 2004 350Z and a 2014 Q60S . Both have 6 speed manual transmissions. I can tell from experience that my old 350Z has a LOT more bottom end torque then my newer Infiniti. But, the Infiniti's 3.7l engine winds up a bit higher and has a bit more power at the top of the RPM curve where as my older 3.5l seems to develop it's top hp at much lower RPM. Basically, I can get a strong pull from the old 350Z at as little as 1800 rpm where as my newer Infiniti's 3.7l engine does not start to pull strong until at least 3000 rpm. As for acceleration, the 2014 Infiniti I have accelerates to 60 at the exact same time as my old 2004 Nissan 350Z. Of course, the Q60S outweighs the old Z by over 500 lbs. Gearing is the same. By this I mean the cars run the exact same road speed at the same RPM. Advertised HP for the two cars is 287 for the Z and 330 for the Q60S. Both engines run very smooth and neither uses oil. The one thing the 3.7L does not do that the 3.5L does is that start up rattle of the timing chain. The old 3.5L engine will give you this fraction of a second timing chain rattle at start up where as the 3.7L in the Infiniti is dead quiet at start up. So, Nissan must have done something to that chain tensioning system in the newer 3.7l engine.

[@nighthawk0077]

Here check out how great the DE is: kzbin.info/www/bejne/lWK9Y6iFZ7igp9U

[@mobin5547]

Does the rattle occur during cold starts?

[@max1tax1]

I thought Q50s didn’t come with manuals

[@corvettezr1ism]

Bro you dont own a q50 or q60. Those don't come in manual. Only the 7 speed auto

[@archangele1]

@@corvettezr1ism Yea right. Well? it has a clutch, and a six speed shifter. It was made in 2014 and is an Infiniti Q60S. If you knew what you were talking about you would know that although rare, the Q60S made in Tochigi Japan can be ordered with a six speed manual. It was the last year for this setup. I believe I know the difference between an automatic and a manual transmission. If I had a way to send you a picture I would.

[@anthonycoffey9412]

I never modded it but I loved my 2015 370Z 🥰 I miss it every day, but imo it didn't seem like it was happy at higher rpm.

[@stophatingmichael6767]

It was happy but I know what you mean gets real harsh up top. It was e engineered to live at those high rpms

[@sleazymeezy]

@@stophatingmichael6767 double reinforcement compared to the DE gotta love that

[@SlamTF2]

to be honest a lot of the reason why higher RPM's don't feel/sound right in the 370z is that the default tuning and VVEL system are really poorly done for high performance and sacrifice a lot of what you want at high RPM's for better efficiency/fuel economy at the low end. A decent tune will make a huge difference for driving it hard because of this.

[@karascott178]

Great info! Just bought a 2015 Qx70 and loving it!! I’ve always wanted this engine!!

[@glenbertpeterson922]

Can you make a video of which one is better to modify for performance

[@chrisnas1483]

They change the bolt pattern, cause of money.. to charge more.

[@GT-Tezzy]

Yes

[@tylwyth]

IIRC the primary complaint about the VHR is that the VVEL mechanism dumps a fair bit of heat into the engine oil.

[@videomaniac108]

This is true, the VVEL mechanism heat stresses the oil. The recommended Nissan engine oil that starts out as a 5W-30 gets sheared down to a 5W-20 after about 3K miles according to used oil analysis reports.

[@vtecnegro85]

This is why I use boron additives in my oil even then the oil I use already has some.

[@pushhrodd01]

Jim Nesta i’ve always run 5w-40 seems to work good

[@Dustrunnersauto]

Aftermarket oil coolers arent that expensive 😉

[@carlinleneker-frisch976]

Vqs are just RB25s that are na and squished together. Both can make great numbers really.

[@jaimeramirez-perez7198]

Squished together 🤣🤣

[@garethjohnstone9282]

It'd be a 5.0 V10 then.

[@gigi_subi]

I don’t own my vhr 370z nismo anymore but damn that engine is solid and very linear. One complaint, I hated the exhaust noises. Changed the exhaust more than I change underwear jk obviously but you get it.

[@Dudeman9339]

shoulda left the stock pipes on, then.

