This is why we bench test subwoofers - Tech Stuff Tuesday

The full build of the Sundown Team 10" • I built the biggest 10...
*Shop our website www.emfcaraudio.com
*Support the channel on Patreon / emfaudio
*Follow us on Instagram / emfaudio
*Follow us on Facebook / emfaudiolabs

[@ItisBigJ]

This is why I'll always be a fan of EMF audio. Owner takes the time to answer a lot of their followers questions even if they've already been answered previously.

[@sysierius]

Hi magnet, what are you doing with that subwoofer?

[@alanchatfield5533]

For break in when sitting on magnet you should build a piece of 18 mm mdf to sit under magnet with a hole in middle and an exhaust gap to outside of wood for air flow from pole vent. Will help with stopping a pressure build up behind dust cap and give more accurate T/S

[@elit3darkness]

Ah, here it is! This beast turned out great! Good job!

[@TheOneShirokage]

When the sweep was being played it sounded like a small block Chevy hitting 2 step!

[@bigvell02]

I can imagine they would do very well in the lanes. T/S parameters are always a good thing in my book. Nice video share! Word of that 10 is getting around Ive seen it on a few cool IG accounts and FB pages.

[@EMFAudio]

We've been tagged in quite a few resposts I noticed.

[@Csteiny383]

EMF Audio, just a word of advice. A dremel tool ( Worx makes a very small profile rotary tool that is Corded and plugs into a battery pack) with a metal cutting wheel is ideal for cutting off your voice coil from the inside. You can get a straight and perfect cut and if it is a little uneven you can grind it from the top to smooth it off. Just wanted to bring that up incase you hadn't thought of something like that. Thank you for the awesome videos!

[@attainableaudio4533]

Would love to hear how you go about calculating for perticual t/s parameters like if you did want this sub to have a lower fs or a different qts?

[@EMFAudio]

Without having known specifics on an individual part and the software to simulate it, you have to go off of experience. Lower Fs will come with a different Qts, and that can be done by using a looser suspension or adding mass.

[@jeffyoung2089]

Very cool build!!

[@badbadbrian3820]

Nice work!

[@dariocamacho9871]

That's an extremely impressive subwoofer especially for a 10 would be awesome in a bass tube like a 15 inch tube with a plate adapter for the 10 inch face and at 45hrz and up that would definitely do killer at SPL comps as most SPL competitions the Winning frequency is at 35 hrz and up to 60 hrz👍 great job on the build

[@EMFAudio]

Actually, ideal scenario for 45 hz and up for SPL would be a 3" coil driver, like our YOLO line.

[@blasekaauamo756]

I have a hcca 15 duel 2ohm motor and basket. I separated the cone, coil, and spider and wondered where i could get parts. By the way its an older version 1st or 2nd gen. 1200 watts power handling. Thank you for any help

[@EMFAudio]

Not having reconed one myself I couldn't say what is needed to do it.

[@Bendeezul]

Why is commenting disabled on your video on the digital designs 2508?

[@krishanramsammy4349]

Those sundowns have some gigantic motors crazy stuff

[@helvetinooppeli]

I also watched the build video and i wondered what subwoofer parts are the ones that defines fs. Is it so that stiffer spiders makes higher fs? It looked like you put one multilayer spider that had different colored spiders and so far all the subs i have seen had 1 to 4 similiar spirers. I`m going to make 10" subwoofer and trying to play some low notes with it. I probably use ti basket, 300oz motor ja 3" flat aluminium voicecoil so what kind of spirers and how many of them i should use?

[@EMFAudio]

The stiffness of the spiders and surround combined with the moving mass is what determines the Fs. The colors of the spiders mean nothing, they're all the same spider, colors used for identification. The weight of the motor doesn't matter, that basket is limited to 1 diameter of spider but the number of spiders also means nothing. Not every spider is the same stiffness and more doesn't mean better. To play lows you'll want a lower Fs, not a super stiff suspension.