[@justinchapman6383]

I have a question. what' transmission is better the 5 speed auto from the 35 v36 or the 7 speed auto 2010 g3.7 v36 and up

[@ianmiles2505]

They moved the bolt holes to combat theft. Engines that are standardised become swapable and therefore more desirable by thieves.

[@AC_metro]

Not doubting your comment but it doesn't make sense. The Nissan bean counters could care less about the end user and would be more concerned about reducing costs. Changing the bolt pattern would cost more since it would require retooling the manufacturing process.

[@nathanielgathing659]

​@A C Depends on the manufacturer and their process. You can always find other places to cut cost.

[@gotgoldgt]

Now do VQ37VHR vs VR38DETT

[@drippp4257]

Bruh VR38DETT is literally GTR VHR ain't doing shit lol😂

[@killakam123321]

@@drippp4257 ikr not even fair n/a vs turbo v6

[@jabari7995]

no the vrh vs the vr30tt

[@justinchapman6383]

More like rb26dett vs the vr38dett. Like previously stated 3.7 vhr would be better compared to the vr30tt. I'v heard that the vr30tt isn't as reliable but the vr30tt is more turner friendly and that's probably causing it's bad reliability

[@bryan152]

Got a 2008 G35x and i've raced G37xS and gotta say It was pretty neck and neck!

[@automotivetv9861]

really??? no way! I was in the market for both of these cars but the g35x is so much cheaper

[@Jdm22345]

They are pretty close I believe because of weight difference

[@automotivetv9861]

@@Jdm22345 i know that, every one does.

[@Jdm22345]

Automotive TV then why act surprised if you already know

[@automotivetv9861]

@@Jdm22345 because his facts are based on experience while yours are just theory.

[@eduardoramos2281]

I love my VQ35HR so quick and fun.

[@Dustrunnersauto]

I bet! Probably way quicker than my turd DE 😅

[@drippp4257]

My uncle has both hr n vhr fckin fun n super fast as foo👍

[@Qkfltpdls777]

Which viscosity and brand of engine oil are you using on your VQ?! (Am running synthetic 5W30 on my 35HR because am scared of engine oil pressure issue or so due to using thicker engine oil such as 5W40 although i want to use thicker one..)

[@Highwayvillian.]

I got a quick question.is the vq35hr and the vq37vhr cam position sensors in the same place cause I can’t seem to find any in the back but two in the front(vq37vhr)

[@adamabdelrahim1072]

The vhr cams are bigger idk if you noted that.

[@drizzetsrevenge]

Bigger? Not by much.

[@Dustrunnersauto]

Bigger as in physically larger or just larger lift?

[@WXSTANG]

VHR uses smaller spark plugs. Smaller plugs have less dielectric strength... meaning worse for spark in boosted applications... but they needed to do that for space the variable valve timing on exhaust and intake.

[@EugVR6]

Waiting for a DE owner to say the DE is the best and then the list of justification bullshit of why it's the best🙉

[@carlinleneker-frisch976]

Better to be a DE owner and not a HR leaser lol

[@InvestingWhileBroke]

Carlin Leneker-frisch aye you got his ass

[@Cerrvto]

@@carlinleneker-frisch976 got my Clean Title HR for 4500 and I’m the 2nd owner 🥶

[@couch1596]

@@Cerrvto Aye me too 07 g35

[@Kingjvy_88]

@@Cerrvto same here 08 g35 Hr 2nd owner got for 4500.

[@randybravo3690]

The vq35 de rev up is the best change my mind

[@nilnine1231]

I have a 370z Upper and lower Mani on my VQ35HR. Sooo... Yes you can. You need the upper and the lower though. Also You can take a 3.7L short block and slap it under the HR heads and now you have total timing controll and something that easier to tune especially with aftermarket cams. The VVEL also heats up oil faster as its oil actuated. Most race teams use HR heads. Though on the street this probably isnt a huge deal.

[@NismoJuice]

Hr heads with vhr block and pistons?

[@alexscarborough6263]

@@jgm113 hr pistons vhr crank and rods

[@fivepointeightnate]

Pretty sure you have to grind some clearance on the HR35 pistons when using a VHR37 crank and rods. Blocks are all the same.

[@TraceElliot42]

Why do 37VHR hesitate in initial acceleration VS 35HR? I owned an I35 and an FX35 and now I own a QX50 with the 37VHR and it’s very noticeable. Thanks!

[@korosuchimu1479]

Hi, do you know the physical height difference between the 35 and 37. From pan to top of intake? Thank you for this upload

[@Smoothey999]

37 inches

[@korosuchimu1479]

@@Smoothey999 thank you. I have the vq30det in my y33 cima.

[@mcfragil]

let's say I took my g37 to a junk yard/mechanic for a engine swap. Is it possible for them to throw in a vq35hr instead of the vq37vhr? I'm a little skeptical of what they did

[@supersaiyanx3]

QR & VHR owner here !

[@cedricmiller4370]

Yea the QR is a good engine too I see why Nissan kept them in the Altima since 2002 until current model Altima

[@linchester8464]

The VQ35 and VQ37 while tunable are getting on their age since there is no Fairlady 400Z coming yet. But now the next rage is getting the VR30DDTT and swap into the 370Z chassis. The VR30DDTT comes from the Infiniti Q50/Q60.

[@daneilfan3946]

can u swap it into a hr 350z since you can swap a 370z trans to a hr 350z?

[@linchester8464]

@@daneilfan3946 that i cant tell you. But my friend is doing the VR30DDTT swap and he using the 370Z gearbox with a custom flywheel and clutch. Motor mounts are needed to lower the engine

[@MrDaoby]

I'd say bang for the buck though boosting a vq is still better and much easier compared to swapping a vr due to VR pricing for parts.

[@linchester8464]

@@MrDaoby if you are lucky. You can get the engine from a co part car. My buddy got the engine and trans for 2/3k. And sold the trans and now only paid 1.5K just for engine and ECU.

[@e46m54nissansr20937]

Yup you're right

[@sharpemang]

Idk. On my 370, I feel like I need to rev it up pretty high to get a substantial amount of power out of it

[@Arctice36]

Yea I’ve noticed that when I bought the g37x l, I’ve driven an is250 for awhile until I bought the g, the 250 has great get up and good it really feels like it has more low end torque below 3k than the Vq37, I’ll have to use half throttle and at least 4K rpm to get up to the speed limit witch gets annoying because I just want to drive normally, these VQ definitely don’t have effortless power lol

[@nighthawk0077]

Yea he mentions that in the video several times. They actually sacrificed low end power even with the longer stroke. He should have also mentioned the gallery gasket and the over heating issues due to vvel

[@corvettezr1ism]

You have to be in the right gear. I usually get enough power over 3k rpm gain speed effortlessly. The torque is very flat and linear

[@corvettezr1ism]

@@nighthawk0077 galley gasket issue was solved after 2010 model year. My g37 had never once overheated. I even tracked it at the dragstrip and around a race course

[@sharpemang]

@@corvettezr1ism do you have a VQ37 or the VQ35 hr or de? When I had the DE in my 03 350, it felt a lot quicker than my 370 just because of the kick it had at lower rpms. It felt more enjoyable to drive because I didn't have to put in as much effort

[@maxgomez7989]

As long as its not tuned by admin , you're all good

[@richiesworld1]

Which one lives after a throttle body clean without idle issues ?

[@e46m54nissansr20937]

You need to do the throttle and idle relearn procedure

[@BigRedtheGinger]

I think Nissan changed the bolt pattern to charge more. Would it be possible to make a video about the Honda K20C2, sometime? Possibly compare it to older NA Honda K series engines? I know they did away with the typical exhaust design, going with one massive port, rather than using an exhaust header or manifold.

[@srwurgler]

Also swapped the intake to the rear of the engine bay, like the b/d/f/h series. New k20s are built different

[@privatenexus5764]

ummm... did you mention (or did I miss it?) the power/torque increases? any changetro max REVs or REVs at max Power/Tourque?