[@tonygarner3942]

The motor diameter looks bigger than the mounting diameter of the basket. How do you mount that in a box? Two, two piece face plates?

[@simonetinarelli2921]

I want to se how can you put it insidie the hole...

[@kolten808]

Its exactly what i was expecting, throat choking bass

[@kepharolang1984]

Nice Job, what should I consider while choosing for a 10" with Fs of 35hz and below?

[@EMFAudio]

That depends on on a ton of other things, all going back to how it's being used.

[@austinkirk6463]

I'm wondering if you can give me any advice on upgrade my Zv5s soft parts to handle more power and with more output? Would Nsv4 soft parts work and be a noticable amount more output then my all stock zv5. Man I have 3 15s that I'm dieing to poor some more money in too but need some help with my options.

[@austinwynn3327]

Austin Kirk check out the I just wanna bang page on Facebook it’s a basshead page there’s plenty of people that can help you out

[@chrisguscott9304]

hi EMF Audio,,im from New Zealand and ive just seen both vids for this sub build,,cool vids,,is it posable to put sub in a half box with a couple of 50 mm port holes on the sides ,no bottom for easy bolt on and off and play LPF bass from a song for a minute or two on med volume to hear how it sounds?? cheerz for the info vids

[@EMFAudio]

Half-ass enclosures gives half-ass results.

[@shenagray9687]

I wish I could afford to buy all the parts to build one of yall’s speakers just so I could say I put it together just curious how much would all the parts to build one cost

[@timbuckohfive2751]

Is it just me or is that magnet bigger than the woofer. If so how exactly do you make an enclosure for it.

[@akrs6398]

My question is how does it fit in a box?the magnet looks bigger than 10”

[@robertfattaruso1280]

Good Ol' BassMekanik test disc

[@1-Six-dee]

U have any experience with subs in a g35? About to build a single. Sub system for one always had suburbans I know what they like but this is one hell of a woofer

[@EMFAudio]

I know very little about a G35

[@eddiecampbell3514]

I have 2-12's by an old company similar to the one called digital designs , i cant seem to find any parts to rebuild them. Also have 3 sa12's I'd like to find a price sheet to order parts to rebuild them as well

[@EMFAudio]

We don't supply parts only, we do build them in house though.

[@10krms8]

What is the the rms limit on these frankenstein r any of the soft parts from the bannhamers been use in it

[@EMFAudio]

None of the parts are the same as a Banhammer.

[@karthikeyay2988]

And how do u put that sub in the enclosure HUGE MAGNET

[@ronalddevries5975]

With a spacer cut in half, magnet in then slide the spacer under the basket and your good to go 💪🏻

[@andreineghina8288]

amm yea i have an Magnat WSB 50 PRO sub at home but the amp it´s broken, how can i know how much watt does it take? how can i measure the watt?

[@PoXFreak]

Help me understand something: The SD of this woofer is listed as 63.617, whereas my AB xd1244 only measures out to 51.071. The reason I ask is because I'm building a mass-loaded T-line based off the listed T/S parameters for the sub as posted, and I want to make sure I'm not under-building an enclosure for it. Is the decrease in SD caused by a lack of xMax compared to this sub, or is it because the FS for that 10 is higher? Not using any computer program to do this, as Hornresp doesn't compute correctly below FS or F3 without loading the horn, and I plan on it being unloaded and tuned to 24hz, even though FS is listed as 35hz on the datasheet. Am I barking up the wrong Birch box here?

[@EMFAudio]

First things first, the sub in this video is considered a 10" which is really an 11" and you're comparing it to a 12" from a catalog pushing company that doesn't engineer or test anything. The Sd figure you're going off of appears to be for a 10" model. You're basing a design off of incorrect information. Even if it were the right size, I believe all their specs are out of the box, not broken in, so they'd be wrong anyway. Sd is the effective cone area, it has nothing to do with Xmax or Fs.