[@sm57fit]

I’m stuck on which I should get a 350z or the 370z thanks for the info💪🏼

[@jose.valles7572]

If you want a 350z get an HR

[@jose.valles7572]

In my opinion get a 370z

[@sm57fit]

@@jose.valles7572 thanks

[@sm57fit]

@@jose.valles7572 thanks appreciate it, I have been looking around

[@DeFuzeCSGO]

I recently got a 370 and been enjoying it

[@tksperformance8789]

I've built a few of these, right now I've got an 07 HR with a vhr rotating assembly. In my opinion the rods look the same as far a design but with the vhr being shorter I'm thinking that's why they hold up to more boost. It's not much though, HRs usually break if exceeding 500 lbft at the wheels, vhr will hold about 50 lbft more, both in stock form. Torque is the amount of force exerted and generally is what needs to be limited on stock rods. Nice video👍🏼

[@BB-pf2cs]

Seem like the person to ask this question! I have and 08 HR. And I'm considering a 370 shell with engine and gearbox for a drift project as the 350 is Starting to get trashed. With both engines on hand, what route would you go? Keep in mind of the 350 is still road legal and registered. I was keen to supercharge the vq37 as it can handle the power that I need as I'm not going too high. Or do I just keep it Na, build the 35 and supercharged that? Any tips and advice would be much appreciated.

[@tksperformance8789]

@@BB-pf2cs hey, my bad, kinda late in responding. Id keep the 350z as an HR for simplicity as far as the wiring harness and ecu but I'd swap out your 3.5 short block for the 3.7. Maybe get the heads cleaned up with a valve job and seals. I'd use Juke head bolts and oem HR gaskets, they've been holding up great for me at 10psi. You're basically using the 3.7 short block and everything else HR. The blocks have the exact same part number so it's truly a straightforward swap gaining a bit of stroke and about a 1/2 point higher in compression ratio

[@fastingmedia1205]

Stock HR for turbo! For high horsepower it’s BuildVHR with a fat turbo !

[@williamcintron3344]

Nope the 3.7 holds more stock than the hr

[@fastingmedia1205]

William Cintron yes it does but with the 3.5 heads. The VHR as a whole has a higher compression ratio which doesn’t mix well with boost.

[@fivepointeightnate]

Seen over 600whp on the 35HR. Compression doesn't matter when it's cornfed. the VHR37 rods may be a tad tougher but when running E85 or better fuel who cares?

[@williamcintron3344]

@@fivepointeightnate yes and the vhr37 has been on the 700whp

[@Brandozvideos]

So should I sell my pristine 2008 g35 sedan AT w/ 65k miles currently and a brand new transmission put in at 45k miles.... OR get a 2014-2015 q50s to start modding for 400hp-500hp sport sedan? Would like to hear your experienced responses.

[@EatMyPropwash]

Didn’t they change the oil pump gears for stronger ones on the HR motor?

[@alphagtr88]

Does this mean that the first generation CD transmission will bolt onto the vq37vhr block ?

[@lanceamus777]

A VQ fan and Suicide Silence fan? You single by chance? 🤞🤞

[@suspensiondevelopments8913]

Will the VQ40DE Crank fit into either of these 2 engines please?

[@tonyharrison8132]

Why does everyone use VQ 40s can you do a comparison video for vq40de vq35 just need to know more about the vq40

[@carlinleneker-frisch976]

Vq40s are for the frontier and other larger nissans i believe

[@tonyharrison8132]

@@carlinleneker-frisch976 I know the vq40 is from a larger Nissan I have it in my Navara / Frontier what I want to know is a comparison video in the engines and what is different I know.the vq40 is like an inch taller in the block because of the stroke and that's where they get the extra Cubes from but what I want to know how different are the heads do the manifolds fit are the exhaust manifolds going to fit off vq35 or vq37 what I want to know is all the different comparisons if you're able to do that same question I asked before cheers Tony

[@kurifodomokuzai6667]

Excellent video!

[@e46m54nissansr20937]

Does anyone know the stock throttle body size for the VQ35HR. I've read conflicting info some say it's the same size as the VHR some say it's different. I plan on machining throttle body spacers at a friends shop

[@z31rider24]

In regard to Rod differencs; contact JWT (JIM WOLF TECHNOLOGIES) ask for either Ben or Clark. They have tons of knowledge with Z engines and parts. Also Sebastian @ Specialty Z in Canoga Park CA is a high performance Z specialist engine builder.