[@andregodbout5444]

I used to work for a satellite company which had a , if I remember well 15000 watts shaker speaker they used for testing unit reaction to vibration at different frequencies, the size was like (surround suspension) 6 feet and the surround was almost as thick as a tire... what a sub LOL...

[@lazerlinec1770]

That sounded so good dannnmm

[@Tuff_love]

Are you ever going to make a 10" neo subwoofer

[@EMFAudio]

If there was a demand for it, which there isn't. Maybe in the YOLO v2 I'd offer it but that's the only possibility since those are all built to order.

[@TheCryt3x]

Hey :) I know the video is a bit older but I'm curious how we can calculate sub specs by ourselves since some. Companies don't give out the real specs

[@EMFAudio]

It takes specialized equipment for that unless you want to do a ton of testing and math, not something you can do with a DMM and a calculator. It's funny you mention that because the next Tech Stuff Tuesday accidentally showcases that.

[@ItzjoshyVQ_37]

@@EMFAudio hey man I got power acoustik 2500D with a single kicker 10 in a atrend ported box how should I set my gain? It's for a friend

[@paulgreene6899]

I Wonder What's Tha' price for a custom-made?

[@jutin2001]

What do you use to test parameters? Do you have any experience with dats v2? Wondering how it compares to other test equipment.

[@EMFAudio]

We use a WT2, I've heard the DATS are inconsistent.

[@jutin2001]

@@EMFAudio I have Dats v2. I have noticed that if you do the added mass method of measurement the readings will change a bit with different amounts of added mass. So it definitely is a little inconsistent, but it gets the job done. I have built a couple subs and was curious, so I bought it. For $100 I figured it wouldn't be a horrible investment if I plan on building more. Was also curious how far off of spec some of the stuff I owned was. And have checked some cheaper subs with no listed parameters for a friend. For high volume manufacturing I would probably want something better, but for a quick measurement I feel it works well.

[@Boxjelly5150]

Damn that speaker is jumpin out far!

[@basslife4evr772]

And that was just the SPL SURROUND imagine if he had a MEGA ROLL SURROUND o my damn now that would be CRAZY (✌🏼💪🏼🔈💪🏼🔉💪🏼🔊)

[@EMFAudio]

It would be limited by the spider in the case of the megaroll. I'd also have to have a shorter pole cap or additional spacing to clear it.

[@austinkirk6463]

Hey it's me again. If you do have any suggestions on a rebuild for my zv5 15s. I have 3 of them and I'd love to ship them down your way if it's more realistic or reasonable then me just outright buying 3 totally different subs. I've actually only had these for bout 4 months. But I'm not really able to add more actual subs to my truck cause I'm a little tapped on space so this was my other option for getting louder

[@EMFAudio]

Contact us through our website www.emfcaraudio.com

[@WuClear]

Yay part 2 :)

[@guypatts494]

What's the power rating

[@servicetechokc]

How does the magnet even fit through the mounting hole?

[@EMFAudio]

That is answered here kzbin.info/www/bejne/noG6g4JjhKh0aNE

[@chadbeverly4926]

Could you do a video explaining xmax and why some sub can only go one way and other can go both ways and the effects it has ?

[@EMFAudio]

Every sub goes both ways.

[@chadbeverly4926]

@@EMFAudio but not the same amount as it goes forward or it wouldn't say one way , am i correct ?

[@EMFAudio]

@@chadbeverly4926 The only reason it wouldn't go as far one way as another is it was assembled extremely wrong, or it was designed so the coil smacks the back plate one direction and can move more the other direction.

[@chadbeverly4926]

EMF Audio so what do you mean when you say a sub has (?)Xmax “one way “ or in the case of the banhammer 35mm one way

[@EMFAudio]

@@chadbeverly4926 One direction is the industry standard for measuring Xmax. However, there are companies that post Xmax figures as peak to peak, or both ways. That number would simply be cut in half for one way. They don't always indicate it's peak to peak, so it's deceitful.

[@texasironforge.4913]

What's the max watts in rms I'm curious to know that

[@djnazgra]

over a million w rms

[@jhonydanadao7515]

Quanto fica um desse pro Brasil?

[@akaldipnarine2345]

How can i get a subwoofer like this

[@fukkyoutube]

are the 7 piece's of paper still in the coil?

[@EMFAudio]

No, shims are removed as mentioned.

[@paulcherry1520]

I'm glad I seen u glued the dust cap and sat it ontop and I was like aghhh nooooo the shims

[@mariussletvold6808]

4:30 thank me later

[@mikecheeze4312]

I'll thank you now

[@62dobie]

Thanks

[@BigBoyOGBassLife54]

Thank you

[@DesertRunner602]

I found this comment too late

[@firstnamelastnameisallowed7943]

My God just do the test!!! Holly crap!! Yapyapyapyap

[@xenaguy01]

4:30-5:00 There were a couple of times there that your engine idle speed was so low I thought it was gonna die. :) 7:20 I noticed in the slo-mo, the speaker rocks side-to-side, perfectly in sync with the in-out motion of the cone. Could that be due to a slight misalignment of the voice coil in the motor?

[@EMFAudio]

It's due to sitting on foam and the entire speaker moving. That much motion wouldn't be possible from a misalignment, you can't physically see a misalignment. Misaligned or not, the forward and rearward motion is the same, the weight balance isn't any different.

[@xenaguy01]

@@EMFAudio Foam, gotcha. My question was because, if the voice coil was off-center, the momentum would be concentrated on one side, and cause that -rocking motion- vibration. (shows up as rocking at super slo-mo)

[@EMFAudio]

@@xenaguy01 Momentum wouldn't be changed because it's still forward and backward, regardless of it's position.

[@xenaguy01]

EMF Audio But if the momentum is not centered, it affects one side more than the other, causing a vibration.

[@EMFAudio]

@@xenaguy01 Right, but the alignment has nothing to do with not being centered because that would mean the mass of the cone would be different on one side. The mass it the same around the entire cone. Because the mass is the same, the center of mass is in the middle, AKA centered.

[@michaelpaese9834]

Holy magnet , hopefully mfr doesn't rip the soft parts off the frame!

[@kcsavers]

Can you run through what the parameters are in a future video?

[@EMFAudio]

The customer has the subs so I can't do anything further with them.

[@davebarr1930]

How many watts do you think that thing could actually handle continuously?

[@oprisvlad3102]

On that coil, probably at 42-48 hz spl test i'd say over 8000...

[@EMFAudio]

5,000 is what Sundown rates the Team series at, that is the coil used in that motor so I'd safely say 5,000.

[@benmcintosh525]

How will it fit in the box if the magnets bigger

[@morganbills2749]

it will probably be mounted inverted (magnet up cone or "front" firing into box)

[@66tinindian]

Possibly will be mounted from behind. Maybe the back of the box comes off. Or possibly a split bushing that would attach to the speaker then be mounted in a box that has bigger holes.

[@MichaelBallardwormy]

If they were to try and use a tongue in groove style box face it could work

[@EMFAudio]

This is answered in this video kzbin.info/www/bejne/noG6g4JjhKh0aNE

[@boostjunkie2320]

That 10 is flexing on your 15s😂😂

[@tatsuo91]

How you control de Fs?

[@EMFAudio]

Suspension stiffness and moving mass.

[@BLRTUNING]

What would you guys charge to build one of these sub woofers

[@EMFAudio]

$1,450

[@aerialheights5680]

@@EMFAudio OK

[@bass-n-truth-inthestix9083]

Didn't you make a video explaining that "breaking in" subwoofers is a myth?

[@pmcalis1111]

BaSsAholiC he did but that video was showing that not playing the sub to its upper mechanical limits would unevenly break in the suspension...the “breaking in” myth is that the sub needs to be played on very low power for an an extended time...to pull parameters for a sub it needs to be played and have the suspension loosened because parameters change once suspension changes.