[@swayiglesias]

i want to swap my 06 g35 with one of these two. i’m thinking the HR will be cheaper and a bit easier to swap. anyone help?

[@automotivetv9861]

why not just boost the car??

[@stophatingmichael6767]

Do it then Boost it . My friend put an hr in his g coupe in his garage while having a full time job in 2 months

[@frankiegarza3002]

I love my vq37vhr, coming from the Acura TL Type-S the difference in speed is most definitely there, and railroad drive compared to front wheel drive is a whole lot more fun among having two more years to being on but other than that I kind of wish I got the manual but I do have a manual truck so kind of not missing having to shift gears all the time in the daily driver.

[@ssjdavid]

Facts I was gonna get a TL but wanted a rwd car glad I got a G

[@370ztek]

I am boosted on my 3.7. No issues and make 600 whp. So it takes boost just fine.

[@donbandz6350]

What all is added to it? And you spent about how much to boost it?

[@nedunonnyp704]

Hey Do You Know about the VQ Engine to GM Transmission Swaps?

[@stevebrown6175]

Can you put the VQ37VHR crank in a VQ35HR and have a custom piston made with a higher pin height and end up with a VQ35HR stroker? Or alternatively, just swap out the VQ35HR short block for a VQ37VHR and achieve the same thing.

[@easypeasy8690]

i have the same question

[@jonny_z__370zna5]

There is 0 debate, the VVL technology and the bigger motor from the VHR is far more advance in producing power with efficiency. I wouldn't even buy a HR motor for any price.

[@55Berg]

Well I can already tell your biased cause you have a 370z. But the differences between these engines are very minimal. The vq35hr is an amazing V6 and barely any different then the 37.

[@firebreather360]

The video literally says they're the same motor on the bottom end. The bore is the exact same. The only difference is the increase in stroke. VVL is nice but it's not a make it or break it technology. To further prove a point, quarter-mile times and street race videos (even though you can't always go off of these) all show that the speed difference is usually focussed around driver mod or tuner experience. Considering you can get a 350Z HR for around $6000-$10,000, and the 370Z is usually $10,000-$20,000 (for one that's NOT brand new from the lot), I would say the choice is easy. Plus the 370Z interior is ugly XD

[@55Berg]

@@firebreather360 you know your shit.

[@jonny_z__370zna5]

@@55Berg I been working on both for the last 4 years and racing them both. Its almost comparing a NASCAR to a Block of cheese.

[@jonny_z__370zna5]

@@firebreather360 They are nothing the same besides the block.....that's like saying a 370 has the same engine as a GTR.

[@Zspeed]

Awesome video, thanks for sharing!!!!

[@johnsmith-bc1gb]

I have a 07 Infiniti g35 hr could I put a g37 vhr in my g35

[@dnshift1]

How about those VR38DETT what is the difference between the VQ's? Thanks

[@Mr3kbeats]

Different manifolds , bigger block , etc

[@shmaymondshmoos5180]

block is also machined different so that its more stable at higher RPMS and can handle more force and vibrations since it has oil passages around the cylinders instead of them being completely disconnected from the rest of the block (forgot the real terms for them lol) as well as other design features that improve performance. probably also has lighter weight and stronger crankshaft, pistons, and con rods so that it gets better throttle response and higher RPM. and some higher airflow design. IIRC the V angle is pretty different aswell. along with being twin turbocharged of course, which is the main performance gain along with the very slightly increased displacement. Nissan goes up and above with all of their GT-R drivetrain elements, like the dual clutching automanual tranny.

[@dnshift1]

Not Raym0nd excellent 🤙🏼🤙🏼🤙🏼

[@sc0llay]

VR38 has normal cams, only VVT on intake cam, closed deck, stronger crank, plasma sprayed bores

[@michaelhernandez5411]

Why are the 12:1 compression ratio coyote engines taking boost with ease? Almost doubling their horsepower?🤔

[@Slays_Media]

Really damn strong internals and e85. 😂

[@darealdjgr107ve]

I’m doing a engine swap which should I get I have an Infiniti m35x

[@ingegneriafacile]

But why they have an open deck?

[@ald1292]

Which g35 has oil consumption issues and what was the cause and solution?