[@hispls]

Like the other guy said, TS parameters should shift 20% or so within the first few minutes of heavy excursion. They'll continue to shift pretty much forever after that but not by much. TS parameter changes are significant fresh parts vs. that 20 minutes of stretching. Definitely a pro move to soften things up a bit before pulling specs.

[@TheScottyp1]

no he said just break it in by using it

[@vuifong8008]

Can we use 2 same amp to 1 speakers, will it made more power or it will blow up the amp?

[@bigdaddynate8917]

yes you can

[@EMFAudio]

You can do that one amp per coil or you can strap amps if they are linkable.

[@vuifong8008]

I mean a single coil speakers.

[@EMFAudio]

@@vuifong8008 If the amps are strappable you could, but odds are a SVC sub won't handle that kind of power.

[@vuifong8008]

Thank you

[@lextr3110]

can we have the track of this sound hehehe so i can test mine

[@FATHERSOFBASS]

GREAT VIDEO SEAN... ALWAYS AWSOME... THANK YOU SIRRR

[@oprisvlad3102]

I have two questions! 1. What happens if the sub will make some mechanical noises? Will you recone it again and lose that money? 2. Why is that sensivity so low, I mean PA subwoofers are 4 or 5 times louder on the same wattage, what are the differences?

[@EMFAudio]

1. If there are mechanical noises it will get rebuilt at our cost. We do our best to ensure that isn't a problem during assembly and it's rare it happens. 2. That isn't exactly correct. PA subwoofers have a higher sensitivity rating, that doesn't make them louder. PA drivers are terrible at playing lows as well, the design method is totally different. In this case, this sub would play more like a PA driver but there isn't a PA 10" that will take the power this sub will. PA drivers also require a gigantic enclosure, this sub does not.

[@oprisvlad3102]

@@EMFAudio Thank you for the answer! I am not sure if this sub can go louder than a PA sub, esecially in long-range. I mean the custom sub is designed to throw bass 2 or 3 meters away you in a car, what about 50 meters outside? It is much more easier for a sub to play in the environment it was designed and that's why we cannnot really compare them. I am sorry if my second question was not understood but i asked only about the sensitivity. Have a good day!

[@EMFAudio]

@@oprisvlad3102 Sound projection has to do with wavelength and enclosure. If you take a PA sub and a car sub and you put them both outside and meter them from 100 ft away, the car sub isn't going to be silent because it's far away.

[@dnalrobyrbsbs2622]

My favority 10"

[@samuelthabah2643]

How much does it cost in Indian money?

[@justinroop5554]

Drill a hole in the top of your bench to slide the woofer onto for ventilation during the bench test.

[@brianlafave21]

So whats the rms and watts rating on this thing

[@basslife4evr772]

I bet it's around 2000k i think it would be more but the SPL SURROUND would probably rip off but at the same time u never know those SPL SURROUND are made to handle some POWER (✌🏼💪🏼🔈💪🏼🔉💪🏼🔊)

[@EMFAudio]

5,000 RMS.

[@ford1546]

Narrow and high surround foam or rubber is not the best. I think of side movements stability. have 1 spider is also not the best. I think of the mechanical stability when loading the loudspeaker with a lot of watts. Take some of the powerful PA speakers. They have 2 spiders. It is nice to have a powerful coil that can withstand 800watt but then the mechanical must withstand it.

[@EMFAudio]

There is more to it than shape, material matters too. This particular surround is very stable. When you say 1 spider, do you mean a single spider or a single pack compared to spaced spiders? This particular sub has 6 spiders but it's all 1 pack. Another factor among all this is coil mass, distance from spider to the bottom of the coil, and cone depth.

[@m.m.2896]

I

[@jasonhospedales3893]

What is the rms on this sub?

[@EMFAudio]

5,000 RMS

[@paulcherry1520]

@@EMFAudio how much for one ?

[@EMFAudio]

@@paulcherry1520 no longer for sale

[@mosessalazar7818]

Where do I go to purchase a sub like this

[@EMFAudio]

This is a custom build for a customer, not something we stock. Our website is www.emfcaraudio.com

[@joykills5433]

Resistance 3 ohms?

[@EMFAudio]

Dual 2 ohm nominal coils in series, DCR is a little lower, so you get 3 ohms in series.

[@joeydelmarsjr.646]

whats the best 15in subwoofer @ 1000-1500 rms with the most excursion. I looking for a competitive sub-woofer to but against svs ultra 16 driver

[@EMFAudio]

emfcaraudio.com/products/sundown-audio-x15-v2

[@joeydelmarsjr.646]

@@EMFAudio looks nice any chnace theres a 1 piece smooth cone with no dust cap?

[@EMFAudio]

@@joeydelmarsjr.646 The smooth part IS the dustcap. I know the SVS sub you're comparing. The X15 enclosure would have to be larger.

[@joeydelmarsjr.646]

@@EMFAudio for example the txx-bdc4-15, xr-15d4, and s2w15d4v2 all are smooth one piece with no middle dust cap. so your saying the whole cone is 1 giant dustcap?

[@EMFAudio]

@@joeydelmarsjr.646 The cone us under it, it's a giant dustcap that secures to the top of the cone.

[@streetstreet7406]

i want to buy this subwoofer i need 2 if you can answer me..plz realy

[@EMFAudio]

You can't buy it, those motors aren't made anymore.

[@CrashPCcz]

Maan, that motor looks like it is bigger than the basket. How is this going to be mounted? Reversed? According to specs, this beast could drive a 21" driver. Car audio people are crazy. :-D

[@EMFAudio]

kzbin.info/www/bejne/noG6g4JjhKh0aNE it's explained in that video.

[@venomvaping3883]

Your talking about saporting the channel by buying from the store in about a month when my engines back in my car i have a cart with about $3000 in it and i plan on getting all of it at once for my car lol. Them banhammer 15s i hope slam hard

[@Unknown-ek4nz]

Nice

[@adamwaugh5621]

How much did that cost

[@chrisguscott9304]

ive just saw a price tat EMF Audio had told sum1....... $1.450 usa dolla,,im from New Zealand so i dont know what it'l b for other countrys,,hope that helps adam :-)

[@MyBlowncobra]

She be strokin

[@by_a_tryhard_lol8901]

How much does a speaker like that cost ?

[@by_a_tryhard_lol8901]

Looking for something like that

[@EMFAudio]

It was custom made using parts that are no longer available.

[@elit3darkness]

Any experience with Brahma speakers?

[@EMFAudio]

Do you mean Brahma or Beyma?

[@elit3darkness]

@@EMFAudio Brahma by Adire Audio. My old buddy has an old version (purchased in 2004) which has some coil rub. We were thinking of disassembling and trying to diagnose it... You think it's still worth it?

[@EMFAudio]

@@elit3darkness The original Brahma, that was only in 1 size I have quite a bit of experience with. I had the first 2 ever made, I still have 1 I think. When it went to a line of subs which I think is what you're talking about, that was a different design all together and I've done nothing with those. Once you tear it apart it isn't usable again, so it's up to you if it's worth it to recone it to have it working again.

[@elit3darkness]

@@EMFAudio I guess down the rabbit hole we go lol

[@bigdaddynate8917]

how much would this run?

[@EMFAudio]

$1,450

[@meademorgan6614]

Why would sensitivity, not matter? I always heard that, the higher the sensitivity number the louder the speaker will play with less amplifier power. Also if you match the sensitivity of all your drivers, your entire system will play more nicely together. Meaning, you can run amp gains lower, and everything will peak around the same power usage without having to drive one amp harder than another. Is this correct, or have I been bullshitted for the last 20 years? 🤔

[@EMFAudio]

kzbin.info/www/bejne/jH_CopqAoNqgaJI You should watch that. As far as setting gains lower based on sensitivity, that's just ignorant. The gain is for matching the input of the amp to the voltage on the signal input. That's it. You'll likely never match the sensitivity of each speaker either. There isn't a need to do that anyway because you can adjust volume levels of each speaker to balance it out regardless. In short, you have been bullshitted in the worst way for the last 20 years.