[@saad3505]

Albert Caval i believe all of them have the de motor which is liable to oil consumption

[@saad3505]

cause was most likely weak piston rings and a solution is a oil catch can which will only help with oil burning not consumption

[@jacobstiltner9387]

rev up DE engine 05-06 g35 6s I think I got that right

[@saad3505]

jacob stiltner de’s can also drink oil just as bad as rev up. i’ve had a 04 z that i had to add a quart every two weeks

[@jacobstiltner9387]

Saad Sirhandi I had a 04 g35 and it consumed oil but wasn’t anything out of control the thing I hated the most about mine was the location of that stupid ass dip stick.. like if you had an aftermarket intake you could hardly get it in.. but I upgraded to an 2014 Q60 IPL and absolutely love the VHR

[@briarstern1261]

Galley gasket?

[@richardsharma283]

Briar Stern I heard the 37VHR from 09-11 model years had that issue too so I’d rather stay with the hr and keep the reliability than run the risk of that vvt issue which is a hefty repair

[@corvettezr1ism]

After 2011 or 2010 it was fixed by Nissan

[@08VaNupe]

I’ve owned both and I agree both are good but the HR seemed more raw

[@1mpulv]

Great video thanks

[@Xavierthiltgen]

Compare the vq hr or vhr to the vr38dett

[@vqRob]

Question could VQ37 heads fit onto a VQ35?

[@handymani4502]

I don't think they will

[@handymani4502]

They might, but there may be some loop holes to deal with. The motors are very similar

[@Make.nuggets26273]

They do I will be doing the opposite and putting my hr heads on vhr block

[@Jonathan-sy5vq]

@@Make.nuggets26273what else do you need to do to swap hr heads onto a vhr

[@henrymartz6921]

(QUESTION). when driving an automatic g35, if i press the gas fast then let it go and it makes a downshift sound, and it makes me go way faster when thats done, does that ruin my engine over time ?

[@ddk1422]

Its just shifting lags. Have the same thing on my g37

[@mebro1610]

Nah bro send it my g35 has 275k miles and I still hit 140mph

[@ald1292]

me bro wow that’s reliable

[@klj2382]

wtf?!?

[@stephenbae2049]

If they all use the same block, can I build a 35vqde into a 37vhr?

[@thouxanbrandon7812]

Your better off just swapping the whole engine

[@bryanmurphy26]

Maybe just swap the crank, rods, and pistons. That way you can benefit from the larger displacement and higher compression ratio without having to deal with the major differences in wiring, timing, and engine management.

[@loudlouisnissan9236]

Can one take a vhr and just slap a set hr heads on

[@brandondeel3567]

I know this video is old and there is probably an answer to my question somewhere but it doesnt hurt to ask this question as often as possible. I have an 06 350z enthusiast with the rev up de motor. If i plan to do only minor n/a upgraades and keep up with maintenance, do i really need to worry about my car blowing up? I want to push the performance of this car but I'm scared to because i see it all the time that my engine i garbage, cant hold power, blah blah blah. I have 3 inch y pipe open back to a greddy single, short ram intake and plenum spacer. Do i need to worry about my car detonating with minor upgrades if i push it to redline for extended periods of time? Its a drift build so redline is unavoidable.

[@tksperformance8789]

I'm sure you've gotten some answers somewhere but everybody has different opinions so I'll offer a couple of mine from experience. 1. Run synthetic oil 1 or 2 grades thicker if you're beating on an engine. Oil as thin as water is for fuel efficiency and less drag on internal parts, NOT longevity. When race teams could qualify with a different engine than they raced with they'd sacrifice the qualifying engine with thin oil for a few more hp at the expense of the engine for a better start position. I run 15w40 in my turbo VQ37HR. 2. Don't beat on the engine until the engine oil is up to operating temperature. Get an oil temp gauge. 3. Especially on these cars, watch that the engine oil doesn't overheat during competition. Get an oil cooler and use an expansion style thermostatic valve to regulate flow to the cooler, some cooler kits come with one. Oil normally runs much hotter than coolant but keep it under 280°. 4. If you're constantly at redline, consider an oil pump with a billet steel gear set. At least you have a revup to begin with, they've got better pumps than the regular DEs. 5. Put an aluminum tank radiator in with new OEM fan motors (they're better than most aftermarket performance marketed fans). And when your done with a bracket or heat, or whatever it's called in drifting, let it idle for 5 min so that the fluid temps equalize before shutting it down. Take care, good luck