[@gtgodbear6320]

I've never broke in any of my subs. Just strait to music.

[@scumbag7158]

I always just hook it up and play my normal music at 50/60% volume for a few days before I crank it up! 🔊🔊 never had a problem

[@scrappybadger4369]

the debate of wether or not to break in subs will never cease to exist as long a traditional subs are a thing haha. Personally, the closest thing I own to a subwoofer is a Ampeg ba 115v2 bass combo amp if that counts. 150 watts at 4 ohms (I think) running through a 15 inch woofer and a tweeter. shit is loud af for my standards. I just gotta find a way to hook it up to a battery and toss it in a car, it already has the amplifier built in. But yeah I'll stop rambling.

[@henryxavier3751]

👍cool man👍

[@ruikazane5123]

Sundown TEAM 10 Wait, what?! Hehehhee

[@pepearenas2828]

How much for one pair? $$$$

[@goddead3393]

El Monte Flores!

[@awaisbhullar6159]

What's made

[@riveralley]

Still weird but cool.

[@FATHERSOFBASS]

Oh and the notification bell doesnt work on your ch idk why but almost everytime i watch a video of yours i hit it and always says theres a problem going on

[@Oystein87]

Maybe you should build a little test bench to out it on that lifts it up from the table so it can vent out the back😋

[@EMFAudio]

It really isn't necessary for the purpose to have the vents open.

[@Oystein87]

@@EMFAudio I know🙂 But it would still be nice to have😋

[@Oystein87]

@Keith DeMons No.. Making a little testbench / frame to put the sub on. Not drilling a hole in the bench he got

[@EMFAudio]

@Keith DeMons There is no reason for a hole, or a mount or frame or anything. If there was, I would have already done it. That bench is 4 years old and never had a need for it.

[@hubcitytony2734]

I want to see it in a box

[@paulcherry1520]

How the hell can he put it in a box the magnet is bigger then the rim of the basket ?

[@hubcitytony2734]

@@paulcherry1520 some people be putting the sub facing the inside of the box with the magnet outside, that's how they put it in a box

[@paulcherry1520]

@@hubcitytony2734 yea inverted but if it was the normal way how could they do it maybe like a 2 pieced baffle

[@alvertozavala3406]

Mi sa-8 excuersiona mas :C.

[@DjJoeEmeric]

magnet bigger than the speaker , so it will not fit in the hole :))))

[@bournelucid]

External mounts

[@PlatinumEagleStudios]

This is why you invert mount the woofer. Have you ever seen inverted subwoofers before?

[@kevindegarmo7003]

Holy S#!t how the hell do you mount a speaker with a motor that is bigger than the surrounding?

[@RWL2012]

inverted, or internal mount

[@davidhull2032]

Can you build me one. I want a team 10

[@EMFAudio]

I can! Contact us through our website to arrange payment and we'll get it on the build list.

[@sarahmiller5718]

Hey bud so your youtube account says "kzbin.info" what did that mean if anything

[@EMFAudio]

Nothing of significance.

[@officialgru420]

How the fuck do you get that into the box

[@Facelessman42001]

Your client is a Rocker isn't he?? 🤘🏻🤘🏼🤘🏽🤘🏾🤘🏿😈👍🏻👍🏼👍🏽👍🏾👍🏿🇺🇸🇮🇱

[@PlatinumEagleStudios]

Do you want a little more basket for that magnet? Jesus fucking Christ that magnet to basket ratio is out of this world

[@EMFAudio]

That would make it a different size, and that isn't the size he needed.

[@kiiarahasnosynonyms]

🤠