[@brandondeel3567]

@@tksperformance8789 man I appreciate the info, thats actually very helpful! I've had the car a little longer and have learned a few things for sure. I do run 15w40 in it now but a big thing I learned about this particular car is that one of the previous owners swapped in the 03-05 de motor so I don't have the rev up. Also found out it has a few engine mods I didn't know about at the time. Has a plenum spacer and throttle body spacer. So this engine has oil pump issues? Is there anything I can do to boost that? I have 30lbs of oil pressure at idle which I've heard is good. The old method of whatever rpm you're at, your oil pressure should be double so at 3k I'm at 60psi. As far as I understand, thats an indication of a healthy motor. I'm going to look into the other parts you mentioned and start getting a part here and there. Haven't beat on the car yet because it still has a lot of issues with the chassis. Bunch of junk suspension parts and brakes are all warped from being beat on by the previous owner. Its been drifted before and I'm guessing the owner before the guy I bought it from blew up the rev up motor drifting it because he didn't have any of the parts you mentioned. Again, thanks for taking the time to offer me that info man, I really appreciate it!

[@brandondeel3567]

@@tksperformance8789 looking into the pump, looks like its common to run the rev up oil pump with an aftermarket gear. Is this a good idea in your experience or should I go full bullet pump and gear. I seriously doubt I'll build this car over 400 hp unless I get a killer deal on a super charger kit. Even then I won't make more than 450hp. I know these engines tend to let go at that threshold unless you do internals which I really don't plan to do. So I'll probably keep it around 400hp max.

[@tksperformance8789]

@@brandondeel3567 yeah I'm not sure what it is about the rev up pump housing but I've heard what you said about billet gears in that housing. I think you can run an HR pump too which in itself might be enough since the stock limit is 7500. HP isn't so much the factor with the pump, it's the extended high rpms that are hard on them. Crankshaft harmonics and I'm guessing the hydrostatic pressure of the oil is really high, that equals high load on the gears. Speaking of harmonics definitely don't run those cheap billet solid crank pulleys, you'd be better off with your stock pulley and ideally an ATI Damper would be a good idea, they're so damn expensive though. I don't have one on mine but i don't track it ever, just a single mid mount turbo for some fun on the highway. I think used Revups are getting scarce, most opt for the DE as a more readily available replacement so that's definitely common to do. Personally, if you like the car I'd find a wrecked HR with a good engine and swap everything if that motor ever let's go. That's what I'm most familiar with, I've got an 07. Actually I'm going to post a new video of a quick pull at 8psi. It's been down and i just got it back together and on the road. Check it out

[@Splenectomy0]

Bro I wanna talk music with you now, that suicide silence shirt is sick

[@Dustrunnersauto]

I listen to a whole lot of everything! From Suicide Silence (when Mitch was still alive), Of Mice & Men, Parkway Drive, Attila, ODESZA, Adventure Club, Logic, G-Eazy, etc.

[@Splenectomy0]

Bro that's so sick! Have you heard the new Reflections album?

[@Dustrunnersauto]

I have not.

[@Manuqtix.Manuqtix]

I can't believe it doesn't have a 2 stage vvl system on both intake and exhaust

[@drealraj]

How the vq37 nismo is bette than the regular vq37?

[@RealLeskot]

No, as far as i know, they updated ECU and exhaust setup. There are a lot of other things they changed tho, like the autorevup when changin gears, stiffer suspension, bigger brakes, facelift, interior changes etc. Overall, nismo doesn´t make that much more power, but it´s more oriented towards racing.

[@nashking817]

Got a vq35hr in my 08 g35 and there nothing wrong with it super good engine and gose like snot for what it is

[@Estevan_Leyva]

Same here my 08 G35 runs like a clock and can spin the tires whenever I want

[@nashking817]

@@Estevan_Leyva yeah I decided to get my tuned last week... Goes real good now!

[@egokilla1063]

@@nashking817 ooo nice I got the 07 g35 sport sedan, quick as frick, what should I do if I wanna make it faster??

[@automotivetv9861]

@@egokilla1063 k and N air filters, just change the 2 filter pads and you have an automatic +10 hp and +10 torque

[@egokilla1063]

@@automotivetv9861 I thought about that but wasn't sure about the results! I might give it a try thanks!

[@josemoreno2244]

Do they both have the same water pump???

[@ejkk9513]

Yes, they do! It's even worse, though. The 37 has no access port for the water pump, and you have to remove the entire timing chain cover to do it. I HATE this design. The 35 has given me more pain because of this than any other engine. Ford used the same design in their 3.7 duratec V6. They had many lawsuits over it as coolant would leak into the oil pan causing engine damage.

[@mosttemp]

worst thing on these engines is the trans which have a cap on the dip stick tube on the trans which makes it impossible to diy change the fuel without a pump

[@umarch7426]

I'm planning to swap my DE to VHR. Has anyone already done it here? What kind of difficulties could I get into? Any help will be highly appreciated

[@fivepointeightnate]

It would be better to swap your DE to a HR. The HR harness and ECU can be modified to work with your existing dash.

[@umarch7426]

@@fivepointeightnate okay, thank you

[@GideonDippenaar]

VHR was mostly Renault, had Renault stamps all over... Supposedly it was changed around later (told to me by a previous mechanic colleague), but don't trust that info... The 370 never felt natural, especially the with the weird 'auto' gearbox 😑 The electronic rev match when downshifting in the manual version ticks me off as well, are they making the cars for grandads or for true drivers/enthusiasts?

[@DJMMAS14]

is the vqhr 2.5 direct injected??

[@Dudeman9339]

no

[@eVerProductions1]

Now do a comparison of smaller old reliable engines like the Toyota 4afe vs the 7afe and etc. or maybe you already did 2jz vs 2jz with vvti?

[@Tzar___]

Still waiting for the l15b7 my man

[@happyputt9709]

37 is getting a little old woops I mean big

[@andriyandriichuk528]

VHR rods are 1mm thicker giving them about 20% more strength

[@mitch9521]

Suicide Silence shirt is B A S E D

[@ald1292]

Oil gallery gasket issues

[@lukesisson6525]

Both. They fixed it in 2012+?

[@fivepointeightnate]

All DE/HR/VHR have the galley gasket. Only a few have had it fail. Think too many people make a big deal over it.

[@killakam123321]

@@fivepointeightnate yeah I think its hit or miss. Either your engine has it or you luckily dont get it. I'm praying I dont lmao

[@jimbo5728]

Nothing bad.... until your galley gasket blows. Great engines after they fixed that issue after 2013.

[@GeloNegron]

This guy doesnt know wth he’s talking about… I have a 2007 V36 sedan 6MT that comes with the HR and I have G37 VHR Upper & Lower Manifold & Fuel Rail installed on my HR and it loves it.

[@cang1920]

I think the VHR rods look a little bigger and kinda a little stronger then the HR but don’t trust what I say I’m a beginner in cars and I wanna get a g37s coupe if I can in manual. I’m doing hella research on the car and seeing what fits and what don’t 🙂

[@noahtoombs9351]

They probably made the rods slightly beefier to go with the increased compression ratio, which would increase strain on rods

[@UltimateAPBTS]

VQ40...👊👍😎

[@Dustrunnersauto]

Why though?

[@hudansulthanihidayat46]

4AGE 16V VS 4AGE 20V TOYOTA PLSSSS!!

[@pushhrodd01]

Hudan Sulthani Hidayat as a owner of a ae92 yes!!

[@epoxeclipse]

Lol 80hp and 95hp, abysmal torques. Done.

[@z-ro34]

Ehhhhhh you’re good on boost until about 500wtq in the VHR. Anything past that, a built bottom end is recommended. The VHR is better because of the torque curve and vvel, but if I were to build a race motor, it would be a VHR with HR heads.

[@Dustrunnersauto]

Thanks for watching! 🤟🏻

[@fivepointeightnate]

@@jgm113 Got a 46k mile VHR shortblock for sale on the g35driver fourms.

[@mybeatmhz]

Im not perfect , RESPECT